diff mbox series

arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller

Message ID 20240328022224.336938-1-luzmaximilian@gmail.com
State Accepted
Commit ecda8309098402f878c96184f29a1b7ec682d772
Headers show
Series arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller | expand

Commit Message

Maximilian Luz March 28, 2024, 2:21 a.m. UTC
The ACPI DSDT of the Surface Pro X (SQ2) specifies the interrupts for
the secondary UBS controller as

    Name (_CRS, ResourceTemplate ()
    {
        Interrupt (ResourceConsumer, Level, ActiveHigh, Shared, ,, )
        {
            0x000000AA,
        }
        Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
        {
            0x000000A7,     // hs_phy_irq: &intc GIC_SPI 136
        }
        Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
        {
            0x00000228,     // ss_phy_irq: &pdc 40
        }
        Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
        {
            0x0000020A,     // dm_hs_phy_irq: &pdc 10
        }
        Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
        {
            0x0000020B,     // dp_hs_phy_irq: &pdc 11
        }
    })

Generally, the interrupts above 0x200 map to the PDC interrupts (as used
in the devicetree) as ACPI_NUMBER - 0x200. Note that this lines up with
dm_hs_phy_irq and dp_hs_phy_irq (as well as the interrupts for the
primary USB controller).

Based on the snippet above, ss_phy_irq should therefore be PDC 40 (=
0x28) and not PDC 7. The latter is according to ACPI instead used as
ss_phy_irq for port 0 of the multiport USB controller). Fix this by
setting ss_phy_irq to '&pdc 40'.

Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 32afc78d5b769..053f7861c3cec 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2701,7 +2701,7 @@  usb_sec: usb@a8f8800 {
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 			power-domains = <&gcc USB30_SEC_GDSC>;
 			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 40 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",