@@ -487,9 +487,6 @@ slpi_smp2p_in: slave-kernel {
thermal-zones {
cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 1>;
trips {
@@ -508,9 +505,6 @@ cpu0_crit: cpu-crit {
};
cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 2>;
trips {
@@ -529,9 +523,6 @@ cpu1_crit: cpu-crit {
};
cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 3>;
trips {
@@ -550,9 +541,6 @@ cpu2_crit: cpu-crit {
};
cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 4>;
trips {
@@ -571,9 +559,6 @@ cpu3_crit: cpu-crit {
};
cpu4-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 7>;
trips {
@@ -592,9 +577,6 @@ cpu4_crit: cpu-crit {
};
cpu5-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 8>;
trips {
@@ -613,9 +595,6 @@ cpu5_crit: cpu-crit {
};
cpu6-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 9>;
trips {
@@ -634,9 +613,6 @@ cpu6_crit: cpu-crit {
};
cpu7-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 10>;
trips {
@@ -655,9 +631,6 @@ cpu7_crit: cpu-crit {
};
gpu-bottom-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 12>;
trips {
@@ -670,9 +643,6 @@ gpu1_alert0: trip-point0 {
};
gpu-top-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 13>;
trips {
@@ -685,9 +655,6 @@ gpu2_alert0: trip-point0 {
};
clust0-mhm-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 5>;
trips {
@@ -700,9 +667,6 @@ cluster0_mhm_alert0: trip-point0 {
};
clust1-mhm-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 6>;
trips {
@@ -715,9 +679,6 @@ cluster1_mhm_alert0: trip-point0 {
};
cluster1-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens0 11>;
trips {
@@ -730,9 +691,6 @@ cluster1_l2_alert0: trip-point0 {
};
modem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 1>;
trips {
@@ -745,9 +703,6 @@ modem_alert0: trip-point0 {
};
mem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 2>;
trips {
@@ -760,9 +715,6 @@ mem_alert0: trip-point0 {
};
wlan-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 3>;
trips {
@@ -775,9 +727,6 @@ wlan_alert0: trip-point0 {
};
q6-dsp-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 4>;
trips {
@@ -790,9 +739,6 @@ q6_dsp_alert0: trip-point0 {
};
camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 5>;
trips {
@@ -805,9 +751,6 @@ camera_alert0: trip-point0 {
};
multimedia-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&tsens1 6>;
trips {
@@ -10,9 +10,6 @@
/ {
thermal-zones {
pm8998-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
thermal-sensors = <&pm8998_temp>;
trips {
All of the thermal zone suppliers are interrupt-driven, remove the bogus and unnecessary polling that only wastes CPU time. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 57 ----------------------------------- arch/arm64/boot/dts/qcom/pm8998.dtsi | 3 -- 2 files changed, 60 deletions(-)