@@ -52,6 +52,13 @@
#define APPS_USB_AVG_BW 0
#define APPS_USB_PEAK_BW MBps_to_icc(40)
+static const u32 pwr_evnt_irq_stat_reg[DWC3_MAX_PORTS] = {
+ 0x58,
+ 0x1dc,
+ 0x228,
+ 0x238,
+};
+
struct dwc3_qcom_port {
int qusb2_phy_irq;
int dp_hs_phy_irq;
@@ -421,9 +428,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
if (qcom->is_suspended)
return 0;
- val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
- if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
- dev_err(qcom->dev, "HS-PHY not in L2\n");
+ for (i = 0; i < qcom->num_ports; i++) {
+ val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg[i]);
+ if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
+ dev_err(qcom->dev, "port-%d HS-PHY not in L2\n", i + 1);
+ }
for (i = qcom->num_clocks - 1; i >= 0; i--)
clk_disable_unprepare(qcom->clks[i]);
@@ -471,9 +480,12 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
if (ret)
dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
+ for (i = 0; i < qcom->num_ports; i++) {
/* Clear existing events from PHY related to L2 in/out */
- dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
- PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+ dwc3_qcom_setbits(qcom->qscratch_base,
+ pwr_evnt_irq_stat_reg[i],
+ PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+ }
qcom->is_suspended = false;
Power event IRQ is used for wakeup in cases: a) where the controller is super speed capable and missing an ss_phy interrupt. b) where the GIC is not capable of detecting DP/DM hs phy irq's. Power event IRQ stat register indicates whether high speed phy entered and exited L2 successfully during suspend and resume. Indicate the same for all ports of multiport. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> --- drivers/usb/dwc3/dwc3-qcom.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)