@@ -18,6 +18,7 @@
#include <linux/of_device.h>
#include <linux/delay.h>
#include <linux/mmc/mmc.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include "sdhci-pltfm.h"
@@ -658,12 +659,26 @@ static int sdhci_msm_probe(struct platform_device *pdev)
goto clk_disable;
}
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+ pm_runtime_use_autosuspend(&pdev->dev);
+
ret = sdhci_add_host(host);
if (ret)
- goto clk_disable;
+ goto pm_runtime_disable;
+
+ platform_set_drvdata(pdev, host);
+
+ pm_runtime_put_autosuspend(&pdev->dev);
return 0;
+pm_runtime_disable:
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
clk_disable:
clk_disable_unprepare(msm_host->clk);
pclk_disable:
@@ -685,6 +700,11 @@ static int sdhci_msm_remove(struct platform_device *pdev)
0xffffffff);
sdhci_remove_host(host, dead);
+
+ pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
clk_disable_unprepare(msm_host->clk);
clk_disable_unprepare(msm_host->pclk);
if (!IS_ERR(msm_host->bus_clk))
@@ -693,12 +713,56 @@ static int sdhci_msm_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+static int sdhci_msm_runtime_suspend(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+
+ clk_disable_unprepare(msm_host->clk);
+ clk_disable_unprepare(msm_host->pclk);
+
+ return 0;
+}
+
+static int sdhci_msm_runtime_resume(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ int ret;
+
+ ret = clk_prepare_enable(msm_host->clk);
+ if (ret) {
+ dev_err(dev, "clk_enable failed: %d\n", ret);
+ return ret;
+ }
+ ret = clk_prepare_enable(msm_host->pclk);
+ if (ret) {
+ dev_err(dev, "clk_enable failed: %d\n", ret);
+ clk_disable_unprepare(msm_host->clk);
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops sdhci_msm_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(sdhci_msm_runtime_suspend, sdhci_msm_runtime_resume,
+ NULL)
+};
+
static struct platform_driver sdhci_msm_driver = {
.probe = sdhci_msm_probe,
.remove = sdhci_msm_remove,
.driver = {
.name = "sdhci_msm",
.of_match_table = sdhci_msm_dt_match,
+ .pm = &sdhci_msm_pm_ops,
},
};
Provides runtime PM callbacks to enable and disable clock resources when idle. Also support system PM callbacks to be called during system suspend and resume. Signed-off-by: Pramod Gurav <pramod.gurav@linaro.org> --- Tested on DB410C. Changes in v4: - Remove calls to sdhci_runtime_resume_host/sdhci_runtime_suspend_host from runtime callbacks as sdhc msm controller is capable of restoring it's register values after clocks are disabled and re-enabled. Changes in v3: - Added CONFIG_PM around runtime pm function. - Replaced msm suspend/resume with generic function directly - Use SET_SYSTEM_SLEEP_PM_OPS instead of late version Changes in v2: - Moved pm_rutime enabling before adding host - Handled pm_rutime in remove - Changed runtime handling with reference from sdhci-of-at91.c drivers/mmc/host/sdhci-msm.c | 66 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 65 insertions(+), 1 deletion(-) -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html