| Message ID | 20240321134956.7731-1-five231003@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: spi: convert spi-jcore to dtschema | expand |
On 21/03/2024 14:47, Kousik Sanagavarapu wrote: > Convert existing bindings of J-Core spi2 to dtschema. No new properties > are added. Subject: spi: dt-bindings: jcore,spi: > > Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com> > --- > .../devicetree/bindings/spi/jcore,spi.txt | 34 ----------- > .../devicetree/bindings/spi/jcore,spi.yaml | 60 +++++++++++++++++++ > 2 files changed, 60 insertions(+), 34 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/spi/jcore,spi.txt > create mode 100644 Documentation/devicetree/bindings/spi/jcore,spi.yaml > > diff --git a/Documentation/devicetree/bindings/spi/jcore,spi.yaml b/Documentation/devicetree/bindings/spi/jcore,spi.yaml > new file mode 100644 > index 000000000000..e76775bb68d4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/spi/jcore,spi.yaml > @@ -0,0 +1,60 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > + > +$id: http://devicetree.org/schemas/spi/jcore,spi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: J-Core SPI controller > + > +description: | Do not need '|' unless you need to preserve formatting. > + The J-Core "spi2" device is a PIO-based SPI controller which used to > + perform byte-at-a-time transfers between the CPU and itself. > + > +maintainers: > + - Kousik Sanagavarapu <five231003@gmail.com> > + > +allOf: > + - $ref: spi-controller.yaml# > + > +properties: > + compatible: > + const: jcore,spi2 > + > + reg: > + maxItems: 1 > + > + clocks: > + description: > + If a phandle named "ref_clk" is present, SPI clock speed > + programming is relative to the frequency of the indicated clock. > + Necessary only if the input clock rate is something other than a > + fixed 50 MHz. > + > + clock-names: > + description: > + Clock names, one for each phandle in clocks. Drop description, but instead provide a name. See existing code. > + > + "#address-cells": > + const: 1 Drop > + > + "#size-cells": > + const: 0 Drop Please do not write bindings in entirely different way than existing ones are written. Open existing recent bindings and look there. > + > +required: > + - compatible > + - reg > + > +additionalProperties: true This cannot be true. From which existing code did you take it? What you need here is unevaluatedProperties: false. > + > +examples: > + - | > + spi@40 { > + compatible = "jcore,spi2"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x40 0x8>; Keep reg the second property. > + spi-max-frequency = <25000000>; > + clocks = <&bus_clk>; > + clock-names = "ref_clk"; > + }; Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/spi/jcore,spi.txt b/Documentation/devicetree/bindings/spi/jcore,spi.txt deleted file mode 100644 index 93936d16e139..000000000000 --- a/Documentation/devicetree/bindings/spi/jcore,spi.txt +++ /dev/null @@ -1,34 +0,0 @@ -J-Core SPI master - -Required properties: - -- compatible: Must be "jcore,spi2". - -- reg: Memory region for registers. - -- #address-cells: Must be 1. - -- #size-cells: Must be 0. - -Optional properties: - -- clocks: If a phandle named "ref_clk" is present, SPI clock speed - programming is relative to the frequency of the indicated clock. - Necessary only if the input clock rate is something other than a - fixed 50 MHz. - -- clock-names: Clock names, one for each phandle in clocks. - -See spi-bus.txt for additional properties not specific to this device. - -Example: - -spi@40 { - compatible = "jcore,spi2"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x40 0x8>; - spi-max-frequency = <25000000>; - clocks = <&bus_clk>; - clock-names = "ref_clk"; -} diff --git a/Documentation/devicetree/bindings/spi/jcore,spi.yaml b/Documentation/devicetree/bindings/spi/jcore,spi.yaml new file mode 100644 index 000000000000..e76775bb68d4 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/jcore,spi.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/spi/jcore,spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: J-Core SPI controller + +description: | + The J-Core "spi2" device is a PIO-based SPI controller which used to + perform byte-at-a-time transfers between the CPU and itself. + +maintainers: + - Kousik Sanagavarapu <five231003@gmail.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: jcore,spi2 + + reg: + maxItems: 1 + + clocks: + description: + If a phandle named "ref_clk" is present, SPI clock speed + programming is relative to the frequency of the indicated clock. + Necessary only if the input clock rate is something other than a + fixed 50 MHz. + + clock-names: + description: + Clock names, one for each phandle in clocks. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + +additionalProperties: true + +examples: + - | + spi@40 { + compatible = "jcore,spi2"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40 0x8>; + spi-max-frequency = <25000000>; + clocks = <&bus_clk>; + clock-names = "ref_clk"; + };
Convert existing bindings of J-Core spi2 to dtschema. No new properties are added. Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com> --- .../devicetree/bindings/spi/jcore,spi.txt | 34 ----------- .../devicetree/bindings/spi/jcore,spi.yaml | 60 +++++++++++++++++++ 2 files changed, 60 insertions(+), 34 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/jcore,spi.txt create mode 100644 Documentation/devicetree/bindings/spi/jcore,spi.yaml