diff mbox series

[2/3] dt-bindings: display: panel: visionox,vtdr6130: Add mode property

Message ID 20240328111158.2074351-2-jun.nie@linaro.org
State New
Headers show
Series None | expand

Commit Message

Jun Nie March 28, 2024, 11:11 a.m. UTC
Add DSI mode property and compression mode property

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 .../bindings/display/panel/visionox,vtdr6130.yaml         | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Krzysztof Kozlowski March 29, 2024, 12:47 p.m. UTC | #1
On 28/03/2024 12:11, Jun Nie wrote:
> Add DSI mode property and compression mode property
> 
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
>  .../bindings/display/panel/visionox,vtdr6130.yaml         | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC. It might happen, that command when run on an older
kernel, gives you outdated entries. Therefore please be sure you base
your patches on recent Linux kernel.

Tools like b4 or scripts/get_maintainer.pl provide you proper list of
people, so fix your workflow. Tools might also fail if you work on some
ancient tree (don't, instead use mainline), work on fork of kernel
(don't, instead use mainline) or you ignore some maintainers (really
don't). Just use b4 and everything should be fine, although remember
about `b4 prep --auto-to-cc` if you added new patches to the patchset.

You missed at least devicetree list (maybe more), so this won't be
tested by automated tooling. Performing review on untested code might be
a waste of time, thus I will skip this patch entirely till you follow
the process allowing the patch to be tested.

Please kindly resend and include all necessary To/Cc entries.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml
index d5a8295106c1..36ae94fa96ec 100644
--- a/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml
+++ b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml
@@ -26,6 +26,14 @@  properties:
   port: true
   reset-gpios: true
 
+  enforce-cmd-mode:
+    type: boolean
+    description: Set DSI as command mode. Video mode by default.
+
+  enable-dsc:
+    type: boolean
+    description: Enable display stream compression
+
 additionalProperties: false
 
 required: