@@ -319,6 +319,7 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
unsigned char timing = host->mmc->ios.timing;
u32 otap_del_sel;
u32 itap_del_ena;
+ u32 itap_del_sel;
u32 mask, val;
/* Setup Output TAP delay */
@@ -328,13 +329,18 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
val = (0x1 << OTAPDLYENA_SHIFT) |
(otap_del_sel << OTAPDLYSEL_SHIFT);
+ /* Setup Input TAP delay */
itap_del_ena = sdhci_am654->itap_del_ena[timing];
+ itap_del_sel = sdhci_am654->itap_del_sel[timing];
- mask |= ITAPDLYENA_MASK;
- val |= (itap_del_ena << ITAPDLYENA_SHIFT);
+ mask |= ITAPDLYENA_MASK | ITAPDLYSEL_MASK;
+ val |= (itap_del_ena << ITAPDLYENA_SHIFT) |
+ (itap_del_sel << ITAPDLYSEL_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK,
+ 1 << ITAPCHGWIN_SHIFT);
regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
-
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK, 0);
regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK,
sdhci_am654->clkbuf_sel);
Add ITAPDLYSEL to sdhci_j721e_4bit_set_clock function. This allows to set the correct ITAPDLY for timings that do not carry out tuning. Fixes: 1accbced1c32 ("mmc: sdhci_am654: Add Support for 4 bit IP on J721E") Signed-off-by: Judith Mendez <jm@ti.com> --- Changelog: v2->v3: - no change --- drivers/mmc/host/sdhci_am654.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)