| Message ID | 20240325201031.10837-2-quic_pradeepc@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | wifi: ath12k: add MU-MIMO and 160 MHz bandwidth support | expand |
On 3/25/2024 1:10 PM, Pradeep Kumar Chitrapu wrote: > Add flag for Full Bandwidth UL MU-MIMO for EHT. This is utilized > to pass EHT MU-MIMO configurations from user space to driver in > AP mode. > > Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 > > Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
On Tue, 2024-03-26 at 11:31 -0700, Pradeep Kumar Chitrapu wrote: > > On 3/26/2024 6:00 AM, Johannes Berg wrote: > > On Mon, 2024-03-25 at 13:10 -0700, Pradeep Kumar Chitrapu wrote: > > > Add flag for Full Bandwidth UL MU-MIMO for EHT. This is utilized > > > to pass EHT MU-MIMO configurations from user space to driver in > > > AP mode. > > > > This ^^ doesn't match this: > > > > > + * @eht_80mhz_full_bw_ul_mumimo: does this BSS support the reception (AP) or transmission > > > + * (non-AP STA) of an EHT TB PPDU on an RU that spans the entire PPDU > > > + * bandwidth > > > > > > > which doesn't match the implementation ... Wouldn't be a bad idea to > > actually do what it documents though, I guess? > > > Thanks Johannes for review. > can you please help clarify what you meant by "actually do what it > documents"? This will help me to amend next revision appropriately. > > I have tried to describe what this flag is trying to represent. Yes but ... you document AP and non-AP STA, but only implemented it for AP? johannes
On Tue, 2024-03-26 at 11:36 -0700, Pradeep Kumar Chitrapu wrote: > > > > Yes but ... you document AP and non-AP STA, but only implemented it for > > AP? > > > > johannes > Sure. Thanks. will fix this in next revision. > We got to v3 and you didn't? johannes
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 353488ab94a2..54bd2a988d91 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -701,6 +701,9 @@ struct ieee80211_fils_discovery { * beamformee * @eht_mu_beamformer: in AP-mode, does this BSS enable operation as an EHT MU * beamformer + * @eht_80mhz_full_bw_ul_mumimo: does this BSS support the reception (AP) or transmission + * (non-AP STA) of an EHT TB PPDU on an RU that spans the entire PPDU + * bandwidth */ struct ieee80211_bss_conf { struct ieee80211_vif *vif; @@ -793,6 +796,7 @@ struct ieee80211_bss_conf { bool eht_su_beamformer; bool eht_su_beamformee; bool eht_mu_beamformer; + bool eht_80mhz_full_bw_ul_mumimo; }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index f03452dc716d..894c7b6ddb0a 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1379,6 +1379,11 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, (IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_80MHZ | IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_160MHZ | IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_320MHZ); + link_conf->eht_80mhz_full_bw_ul_mumimo = + params->eht_cap->fixed.phy_cap_info[7] & + (IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_80MHZ | + IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_160MHZ | + IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_320MHZ); } else { link_conf->eht_su_beamformer = false; link_conf->eht_su_beamformee = false;
Add flag for Full Bandwidth UL MU-MIMO for EHT. This is utilized to pass EHT MU-MIMO configurations from user space to driver in AP mode. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> --- include/net/mac80211.h | 4 ++++ net/mac80211/cfg.c | 5 +++++ 2 files changed, 9 insertions(+)