diff mbox series

[v8,30/38] media: Documentation: ccs: Document routing

Message ID 20240313072516.241106-31-sakari.ailus@linux.intel.com
State New
Headers show
Series [v8,01/38] media: mc: Add INTERNAL pad flag | expand

Commit Message

Sakari Ailus March 13, 2024, 7:25 a.m. UTC
Document which routes are available for the CCS driver (source) sub-device
and what configuration are possible.

Also update copyright.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 .../userspace-api/media/drivers/ccs.rst       | 34 ++++++++++++++++++-
 .../media/v4l/subdev-formats.rst              |  2 ++
 2 files changed, 35 insertions(+), 1 deletion(-)

Comments

Laurent Pinchart March 21, 2024, 5:43 p.m. UTC | #1
Hi Sakari,

Thank you for the patch.

On Wed, Mar 13, 2024 at 09:25:08AM +0200, Sakari Ailus wrote:
> Document which routes are available for the CCS driver (source) sub-device
> and what configuration are possible.
> 
> Also update copyright.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
>  .../userspace-api/media/drivers/ccs.rst       | 34 ++++++++++++++++++-
>  .../media/v4l/subdev-formats.rst              |  2 ++
>  2 files changed, 35 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/userspace-api/media/drivers/ccs.rst b/Documentation/userspace-api/media/drivers/ccs.rst
> index 03015b33d5ab..bc2804ec663b 100644
> --- a/Documentation/userspace-api/media/drivers/ccs.rst
> +++ b/Documentation/userspace-api/media/drivers/ccs.rst
> @@ -111,4 +111,36 @@ than in the centre.
>  Shading correction needs to be enabled for luminance correction level to have an
>  effect.
>  
> -**Copyright** |copy| 2020 Intel Corporation
> +.. _media-ccs-routes:
> +
> +Routes
> +------
> +
> +The CCS driver implements one or two :ref:`routes <subdev-routing>` in
> +its source sub-device (scaler sub-device if exists for the device, otherwise
> +binner) depending on whether the sensor supports embedded data. (All CCS
> +compliant sensors do but the CCS driver supports preceding standards that did
> +not require embedded data support, too.)

s/too.)/too).

> +
> +The first route of the CCS source sub-device is for pixel data (internal pad
> +1/stream 0 -> pad 0/stream 0) and the second one is for embedded data (internal

I thought the source subdev had one external sink pad for image data,
one internal sink pad for embedded data, and one source pad.

> +pad 2/stream 0 -> pad 0/stream 1).
> +
> +Embedded data
> +~~~~~~~~~~~~~
> +
> +MIPI CCS supports generation of camera sensor embedded data. The media bus code
> +used for this format is :ref:`MEDIA_BUS_FMT_CCS_EMBEDDDED
> +<MEDIA-BUS-FMT-CCS-EMBEDDED>`.

Maybe state that this is the format on the internal ED sink pad.

> +
> +The bit depth of the CCS pixel data affects how the sensor will output the
> +embedded data, adding padding to align with CSI-2 bus :ref:`Data units
> +<media-glossary-data-unit>` for that particular bit depth. This is indicated by
> +the generic metadata format on the sensor's source sub-device's source pad.
> +
> +Embedded data for bit depths greater than or equal to 16 may support more dense
> +packing or legacy single metadata byte per data unit, or both of these,
> +depending on the device. The supported embedded data formats can be enumerated
> +and configured on stream 1 of the source pad (1) of the CCS source sub-device.
> +
> +**Copyright** |copy| 2020, 2023 Intel Corporation

2024 ?

> diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst
> index c8f982411e70..ca4da6a400ff 100644
> --- a/Documentation/userspace-api/media/v4l/subdev-formats.rst
> +++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst
> @@ -8592,3 +8592,5 @@ levels above.
>  This mbus code are only used for "2-byte simplified tagged data format" (code
>  0xa) but their use may be extended further in the future, to cover other CCS
>  embedded data format codes.
> +
> +Also see :ref:`CCS driver documentation <media-ccs-routes>`.
diff mbox series

Patch

diff --git a/Documentation/userspace-api/media/drivers/ccs.rst b/Documentation/userspace-api/media/drivers/ccs.rst
index 03015b33d5ab..bc2804ec663b 100644
--- a/Documentation/userspace-api/media/drivers/ccs.rst
+++ b/Documentation/userspace-api/media/drivers/ccs.rst
@@ -111,4 +111,36 @@  than in the centre.
 Shading correction needs to be enabled for luminance correction level to have an
 effect.
 
-**Copyright** |copy| 2020 Intel Corporation
+.. _media-ccs-routes:
+
+Routes
+------
+
+The CCS driver implements one or two :ref:`routes <subdev-routing>` in
+its source sub-device (scaler sub-device if exists for the device, otherwise
+binner) depending on whether the sensor supports embedded data. (All CCS
+compliant sensors do but the CCS driver supports preceding standards that did
+not require embedded data support, too.)
+
+The first route of the CCS source sub-device is for pixel data (internal pad
+1/stream 0 -> pad 0/stream 0) and the second one is for embedded data (internal
+pad 2/stream 0 -> pad 0/stream 1).
+
+Embedded data
+~~~~~~~~~~~~~
+
+MIPI CCS supports generation of camera sensor embedded data. The media bus code
+used for this format is :ref:`MEDIA_BUS_FMT_CCS_EMBEDDDED
+<MEDIA-BUS-FMT-CCS-EMBEDDED>`.
+
+The bit depth of the CCS pixel data affects how the sensor will output the
+embedded data, adding padding to align with CSI-2 bus :ref:`Data units
+<media-glossary-data-unit>` for that particular bit depth. This is indicated by
+the generic metadata format on the sensor's source sub-device's source pad.
+
+Embedded data for bit depths greater than or equal to 16 may support more dense
+packing or legacy single metadata byte per data unit, or both of these,
+depending on the device. The supported embedded data formats can be enumerated
+and configured on stream 1 of the source pad (1) of the CCS source sub-device.
+
+**Copyright** |copy| 2020, 2023 Intel Corporation
diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst
index c8f982411e70..ca4da6a400ff 100644
--- a/Documentation/userspace-api/media/v4l/subdev-formats.rst
+++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -8592,3 +8592,5 @@  levels above.
 This mbus code are only used for "2-byte simplified tagged data format" (code
 0xa) but their use may be extended further in the future, to cover other CCS
 embedded data format codes.
+
+Also see :ref:`CCS driver documentation <media-ccs-routes>`.