diff mbox series

[4/8] media: platform: ti: use for_each_endpoint_of_node()

Message ID 87wmpr57uw.wl-kuninori.morimoto.gx@renesas.com
State New
Headers show
Series use for_each_endpoint_of_node() | expand

Commit Message

Kuninori Morimoto March 25, 2024, 3:05 a.m. UTC
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 drivers/media/platform/ti/am437x/am437x-vpfe.c   |  8 +++-----
 drivers/media/platform/ti/davinci/vpif_capture.c | 11 +++++------
 2 files changed, 8 insertions(+), 11 deletions(-)

Comments

Kuninori Morimoto March 25, 2024, 11:25 p.m. UTC | #1
Hi Dan

> > We already have for_each_endpoint_of_node(), don't use
> > of_graph_get_next_endpoint() directly. Replace it.
> > 
> > Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> > ---
(snip)
> > -	for (i = 0; ; i++) {
> > +	for_each_endpoint_of_node(dev->of_node, endpoint) {
> >  		struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
> >  		struct device_node *rem;
> >  
> > -		endpoint = of_graph_get_next_endpoint(dev->of_node, endpoint);
> > -		if (!endpoint)
> > -			break;
> > -
> >  		sdinfo = &pdata->sub_devs[i];
>                                           ^
> "i" is uninitialized now.
> 
> Also in the initializer it has "struct device_node *endpoint = NULL;"
> which is unnecessary now.  And at the end it has:
> 
> 	of_node_put(endpoint);
> 	return pdata;
> 
> Since endpoint is NULL this was always a pointless no-op but now it's
> more obvious, so lets delete that.

Thank you for pointing it.
I will wait other feedback, and post v2 patch in next week.

Best regards
---
Renesas Electronics
Ph.D. Kuninori Morimoto
diff mbox series

Patch

diff --git a/drivers/media/platform/ti/am437x/am437x-vpfe.c b/drivers/media/platform/ti/am437x/am437x-vpfe.c
index 77e12457d149..4f185a0d42b3 100644
--- a/drivers/media/platform/ti/am437x/am437x-vpfe.c
+++ b/drivers/media/platform/ti/am437x/am437x-vpfe.c
@@ -2306,14 +2306,10 @@  vpfe_get_pdata(struct vpfe_device *vpfe)
 	if (!pdata)
 		return NULL;
 
-	for (i = 0; ; i++) {
+	for_each_endpoint_of_node(dev->of_node, endpoint) {
 		struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
 		struct device_node *rem;
 
-		endpoint = of_graph_get_next_endpoint(dev->of_node, endpoint);
-		if (!endpoint)
-			break;
-
 		sdinfo = &pdata->sub_devs[i];
 		sdinfo->grp_id = 0;
 
@@ -2371,6 +2367,8 @@  vpfe_get_pdata(struct vpfe_device *vpfe)
 		of_node_put(rem);
 		if (IS_ERR(pdata->asd[i]))
 			goto cleanup;
+
+		i++;
 	}
 
 	of_node_put(endpoint);
diff --git a/drivers/media/platform/ti/davinci/vpif_capture.c b/drivers/media/platform/ti/davinci/vpif_capture.c
index c31a5566fc5a..8b7077a265e6 100644
--- a/drivers/media/platform/ti/davinci/vpif_capture.c
+++ b/drivers/media/platform/ti/davinci/vpif_capture.c
@@ -1517,16 +1517,11 @@  vpif_capture_get_pdata(struct platform_device *pdev,
 	if (!pdata->subdev_info)
 		return NULL;
 
-	for (i = 0; i < VPIF_CAPTURE_NUM_CHANNELS; i++) {
+	for_each_endpoint_of_node(pdev->dev.of_node, endpoint) {
 		struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
 		unsigned int flags;
 		int err;
 
-		endpoint = of_graph_get_next_endpoint(pdev->dev.of_node,
-						      endpoint);
-		if (!endpoint)
-			break;
-
 		rem = of_graph_get_remote_port_parent(endpoint);
 		if (!rem) {
 			dev_dbg(&pdev->dev, "Remote device at %pOF not found\n",
@@ -1577,6 +1572,10 @@  vpif_capture_get_pdata(struct platform_device *pdev,
 			goto err_cleanup;
 
 		of_node_put(rem);
+
+		i++;
+		if (i >= VPIF_CAPTURE_NUM_CHANNELS)
+			break;
 	}
 
 done: