[v2,3/5] dts: meson: Drop redundant GXL, GXM & AXG devicetree files

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d85a33055c..135e08df3c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -220,19 +220,6 @@  dtb-$(CONFIG_ARCH_S5P4418) += \
 
 dtb-$(CONFIG_ARCH_MESON) += \
 	meson-a1-ad401.dtb \
-	meson-axg-s400.dtb \
-	meson-axg-jethome-jethub-j100.dtb \
-	meson-gxl-s805x-libretech-ac.dtb \
-	meson-gxl-s905d-libretech-pc.dtb \
-	meson-gxl-s905w-jethome-jethub-j80.dtb \
-	meson-gxl-s905x-khadas-vim.dtb \
-	meson-gxl-s905x-libretech-cc.dtb \
-	meson-gxl-s905x-libretech-cc-v2.dtb \
-	meson-gxl-s905x-p212.dtb \
-	meson-gxm-gt1-ultimate.dtb \
-	meson-gxm-khadas-vim2.dtb \
-	meson-gxm-s912-libretech-pc.dtb \
-	meson-gxm-wetek-core2.dtb \
 	meson-g12a-radxa-zero.dtb \
 	meson-g12a-sei510.dtb \
 	meson-g12a-u200.dtb \
diff --git a/arch/arm/dts/meson-axg-jethome-jethub-j100.dts b/arch/arm/dts/meson-axg-jethome-jethub-j100.dts
deleted file mode 100644
index 5783732dc6..0000000000
--- a/arch/arm/dts/meson-axg-jethome-jethub-j100.dts
+++ /dev/null
@@ -1,361 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
- * Copyright (c) 2020 JetHome
- * Author: Aleksandr Kazantsev <ak@tvip.ru>
- * Author: Alexey Shevelkin <ash@tvip.ru>
- * Author: Vyacheslav Bocharov <adeep@lexina.in>
- */
-
-/dts-v1/;
-
-#include "meson-axg.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg";
-	model = "JetHome JetHub J100";
-	aliases {
-		serial0 = &uart_AO;   /* Console */
-		serial1 = &uart_AO_B; /* External UART (Wireless Module) */
-		ethernet0 = &ethmac;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* 1024MB RAM */
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-
-	reserved-memory {
-		linux,cma {
-			size = <0x0 0x400000>;
-		};
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vcc_5v: regulator-vcc_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vddao_3v3: regulator-vddao_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_5v>;
-		regulator-always-on;
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vddio_boot: regulator-vddio_boot {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_BOOT";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	usb_pwr: regulator-usb_pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "USB_PWR";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc_5v>;
-		regulator-always-on;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
-		clocks = <&wifi32k>;
-		clock-names = "ext_clock";
-	};
-
-	wifi32k: wifi32k {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-			thermal-sensors = <&scpi_sensors 0>;
-			trips {
-				cpu_passive: cpu-passive {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "passive";
-				};
-
-				cpu_hot: cpu-hot {
-					temperature = <80000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "hot";
-				};
-
-				cpu_critical: cpu-critical {
-					temperature = <100000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "critical";
-				};
-			};
-		};
-
-		cpu_cooling_maps: cooling-maps {
-			map0 {
-				trip = <&cpu_passive>;
-				cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-			};
-
-			map1 {
-				trip = <&cpu_hot>;
-				cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-			};
-		};
-	};
-	onewire {
-		compatible = "w1-gpio";
-		gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
-		#gpio-cells = <1>;
-	};
-};
-
-&efuse {
-	sn: sn@32 {
-		reg = <0x32 0x20>;
-	};
-
-	eth_mac: eth_mac@0 {
-		reg = <0x0 0x6>;
-	};
-
-	bt_mac: bt_mac@6 {
-		reg = <0x6 0x6>;
-	};
-
-	wifi_mac: wifi_mac@c {
-		reg = <0xc 0x6>;
-	};
-
-	bid: bid@12 {
-		reg = <0x12 0x20>;
-	};
-};
-
-&ethmac {
-	status = "okay";
-	pinctrl-0 = <&eth_rmii_x_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&eth_phy0>;
-	phy-mode = "rmii";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
-		eth_phy0: ethernet-phy@0 {
-			/* compatible = "ethernet-phy-id0243.0c54";*/
-			max-speed = <100>;
-			reg = <0>;
-
-			reset-assert-us = <10000>;
-			reset-deassert-us = <10000>;
-			reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-/* Internal I2C bus (on CPU module) */
-&i2c1 {
-	status = "okay";
-	pinctrl-0 = <&i2c1_z_pins>;
-	pinctrl-names = "default";
-
-	/* RTC */
-	pcf8563: pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-		status = "okay";
-	};
-};
-
-/* Peripheral I2C bus (on motherboard) */
-&i2c_AO {
-	status = "okay";
-	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
-	pinctrl-names = "default";
-};
-
-&pwm_ab {
-	status = "okay";
-	pinctrl-0 = <&pwm_a_x20_pins>;
-	pinctrl-names = "default";
-};
-
-/* wifi module */
-&sd_emmc_b {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-1 = <&sdio_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	sd-uhs-sdr104;
-	max-frequency = <200000000>;
-	non-removable;
-	disable-wp;
-
-	mmc-pwrseq = <&sdio_pwrseq>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-/* emmc storage */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	max-frequency = <200000000>;
-	non-removable;
-	disable-wp;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-/* UART Bluetooth */
-&uart_B {
-	status = "okay";
-	pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-/* UART Console */
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-/* UART Wireless module */
-&uart_AO_B {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_b_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	status = "okay";
-	phy-supply = <&usb_pwr>;
-};
-
-&spicc1 {
-	status = "okay";
-	pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
-	pinctrl-names = "default";
-};
-
-&gpio {
-	gpio-line-names =
-		"", "", "", "", "", // 0 - 4
-		"", "", "", "", "", // 5 - 9
-		"UserButton", "", "", "", "", // 10 - 14
-		"", "", "", "", "", // 15 - 19
-		"", "", "", "", "", // 20 - 24
-		"", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
-		"Output1", "", "", "", "", // 30 - 34
-		"", "ZigBeeBOOT", "", "", "", // 35 - 39
-		"", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
-		"Input2", "Input1", "", "", "", // 45 - 49
-		"", "", "", "", "", // 50 - 54
-		"", "", "", "", "", // 55 - 59
-		"", "", "", "", "", // 60 - 64
-		"", "", "", "", "", // 65 - 69
-		"", "", "", "", "", // 70 - 74
-		"", "", "", "", "", // 75 - 79
-		"", "", "", "", "", // 80 - 84
-		"", ""; // 85-86
-};
-
-&cpu0 {
-	#cooling-cells = <2>;
-};
-
-&cpu1 {
-	#cooling-cells = <2>;
-};
-
-&cpu2 {
-	#cooling-cells = <2>;
-};
-
-&cpu3 {
-	#cooling-cells = <2>;
-};
diff --git a/arch/arm/dts/meson-axg-s400.dts b/arch/arm/dts/meson-axg-s400.dts
deleted file mode 100644
index 359589d1df..0000000000
--- a/arch/arm/dts/meson-axg-s400.dts
+++ /dev/null
@@ -1,602 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "meson-axg.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
-	model = "Amlogic Meson AXG S400 Development Board";
-
-	adc_keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-
-		button-next {
-			label = "Next";
-			linux,code = <KEY_NEXT>;
-			press-threshold-microvolt = <1116000>; /* 62% */
-		};
-
-		button-prev {
-			label = "Previous";
-			linux,code = <KEY_PREVIOUS>;
-			press-threshold-microvolt = <900000>; /* 50% */
-		};
-
-		button-wifi {
-			label = "Wifi";
-			linux,code = <KEY_WLAN>;
-			press-threshold-microvolt = <684000>; /* 38% */
-		};
-
-		button-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			press-threshold-microvolt = <468000>; /* 26% */
-		};
-
-		button-down {
-			label = "Volume Down";
-			linux,code = <KEY_VOLUMEDOWN>;
-			press-threshold-microvolt = <252000>; /* 14% */
-		};
-
-		button-voice {
-			label = "Voice";
-			linux,code = <KEY_VOICECOMMAND>;
-			press-threshold-microvolt = <0>; /* 0% */
-		};
-	};
-
-	aliases {
-		serial0 = &uart_AO;
-		serial1 = &uart_A;
-	};
-
-	linein: audio-codec-0 {
-		#sound-dai-cells = <0>;
-		compatible = "everest,es7241";
-		VDDA-supply = <&vcc_3v3>;
-		VDDP-supply = <&vcc_3v3>;
-		VDDD-supply = <&vcc_3v3>;
-		status = "okay";
-		sound-name-prefix = "Linein";
-	};
-
-	lineout: audio-codec-1 {
-		#sound-dai-cells = <0>;
-		compatible = "everest,es7154";
-		VDD-supply = <&vcc_3v3>;
-		PVDD-supply = <&vcc_5v>;
-		status = "okay";
-		sound-name-prefix = "Lineout";
-	};
-
-	spdif_dit: audio-codec-2 {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dit";
-		status = "okay";
-		sound-name-prefix = "DIT";
-	};
-
-	dmics: audio-codec-3 {
-		#sound-dai-cells = <0>;
-		compatible = "dmic-codec";
-		num-channels = <7>;
-		wakeup-delay-ms = <50>;
-		status = "okay";
-		sound-name-prefix = "MIC";
-	};
-
-	spdif_dir: audio-codec-4 {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dir";
-		status = "okay";
-		sound-name-prefix = "DIR";
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-
-	main_12v: regulator-main_12v {
-		compatible = "regulator-fixed";
-		regulator-name = "12V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vcc_5v: regulator-vcc_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&main_12v>;
-
-		gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vddao_3v3: regulator-vddao_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&main_12v>;
-		regulator-always-on;
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vddio_boot: regulator-vddio_boot {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_BOOT";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	usb_pwr: regulator-usb_pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "USB_PWR";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc_5v>;
-
-		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
-		clocks = <&wifi32k>;
-		clock-names = "ext_clock";
-	};
-
-	speaker-leds {
-		compatible = "gpio-leds";
-
-		aled1 {
-			label = "speaker:aled1";
-			gpios = <&gpio_speaker 7 0>;
-		};
-
-		aled2 {
-			label = "speaker:aled2";
-			gpios = <&gpio_speaker 6 0>;
-		};
-
-		aled3 {
-			label = "speaker:aled3";
-			gpios = <&gpio_speaker 5 0>;
-		};
-
-		aled4 {
-			label = "speaker:aled4";
-			gpios = <&gpio_speaker 4 0>;
-		};
-
-		aled5 {
-			label = "speaker:aled5";
-			gpios = <&gpio_speaker 3 0>;
-		};
-
-		aled6 {
-			label = "speaker:aled6";
-			gpios = <&gpio_speaker 2 0>;
-		};
-	};
-
-	sound {
-		compatible = "amlogic,axg-sound-card";
-		model = "AXG-S400";
-		audio-aux-devs = <&tdmin_a>, <&tdmin_b>,  <&tdmin_c>,
-				 <&tdmin_lb>, <&tdmout_c>;
-		audio-widgets = "Line", "Lineout",
-				"Line", "Linein",
-				"Speaker", "Speaker1 Left",
-				"Speaker", "Speaker1 Right";
-		audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
-				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
-				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
-				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
-				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
-				"SPDIFOUT IN 2", "FRDDR_C OUT 3",
-				"TDM_C Playback", "TDMOUT_C OUT",
-				"TDMIN_A IN 2", "TDM_C Capture",
-				"TDMIN_A IN 5", "TDM_C Loopback",
-				"TDMIN_B IN 2", "TDM_C Capture",
-				"TDMIN_B IN 5", "TDM_C Loopback",
-				"TDMIN_C IN 2", "TDM_C Capture",
-				"TDMIN_C IN 5", "TDM_C Loopback",
-				"TDMIN_LB IN 2", "TDM_C Loopback",
-				"TDMIN_LB IN 5", "TDM_C Capture",
-				"TODDR_A IN 0", "TDMIN_A OUT",
-				"TODDR_B IN 0", "TDMIN_A OUT",
-				"TODDR_C IN 0", "TDMIN_A OUT",
-				"TODDR_A IN 1", "TDMIN_B OUT",
-				"TODDR_B IN 1", "TDMIN_B OUT",
-				"TODDR_C IN 1", "TDMIN_B OUT",
-				"TODDR_A IN 2", "TDMIN_C OUT",
-				"TODDR_B IN 2", "TDMIN_C OUT",
-				"TODDR_C IN 2", "TDMIN_C OUT",
-				"TODDR_A IN 3", "SPDIFIN Capture",
-				"TODDR_B IN 3", "SPDIFIN Capture",
-				"TODDR_C IN 3", "SPDIFIN Capture",
-				"TODDR_A IN 4", "PDM Capture",
-				"TODDR_B IN 4", "PDM Capture",
-				"TODDR_C IN 4", "PDM Capture",
-				"TODDR_A IN 6", "TDMIN_LB OUT",
-				"TODDR_B IN 6", "TDMIN_LB OUT",
-				"TODDR_C IN 6", "TDMIN_LB OUT",
-				"Lineout", "Lineout AOUTL",
-				"Lineout", "Lineout AOUTR",
-				"Speaker1 Left", "SPK1 OUT_A",
-				"Speaker1 Left", "SPK1 OUT_B",
-				"Speaker1 Right", "SPK1 OUT_C",
-				"Speaker1 Right", "SPK1 OUT_D",
-				"Linein AINL", "Linein",
-				"Linein AINR", "Linein";
-		assigned-clocks = <&clkc CLKID_HIFI_PLL>,
-				  <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <589824000>,
-				       <270950400>,
-				       <393216000>;
-		status = "okay";
-
-		dai-link-0 {
-			sound-dai = <&frddr_a>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&frddr_b>;
-		};
-
-		dai-link-2 {
-			sound-dai = <&frddr_c>;
-		};
-
-		dai-link-3 {
-			sound-dai = <&toddr_a>;
-		};
-
-		dai-link-4 {
-			sound-dai = <&toddr_b>;
-		};
-
-		dai-link-5 {
-			sound-dai = <&toddr_c>;
-		};
-
-		dai-link-6 {
-			sound-dai = <&tdmif_c>;
-			dai-format = "i2s";
-			dai-tdm-slot-tx-mask-2 = <1 1>;
-			dai-tdm-slot-rx-mask-1 = <1 1>;
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&lineout>;
-			};
-
-			codec-1 {
-				sound-dai = <&speaker_amp1>;
-			};
-
-			codec-2 {
-				sound-dai = <&linein>;
-			};
-
-		};
-
-		dai-link-7 {
-			sound-dai = <&spdifout>;
-
-			codec {
-				sound-dai = <&spdif_dit>;
-			};
-		};
-
-		dai-link-8 {
-			sound-dai = <&spdifin>;
-
-			codec {
-				sound-dai = <&spdif_dir>;
-			};
-		};
-
-		dai-link-9 {
-			sound-dai = <&pdm>;
-
-			codec {
-				sound-dai = <&dmics>;
-			};
-		};
-	};
-
-	wifi32k: wifi32k {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
-	};
-};
-
-&ethmac {
-	status = "okay";
-	pinctrl-0 = <&eth_rgmii_y_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&eth_phy0>;
-	phy-mode = "rgmii";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		eth_phy0: ethernet-phy@0 {
-			/* Realtek RTL8211F (0x001cc916) */
-			reg = <0>;
-			interrupt-parent = <&gpio_intc>;
-			interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
-			eee-broken-1000t;
-		};
-	};
-};
-
-&frddr_a {
-	status = "okay";
-};
-
-&frddr_b {
-	status = "okay";
-};
-
-&frddr_c {
-	status = "okay";
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-0 = <&i2c1_z_pins>;
-	pinctrl-names = "default";
-
-	speaker_amp1: audio-codec@1b {
-		compatible = "ti,tas5707";
-		reg = <0x1b>;
-		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		AVDD-supply = <&vcc_3v3>;
-		DVDD-supply = <&vcc_3v3>;
-		PVDD_A-supply = <&main_12v>;
-		PVDD_B-supply = <&main_12v>;
-		PVDD_C-supply = <&main_12v>;
-		PVDD_D-supply = <&main_12v>;
-		sound-name-prefix = "SPK1";
-	};
-};
-
-&i2c_AO {
-	status = "okay";
-	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
-	pinctrl-names = "default";
-
-	gpio_speaker: gpio-controller@1f {
-		compatible = "nxp,pca9557";
-		reg = <0x1f>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		vcc-supply = <&vddao_3v3>;
-	};
-};
-
-&pdm {
-	pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>,
-		    <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&pcieA {
-	reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pcieB {
-	reset-gpios = <&gpio GPIOZ_10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&pwm_ab {
-	status = "okay";
-	pinctrl-0 = <&pwm_a_x20_pins>;
-	pinctrl-names = "default";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao18>;
-};
-
-/* wifi module */
-&sd_emmc_b {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-1 = <&sdio_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	sd-uhs-sdr104;
-	max-frequency = <200000000>;
-	non-removable;
-	disable-wp;
-
-	mmc-pwrseq = <&sdio_pwrseq>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-/* emmc storage */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	max-frequency = <200000000>;
-	non-removable;
-	disable-wp;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-&spdifin {
-	pinctrl-0 = <&spdif_in_a19_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&spdifout {
-	pinctrl-0 = <&spdif_out_a20_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tdmif_a {
-	pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>,
-		    <&tdma_din0_pins>, <&tdma_dout0_x15_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tdmif_b {
-	pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>,
-		    <&tdmb_din3_pins>, <&mclk_b_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tdmif_c {
-	pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>,
-		    <&tdmc_din1_pins>, <&tdmc_dout2_pins>,
-		    <&mclk_c_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tdmin_a {
-	status = "okay";
-};
-
-&tdmin_b {
-	status = "okay";
-};
-
-&tdmin_c {
-	status = "okay";
-};
-
-&tdmin_lb {
-	status = "okay";
-};
-
-&tdmout_c {
-	status = "okay";
-};
-
-&toddr_a {
-	status = "okay";
-};
-
-&toddr_b {
-	status = "okay";
-};
-
-&toddr_c {
-	status = "okay";
-};
-
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	status = "okay";
-	dr_mode = "otg";
-	vbus-supply = <&usb_pwr>;
-};
diff --git a/arch/arm/dts/meson-axg.dtsi b/arch/arm/dts/meson-axg.dtsi
deleted file mode 100644
index 3f5254eeb4..0000000000
--- a/arch/arm/dts/meson-axg.dtsi
+++ /dev/null
@@ -1,1957 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
- */
-
-#include <dt-bindings/clock/axg-aoclkc.h>
-#include <dt-bindings/clock/axg-audio-clkc.h>
-#include <dt-bindings/clock/axg-clkc.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/gpio/meson-axg-gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
-#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
-#include <dt-bindings/power/meson-axg-power.h>
-
-/ {
-	compatible = "amlogic,meson-axg";
-
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	tdmif_a: audio-controller-0 {
-		compatible = "amlogic,axg-tdm-iface";
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "TDM_A";
-		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
-		status = "disabled";
-	};
-
-	tdmif_b: audio-controller-1 {
-		compatible = "amlogic,axg-tdm-iface";
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "TDM_B";
-		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
-		status = "disabled";
-	};
-
-	tdmif_c: audio-controller-2 {
-		compatible = "amlogic,axg-tdm-iface";
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "TDM_C";
-		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
-		status = "disabled";
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	cpus {
-		#address-cells = <0x2>;
-		#size-cells = <0x0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 0>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 0>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 0>;
-		};
-
-		l2: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	sm: secure-monitor {
-		compatible = "amlogic,meson-gxbb-sm";
-	};
-
-	efuse: efuse {
-		compatible = "amlogic,meson-gxbb-efuse";
-		clocks = <&clkc CLKID_EFUSE>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		read-only;
-		secure-monitor = <&sm>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/* 16 MiB reserved for Hardware ROM Firmware */
-		hwrom_reserved: hwrom@0 {
-			reg = <0x0 0x0 0x0 0x1000000>;
-			no-map;
-		};
-
-		/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
-		secmon_reserved: secmon@5000000 {
-			reg = <0x0 0x05000000 0x0 0x300000>;
-			no-map;
-		};
-	};
-
-	scpi {
-		compatible = "arm,scpi-pre-1.0";
-		mboxes = <&mailbox 1 &mailbox 2>;
-		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
-
-		scpi_clocks: clocks {
-			compatible = "arm,scpi-clocks";
-
-			scpi_dvfs: clock-controller {
-				compatible = "arm,scpi-dvfs-clocks";
-				#clock-cells = <1>;
-				clock-indices = <0>;
-				clock-output-names = "vcpu";
-			};
-		};
-
-		scpi_sensors: sensors {
-			compatible = "amlogic,meson-gxbb-scpi-sensors";
-			#thermal-sensor-cells = <1>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		pcieA: pcie@f9800000 {
-			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
-			reg = <0x0 0xf9800000 0x0 0x400000>,
-			      <0x0 0xff646000 0x0 0x2000>,
-			      <0x0 0xf9f00000 0x0 0x100000>;
-			reg-names = "elbi", "cfg", "config";
-			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
-			bus-range = <0x0 0xff>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x82000000 0 0xf9c00000 0x0 0xf9c00000 0 0x00300000>;
-
-			clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_A>, <&clkc CLKID_PCIE_CML_EN0>;
-			clock-names = "general", "pclk", "port";
-			resets = <&reset RESET_PCIE_A>, <&reset RESET_PCIE_APB>;
-			reset-names = "port", "apb";
-			num-lanes = <1>;
-			phys = <&pcie_phy>;
-			phy-names = "pcie";
-			status = "disabled";
-		};
-
-		pcieB: pcie@fa000000 {
-			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
-			reg = <0x0 0xfa000000 0x0 0x400000>,
-			      <0x0 0xff648000 0x0 0x2000>,
-			      <0x0 0xfa400000 0x0 0x100000>;
-			reg-names = "elbi", "cfg", "config";
-			interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
-			bus-range = <0x0 0xff>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x82000000 0 0xfa500000 0x0 0xfa500000 0 0x00300000>;
-
-			clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_B>, <&clkc CLKID_PCIE_CML_EN1>;
-			clock-names = "general", "pclk", "port";
-			resets = <&reset RESET_PCIE_B>, <&reset RESET_PCIE_APB>;
-			reset-names = "port", "apb";
-			num-lanes = <1>;
-			phys = <&pcie_phy>;
-			phy-names = "pcie";
-			status = "disabled";
-		};
-
-		usb: usb@ffe09080 {
-			compatible = "amlogic,meson-axg-usb-ctrl";
-			reg = <0x0 0xffe09080 0x0 0x20>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
-			clock-names = "usb_ctrl", "ddr";
-			resets = <&reset RESET_USB_OTG>;
-
-			dr_mode = "otg";
-
-			phys = <&usb2_phy1>;
-			phy-names = "usb2-phy1";
-
-			dwc2: usb@ff400000 {
-				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
-				reg = <0x0 0xff400000 0x0 0x40000>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clkc CLKID_USB1>;
-				clock-names = "otg";
-				phys = <&usb2_phy1>;
-				dr_mode = "peripheral";
-				g-rx-fifo-size = <192>;
-				g-np-tx-fifo-size = <128>;
-				g-tx-fifo-size = <128 128 16 16 16>;
-			};
-
-			dwc3: usb@ff500000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0xff500000 0x0 0x100000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				dr_mode = "host";
-				maximum-speed = "high-speed";
-				snps,dis_u2_susphy_quirk;
-			};
-		};
-
-		ethmac: ethernet@ff3f0000 {
-			compatible = "amlogic,meson-axg-dwmac",
-				     "snps,dwmac-3.70a",
-				     "snps,dwmac";
-			reg = <0x0 0xff3f0000 0x0 0x10000>,
-			      <0x0 0xff634540 0x0 0x8>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			clocks = <&clkc CLKID_ETH>,
-				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>,
-				 <&clkc CLKID_FCLK_DIV2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1",
-				      "timing-adjustment";
-			rx-fifo-depth = <4096>;
-			tx-fifo-depth = <2048>;
-			power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>;
-			status = "disabled";
-		};
-
-		pcie_phy: phy@ff644000 {
-			compatible = "amlogic,axg-pcie-phy";
-			reg = <0x0 0xff644000 0x0 0x1c>;
-			resets = <&reset RESET_PCIE_PHY>;
-			phys = <&mipi_pcie_analog_dphy>;
-			phy-names = "analog";
-			#phy-cells = <0>;
-		};
-
-		pdm: audio-controller@ff632000 {
-			compatible = "amlogic,axg-pdm";
-			reg = <0x0 0xff632000 0x0 0x34>;
-			#sound-dai-cells = <0>;
-			sound-name-prefix = "PDM";
-			clocks = <&clkc_audio AUD_CLKID_PDM>,
-				 <&clkc_audio AUD_CLKID_PDM_DCLK>,
-				 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
-			clock-names = "pclk", "dclk", "sysclk";
-			status = "disabled";
-		};
-
-		periphs: bus@ff634000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xff634000 0x0 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
-
-			hwrng: rng@18 {
-				compatible = "amlogic,meson-rng";
-				reg = <0x0 0x18 0x0 0x4>;
-				clocks = <&clkc CLKID_RNG0>;
-				clock-names = "core";
-			};
-
-			pinctrl_periphs: pinctrl@480 {
-				compatible = "amlogic,meson-axg-periphs-pinctrl";
-				#address-cells = <2>;
-				#size-cells = <2>;
-				ranges;
-
-				gpio: bank@480 {
-					reg = <0x0 0x00480 0x0 0x40>,
-					      <0x0 0x004e8 0x0 0x14>,
-					      <0x0 0x00520 0x0 0x14>,
-					      <0x0 0x00430 0x0 0x3c>;
-					reg-names = "mux", "pull", "pull-enable", "gpio";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pinctrl_periphs 0 0 86>;
-				};
-
-				i2c0_pins: i2c0 {
-					mux {
-						groups = "i2c0_sck",
-							 "i2c0_sda";
-						function = "i2c0";
-						bias-disable;
-					};
-				};
-
-				i2c1_x_pins: i2c1_x {
-					mux {
-						groups = "i2c1_sck_x",
-							 "i2c1_sda_x";
-						function = "i2c1";
-						bias-disable;
-					};
-				};
-
-				i2c1_z_pins: i2c1_z {
-					mux {
-						groups = "i2c1_sck_z",
-							 "i2c1_sda_z";
-						function = "i2c1";
-						bias-disable;
-					};
-				};
-
-				i2c2_a_pins: i2c2_a {
-					mux {
-						groups = "i2c2_sck_a",
-							 "i2c2_sda_a";
-						function = "i2c2";
-						bias-disable;
-					};
-				};
-
-				i2c2_x_pins: i2c2_x {
-					mux {
-						groups = "i2c2_sck_x",
-							 "i2c2_sda_x";
-						function = "i2c2";
-						bias-disable;
-					};
-				};
-
-				i2c3_a6_pins: i2c3_a6 {
-					mux {
-						groups = "i2c3_sda_a6",
-							 "i2c3_sck_a7";
-						function = "i2c3";
-						bias-disable;
-					};
-				};
-
-				i2c3_a12_pins: i2c3_a12 {
-					mux {
-						groups = "i2c3_sda_a12",
-							 "i2c3_sck_a13";
-						function = "i2c3";
-						bias-disable;
-					};
-				};
-
-				i2c3_a19_pins: i2c3_a19 {
-					mux {
-						groups = "i2c3_sda_a19",
-							 "i2c3_sck_a20";
-						function = "i2c3";
-						bias-disable;
-					};
-				};
-
-				emmc_pins: emmc {
-					mux-0 {
-						groups = "emmc_nand_d0",
-							 "emmc_nand_d1",
-							 "emmc_nand_d2",
-							 "emmc_nand_d3",
-							 "emmc_nand_d4",
-							 "emmc_nand_d5",
-							 "emmc_nand_d6",
-							 "emmc_nand_d7",
-							 "emmc_cmd";
-						function = "emmc";
-						bias-pull-up;
-					};
-
-					mux-1 {
-						groups = "emmc_clk";
-						function = "emmc";
-						bias-disable;
-					};
-				};
-
-				emmc_ds_pins: emmc_ds {
-					mux {
-						groups = "emmc_ds";
-						function = "emmc";
-						bias-pull-down;
-					};
-				};
-
-				emmc_clk_gate_pins: emmc_clk_gate {
-					mux {
-						groups = "BOOT_8";
-						function = "gpio_periphs";
-						bias-pull-down;
-					};
-				};
-
-				eth_rgmii_x_pins: eth-x-rgmii {
-					mux {
-						groups = "eth_mdio_x",
-							 "eth_mdc_x",
-							 "eth_rgmii_rx_clk_x",
-							 "eth_rx_dv_x",
-							 "eth_rxd0_x",
-							 "eth_rxd1_x",
-							 "eth_rxd2_rgmii",
-							 "eth_rxd3_rgmii",
-							 "eth_rgmii_tx_clk",
-							 "eth_txen_x",
-							 "eth_txd0_x",
-							 "eth_txd1_x",
-							 "eth_txd2_rgmii",
-							 "eth_txd3_rgmii";
-						function = "eth";
-						bias-disable;
-					};
-				};
-
-				eth_rgmii_y_pins: eth-y-rgmii {
-					mux {
-						groups = "eth_mdio_y",
-							 "eth_mdc_y",
-							 "eth_rgmii_rx_clk_y",
-							 "eth_rx_dv_y",
-							 "eth_rxd0_y",
-							 "eth_rxd1_y",
-							 "eth_rxd2_rgmii",
-							 "eth_rxd3_rgmii",
-							 "eth_rgmii_tx_clk",
-							 "eth_txen_y",
-							 "eth_txd0_y",
-							 "eth_txd1_y",
-							 "eth_txd2_rgmii",
-							 "eth_txd3_rgmii";
-						function = "eth";
-						bias-disable;
-					};
-				};
-
-				eth_rmii_x_pins: eth-x-rmii {
-					mux {
-						groups = "eth_mdio_x",
-							 "eth_mdc_x",
-							 "eth_rgmii_rx_clk_x",
-							 "eth_rx_dv_x",
-							 "eth_rxd0_x",
-							 "eth_rxd1_x",
-							 "eth_txen_x",
-							 "eth_txd0_x",
-							 "eth_txd1_x";
-						function = "eth";
-						bias-disable;
-					};
-				};
-
-				eth_rmii_y_pins: eth-y-rmii {
-					mux {
-						groups = "eth_mdio_y",
-							 "eth_mdc_y",
-							 "eth_rgmii_rx_clk_y",
-							 "eth_rx_dv_y",
-							 "eth_rxd0_y",
-							 "eth_rxd1_y",
-							 "eth_txen_y",
-							 "eth_txd0_y",
-							 "eth_txd1_y";
-						function = "eth";
-						bias-disable;
-					};
-				};
-
-				mclk_b_pins: mclk_b {
-					mux {
-						groups = "mclk_b";
-						function = "mclk_b";
-						bias-disable;
-					};
-				};
-
-				mclk_c_pins: mclk_c {
-					mux {
-						groups = "mclk_c";
-						function = "mclk_c";
-						bias-disable;
-					};
-				};
-
-				pdm_dclk_a14_pins: pdm_dclk_a14 {
-					mux {
-						groups = "pdm_dclk_a14";
-						function = "pdm";
-						bias-disable;
-					};
-				};
-
-				pdm_dclk_a19_pins: pdm_dclk_a19 {
-					mux {
-						groups = "pdm_dclk_a19";
-						function = "pdm";
-						bias-disable;
-					};
-				};
-
-				pdm_din0_pins: pdm_din0 {
-					mux {
-						groups = "pdm_din0";
-						function = "pdm";
-						bias-disable;
-					};
-				};
-
-				pdm_din1_pins: pdm_din1 {
-					mux {
-						groups = "pdm_din1";
-						function = "pdm";
-						bias-disable;
-					};
-				};
-
-				pdm_din2_pins: pdm_din2 {
-					mux {
-						groups = "pdm_din2";
-						function = "pdm";
-						bias-disable;
-					};
-				};
-
-				pdm_din3_pins: pdm_din3 {
-					mux {
-						groups = "pdm_din3";
-						function = "pdm";
-						bias-disable;
-					};
-				};
-
-				pwm_a_a_pins: pwm_a_a {
-					mux {
-						groups = "pwm_a_a";
-						function = "pwm_a";
-						bias-disable;
-					};
-				};
-
-				pwm_a_x18_pins: pwm_a_x18 {
-					mux {
-						groups = "pwm_a_x18";
-						function = "pwm_a";
-						bias-disable;
-					};
-				};
-
-				pwm_a_x20_pins: pwm_a_x20 {
-					mux {
-						groups = "pwm_a_x20";
-						function = "pwm_a";
-						bias-disable;
-					};
-				};
-
-				pwm_a_z_pins: pwm_a_z {
-					mux {
-						groups = "pwm_a_z";
-						function = "pwm_a";
-						bias-disable;
-					};
-				};
-
-				pwm_b_a_pins: pwm_b_a {
-					mux {
-						groups = "pwm_b_a";
-						function = "pwm_b";
-						bias-disable;
-					};
-				};
-
-				pwm_b_x_pins: pwm_b_x {
-					mux {
-						groups = "pwm_b_x";
-						function = "pwm_b";
-						bias-disable;
-					};
-				};
-
-				pwm_b_z_pins: pwm_b_z {
-					mux {
-						groups = "pwm_b_z";
-						function = "pwm_b";
-						bias-disable;
-					};
-				};
-
-				pwm_c_a_pins: pwm_c_a {
-					mux {
-						groups = "pwm_c_a";
-						function = "pwm_c";
-						bias-disable;
-					};
-				};
-
-				pwm_c_x10_pins: pwm_c_x10 {
-					mux {
-						groups = "pwm_c_x10";
-						function = "pwm_c";
-						bias-disable;
-					};
-				};
-
-				pwm_c_x17_pins: pwm_c_x17 {
-					mux {
-						groups = "pwm_c_x17";
-						function = "pwm_c";
-						bias-disable;
-					};
-				};
-
-				pwm_d_x11_pins: pwm_d_x11 {
-					mux {
-						groups = "pwm_d_x11";
-						function = "pwm_d";
-						bias-disable;
-					};
-				};
-
-				pwm_d_x16_pins: pwm_d_x16 {
-					mux {
-						groups = "pwm_d_x16";
-						function = "pwm_d";
-						bias-disable;
-					};
-				};
-
-				sdio_pins: sdio {
-					mux-0 {
-						groups = "sdio_d0",
-							 "sdio_d1",
-							 "sdio_d2",
-							 "sdio_d3",
-							 "sdio_cmd";
-						function = "sdio";
-						bias-pull-up;
-					};
-
-					mux-1 {
-						groups = "sdio_clk";
-						function = "sdio";
-						bias-disable;
-					};
-				};
-
-				sdio_clk_gate_pins: sdio_clk_gate {
-					mux {
-						groups = "GPIOX_4";
-						function = "gpio_periphs";
-						bias-pull-down;
-					};
-				};
-
-				spdif_in_z_pins: spdif_in_z {
-					mux {
-						groups = "spdif_in_z";
-						function = "spdif_in";
-						bias-disable;
-					};
-				};
-
-				spdif_in_a1_pins: spdif_in_a1 {
-					mux {
-						groups = "spdif_in_a1";
-						function = "spdif_in";
-						bias-disable;
-					};
-				};
-
-				spdif_in_a7_pins: spdif_in_a7 {
-					mux {
-						groups = "spdif_in_a7";
-						function = "spdif_in";
-						bias-disable;
-					};
-				};
-
-				spdif_in_a19_pins: spdif_in_a19 {
-					mux {
-						groups = "spdif_in_a19";
-						function = "spdif_in";
-						bias-disable;
-					};
-				};
-
-				spdif_in_a20_pins: spdif_in_a20 {
-					mux {
-						groups = "spdif_in_a20";
-						function = "spdif_in";
-						bias-disable;
-					};
-				};
-
-				spdif_out_a1_pins: spdif_out_a1 {
-					mux {
-						groups = "spdif_out_a1";
-						function = "spdif_out";
-						bias-disable;
-					};
-				};
-
-				spdif_out_a11_pins: spdif_out_a11 {
-					mux {
-						groups = "spdif_out_a11";
-						function = "spdif_out";
-						bias-disable;
-					};
-				};
-
-				spdif_out_a19_pins: spdif_out_a19 {
-					mux {
-						groups = "spdif_out_a19";
-						function = "spdif_out";
-						bias-disable;
-					};
-				};
-
-				spdif_out_a20_pins: spdif_out_a20 {
-					mux {
-						groups = "spdif_out_a20";
-						function = "spdif_out";
-						bias-disable;
-					};
-				};
-
-				spdif_out_z_pins: spdif_out_z {
-					mux {
-						groups = "spdif_out_z";
-						function = "spdif_out";
-						bias-disable;
-					};
-				};
-
-				spi0_pins: spi0 {
-					mux {
-						groups = "spi0_miso",
-							 "spi0_mosi",
-							 "spi0_clk";
-						function = "spi0";
-						bias-disable;
-					};
-				};
-
-				spi0_ss0_pins: spi0_ss0 {
-					mux {
-						groups = "spi0_ss0";
-						function = "spi0";
-						bias-disable;
-					};
-				};
-
-				spi0_ss1_pins: spi0_ss1 {
-					mux {
-						groups = "spi0_ss1";
-						function = "spi0";
-						bias-disable;
-					};
-				};
-
-				spi0_ss2_pins: spi0_ss2 {
-					mux {
-						groups = "spi0_ss2";
-						function = "spi0";
-						bias-disable;
-					};
-				};
-
-				spi1_a_pins: spi1_a {
-					mux {
-						groups = "spi1_miso_a",
-							 "spi1_mosi_a",
-							 "spi1_clk_a";
-						function = "spi1";
-						bias-disable;
-					};
-				};
-
-				spi1_ss0_a_pins: spi1_ss0_a {
-					mux {
-						groups = "spi1_ss0_a";
-						function = "spi1";
-						bias-disable;
-					};
-				};
-
-				spi1_ss1_pins: spi1_ss1 {
-					mux {
-						groups = "spi1_ss1";
-						function = "spi1";
-						bias-disable;
-					};
-				};
-
-				spi1_x_pins: spi1_x {
-					mux {
-						groups = "spi1_miso_x",
-							 "spi1_mosi_x",
-							 "spi1_clk_x";
-						function = "spi1";
-						bias-disable;
-					};
-				};
-
-				spi1_ss0_x_pins: spi1_ss0_x {
-					mux {
-						groups = "spi1_ss0_x";
-						function = "spi1";
-						bias-disable;
-					};
-				};
-
-				tdma_din0_pins: tdma_din0 {
-					mux {
-						groups = "tdma_din0";
-						function = "tdma";
-						bias-disable;
-					};
-				};
-
-				tdma_dout0_x14_pins: tdma_dout0_x14 {
-					mux {
-						groups = "tdma_dout0_x14";
-						function = "tdma";
-						bias-disable;
-					};
-				};
-
-				tdma_dout0_x15_pins: tdma_dout0_x15 {
-					mux {
-						groups = "tdma_dout0_x15";
-						function = "tdma";
-						bias-disable;
-					};
-				};
-
-				tdma_dout1_pins: tdma_dout1 {
-					mux {
-						groups = "tdma_dout1";
-						function = "tdma";
-						bias-disable;
-					};
-				};
-
-				tdma_din1_pins: tdma_din1 {
-					mux {
-						groups = "tdma_din1";
-						function = "tdma";
-						bias-disable;
-					};
-				};
-
-				tdma_fs_pins: tdma_fs {
-					mux {
-						groups = "tdma_fs";
-						function = "tdma";
-						bias-disable;
-					};
-				};
-
-				tdma_fs_slv_pins: tdma_fs_slv {
-					mux {
-						groups = "tdma_fs_slv";
-						function = "tdma";
-						bias-disable;
-					};
-				};
-
-				tdma_sclk_pins: tdma_sclk {
-					mux {
-						groups = "tdma_sclk";
-						function = "tdma";
-						bias-disable;
-					};
-				};
-
-				tdma_sclk_slv_pins: tdma_sclk_slv {
-					mux {
-						groups = "tdma_sclk_slv";
-						function = "tdma";
-						bias-disable;
-					};
-				};
-
-				tdmb_din0_pins: tdmb_din0 {
-					mux {
-						groups = "tdmb_din0";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmb_din1_pins: tdmb_din1 {
-					mux {
-						groups = "tdmb_din1";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmb_din2_pins: tdmb_din2 {
-					mux {
-						groups = "tdmb_din2";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmb_din3_pins: tdmb_din3 {
-					mux {
-						groups = "tdmb_din3";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmb_dout0_pins: tdmb_dout0 {
-					mux {
-						groups = "tdmb_dout0";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmb_dout1_pins: tdmb_dout1 {
-					mux {
-						groups = "tdmb_dout1";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmb_dout2_pins: tdmb_dout2 {
-					mux {
-						groups = "tdmb_dout2";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmb_dout3_pins: tdmb_dout3 {
-					mux {
-						groups = "tdmb_dout3";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmb_fs_pins: tdmb_fs {
-					mux {
-						groups = "tdmb_fs";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmb_fs_slv_pins: tdmb_fs_slv {
-					mux {
-						groups = "tdmb_fs_slv";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmb_sclk_pins: tdmb_sclk {
-					mux {
-						groups = "tdmb_sclk";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmb_sclk_slv_pins: tdmb_sclk_slv {
-					mux {
-						groups = "tdmb_sclk_slv";
-						function = "tdmb";
-						bias-disable;
-					};
-				};
-
-				tdmc_fs_pins: tdmc_fs {
-					mux {
-						groups = "tdmc_fs";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				tdmc_fs_slv_pins: tdmc_fs_slv {
-					mux {
-						groups = "tdmc_fs_slv";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				tdmc_sclk_pins: tdmc_sclk {
-					mux {
-						groups = "tdmc_sclk";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				tdmc_sclk_slv_pins: tdmc_sclk_slv {
-					mux {
-						groups = "tdmc_sclk_slv";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				tdmc_din0_pins: tdmc_din0 {
-					mux {
-						groups = "tdmc_din0";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				tdmc_din1_pins: tdmc_din1 {
-					mux {
-						groups = "tdmc_din1";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				tdmc_din2_pins: tdmc_din2 {
-					mux {
-						groups = "tdmc_din2";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				tdmc_din3_pins: tdmc_din3 {
-					mux {
-						groups = "tdmc_din3";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				tdmc_dout0_pins: tdmc_dout0 {
-					mux {
-						groups = "tdmc_dout0";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				tdmc_dout1_pins: tdmc_dout1 {
-					mux {
-						groups = "tdmc_dout1";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				tdmc_dout2_pins: tdmc_dout2 {
-					mux {
-						groups = "tdmc_dout2";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				tdmc_dout3_pins: tdmc_dout3 {
-					mux {
-						groups = "tdmc_dout3";
-						function = "tdmc";
-						bias-disable;
-					};
-				};
-
-				uart_a_pins: uart_a {
-					mux {
-						groups = "uart_tx_a",
-							 "uart_rx_a";
-						function = "uart_a";
-						bias-disable;
-					};
-				};
-
-				uart_a_cts_rts_pins: uart_a_cts_rts {
-					mux {
-						groups = "uart_cts_a",
-							 "uart_rts_a";
-						function = "uart_a";
-						bias-disable;
-					};
-				};
-
-				uart_b_x_pins: uart_b_x {
-					mux {
-						groups = "uart_tx_b_x",
-							 "uart_rx_b_x";
-						function = "uart_b";
-						bias-disable;
-					};
-				};
-
-				uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
-					mux {
-						groups = "uart_cts_b_x",
-							 "uart_rts_b_x";
-						function = "uart_b";
-						bias-disable;
-					};
-				};
-
-				uart_b_z_pins: uart_b_z {
-					mux {
-						groups = "uart_tx_b_z",
-							 "uart_rx_b_z";
-						function = "uart_b";
-						bias-disable;
-					};
-				};
-
-				uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
-					mux {
-						groups = "uart_cts_b_z",
-							 "uart_rts_b_z";
-						function = "uart_b";
-						bias-disable;
-					};
-				};
-
-				uart_ao_b_z_pins: uart_ao_b_z {
-					mux {
-						groups = "uart_ao_tx_b_z",
-							 "uart_ao_rx_b_z";
-						function = "uart_ao_b_z";
-						bias-disable;
-					};
-				};
-
-				uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
-					mux {
-						groups = "uart_ao_cts_b_z",
-							 "uart_ao_rts_b_z";
-						function = "uart_ao_b_z";
-						bias-disable;
-					};
-				};
-			};
-		};
-
-		hiubus: bus@ff63c000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xff63c000 0x0 0x1c00>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
-
-			sysctrl: system-controller@0 {
-				compatible = "amlogic,meson-axg-hhi-sysctrl",
-					     "simple-mfd", "syscon";
-				reg = <0 0 0 0x400>;
-
-				clkc: clock-controller {
-					compatible = "amlogic,axg-clkc";
-					#clock-cells = <1>;
-					clocks = <&xtal>;
-					clock-names = "xtal";
-				};
-
-				pwrc: power-controller {
-					compatible = "amlogic,meson-axg-pwrc";
-					#power-domain-cells = <1>;
-					amlogic,ao-sysctrl = <&sysctrl_AO>;
-					resets = <&reset RESET_VIU>,
-						 <&reset RESET_VENC>,
-						 <&reset RESET_VCBUS>,
-						 <&reset RESET_VENCL>,
-						 <&reset RESET_VID_LOCK>;
-					reset-names = "viu", "venc", "vcbus",
-						      "vencl", "vid_lock";
-					clocks = <&clkc CLKID_VPU>,
-						 <&clkc CLKID_VAPB>;
-					clock-names = "vpu", "vapb";
-					/*
-					 * VPU clocking is provided by two identical clock paths
-					 * VPU_0 and VPU_1 muxed to a single clock by a glitch
-					 * free mux to safely change frequency while running.
-					 * Same for VAPB but with a final gate after the glitch free mux.
-					 */
-					assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
-							  <&clkc CLKID_VPU_0>,
-							  <&clkc CLKID_VPU>, /* Glitch free mux */
-							  <&clkc CLKID_VAPB_0_SEL>,
-							  <&clkc CLKID_VAPB_0>,
-							  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
-					assigned-clock-parents = <&clkc CLKID_FCLK_DIV4>,
-								 <0>, /* Do Nothing */
-								 <&clkc CLKID_VPU_0>,
-								 <&clkc CLKID_FCLK_DIV4>,
-								 <0>, /* Do Nothing */
-								 <&clkc CLKID_VAPB_0>;
-					assigned-clock-rates = <0>, /* Do Nothing */
-							       <250000000>,
-							       <0>, /* Do Nothing */
-							       <0>, /* Do Nothing */
-							       <250000000>,
-							       <0>; /* Do Nothing */
-				};
-
-				mipi_pcie_analog_dphy: phy {
-					compatible = "amlogic,axg-mipi-pcie-analog-phy";
-					#phy-cells = <0>;
-					status = "disabled";
-				};
-			};
-		};
-
-		mailbox: mailbox@ff63c404 {
-			compatible = "amlogic,meson-gxbb-mhu";
-			reg = <0 0xff63c404 0 0x4c>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
-			#mbox-cells = <1>;
-		};
-
-		mipi_dphy: phy@ff640000 {
-			compatible = "amlogic,axg-mipi-dphy";
-			reg = <0x0 0xff640000 0x0 0x100>;
-			clocks = <&clkc CLKID_MIPI_DSI_PHY>;
-			clock-names = "pclk";
-			resets = <&reset RESET_MIPI_PHY>;
-			reset-names = "phy";
-			phys = <&mipi_pcie_analog_dphy>;
-			phy-names = "analog";
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		audio: bus@ff642000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xff642000 0x0 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
-
-			clkc_audio: clock-controller@0 {
-				compatible = "amlogic,axg-audio-clkc";
-				reg = <0x0 0x0 0x0 0xb4>;
-				#clock-cells = <1>;
-
-				clocks = <&clkc CLKID_AUDIO>,
-					 <&clkc CLKID_MPLL0>,
-					 <&clkc CLKID_MPLL1>,
-					 <&clkc CLKID_MPLL2>,
-					 <&clkc CLKID_MPLL3>,
-					 <&clkc CLKID_HIFI_PLL>,
-					 <&clkc CLKID_FCLK_DIV3>,
-					 <&clkc CLKID_FCLK_DIV4>,
-					 <&clkc CLKID_GP0_PLL>;
-				clock-names = "pclk",
-					      "mst_in0",
-					      "mst_in1",
-					      "mst_in2",
-					      "mst_in3",
-					      "mst_in4",
-					      "mst_in5",
-					      "mst_in6",
-					      "mst_in7";
-
-				resets = <&reset RESET_AUDIO>;
-			};
-
-			toddr_a: audio-controller@100 {
-				compatible = "amlogic,axg-toddr";
-				reg = <0x0 0x100 0x0 0x2c>;
-				#sound-dai-cells = <0>;
-				sound-name-prefix = "TODDR_A";
-				interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
-				resets = <&arb AXG_ARB_TODDR_A>;
-				amlogic,fifo-depth = <512>;
-				status = "disabled";
-			};
-
-			toddr_b: audio-controller@140 {
-				compatible = "amlogic,axg-toddr";
-				reg = <0x0 0x140 0x0 0x2c>;
-				#sound-dai-cells = <0>;
-				sound-name-prefix = "TODDR_B";
-				interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
-				resets = <&arb AXG_ARB_TODDR_B>;
-				amlogic,fifo-depth = <256>;
-				status = "disabled";
-			};
-
-			toddr_c: audio-controller@180 {
-				compatible = "amlogic,axg-toddr";
-				reg = <0x0 0x180 0x0 0x2c>;
-				#sound-dai-cells = <0>;
-				sound-name-prefix = "TODDR_C";
-				interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
-				resets = <&arb AXG_ARB_TODDR_C>;
-				amlogic,fifo-depth = <256>;
-				status = "disabled";
-			};
-
-			frddr_a: audio-controller@1c0 {
-				compatible = "amlogic,axg-frddr";
-				reg = <0x0 0x1c0 0x0 0x2c>;
-				#sound-dai-cells = <0>;
-				sound-name-prefix = "FRDDR_A";
-				interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
-				resets = <&arb AXG_ARB_FRDDR_A>;
-				amlogic,fifo-depth = <512>;
-				status = "disabled";
-			};
-
-			frddr_b: audio-controller@200 {
-				compatible = "amlogic,axg-frddr";
-				reg = <0x0 0x200 0x0 0x2c>;
-				#sound-dai-cells = <0>;
-				sound-name-prefix = "FRDDR_B";
-				interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
-				resets = <&arb AXG_ARB_FRDDR_B>;
-				amlogic,fifo-depth = <256>;
-				status = "disabled";
-			};
-
-			frddr_c: audio-controller@240 {
-				compatible = "amlogic,axg-frddr";
-				reg = <0x0 0x240 0x0 0x2c>;
-				#sound-dai-cells = <0>;
-				sound-name-prefix = "FRDDR_C";
-				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
-				resets = <&arb AXG_ARB_FRDDR_C>;
-				amlogic,fifo-depth = <256>;
-				status = "disabled";
-			};
-
-			arb: reset-controller@280 {
-				compatible = "amlogic,meson-axg-audio-arb";
-				reg = <0x0 0x280 0x0 0x4>;
-				#reset-cells = <1>;
-				clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
-			};
-
-			tdmin_a: audio-controller@300 {
-				compatible = "amlogic,axg-tdmin";
-				reg = <0x0 0x300 0x0 0x40>;
-				sound-name-prefix = "TDMIN_A";
-				clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
-					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
-					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
-					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
-					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
-				clock-names = "pclk", "sclk", "sclk_sel",
-					      "lrclk", "lrclk_sel";
-				status = "disabled";
-			};
-
-			tdmin_b: audio-controller@340 {
-				compatible = "amlogic,axg-tdmin";
-				reg = <0x0 0x340 0x0 0x40>;
-				sound-name-prefix = "TDMIN_B";
-				clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
-					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
-					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
-					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
-					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
-				clock-names = "pclk", "sclk", "sclk_sel",
-					      "lrclk", "lrclk_sel";
-				status = "disabled";
-			};
-
-			tdmin_c: audio-controller@380 {
-				compatible = "amlogic,axg-tdmin";
-				reg = <0x0 0x380 0x0 0x40>;
-				sound-name-prefix = "TDMIN_C";
-				clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
-					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
-					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
-					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
-					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
-				clock-names = "pclk", "sclk", "sclk_sel",
-					      "lrclk", "lrclk_sel";
-				status = "disabled";
-			};
-
-			tdmin_lb: audio-controller@3c0 {
-				compatible = "amlogic,axg-tdmin";
-				reg = <0x0 0x3c0 0x0 0x40>;
-				sound-name-prefix = "TDMIN_LB";
-				clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
-					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
-					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
-					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
-					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
-				clock-names = "pclk", "sclk", "sclk_sel",
-					      "lrclk", "lrclk_sel";
-				status = "disabled";
-			};
-
-			spdifin: audio-controller@400 {
-				compatible = "amlogic,axg-spdifin";
-				reg = <0x0 0x400 0x0 0x30>;
-				#sound-dai-cells = <0>;
-				sound-name-prefix = "SPDIFIN";
-				interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
-					 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
-				clock-names = "pclk", "refclk";
-				status = "disabled";
-			};
-
-			spdifout: audio-controller@480 {
-				compatible = "amlogic,axg-spdifout";
-				reg = <0x0 0x480 0x0 0x50>;
-				#sound-dai-cells = <0>;
-				sound-name-prefix = "SPDIFOUT";
-				clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
-					 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
-				clock-names = "pclk", "mclk";
-				status = "disabled";
-			};
-
-			tdmout_a: audio-controller@500 {
-				compatible = "amlogic,axg-tdmout";
-				reg = <0x0 0x500 0x0 0x40>;
-				sound-name-prefix = "TDMOUT_A";
-				clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
-				clock-names = "pclk", "sclk", "sclk_sel",
-					      "lrclk", "lrclk_sel";
-				status = "disabled";
-			};
-
-			tdmout_b: audio-controller@540 {
-				compatible = "amlogic,axg-tdmout";
-				reg = <0x0 0x540 0x0 0x40>;
-				sound-name-prefix = "TDMOUT_B";
-				clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
-				clock-names = "pclk", "sclk", "sclk_sel",
-					      "lrclk", "lrclk_sel";
-				status = "disabled";
-			};
-
-			tdmout_c: audio-controller@580 {
-				compatible = "amlogic,axg-tdmout";
-				reg = <0x0 0x580 0x0 0x40>;
-				sound-name-prefix = "TDMOUT_C";
-				clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
-					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
-				clock-names = "pclk", "sclk", "sclk_sel",
-					      "lrclk", "lrclk_sel";
-				status = "disabled";
-			};
-		};
-
-		aobus: bus@ff800000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xff800000 0x0 0x100000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
-
-			sysctrl_AO: sys-ctrl@0 {
-				compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
-				reg =  <0x0 0x0 0x0 0x100>;
-
-				clkc_AO: clock-controller {
-					compatible = "amlogic,meson-axg-aoclkc";
-					#clock-cells = <1>;
-					#reset-cells = <1>;
-					clocks = <&xtal>, <&clkc CLKID_CLK81>;
-					clock-names = "xtal", "mpeg-clk";
-				};
-			};
-
-			pinctrl_aobus: pinctrl@14 {
-				compatible = "amlogic,meson-axg-aobus-pinctrl";
-				#address-cells = <2>;
-				#size-cells = <2>;
-				ranges;
-
-				gpio_ao: bank@14 {
-					reg = <0x0 0x00014 0x0 0x8>,
-					      <0x0 0x0002c 0x0 0x4>,
-					      <0x0 0x00024 0x0 0x8>;
-					reg-names = "mux", "pull", "gpio";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pinctrl_aobus 0 0 15>;
-				};
-
-				i2c_ao_sck_4_pins: i2c_ao_sck_4 {
-					mux {
-						groups = "i2c_ao_sck_4";
-						function = "i2c_ao";
-						bias-disable;
-					};
-				};
-
-				i2c_ao_sck_8_pins: i2c_ao_sck_8 {
-					mux {
-						groups = "i2c_ao_sck_8";
-						function = "i2c_ao";
-						bias-disable;
-					};
-				};
-
-				i2c_ao_sck_10_pins: i2c_ao_sck_10 {
-					mux {
-						groups = "i2c_ao_sck_10";
-						function = "i2c_ao";
-						bias-disable;
-					};
-				};
-
-				i2c_ao_sda_5_pins: i2c_ao_sda_5 {
-					mux {
-						groups = "i2c_ao_sda_5";
-						function = "i2c_ao";
-						bias-disable;
-					};
-				};
-
-				i2c_ao_sda_9_pins: i2c_ao_sda_9 {
-					mux {
-						groups = "i2c_ao_sda_9";
-						function = "i2c_ao";
-						bias-disable;
-					};
-				};
-
-				i2c_ao_sda_11_pins: i2c_ao_sda_11 {
-					mux {
-						groups = "i2c_ao_sda_11";
-						function = "i2c_ao";
-						bias-disable;
-					};
-				};
-
-				remote_input_ao_pins: remote_input_ao {
-					mux {
-						groups = "remote_input_ao";
-						function = "remote_input_ao";
-						bias-disable;
-					};
-				};
-
-				uart_ao_a_pins: uart_ao_a {
-					mux {
-						groups = "uart_ao_tx_a",
-							 "uart_ao_rx_a";
-						function = "uart_ao_a";
-						bias-disable;
-					};
-				};
-
-				uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
-					mux {
-						groups = "uart_ao_cts_a",
-							 "uart_ao_rts_a";
-						function = "uart_ao_a";
-						bias-disable;
-					};
-				};
-
-				uart_ao_b_pins: uart_ao_b {
-					mux {
-						groups = "uart_ao_tx_b",
-							 "uart_ao_rx_b";
-						function = "uart_ao_b";
-						bias-disable;
-					};
-				};
-
-				uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
-					mux {
-						groups = "uart_ao_cts_b",
-							 "uart_ao_rts_b";
-						function = "uart_ao_b";
-						bias-disable;
-					};
-				};
-			};
-
-			sec_AO: ao-secure@140 {
-				compatible = "amlogic,meson-gx-ao-secure", "syscon";
-				reg = <0x0 0x140 0x0 0x140>;
-				amlogic,has-chip-id;
-			};
-
-			pwm_AO_cd: pwm@2000 {
-				compatible = "amlogic,meson-axg-ao-pwm";
-				reg = <0x0 0x02000  0x0 0x20>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			uart_AO: serial@3000 {
-				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x3000 0x0 0x18>;
-				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
-				clock-names = "xtal", "pclk", "baud";
-				status = "disabled";
-			};
-
-			uart_AO_B: serial@4000 {
-				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x4000 0x0 0x18>;
-				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
-				clock-names = "xtal", "pclk", "baud";
-				status = "disabled";
-			};
-
-			i2c_AO: i2c@5000 {
-				compatible = "amlogic,meson-axg-i2c";
-				reg = <0x0 0x05000 0x0 0x20>;
-				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_AO_I2C>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			pwm_AO_ab: pwm@7000 {
-				compatible = "amlogic,meson-axg-ao-pwm";
-				reg = <0x0 0x07000 0x0 0x20>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			ir: ir@8000 {
-				compatible = "amlogic,meson-gxbb-ir";
-				reg = <0x0 0x8000 0x0 0x20>;
-				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			saradc: adc@9000 {
-				compatible = "amlogic,meson-axg-saradc",
-					"amlogic,meson-saradc";
-				reg = <0x0 0x9000 0x0 0x38>;
-				#io-channel-cells = <1>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>,
-					 <&clkc_AO CLKID_AO_SAR_ADC>,
-					 <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
-					 <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
-				clock-names = "clkin", "core", "adc_clk", "adc_sel";
-				status = "disabled";
-			};
-		};
-
-		ge2d: ge2d@ff940000 {
-			compatible = "amlogic,axg-ge2d";
-			reg = <0x0 0xff940000 0x0 0x10000>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkc CLKID_VAPB>;
-			resets = <&reset RESET_GE2D>;
-		};
-
-		gic: interrupt-controller@ffc01000 {
-			compatible = "arm,gic-400";
-			reg = <0x0 0xffc01000 0 0x1000>,
-			      <0x0 0xffc02000 0 0x2000>,
-			      <0x0 0xffc04000 0 0x2000>,
-			      <0x0 0xffc06000 0 0x2000>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9
-				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-		};
-
-		cbus: bus@ffd00000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xffd00000 0x0 0x25000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
-
-			reset: reset-controller@1004 {
-				compatible = "amlogic,meson-axg-reset";
-				reg = <0x0 0x01004 0x0 0x9c>;
-				#reset-cells = <1>;
-			};
-
-			gpio_intc: interrupt-controller@f080 {
-				compatible = "amlogic,meson-axg-gpio-intc",
-					     "amlogic,meson-gpio-intc";
-				reg = <0x0 0xf080 0x0 0x10>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
-			};
-
-			watchdog@f0d0 {
-				compatible = "amlogic,meson-gxbb-wdt";
-				reg = <0x0 0xf0d0 0x0 0x10>;
-				clocks = <&xtal>;
-			};
-
-			pwm_ab: pwm@1b000 {
-				compatible = "amlogic,meson-axg-ee-pwm";
-				reg = <0x0 0x1b000 0x0 0x20>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm_cd: pwm@1a000 {
-				compatible = "amlogic,meson-axg-ee-pwm";
-				reg = <0x0 0x1a000 0x0 0x20>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			spicc0: spi@13000 {
-				compatible = "amlogic,meson-axg-spicc";
-				reg = <0x0 0x13000 0x0 0x3c>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clkc CLKID_SPICC0>;
-				clock-names = "core";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spicc1: spi@15000 {
-				compatible = "amlogic,meson-axg-spicc";
-				reg = <0x0 0x15000 0x0 0x3c>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clkc CLKID_SPICC1>;
-				clock-names = "core";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			clk_msr: clock-measure@18000 {
-				compatible = "amlogic,meson-axg-clk-measure";
-				reg = <0x0 0x18000 0x0 0x10>;
-			};
-
-			i2c3: i2c@1c000 {
-				compatible = "amlogic,meson-axg-i2c";
-				reg = <0x0 0x1c000 0x0 0x20>;
-				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_I2C>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@1d000 {
-				compatible = "amlogic,meson-axg-i2c";
-				reg = <0x0 0x1d000 0x0 0x20>;
-				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_I2C>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@1e000 {
-				compatible = "amlogic,meson-axg-i2c";
-				reg = <0x0 0x1e000 0x0 0x20>;
-				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_I2C>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@1f000 {
-				compatible = "amlogic,meson-axg-i2c";
-				reg = <0x0 0x1f000 0x0 0x20>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_I2C>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			uart_B: serial@23000 {
-				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x23000 0x0 0x18>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-				clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
-				clock-names = "xtal", "pclk", "baud";
-			};
-
-			uart_A: serial@24000 {
-				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x24000 0x0 0x18>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-				clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
-				clock-names = "xtal", "pclk", "baud";
-				fifo-size = <128>;
-			};
-		};
-
-		apb: bus@ffe00000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xffe00000 0x0 0x200000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
-
-			sd_emmc_b: sd@5000 {
-				compatible = "amlogic,meson-axg-mmc";
-				reg = <0x0 0x5000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-				clocks = <&clkc CLKID_SD_EMMC_B>,
-					<&clkc CLKID_SD_EMMC_B_CLK0>,
-					<&clkc CLKID_FCLK_DIV2>;
-				clock-names = "core", "clkin0", "clkin1";
-				resets = <&reset RESET_SD_EMMC_B>;
-			};
-
-			sd_emmc_c: mmc@7000 {
-				compatible = "amlogic,meson-axg-mmc";
-				reg = <0x0 0x7000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-				clocks = <&clkc CLKID_SD_EMMC_C>,
-					<&clkc CLKID_SD_EMMC_C_CLK0>,
-					<&clkc CLKID_FCLK_DIV2>;
-				clock-names = "core", "clkin0", "clkin1";
-				resets = <&reset RESET_SD_EMMC_C>;
-			};
-
-			usb2_phy1: phy@9020 {
-				compatible = "amlogic,meson-gxl-usb2-phy";
-				#phy-cells = <0>;
-				reg = <0x0 0x9020 0x0 0x20>;
-				clocks = <&clkc CLKID_USB>;
-				clock-names = "phy";
-				resets = <&reset RESET_USB_OTG>;
-				reset-names = "phy";
-			};
-		};
-
-		sram: sram@fffc0000 {
-			compatible = "mmio-sram";
-			reg = <0x0 0xfffc0000 0x0 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x0 0xfffc0000 0x20000>;
-
-			cpu_scp_lpri: scp-sram@13000 {
-				compatible = "amlogic,meson-axg-scp-shmem";
-				reg = <0x13000 0x400>;
-			};
-
-			cpu_scp_hpri: scp-sram@13400 {
-				compatible = "amlogic,meson-axg-scp-shmem";
-				reg = <0x13400 0x400>;
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
-};
diff --git a/arch/arm/dts/meson-gx-libretech-pc.dtsi b/arch/arm/dts/meson-gx-libretech-pc.dtsi
deleted file mode 100644
index 4e84ab87cc..0000000000
--- a/arch/arm/dts/meson-gx-libretech-pc.dtsi
+++ /dev/null
@@ -1,447 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 BayLibre SAS.
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-
-		button-update {
-			label = "update";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <1300000>;
-		};
-	};
-
-	aliases {
-		serial0 = &uart_AO;
-		ethernet0 = &ethmac;
-		spi0 = &spifc;
-	};
-
-	dio2133: analog-amplifier {
-		compatible = "simple-audio-amplifier";
-		sound-name-prefix = "AU2";
-		VCC-supply = <&vcc5v>;
-		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cvbs-connector {
-		compatible = "composite-video-connector";
-		status = "disabled";
-
-		port {
-			cvbs_connector_in: endpoint {
-				remote-endpoint = <&cvbs_vdac_out>;
-			};
-		};
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		power-button {
-			label = "power";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-	ao_5v: regulator-ao_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "AO_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_in>;
-		regulator-always-on;
-	};
-
-	dc_in: regulator-dc_in {
-		compatible = "regulator-fixed";
-		regulator-name = "DC_IN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-green {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_DISK_ACTIVITY;
-			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-		};
-
-		led-blue {
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			panic-indicator;
-		};
-	};
-
-	vcc_card: regulator-vcc_card {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_CARD";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vddio_ao3v3>;
-
-		gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vcc5v: regulator-vcc5v {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&ao_5v>;
-
-		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&ao_5v>;
-		regulator-always-on;
-	};
-
-	vddio_ao3v3: regulator-vddio_ao3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&ao_5v>;
-		regulator-always-on;
-	};
-
-	vddio_boot: regulator-vddio_boot {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_BOOT";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddio_ao3v3>;
-		regulator-always-on;
-	};
-
-	vddio_card: regulator-vddio-card {
-		compatible = "regulator-gpio";
-		regulator-name = "VDDIO_CARD";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>;
-		gpios-states = <0>;
-
-		states = <3300000 0>,
-			 <1800000 1>;
-
-		regulator-settling-time-up-us = <200>;
-		regulator-settling-time-down-us = <50000>;
-	};
-
-	sound {
-		compatible = "amlogic,gx-sound-card";
-		model = "LIBRETECH-PC";
-		audio-aux-devs = <&dio2133>;
-		audio-widgets = "Speaker", "7J4-14 LEFT",
-				"Speaker", "7J4-11 RIGHT";
-		audio-routing = "AU2 INL", "ACODEC LOLN",
-				"AU2 INR", "ACODEC LORN",
-				"7J4-14 LEFT", "AU2 OUTL",
-				"7J4-11 RIGHT", "AU2 OUTR";
-		assigned-clocks = <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>,
-				  <&clkc CLKID_MPLL2>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <294912000>,
-				       <270950400>,
-				       <393216000>;
-		status = "okay";
-
-		dai-link-0 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
-			dai-format = "i2s";
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
-			};
-
-			codec-1 {
-				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
-			};
-		};
-
-		dai-link-2 {
-			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&hdmi_tx>;
-			};
-		};
-
-		dai-link-3 {
-			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&acodec>;
-			};
-		};
-	};
-};
-
-&acodec {
-	AVDD-supply = <&vddio_ao18>;
-	status = "okay";
-};
-
-&aiu {
-	status = "okay";
-};
-
-&cec_AO {
-	pinctrl-0 = <&ao_cec_pins>;
-	pinctrl-names = "default";
-	hdmi-phandle = <&hdmi_tx>;
-	status = "okay";
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&ethmac {
-	pinctrl-0 = <&eth_pins>, <&eth_phy_irq_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&external_phy>;
-	amlogic,tx-delay-ns = <2>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&external_mdio {
-	external_phy: ethernet-phy@0 {
-		reg = <0>;
-		max-speed = <1000>;
-		reset-assert-us = <10000>;
-		reset-deassert-us = <30000>;
-		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpio_intc>;
-		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&pinctrl_periphs {
-	/*
-	 * Make sure the reset pin of the usb HUB is driven high to take
-	 * it out of reset.
-	 */
-	usb1_rst_pins: usb1_rst_irq {
-		mux {
-			groups = "GPIODV_3";
-			function = "gpio_periphs";
-			bias-disable;
-			output-high;
-		};
-	};
-
-	/* Make sure the phy irq pin is properly configured as input */
-	eth_phy_irq_pins: eth_phy_irq {
-		mux {
-			groups = "GPIOZ_15";
-			function = "gpio_periphs";
-			bias-disable;
-			output-disable;
-		};
-	};
-};
-
-&hdmi_tx {
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
-	pinctrl-names = "default";
-	hdmi-supply = <&vcc5v>;
-	status = "okay";
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&ir {
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c_C {
-	pinctrl-0 = <&i2c_c_dv18_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	rtc: rtc@51 {
-		reg = <0x51>;
-		compatible = "nxp,pcf8563";
-		#clock-cells = <0>;
-		clock-output-names = "rtc_clkout";
-	};
-};
-
-&pwm_AO_ab {
-	pinctrl-0 = <&pwm_ao_a_3_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-	status = "okay";
-};
-
-&pwm_ab {
-	pinctrl-0 = <&pwm_b_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-	status = "okay";
-};
-
-&pwm_ef {
-	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vddio_ao18>;
-	status = "okay";
-};
-
-/* SD card */
-&sd_emmc_b {
-	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-1 = <&sdcard_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-ddr50;
-	max-frequency = <200000000>;
-	disable-wp;
-
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
-	vmmc-supply = <&vcc_card>;
-	vqmmc-supply = <&vddio_card>;
-
-	status = "okay";
-};
-
-/* eMMC */
-&sd_emmc_c {
-	pinctrl-0 = <&emmc_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	max-frequency = <200000000>;
-	disable-wp;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vddio_ao3v3>;
-	vqmmc-supply = <&vddio_boot>;
-
-	status = "okay";
-};
-
-&spifc {
-	pinctrl-0 = <&nor_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	gd25lq128: flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <12000000>;
-	};
-};
-
-&uart_AO {
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb2_phy0 {
-	pinctrl-0 = <&usb1_rst_pins>;
-	pinctrl-names = "default";
-	phy-supply = <&vcc5v>;
-};
-
-&usb2_phy1 {
-	phy-supply = <&vcc5v>;
-};
diff --git a/arch/arm/dts/meson-gx-mali450.dtsi b/arch/arm/dts/meson-gx-mali450.dtsi
deleted file mode 100644
index f9771b51c8..0000000000
--- a/arch/arm/dts/meson-gx-mali450.dtsi
+++ /dev/null
@@ -1,61 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 BayLibre SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/ {
-	gpu_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp-125000000 {
-			opp-hz = /bits/ 64 <125000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-285714285 {
-			opp-hz = /bits/ 64 <285714285>;
-			opp-microvolt = <950000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-666666666 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <950000>;
-		};
-		opp-744000000 {
-			opp-hz = /bits/ 64 <744000000>;
-			opp-microvolt = <950000>;
-		};
-	};
-};
-
-&apb {
-	mali: gpu@c0000 {
-		compatible = "arm,mali-450";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "gp", "gpmmu", "pp", "pmu",
-			"pp0", "ppmmu0", "pp1", "ppmmu1",
-			"pp2", "ppmmu2";
-		operating-points-v2 = <&gpu_opp_table>;
-	};
-};
diff --git a/arch/arm/dts/meson-gx-p23x-q20x.dtsi b/arch/arm/dts/meson-gx-p23x-q20x.dtsi
deleted file mode 100644
index dafc841f7c..0000000000
--- a/arch/arm/dts/meson-gx-p23x-q20x.dtsi
+++ /dev/null
@@ -1,324 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either
- * the pin-compatible S912 (GXM) or S905D (GXL) SoCs.
- */
-
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
-	aliases {
-		serial0 = &uart_AO;
-		ethernet0 = &ethmac;
-	};
-
-	dio2133: analog-amplifier {
-		compatible = "simple-audio-amplifier";
-		sound-name-prefix = "AU2";
-		VCC-supply = <&hdmi_5v>;
-		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
-	};
-
-	spdif_dit: audio-codec-0 {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dit";
-		status = "okay";
-		sound-name-prefix = "DIT";
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-	hdmi_5v: regulator-hdmi-5v {
-		compatible = "regulator-fixed";
-
-		regulator-name = "HDMI_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vddio_boot: regulator-vddio_boot {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_BOOT";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vddao_3v3: regulator-vddao_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	wifi32k: wifi32k {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
-		clocks = <&wifi32k>;
-		clock-names = "ext_clock";
-	};
-
-	cvbs-connector {
-		compatible = "composite-video-connector";
-
-		port {
-			cvbs_connector_in: endpoint {
-				remote-endpoint = <&cvbs_vdac_out>;
-			};
-		};
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "amlogic,gx-sound-card";
-		model = "P230-Q200";
-		audio-aux-devs = <&dio2133>;
-		audio-widgets = "Line", "Lineout";
-		audio-routing = "AU2 INL", "ACODEC LOLP",
-				"AU2 INR", "ACODEC LORP",
-				"AU2 INL", "ACODEC LOLN",
-				"AU2 INR", "ACODEC LORN",
-				"Lineout", "AU2 OUTL",
-				"Lineout", "AU2 OUTR";
-		assigned-clocks = <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>,
-				  <&clkc CLKID_MPLL2>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <294912000>,
-				       <270950400>,
-				       <393216000>;
-		status = "okay";
-
-		dai-link-0 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
-		};
-
-		dai-link-2 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
-			dai-format = "i2s";
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
-			};
-
-			codec-1 {
-				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
-			};
-		};
-
-		dai-link-3 {
-			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
-
-			codec-0 {
-				sound-dai = <&spdif_dit>;
-			};
-		};
-
-		dai-link-4 {
-			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&hdmi_tx>;
-			};
-		};
-
-		dai-link-5 {
-			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&acodec>;
-			};
-		};
-	};
-};
-
-&acodec {
-	AVDD-supply = <&vddio_ao18>;
-	status = "okay";
-};
-
-&aiu {
-	status = "okay";
-	pinctrl-0 = <&spdif_out_h_pins>;
-	pinctrl-names = "default";
-
-};
-
-&cec_AO {
-	status = "okay";
-	pinctrl-0 = <&ao_cec_pins>;
-	pinctrl-names = "default";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&ethmac {
-	status = "okay";
-};
-
-&hdmi_tx {
-	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
-	pinctrl-names = "default";
-	hdmi-supply = <&hdmi_5v>;
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-};
-
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao18>;
-};
-
-/* Wireless SDIO Module */
-&sd_emmc_a {
-	status = "okay";
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-1 = <&sdio_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-
-	non-removable;
-	disable-wp;
-
-	/* WiFi firmware requires power to be kept while in suspend */
-	keep-power-in-suspend;
-
-	mmc-pwrseq = <&sdio_pwrseq>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-/* SD card */
-&sd_emmc_b {
-	status = "okay";
-	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-1 = <&sdcard_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-	disable-wp;
-
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-/* eMMC */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	max-frequency = <200000000>;
-	non-removable;
-	disable-wp;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	status = "okay";
-	dr_mode = "otg";
-};
diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi
deleted file mode 100644
index 11f89bfecb..0000000000
--- a/arch/arm/dts/meson-gx.dtsi
+++ /dev/null
@@ -1,675 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Andreas Färber
- *
- * Copyright (c) 2016 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/meson-gxbb-power.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		mmc0 = &sd_emmc_b; /* SD card */
-		mmc1 = &sd_emmc_c; /* eMMC */
-		mmc2 = &sd_emmc_a; /* SDIO */
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/* 16 MiB reserved for Hardware ROM Firmware */
-		hwrom_reserved: hwrom@0 {
-			reg = <0x0 0x0 0x0 0x1000000>;
-			no-map;
-		};
-
-		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
-		secmon_reserved: secmon@10000000 {
-			reg = <0x0 0x10000000 0x0 0x200000>;
-			no-map;
-		};
-
-		/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
-		secmon_reserved_alt: secmon@5000000 {
-			reg = <0x0 0x05000000 0x0 0x300000>;
-			no-map;
-		};
-
-		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
-		secmon_reserved_bl32: secmon@5300000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-
-		linux,cma {
-			compatible = "shared-dma-pool";
-			reusable;
-			size = <0x0 0x10000000>;
-			alignment = <0x0 0x400000>;
-			linux,cma-default;
-		};
-	};
-
-	chosen {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		simplefb_cvbs: framebuffer-cvbs {
-			compatible = "amlogic,simple-framebuffer",
-				     "simple-framebuffer";
-			amlogic,pipeline = "vpu-cvbs";
-			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
-			status = "disabled";
-		};
-
-		simplefb_hdmi: framebuffer-hdmi {
-			compatible = "amlogic,simple-framebuffer",
-				     "simple-framebuffer";
-			amlogic,pipeline = "vpu-hdmi";
-			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
-			status = "disabled";
-		};
-	};
-
-	cpus {
-		#address-cells = <0x2>;
-		#size-cells = <0x0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 0>;
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 0>;
-			#cooling-cells = <2>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 0>;
-			#cooling-cells = <2>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 0>;
-			#cooling-cells = <2>;
-		};
-
-		l2: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	thermal-zones {
-		cpu-thermal {
-			polling-delay-passive = <250>; /* milliseconds */
-			polling-delay = <1000>; /* milliseconds */
-
-			thermal-sensors = <&scpi_sensors 0>;
-
-			trips {
-				cpu_passive: cpu-passive {
-					temperature = <80000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "passive";
-				};
-
-				cpu_hot: cpu-hot {
-					temperature = <90000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "hot";
-				};
-
-				cpu_critical: cpu-critical {
-					temperature = <110000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "critical";
-				};
-			};
-
-			cpu_cooling_maps: cooling-maps {
-				map0 {
-					trip = <&cpu_passive>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-
-				map1 {
-					trip = <&cpu_hot>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
-
-	firmware {
-		sm: secure-monitor {
-			compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
-		};
-	};
-
-	efuse: efuse {
-		compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		read-only;
-		secure-monitor = <&sm>;
-
-		sn: sn@14 {
-			reg = <0x14 0x10>;
-		};
-
-		eth_mac: eth-mac@34 {
-			reg = <0x34 0x10>;
-		};
-
-		bid: bid@46 {
-			reg = <0x46 0x30>;
-		};
-	};
-
-	scpi {
-		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
-		mboxes = <&mailbox 1 &mailbox 2>;
-		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
-
-		scpi_clocks: clocks {
-			compatible = "arm,scpi-clocks";
-
-			scpi_dvfs: clocks-0 {
-				compatible = "arm,scpi-dvfs-clocks";
-				#clock-cells = <1>;
-				clock-indices = <0>;
-				clock-output-names = "vcpu";
-			};
-		};
-
-		scpi_sensors: sensors {
-			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
-			#thermal-sensor-cells = <1>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		cbus: bus@c1100000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc1100000 0x0 0x100000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
-
-			gpio_intc: interrupt-controller@9880 {
-				compatible = "amlogic,meson-gpio-intc";
-				reg = <0x0 0x9880 0x0 0x10>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
-				status = "disabled";
-			};
-
-			reset: reset-controller@4404 {
-				compatible = "amlogic,meson-gxbb-reset";
-				reg = <0x0 0x04404 0x0 0x9c>;
-				#reset-cells = <1>;
-			};
-
-			aiu: audio-controller@5400 {
-				compatible = "amlogic,aiu";
-				#sound-dai-cells = <2>;
-				sound-name-prefix = "AIU";
-				reg = <0x0 0x5400 0x0 0x2ac>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
-					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
-				interrupt-names = "i2s", "spdif";
-				status = "disabled";
-			};
-
-			uart_A: serial@84c0 {
-				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x84c0 0x0 0x18>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-				fifo-size = <128>;
-			};
-
-			uart_B: serial@84dc {
-				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x84dc 0x0 0x18>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			i2c_A: i2c@8500 {
-				compatible = "amlogic,meson-gxbb-i2c";
-				reg = <0x0 0x08500 0x0 0x20>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			pwm_ab: pwm@8550 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
-				reg = <0x0 0x08550 0x0 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm_cd: pwm@8650 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
-				reg = <0x0 0x08650 0x0 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			saradc: adc@8680 {
-				compatible = "amlogic,meson-saradc";
-				reg = <0x0 0x8680 0x0 0x34>;
-				#io-channel-cells = <1>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			pwm_ef: pwm@86c0 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
-				reg = <0x0 0x086c0 0x0 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			uart_C: serial@8700 {
-				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x8700 0x0 0x18>;
-				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			clock-measure@8758 {
-				compatible = "amlogic,meson-gx-clk-measure";
-				reg = <0x0 0x8758 0x0 0x10>;
-			};
-
-			i2c_B: i2c@87c0 {
-				compatible = "amlogic,meson-gxbb-i2c";
-				reg = <0x0 0x087c0 0x0 0x20>;
-				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c_C: i2c@87e0 {
-				compatible = "amlogic,meson-gxbb-i2c";
-				reg = <0x0 0x087e0 0x0 0x20>;
-				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spicc: spi@8d80 {
-				compatible = "amlogic,meson-gx-spicc";
-				reg = <0x0 0x08d80 0x0 0x80>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spifc: spi@8c80 {
-				compatible = "amlogic,meson-gxbb-spifc";
-				reg = <0x0 0x08c80 0x0 0x80>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			watchdog@98d0 {
-				compatible = "amlogic,meson-gxbb-wdt";
-				reg = <0x0 0x098d0 0x0 0x10>;
-				clocks = <&xtal>;
-			};
-		};
-
-		gic: interrupt-controller@c4301000 {
-			compatible = "arm,gic-400";
-			reg = <0x0 0xc4301000 0 0x1000>,
-			      <0x0 0xc4302000 0 0x2000>,
-			      <0x0 0xc4304000 0 0x2000>,
-			      <0x0 0xc4306000 0 0x2000>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9
-				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-		};
-
-		sram: sram@c8000000 {
-			compatible = "mmio-sram";
-			reg = <0x0 0xc8000000 0x0 0x14000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x0 0xc8000000 0x14000>;
-
-			cpu_scp_lpri: scp-sram@0 {
-				compatible = "amlogic,meson-gxbb-scp-shmem";
-				reg = <0x13000 0x400>;
-			};
-
-			cpu_scp_hpri: scp-sram@200 {
-				compatible = "amlogic,meson-gxbb-scp-shmem";
-				reg = <0x13400 0x400>;
-			};
-		};
-
-		aobus: bus@c8100000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc8100000 0x0 0x100000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
-
-			sysctrl_AO: sys-ctrl@0 {
-				compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
-				reg = <0x0 0x0 0x0 0x100>;
-
-				clkc_AO: clock-controller {
-					compatible = "amlogic,meson-gx-aoclkc";
-					#clock-cells = <1>;
-					#reset-cells = <1>;
-				};
-			};
-
-			cec_AO: cec@100 {
-				compatible = "amlogic,meson-gx-ao-cec";
-				reg = <0x0 0x00100 0x0 0x14>;
-				interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			sec_AO: ao-secure@140 {
-				compatible = "amlogic,meson-gx-ao-secure", "syscon";
-				reg = <0x0 0x140 0x0 0x140>;
-				amlogic,has-chip-id;
-			};
-
-			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x004c0 0x0 0x18>;
-				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			uart_AO_B: serial@4e0 {
-				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x004e0 0x0 0x18>;
-				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			i2c_AO: i2c@500 {
-				compatible = "amlogic,meson-gxbb-i2c";
-				reg = <0x0 0x500 0x0 0x20>;
-				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			pwm_AO_ab: pwm@550 {
-				compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
-				reg = <0x0 0x00550 0x0 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			ir: ir@580 {
-				compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
-				reg = <0x0 0x00580 0x0 0x40>;
-				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-		};
-
-		vdec: video-codec@c8820000 {
-			compatible = "amlogic,gx-vdec";
-			reg = <0x0 0xc8820000 0x0 0x10000>,
-			      <0x0 0xc110a580 0x0 0xe4>;
-			reg-names = "dos", "esparser";
-
-			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "vdec", "esparser";
-
-			amlogic,ao-sysctrl = <&sysctrl_AO>;
-			amlogic,canvas = <&canvas>;
-		};
-
-		periphs: bus@c8834000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc8834000 0x0 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
-
-			hwrng: rng@0 {
-				compatible = "amlogic,meson-rng";
-				reg = <0x0 0x0 0x0 0x4>;
-			};
-		};
-
-		dmcbus: bus@c8838000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc8838000 0x0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
-
-			canvas: video-lut@48 {
-				compatible = "amlogic,canvas";
-				reg = <0x0 0x48 0x0 0x14>;
-			};
-		};
-
-		hiubus: bus@c883c000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc883c000 0x0 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
-
-			sysctrl: system-controller@0 {
-				compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
-				reg = <0 0 0 0x400>;
-
-				pwrc: power-controller {
-					compatible = "amlogic,meson-gxbb-pwrc";
-					#power-domain-cells = <1>;
-					amlogic,ao-sysctrl = <&sysctrl_AO>;
-				};
-			};
-
-			mailbox: mailbox@404 {
-				compatible = "amlogic,meson-gxbb-mhu";
-				reg = <0 0x404 0 0x4c>;
-				interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
-					     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
-					     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
-				#mbox-cells = <1>;
-			};
-		};
-
-		ethmac: ethernet@c9410000 {
-			compatible = "amlogic,meson-gxbb-dwmac",
-				     "snps,dwmac-3.70a",
-				     "snps,dwmac";
-			reg = <0x0 0xc9410000 0x0 0x10000>,
-			      <0x0 0xc8834540 0x0 0x4>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			rx-fifo-depth = <4096>;
-			tx-fifo-depth = <2048>;
-			power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
-			status = "disabled";
-		};
-
-		apb: apb@d0000000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xd0000000 0x0 0x200000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
-
-			sd_emmc_a: mmc@70000 {
-				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
-				reg = <0x0 0x70000 0x0 0x800>;
-				interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			sd_emmc_b: mmc@72000 {
-				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
-				reg = <0x0 0x72000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			sd_emmc_c: mmc@74000 {
-				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
-				reg = <0x0 0x74000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-		};
-
-		vpu: vpu@d0100000 {
-			compatible = "amlogic,meson-gx-vpu";
-			reg = <0x0 0xd0100000 0x0 0x100000>,
-			      <0x0 0xc883c000 0x0 0x1000>;
-			reg-names = "vpu", "hhi";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			amlogic,canvas = <&canvas>;
-
-			/* CVBS VDAC output port */
-			cvbs_vdac_port: port@0 {
-				reg = <0>;
-			};
-
-			/* HDMI-TX output port */
-			hdmi_tx_port: port@1 {
-				reg = <1>;
-
-				hdmi_tx_out: endpoint {
-					remote-endpoint = <&hdmi_tx_in>;
-				};
-			};
-		};
-
-		hdmi_tx: hdmi-tx@c883a000 {
-			compatible = "amlogic,meson-gx-dw-hdmi";
-			reg = <0x0 0xc883a000 0x0 0x1c>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#sound-dai-cells = <0>;
-			sound-name-prefix = "HDMITX";
-			status = "disabled";
-
-			/* VPU VENC Input */
-			hdmi_tx_venc_port: port@0 {
-				reg = <0>;
-
-				hdmi_tx_in: endpoint {
-					remote-endpoint = <&hdmi_tx_out>;
-				};
-			};
-
-			/* TMDS Output */
-			hdmi_tx_tmds_port: port@1 {
-				reg = <1>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/dts/meson-gxl-mali.dtsi b/arch/arm/dts/meson-gxl-mali.dtsi
deleted file mode 100644
index 478e755cc8..0000000000
--- a/arch/arm/dts/meson-gxl-mali.dtsi
+++ /dev/null
@@ -1,17 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 BayLibre SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include "meson-gx-mali450.dtsi"
-
-&mali {
-	compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
-
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-	clock-names = "bus", "core";
-
-	assigned-clocks = <&clkc CLKID_GP0_PLL>;
-	assigned-clock-rates = <744000000>;
-};
diff --git a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
deleted file mode 100644
index 213a0705eb..0000000000
--- a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
+++ /dev/null
@@ -1,319 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-#include "meson-gxl-s805x.dtsi"
-
-/ {
-	compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
-		     "amlogic,meson-gxl";
-	model = "Libre Computer AML-S805X-AC";
-
-	aliases {
-		serial0 = &uart_AO;
-		ethernet0 = &ethmac;
-		spi0 = &spifc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cvbs-connector {
-		/*
-		 * The pads are present but no connector is soldered on
-		 * 2J2, so keep this off by default.
-		 */
-		status = "disabled";
-		compatible = "composite-video-connector";
-
-		port {
-			cvbs_connector_in: endpoint {
-				remote-endpoint = <&cvbs_vdac_out>;
-			};
-		};
-	};
-
-	dc_5v: regulator-dc_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "DC_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x20000000>;
-	};
-
-	vcck: regulator-vcck {
-		compatible = "regulator-fixed";
-		regulator-name = "VCCK";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_5v>;
-
-		/*
-		 * This is controlled by GPIOAO_9 we reserve this but
-		 * claiming it as done below reset the board anyway
-		 * Need to investigate this
-		 *
-		 * gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
-		 * enable-active-high;
-		 */
-		regulator-always-on;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_5v>;
-		regulator-always-on;
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3>;
-		regulator-always-on;
-	};
-
-	vddio_boot: regulator-vddio_boot {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_BOOT";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "amlogic,gx-sound-card";
-		model = "LIBRETECH-AC";
-		audio-widgets = "Speaker", "9J5-3 LEFT",
-				"Speaker", "9J5-2 RIGHT";
-		audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
-				"9J5-2 RIGHT", "ACODEC LORN";
-		assigned-clocks = <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>,
-				  <&clkc CLKID_MPLL2>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <294912000>,
-				       <270950400>,
-				       <393216000>;
-		status = "okay";
-
-		dai-link-0 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
-			dai-format = "i2s";
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
-			};
-
-			codec-1 {
-				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
-			};
-		};
-
-		dai-link-2 {
-			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&hdmi_tx>;
-			};
-		};
-
-		dai-link-3 {
-			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&acodec>;
-			};
-		};
-	};
-};
-
-&acodec {
-	AVDD-supply = <&vddio_ao18>;
-	status = "okay";
-};
-
-&aiu {
-	status = "okay";
-};
-
-&cec_AO {
-	status = "okay";
-	pinctrl-0 = <&ao_cec_pins>;
-	pinctrl-names = "default";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&ethmac {
-	status = "okay";
-};
-
-&internal_phy {
-	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
-	pinctrl-names = "default";
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-};
-
-&hdmi_tx {
-	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
-	pinctrl-names = "default";
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&gpio_ao {
-	gpio-line-names = "UART TX",
-			  "UART RX",
-			  "7J1 Header Pin31",
-			  "", "", "", "",
-			  "IR In",
-			  "HDMI CEC",
-			  "5V VCCK Regulator",
-			  /* GPIO_TEST_N */
-			  "";
-};
-
-&gpio {
-	gpio-line-names = /* Bank GPIOZ */
-			  "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "",
-			  "Eth Link LED", "Eth Activity LED",
-			  /* Bank GPIOH */
-			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
-			  "", "7J1 Header Pin13",
-			  "7J1 Header Pin15",
-			  "7J1 Header Pin7",
-			  "7J1 Header Pin12",
-			  "7J1 Header Pin16",
-			  "7J1 Header Pin18",
-			  /* Bank BOOT */
-			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
-			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
-			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
-			  "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk",
-			  "", "SPI NOR Chip Select",
-			  /* Bank CARD */
-			  "", "", "", "", "", "", "",
-			  /* Bank GPIODV */
-			  "", "", "", "", "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "", "", "", "", "",
-			  "7J1 Header Pin27", "7J1 Header Pin28", "",
-			  "7J1 Header Pin29",
-			  "VCCK Regulator", "VDDEE Regulator",
-			  /* Bank GPIOX */
-			  "7J1 Header Pin22", "7J1 Header Pin26",
-			  "7J1 Header Pin36", "7J1 Header Pin38",
-			  "7J1 Header Pin40", "7J1 Header Pin37",
-			  "7J1 Header Pin33", "7J1 Header Pin35",
-			  "7J1 Header Pin19", "7J1 Header Pin21",
-			  "7J1 Header Pin24", "7J1 Header Pin23",
-			  "7J1 Header Pin8", "7J1 Header Pin10",
-			  "", "", "7J1 Header Pin32", "", "",
-			  /* Bank GPIOCLK */
-			  "", "";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_boot>;
-};
-
-/* eMMC */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	max-frequency = <200000000>;
-	disable-wp;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-&spifc {
-	status = "okay";
-	pinctrl-0 = <&nor_pins>;
-	pinctrl-names = "default";
-
-	w25q32: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <3000000>;
-	};
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	status = "okay";
-	dr_mode = "host";
-};
diff --git a/arch/arm/dts/meson-gxl-s805x.dtsi b/arch/arm/dts/meson-gxl-s805x.dtsi
deleted file mode 100644
index 2997584982..0000000000
--- a/arch/arm/dts/meson-gxl-s805x.dtsi
+++ /dev/null
@@ -1,23 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 BayLibre SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include "meson-gxl-s905x.dtsi"
-
-/ {
-	compatible = "amlogic,s805x", "amlogic,meson-gxl";
-};
-
-/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */
-&gpu_opp_table {
-	opp-744000000 {
-		status = "disabled";
-	};
-};
-
-&mali {
-	/delete-property/ assigned-clocks;
-	/delete-property/ assigned-clock-rates;
-};
diff --git a/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts b/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts
deleted file mode 100644
index 100a1cfeea..0000000000
--- a/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts
+++ /dev/null
@@ -1,16 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 BayLibre SAS. All rights reserved.
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxl-s905d.dtsi"
-#include "meson-gx-libretech-pc.dtsi"
-
-/ {
-	compatible = "libretech,aml-s905d-pc", "amlogic,s905d",
-		     "amlogic,meson-gxl";
-	model = "Libre Computer AML-S905D-PC";
-};
diff --git a/arch/arm/dts/meson-gxl-s905d.dtsi b/arch/arm/dts/meson-gxl-s905d.dtsi
deleted file mode 100644
index 4332191954..0000000000
--- a/arch/arm/dts/meson-gxl-s905d.dtsi
+++ /dev/null
@@ -1,12 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#include "meson-gxl.dtsi"
-#include "meson-gxl-mali.dtsi"
-
-/ {
-	compatible = "amlogic,s905d", "amlogic,meson-gxl";
-};
diff --git a/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts
deleted file mode 100644
index a18d6d241a..0000000000
--- a/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts
+++ /dev/null
@@ -1,247 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
- * Copyright (c) 2020 JetHome
- * Author: Aleksandr Kazantsev <ak@tvip.ru>
- * Author: Alexey Shevelkin <ash@tvip.ru>
- * Author: Vyacheslav Bocharov <adeep@lexina.in>
- */
-
-/dts-v1/;
-
-#include "meson-gxl.dtsi"
-
-/ {
-	compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl";
-	model = "JetHome JetHub J80";
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-
-	reserved-memory {
-		linux,cma {
-			size = <0x0 0x1000000>;
-		};
-	};
-
-	aliases {
-		serial0 = &uart_AO;   /* Console */
-		serial1 = &uart_A;    /* Bluetooth */
-		serial2 = &uart_AO_B; /* Wireless module 1 */
-		serial3 = &uart_C;    /* Wireless module 2 */
-		ethernet0 = &ethmac;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vddio_boot: regulator-vddio_boot {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_BOOT";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vddao_3v3: regulator-vddao_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	wifi32k: wifi32k {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
-		clocks = <&wifi32k>;
-		clock-names = "ext_clock";
-	};
-};
-
-&efuse {
-	bt_mac: bt-mac@6 {
-		reg = <0x6 0x6>;
-	};
-
-	wifi_mac: wifi-mac@c {
-		reg = <0xc 0x6>;
-	};
-};
-
-&sn {
-	reg = <0x32 0x20>;
-};
-
-&eth_mac {
-	reg = <0x0 0x6>;
-};
-
-&bid {
-	reg = <0x12 0x20>;
-};
-
-&usb {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao18>;
-};
-
-/* Wireless SDIO Module */
-&sd_emmc_a {
-	status = "okay";
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-1 = <&sdio_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-
-	non-removable;
-	disable-wp;
-
-	/* WiFi firmware requires power to be kept while in suspend */
-	keep-power-in-suspend;
-
-	mmc-pwrseq = <&sdio_pwrseq>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-/* SD card */
-&sd_emmc_b {
-	status = "okay";
-	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-1 = <&sdcard_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-	disable-wp;
-
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-/* eMMC */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	max-frequency = <200000000>;
-	non-removable;
-	disable-wp;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-/* Console UART */
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-/* S905W only has access to its internal PHY */
-&ethmac {
-	status = "okay";
-	phy-mode = "rmii";
-	phy-handle = <&internal_phy>;
-};
-
-&internal_phy {
-	status = "okay";
-	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
-	pinctrl-names = "default";
-};
-
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
-		host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
-       };
-};
-
-&uart_C {
-	status = "okay";
-	pinctrl-0 = <&uart_c_pins>;
-	pinctrl-names = "default";
-};
-
-&uart_AO_B {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-};
-
-&i2c_B {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c_b_pins>;
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-		status = "okay";
-	};
-};
diff --git a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts b/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
deleted file mode 100644
index 02f81839d4..0000000000
--- a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
+++ /dev/null
@@ -1,237 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
- */
-
-/dts-v1/;
-
-#include "meson-gxl-s905x-p212.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
-	compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
-	model = "Khadas VIM";
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1710000>;
-
-		button-function {
-			label = "Function";
-			linux,code = <KEY_FN>;
-			press-threshold-microvolt = <10000>;
-		};
-	};
-
-	aliases {
-		serial2 = &uart_AO_B;
-		ethernet0 = &ethmac;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		power-button {
-			label = "power";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "vim:red:power";
-			pwms = <&pwm_AO_ab 1 7812500 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "amlogic,gx-sound-card";
-		model = "KHADAS-VIM";
-		assigned-clocks = <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>,
-				  <&clkc CLKID_MPLL2>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <294912000>,
-				       <270950400>,
-				       <393216000>;
-		status = "okay";
-
-		dai-link-0 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
-			dai-format = "i2s";
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
-			};
-		};
-
-		dai-link-2 {
-			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&hdmi_tx>;
-			};
-		};
-	};
-};
-
-&aiu {
-	status = "okay";
-};
-
-&cec_AO {
-	status = "okay";
-	pinctrl-0 = <&ao_cec_pins>;
-	pinctrl-names = "default";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&hdmi_tx {
-	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
-	pinctrl-names = "default";
-	hdmi-supply = <&hdmi_5v>;
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&i2c_A {
-	status = "okay";
-	pinctrl-0 = <&i2c_a_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c_B {
-	status = "okay";
-	pinctrl-0 = <&i2c_b_pins>;
-	pinctrl-names = "default";
-
-	rtc: rtc@51 {
-		status = "okay";
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-output-names = "xin32k";
-	};
-};
-
-&ir {
-	linux,rc-map-name = "rc-khadas";
-};
-
-&gpio_ao {
-	gpio-line-names = "UART TX",
-			  "UART RX",
-			  "Power Key In",
-			  "J9 Header Pin35",
-			  "J9 Header Pin16",
-			  "J9 Header Pin15",
-			  "J9 Header Pin33",
-			  "IR In",
-			  "HDMI CEC",
-			  "SYS LED",
-			  /* GPIO_TEST_N */
-			  "";
-};
-
-&gpio {
-	gpio-line-names = /* Bank GPIOZ */
-			  "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "",
-			  "Power OFF",
-			  "VCCK Enable",
-			  /* Bank GPIOH */
-			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
-			  "HDMI_5V_EN", "SPDIF",
-			  "J9 Header Pin37",
-			  "J9 Header Pin30",
-			  "J9 Header Pin29",
-			  "J9 Header Pin32",
-			  "J9 Header Pin31",
-			  /* Bank BOOT */
-			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
-			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
-			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
-			  "", "BOOT_MODE", "", "", "eMMC Data Strobe",
-			  /* Bank CARD */
-			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
-			  "SDCard D3", "SDCard D2", "SDCard Det",
-			  /* Bank GPIODV */
-			  "", "", "", "", "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "", "", "", "", "",
-			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
-			  "VCCK Regulator", "VDDEE Regulator",
-			  /* Bank GPIOX */
-			  "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
-			  "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
-			  "WIFI Power Enable", "WIFI WAKE HOST",
-			  "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
-			  "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
-			  "Bluetooth UART TX", "Bluetooth UART RX",
-			  "Bluetooth UART CTS", "Bluetooth UART RTS",
-			  "WIFI 32K", "Bluetooth Enable",
-			  "Bluetooth WAKE HOST",
-			  /* Bank GPIOCLK */
-			  "", "J9 Header Pin39";
-};
-
-&pwm_AO_ab {
-	status = "okay";
-	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
-	pinctrl-names = "default";
-	clocks = <&xtal> , <&xtal>;
-	clock-names = "clkin0", "clkin1" ;
-};
-
-&pwm_ef {
-	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
-};
-
-&sd_emmc_a {
-	max-frequency = <100000000>;
-};
-
-/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
-&uart_AO {
-	status = "okay";
-};
-
-/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
-&uart_AO_B {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_b_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	dr_mode = "peripheral";
-};
diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts
deleted file mode 100644
index 6c4e68e0e6..0000000000
--- a/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts
+++ /dev/null
@@ -1,313 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 BayLibre, SAS.
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-#include "meson-gxl-s905x.dtsi"
-
-/ {
-	compatible = "libretech,aml-s905x-cc-v2", "amlogic,s905x",
-		     "amlogic,meson-gxl";
-	model = "Libre Computer AML-S905X-CC V2";
-
-	aliases {
-		serial0 = &uart_AO;
-		ethernet0 = &ethmac;
-		spi0 = &spifc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-blue {
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			panic-indicator;
-		};
-
-		led-green {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_DISK_ACTIVITY;
-			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-	ao_5v: regulator-ao_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "AO_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_in>;
-		regulator-always-on;
-	};
-
-	dc_in: regulator-dc_in {
-		compatible = "regulator-fixed";
-		regulator-name = "DC_IN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vcck: regulator-vcck {
-		compatible = "regulator-fixed";
-		regulator-name = "VCCK";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&ao_5v>;
-		regulator-always-on;
-	};
-
-	vcc_card: regulator-vcc_card {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_CARD";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vddio_ao3v3>;
-
-		gpio = <&gpio GPIOCLK_1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vcc5v: regulator-vcc5v {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&ao_5v>;
-
-		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
-	};
-
-	vddio_ao3v3: regulator-vddio_ao3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&ao_5v>;
-		regulator-always-on;
-	};
-
-	vddio_card: regulator-vddio-card {
-		compatible = "regulator-gpio";
-		regulator-name = "VDDIO_CARD";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
-		gpios-states = <0>;
-
-		states = <3300000 0>,
-			 <1800000 1>;
-
-		regulator-settling-time-up-us = <200>;
-		regulator-settling-time-down-us = <50000>;
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddio_ao3v3>;
-		regulator-always-on;
-	};
-
-	vcc_1v8: regulator-vcc_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC 1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddio_ao3v3>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "amlogic,gx-sound-card";
-		model = "LIBRETECH-CC-V2";
-		assigned-clocks = <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>,
-				  <&clkc CLKID_MPLL2>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <294912000>,
-				       <270950400>,
-				       <393216000>;
-		status = "okay";
-
-		dai-link-0 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
-			dai-format = "i2s";
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
-			};
-		};
-
-		dai-link-2 {
-			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&hdmi_tx>;
-			};
-		};
-	};
-};
-
-&aiu {
-	status = "okay";
-};
-
-&cec_AO {
-	status = "okay";
-	pinctrl-0 = <&ao_cec_pins>;
-	pinctrl-names = "default";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&ethmac {
-	status = "okay";
-};
-
-&internal_phy {
-	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
-	pinctrl-names = "default";
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-};
-
-&hdmi_tx {
-	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
-	hdmi-supply = <&vcc5v>;
-	pinctrl-names = "default";
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao18>;
-};
-
-/* SD card */
-&sd_emmc_b {
-	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-1 = <&sdcard_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-ddr50;
-	max-frequency = <100000000>;
-	disable-wp;
-
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
-	vmmc-supply = <&vcc_card>;
-	vqmmc-supply = <&vddio_card>;
-
-	status = "okay";
-};
-
-/* eMMC */
-&sd_emmc_c {
-	pinctrl-0 = <&emmc_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	max-frequency = <200000000>;
-	disable-wp;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vddio_ao3v3>;
-	vqmmc-supply = <&vcc_1v8>;
-
-	status = "okay";
-};
-
-&spifc {
-	status = "okay";
-	pinctrl-0 = <&nor_pins>;
-	pinctrl-names = "default";
-
-	nor_4u1: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <3000000>;
-	};
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb2_phy0 {
-	phy-supply = <&vcc5v>;
-};
-
-&usb2_phy1 {
-	phy-supply = <&vcc5v>;
-};
diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
deleted file mode 100644
index 82bfabfbd3..0000000000
--- a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
+++ /dev/null
@@ -1,356 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-#include "meson-gxl-s905x.dtsi"
-
-/ {
-	compatible = "libretech,aml-s905x-cc", "amlogic,s905x",
-		     "amlogic,meson-gxl";
-	model = "Libre Computer AML-S905X-CC";
-
-	aliases {
-		serial0 = &uart_AO;
-		ethernet0 = &ethmac;
-	};
-
-	dio2133: analog-amplifier {
-		compatible = "simple-audio-amplifier";
-		sound-name-prefix = "AU2";
-		VCC-supply = <&hdmi_5v>;
-		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cvbs-connector {
-		compatible = "composite-video-connector";
-
-		port {
-			cvbs_connector_in: endpoint {
-				remote-endpoint = <&cvbs_vdac_out>;
-			};
-		};
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-system {
-			label = "librecomputer:system-status";
-			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			panic-indicator;
-		};
-
-		led-blue {
-			label = "librecomputer:blue";
-			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-	hdmi_5v: regulator-hdmi-5v {
-		compatible = "regulator-fixed";
-
-		regulator-name = "HDMI_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vcc_card: regulator-vcc-card {
-		compatible = "regulator-gpio";
-
-		regulator-name = "VCC_CARD";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
-		gpios-states = <0>;
-
-		states = <3300000 0>,
-			 <1800000 1>;
-
-		regulator-settling-time-up-us = <200>;
-		regulator-settling-time-down-us = <50000>;
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	/* This is provided by LDOs on the eMMC daugther card */
-	vddio_boot: regulator-vddio_boot {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_BOOT";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3>;
-	};
-
-	sound {
-		compatible = "amlogic,gx-sound-card";
-		model = "LIBRETECH-CC";
-		audio-aux-devs = <&dio2133>;
-		audio-widgets = "Line", "Lineout";
-		audio-routing = "AU2 INL", "ACODEC LOLN",
-				"AU2 INR", "ACODEC LORN",
-				"Lineout", "AU2 OUTL",
-				"Lineout", "AU2 OUTR";
-		assigned-clocks = <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>,
-				  <&clkc CLKID_MPLL2>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <294912000>,
-				       <270950400>,
-				       <393216000>;
-		status = "okay";
-
-		dai-link-0 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
-			dai-format = "i2s";
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
-			};
-
-			codec-1 {
-				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
-			};
-		};
-
-		dai-link-2 {
-			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&hdmi_tx>;
-			};
-		};
-
-		dai-link-3 {
-			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&acodec>;
-			};
-		};
-	};
-};
-
-&acodec {
-	AVDD-supply = <&vddio_ao18>;
-	status = "okay";
-};
-
-&aiu {
-	status = "okay";
-};
-
-&cec_AO {
-	status = "okay";
-	pinctrl-0 = <&ao_cec_pins>;
-	pinctrl-names = "default";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&ethmac {
-	status = "okay";
-};
-
-&internal_phy {
-	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
-	pinctrl-names = "default";
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-};
-
-&hdmi_tx {
-	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
-	pinctrl-names = "default";
-	hdmi-supply = <&hdmi_5v>;
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&gpio_ao {
-	gpio-line-names = "UART TX",
-			  "UART RX",
-			  "Blue LED",
-			  "SDCard Voltage Switch",
-			  "7J1 Header Pin5",
-			  "7J1 Header Pin3",
-			  "7J1 Header Pin12",
-			  "IR In",
-			  "9J3 Switch HDMI CEC/7J1 Header Pin11",
-			  "7J1 Header Pin13",
-			  /* GPIO_TEST_N */
-			  "7J1 Header Pin15";
-};
-
-&gpio {
-	gpio-line-names = /* Bank GPIOZ */
-			  "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "",
-			  "Eth Link LED", "Eth Activity LED",
-			  /* Bank GPIOH */
-			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
-			  "HDMI_5V_EN", "9J1 Header Pin2",
-			  "Analog Audio Mute",
-			  "2J3 Header Pin6",
-			  "2J3 Header Pin5",
-			  "2J3 Header Pin4",
-			  "2J3 Header Pin3",
-			  /* Bank BOOT */
-			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
-			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
-			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
-			  "ALT BOOT MODE", "", "", "", "eMMC Data Strobe",
-			  /* Bank CARD */
-			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
-			  "SDCard D3", "SDCard D2", "SDCard Det",
-			  /* Bank GPIODV */
-			  "", "", "", "", "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "", "", "", "", "",
-			  "Green LED", "VCCK Enable",
-			  "7J1 Header Pin27", "7J1 Header Pin28",
-			  "VCCK Regulator", "VDDEE Regulator",
-			  /* Bank GPIOX */
-			  "7J1 Header Pin22", "7J1 Header Pin26",
-			  "7J1 Header Pin36", "7J1 Header Pin38",
-			  "7J1 Header Pin40", "7J1 Header Pin37",
-			  "7J1 Header Pin33", "7J1 Header Pin35",
-			  "7J1 Header Pin19", "7J1 Header Pin21",
-			  "7J1 Header Pin24", "7J1 Header Pin23",
-			  "7J1 Header Pin8", "7J1 Header Pin10",
-			  "7J1 Header Pin16", "7J1 Header Pin18",
-			  "7J1 Header Pin32", "7J1 Header Pin29",
-			  "7J1 Header Pin31",
-			  /* Bank GPIOCLK */
-			  "7J1 Header Pin7", "";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao18>;
-};
-
-/* SD card */
-&sd_emmc_b {
-	status = "okay";
-	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-1 = <&sdcard_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-	disable-wp;
-
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vcc_card>;
-};
-
-/* eMMC */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	max-frequency = <200000000>;
-	disable-wp;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb2_phy0 {
-	/*
-	 * even though the schematics don't show it:
-	 * HDMI_5V is also used as supply for the USB VBUS.
-	 */
-	phy-supply = <&hdmi_5v>;
-};
diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dts b/arch/arm/dts/meson-gxl-s905x-p212.dts
deleted file mode 100644
index 9b4ea6a493..0000000000
--- a/arch/arm/dts/meson-gxl-s905x-p212.dts
+++ /dev/null
@@ -1,134 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxl-s905x-p212.dtsi"
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
-	compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
-	model = "Amlogic Meson GXL (S905X) P212 Development Board";
-
-	dio2133: analog-amplifier {
-		compatible = "simple-audio-amplifier";
-		sound-name-prefix = "AU2";
-		VCC-supply = <&hdmi_5v>;
-		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
-	};
-
-	cvbs-connector {
-		compatible = "composite-video-connector";
-
-		port {
-			cvbs_connector_in: endpoint {
-				remote-endpoint = <&cvbs_vdac_out>;
-			};
-		};
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "amlogic,gx-sound-card";
-		model = "S905X-P212";
-		audio-aux-devs = <&dio2133>;
-		audio-widgets = "Line", "Lineout";
-		audio-routing = "AU2 INL", "ACODEC LOLN",
-				"AU2 INR", "ACODEC LORN",
-				"Lineout", "AU2 OUTL",
-				"Lineout", "AU2 OUTR";
-		assigned-clocks = <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>,
-				  <&clkc CLKID_MPLL2>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <294912000>,
-				       <270950400>,
-				       <393216000>;
-		dai-link-0 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
-			dai-format = "i2s";
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
-			};
-
-			codec-1 {
-				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
-			};
-		};
-
-		dai-link-2 {
-			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&hdmi_tx>;
-			};
-		};
-
-		dai-link-3 {
-			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&acodec>;
-			};
-		};
-	};
-};
-
-&acodec {
-	AVDD-supply = <&vddio_ao18>;
-	status = "okay";
-};
-
-&aiu {
-	status = "okay";
-};
-
-&cec_AO {
-	status = "okay";
-	pinctrl-0 = <&ao_cec_pins>;
-	pinctrl-names = "default";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&hdmi_tx {
-	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
-	pinctrl-names = "default";
-	hdmi-supply = <&hdmi_5v>;
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
-	status = "okay";
-};
diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/arch/arm/dts/meson-gxl-s905x-p212.dtsi
deleted file mode 100644
index a150cc0e18..0000000000
--- a/arch/arm/dts/meson-gxl-s905x-p212.dtsi
+++ /dev/null
@@ -1,213 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
- * Based on meson-gx-p23x-q20x.dtsi:
- * - Copyright (c) 2016 Endless Computers, Inc.
- *   Author: Carlo Caione <carlo@endlessm.com>
- * - Copyright (c) 2016 BayLibre, SAS.
- *   Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/* Common DTSI for devices which are based on the P212 reference board. */
-
-#include "meson-gxl-s905x.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart_AO;
-		ethernet0 = &ethmac;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-	hdmi_5v: regulator-hdmi-5v {
-		compatible = "regulator-fixed";
-
-		regulator-name = "HDMI_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	vddio_boot: regulator-vddio_boot {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_BOOT";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vddao_3v3: regulator-vddao_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	wifi32k: wifi32k {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
-		clocks = <&wifi32k>;
-		clock-names = "ext_clock";
-	};
-};
-
-&ethmac {
-	status = "okay";
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-};
-
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao18>;
-};
-
-/* Wireless SDIO Module */
-&sd_emmc_a {
-	status = "okay";
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-1 = <&sdio_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-
-	non-removable;
-	disable-wp;
-
-	/* WiFi firmware requires power to be kept while in suspend */
-	keep-power-in-suspend;
-
-	mmc-pwrseq = <&sdio_pwrseq>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-/* SD card */
-&sd_emmc_b {
-	status = "okay";
-	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-1 = <&sdcard_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-	disable-wp;
-
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-/* eMMC */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	max-frequency = <200000000>;
-	non-removable;
-	disable-wp;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-/* This is connected to the Bluetooth module: */
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
-		max-speed = <2000000>;
-		clocks = <&wifi32k>;
-		clock-names = "lpo";
-	};
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb2_phy0 {
-	/*
-	 * HDMI_5V is also used as supply for the USB VBUS.
-	 */
-	phy-supply = <&hdmi_5v>;
-};
diff --git a/arch/arm/dts/meson-gxl-s905x.dtsi b/arch/arm/dts/meson-gxl-s905x.dtsi
deleted file mode 100644
index 40c19f69e9..0000000000
--- a/arch/arm/dts/meson-gxl-s905x.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#include "meson-gxl.dtsi"
-#include "meson-gxl-mali.dtsi"
-
-/ {
-	compatible = "amlogic,s905x", "amlogic,meson-gxl";
-};
-
-/* S905X only has access to its internal PHY */
-&ethmac {
-	phy-mode = "rmii";
-	phy-handle = <&internal_phy>;
-};
diff --git a/arch/arm/dts/meson-gxl.dtsi b/arch/arm/dts/meson-gxl.dtsi
deleted file mode 100644
index 17bcfa4702..0000000000
--- a/arch/arm/dts/meson-gxl.dtsi
+++ /dev/null
@@ -1,940 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#include "meson-gx.dtsi"
-#include <dt-bindings/clock/gxbb-clkc.h>
-#include <dt-bindings/clock/gxbb-aoclkc.h>
-#include <dt-bindings/gpio/meson-gxl-gpio.h>
-#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
-
-/ {
-	compatible = "amlogic,meson-gxl";
-
-	soc {
-		usb: usb@d0078080 {
-			compatible = "amlogic,meson-gxl-usb-ctrl";
-			reg = <0x0 0xd0078080 0x0 0x20>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
-			clock-names = "usb_ctrl", "ddr";
-			resets = <&reset RESET_USB_OTG>;
-
-			dr_mode = "otg";
-
-			phys = <&usb2_phy0>, <&usb2_phy1>;
-			phy-names = "usb2-phy0", "usb2-phy1";
-
-			dwc2: usb@c9100000 {
-				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
-				reg = <0x0 0xc9100000 0x0 0x40000>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clkc CLKID_USB1>;
-				clock-names = "otg";
-				phys = <&usb2_phy1>;
-				dr_mode = "peripheral";
-				g-rx-fifo-size = <192>;
-				g-np-tx-fifo-size = <128>;
-				g-tx-fifo-size = <128 128 16 16 16>;
-			};
-
-			dwc3: usb@c9000000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0xc9000000 0x0 0x100000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				dr_mode = "host";
-				maximum-speed = "high-speed";
-				snps,dis_u2_susphy_quirk;
-			};
-		};
-
-		acodec: audio-controller@c8832000 {
-			compatible = "amlogic,t9015";
-			reg = <0x0 0xc8832000 0x0 0x14>;
-			#sound-dai-cells = <0>;
-			sound-name-prefix = "ACODEC";
-			clocks = <&clkc CLKID_ACODEC>;
-			clock-names = "pclk";
-			resets = <&reset RESET_ACODEC>;
-			status = "disabled";
-		};
-
-		crypto: crypto@c883e000 {
-			compatible = "amlogic,gxl-crypto";
-			reg = <0x0 0xc883e000 0x0 0x36>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkc CLKID_BLKMV>;
-			clock-names = "blkmv";
-			status = "okay";
-		};
-	};
-};
-
-&aiu {
-	compatible = "amlogic,aiu-gxl", "amlogic,aiu";
-	clocks = <&clkc CLKID_AIU_GLUE>,
-		 <&clkc CLKID_I2S_OUT>,
-		 <&clkc CLKID_AOCLK_GATE>,
-		 <&clkc CLKID_CTS_AMCLK>,
-		 <&clkc CLKID_MIXER_IFACE>,
-		 <&clkc CLKID_IEC958>,
-		 <&clkc CLKID_IEC958_GATE>,
-		 <&clkc CLKID_CTS_MCLK_I958>,
-		 <&clkc CLKID_CTS_I958>;
-	clock-names = "pclk",
-		      "i2s_pclk",
-		      "i2s_aoclk",
-		      "i2s_mclk",
-		      "i2s_mixer",
-		      "spdif_pclk",
-		      "spdif_aoclk",
-		      "spdif_mclk",
-		      "spdif_mclk_sel";
-	resets = <&reset RESET_AIU>;
-};
-
-&apb {
-	usb2_phy0: phy@78000 {
-		compatible = "amlogic,meson-gxl-usb2-phy";
-		#phy-cells = <0>;
-		reg = <0x0 0x78000 0x0 0x20>;
-		clocks = <&clkc CLKID_USB>;
-		clock-names = "phy";
-		resets = <&reset RESET_USB_OTG>;
-		reset-names = "phy";
-		status = "okay";
-	};
-
-	usb2_phy1: phy@78020 {
-		compatible = "amlogic,meson-gxl-usb2-phy";
-		#phy-cells = <0>;
-		reg = <0x0 0x78020 0x0 0x20>;
-		clocks = <&clkc CLKID_USB>;
-		clock-names = "phy";
-		resets = <&reset RESET_USB_OTG>;
-		reset-names = "phy";
-		status = "okay";
-	};
-};
-
-&efuse {
-	clocks = <&clkc CLKID_EFUSE>;
-};
-
-&ethmac {
-	clocks = <&clkc CLKID_ETH>,
-		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>,
-		 <&clkc CLKID_FCLK_DIV2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
-
-	mdio0: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-	};
-};
-
-&aobus {
-	pinctrl_aobus: pinctrl@14 {
-		compatible = "amlogic,meson-gxl-aobus-pinctrl";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		gpio_ao: bank@14 {
-			reg = <0x0 0x00014 0x0 0x8>,
-			      <0x0 0x0002c 0x0 0x4>,
-			      <0x0 0x00024 0x0 0x8>;
-			reg-names = "mux", "pull", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_aobus 0 0 14>;
-		};
-
-		uart_ao_a_pins: uart_ao_a {
-			mux {
-				groups = "uart_tx_ao_a", "uart_rx_ao_a";
-				function = "uart_ao";
-				bias-disable;
-			};
-		};
-
-		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
-			mux {
-				groups = "uart_cts_ao_a",
-				       "uart_rts_ao_a";
-				function = "uart_ao";
-				bias-disable;
-			};
-		};
-
-		uart_ao_b_pins: uart_ao_b {
-			mux {
-				groups = "uart_tx_ao_b", "uart_rx_ao_b";
-				function = "uart_ao_b";
-				bias-disable;
-			};
-		};
-
-		uart_ao_b_0_1_pins: uart_ao_b_0_1 {
-			mux {
-				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
-				function = "uart_ao_b";
-				bias-disable;
-			};
-		};
-
-		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
-			mux {
-				groups = "uart_cts_ao_b",
-				       "uart_rts_ao_b";
-				function = "uart_ao_b";
-				bias-disable;
-			};
-		};
-
-		remote_input_ao_pins: remote_input_ao {
-			mux {
-				groups = "remote_input_ao";
-				function = "remote_input_ao";
-				bias-disable;
-			};
-		};
-
-		i2c_ao_pins: i2c_ao {
-			mux {
-				groups = "i2c_sck_ao",
-				       "i2c_sda_ao";
-				function = "i2c_ao";
-				bias-disable;
-			};
-		};
-
-		pwm_ao_a_3_pins: pwm_ao_a_3 {
-			mux {
-				groups = "pwm_ao_a_3";
-				function = "pwm_ao_a";
-				bias-disable;
-			};
-		};
-
-		pwm_ao_a_8_pins: pwm_ao_a_8 {
-			mux {
-				groups = "pwm_ao_a_8";
-				function = "pwm_ao_a";
-				bias-disable;
-			};
-		};
-
-		pwm_ao_b_pins: pwm_ao_b {
-			mux {
-				groups = "pwm_ao_b";
-				function = "pwm_ao_b";
-				bias-disable;
-			};
-		};
-
-		pwm_ao_b_6_pins: pwm_ao_b_6 {
-			mux {
-				groups = "pwm_ao_b_6";
-				function = "pwm_ao_b";
-				bias-disable;
-			};
-		};
-
-		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
-			mux {
-				groups = "i2s_out_ch23_ao";
-				function = "i2s_out_ao";
-				bias-disable;
-			};
-		};
-
-		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
-			mux {
-				groups = "i2s_out_ch45_ao";
-				function = "i2s_out_ao";
-				bias-disable;
-			};
-		};
-
-		spdif_out_ao_6_pins: spdif_out_ao_6 {
-			mux {
-				groups = "spdif_out_ao_6";
-				function = "spdif_out_ao";
-				bias-disable;
-			};
-		};
-
-		spdif_out_ao_9_pins: spdif_out_ao_9 {
-			mux {
-				groups = "spdif_out_ao_9";
-				function = "spdif_out_ao";
-				bias-disable;
-			};
-		};
-
-		ao_cec_pins: ao_cec {
-			mux {
-				groups = "ao_cec";
-				function = "cec_ao";
-				bias-disable;
-			};
-		};
-
-		ee_cec_pins: ee_cec {
-			mux {
-				groups = "ee_cec";
-				function = "cec_ao";
-				bias-disable;
-			};
-		};
-	};
-};
-
-&cec_AO {
-	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
-	clock-names = "core";
-};
-
-&clkc_AO {
-	compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
-	clocks = <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "xtal", "mpeg-clk";
-};
-
-&gpio_intc {
-	compatible = "amlogic,meson-gxl-gpio-intc",
-		     "amlogic,meson-gpio-intc";
-	status = "okay";
-};
-
-&hdmi_tx {
-	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
-	resets = <&reset RESET_HDMITX_CAPB3>,
-		 <&reset RESET_HDMI_SYSTEM_RESET>,
-		 <&reset RESET_HDMI_TX>;
-	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
-		 <&clkc CLKID_GCLK_VENCI_INT0>;
-	clock-names = "isfr", "iahb", "venci";
-};
-
-&sysctrl {
-	clkc: clock-controller {
-		compatible = "amlogic,gxl-clkc";
-		#clock-cells = <1>;
-		clocks = <&xtal>;
-		clock-names = "xtal";
-	};
-};
-
-&hwrng {
-	clocks = <&clkc CLKID_RNG0>;
-	clock-names = "core";
-};
-
-&i2c_A {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
-	clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&periphs {
-	pinctrl_periphs: pinctrl@4b0 {
-		compatible = "amlogic,meson-gxl-periphs-pinctrl";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		gpio: bank@4b0 {
-			reg = <0x0 0x004b0 0x0 0x28>,
-			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00520 0x0 0x14>,
-			      <0x0 0x00430 0x0 0x40>;
-			reg-names = "mux", "pull", "pull-enable", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_periphs 0 0 100>;
-		};
-
-		emmc_pins: emmc {
-			mux-0 {
-				groups = "emmc_nand_d07",
-				       "emmc_cmd";
-				function = "emmc";
-				bias-pull-up;
-			};
-
-			mux-1 {
-				groups = "emmc_clk";
-				function = "emmc";
-				bias-disable;
-			};
-		};
-
-		emmc_ds_pins: emmc-ds {
-			mux {
-				groups = "emmc_ds";
-				function = "emmc";
-				bias-pull-down;
-			};
-		};
-
-		emmc_clk_gate_pins: emmc_clk_gate {
-			mux {
-				groups = "BOOT_8";
-				function = "gpio_periphs";
-				bias-pull-down;
-			};
-		};
-
-		nor_pins: nor {
-			mux {
-				groups = "nor_d",
-				       "nor_q",
-				       "nor_c",
-				       "nor_cs";
-				function = "nor";
-				bias-disable;
-			};
-		};
-
-		spi_pins: spi-pins {
-			mux {
-				groups = "spi_miso",
-					"spi_mosi",
-					"spi_sclk";
-				function = "spi";
-				bias-disable;
-			};
-		};
-
-		spi_idle_high_pins: spi-idle-high-pins {
-			mux {
-				groups = "spi_sclk";
-				bias-pull-up;
-			};
-		};
-
-		spi_idle_low_pins: spi-idle-low-pins {
-			mux {
-				groups = "spi_sclk";
-				bias-pull-down;
-			};
-		};
-
-		spi_ss0_pins: spi-ss0 {
-			mux {
-				groups = "spi_ss0";
-				function = "spi";
-				bias-disable;
-			};
-		};
-
-		sdcard_pins: sdcard {
-			mux-0 {
-				groups = "sdcard_d0",
-				       "sdcard_d1",
-				       "sdcard_d2",
-				       "sdcard_d3",
-				       "sdcard_cmd";
-				function = "sdcard";
-				bias-pull-up;
-			};
-
-			mux-1 {
-				groups = "sdcard_clk";
-				function = "sdcard";
-				bias-disable;
-			};
-		};
-
-		sdcard_clk_gate_pins: sdcard_clk_gate {
-			mux {
-				groups = "CARD_2";
-				function = "gpio_periphs";
-				bias-pull-down;
-			};
-		};
-
-		sdio_pins: sdio {
-			mux-0 {
-				groups = "sdio_d0",
-				       "sdio_d1",
-				       "sdio_d2",
-				       "sdio_d3",
-				       "sdio_cmd";
-				function = "sdio";
-				bias-pull-up;
-			};
-
-			mux-1 {
-				groups = "sdio_clk";
-				function = "sdio";
-				bias-disable;
-			};
-		};
-
-		sdio_clk_gate_pins: sdio_clk_gate {
-			mux {
-				groups = "GPIOX_4";
-				function = "gpio_periphs";
-				bias-pull-down;
-			};
-		};
-
-		sdio_irq_pins: sdio_irq {
-			mux {
-				groups = "sdio_irq";
-				function = "sdio";
-				bias-disable;
-			};
-		};
-
-		uart_a_pins: uart_a {
-			mux {
-				groups = "uart_tx_a",
-				       "uart_rx_a";
-				function = "uart_a";
-				bias-disable;
-			};
-		};
-
-		uart_a_cts_rts_pins: uart_a_cts_rts {
-			mux {
-				groups = "uart_cts_a",
-				       "uart_rts_a";
-				function = "uart_a";
-				bias-disable;
-			};
-		};
-
-		uart_b_pins: uart_b {
-			mux {
-				groups = "uart_tx_b",
-				       "uart_rx_b";
-				function = "uart_b";
-				bias-disable;
-			};
-		};
-
-		uart_b_cts_rts_pins: uart_b_cts_rts {
-			mux {
-				groups = "uart_cts_b",
-				       "uart_rts_b";
-				function = "uart_b";
-				bias-disable;
-			};
-		};
-
-		uart_c_pins: uart_c {
-			mux {
-				groups = "uart_tx_c",
-				       "uart_rx_c";
-				function = "uart_c";
-				bias-disable;
-			};
-		};
-
-		uart_c_cts_rts_pins: uart_c_cts_rts {
-			mux {
-				groups = "uart_cts_c",
-				       "uart_rts_c";
-				function = "uart_c";
-				bias-disable;
-			};
-		};
-
-		i2c_a_pins: i2c_a {
-			mux {
-				groups = "i2c_sck_a",
-				     "i2c_sda_a";
-				function = "i2c_a";
-				bias-disable;
-			};
-		};
-
-		i2c_b_pins: i2c_b {
-			mux {
-				groups = "i2c_sck_b",
-				      "i2c_sda_b";
-				function = "i2c_b";
-				bias-disable;
-			};
-		};
-
-		i2c_c_pins: i2c_c {
-			mux {
-				groups = "i2c_sck_c",
-				      "i2c_sda_c";
-				function = "i2c_c";
-				bias-disable;
-			};
-		};
-
-		i2c_c_dv18_pins: i2c_c_dv18 {
-			mux {
-				groups = "i2c_sck_c_dv19",
-				      "i2c_sda_c_dv18";
-				function = "i2c_c";
-				bias-disable;
-			};
-		};
-
-		eth_pins: eth_c {
-			mux {
-				groups = "eth_mdio",
-				       "eth_mdc",
-				       "eth_clk_rx_clk",
-				       "eth_rx_dv",
-				       "eth_rxd0",
-				       "eth_rxd1",
-				       "eth_rxd2",
-				       "eth_rxd3",
-				       "eth_rgmii_tx_clk",
-				       "eth_tx_en",
-				       "eth_txd0",
-				       "eth_txd1",
-				       "eth_txd2",
-				       "eth_txd3";
-				function = "eth";
-				bias-disable;
-			};
-		};
-
-		eth_link_led_pins: eth_link_led {
-			mux {
-				groups = "eth_link_led";
-				function = "eth_led";
-				bias-disable;
-			};
-		};
-
-		eth_act_led_pins: eth_act_led {
-			mux {
-				groups = "eth_act_led";
-				function = "eth_led";
-			};
-		};
-		
-		pwm_a_pins: pwm_a {
-			mux {
-				groups = "pwm_a";
-				function = "pwm_a";
-				bias-disable;
-			};
-		};
-
-		pwm_b_pins: pwm_b {
-			mux {
-				groups = "pwm_b";
-				function = "pwm_b";
-				bias-disable;
-			};
-		};
-
-		pwm_c_pins: pwm_c {
-			mux {
-				groups = "pwm_c";
-				function = "pwm_c";
-				bias-disable;
-			};
-		};
-
-		pwm_d_pins: pwm_d {
-			mux {
-				groups = "pwm_d";
-				function = "pwm_d";
-				bias-disable;
-			};
-		};
-
-		pwm_e_pins: pwm_e {
-			mux {
-				groups = "pwm_e";
-				function = "pwm_e";
-				bias-disable;
-			};
-		};
-
-		pwm_f_clk_pins: pwm_f_clk {
-			mux {
-				groups = "pwm_f_clk";
-				function = "pwm_f";
-				bias-disable;
-			};
-		};
-
-		pwm_f_x_pins: pwm_f_x {
-			mux {
-				groups = "pwm_f_x";
-				function = "pwm_f";
-				bias-disable;
-			};
-		};
-
-		hdmi_hpd_pins: hdmi_hpd {
-			mux {
-				groups = "hdmi_hpd";
-				function = "hdmi_hpd";
-				bias-disable;
-			};
-		};
-
-		hdmi_i2c_pins: hdmi_i2c {
-			mux {
-				groups = "hdmi_sda", "hdmi_scl";
-				function = "hdmi_i2c";
-				bias-disable;
-			};
-		};
-
-		i2s_am_clk_pins: i2s_am_clk {
-			mux {
-				groups = "i2s_am_clk";
-				function = "i2s_out";
-				bias-disable;
-			};
-		};
-
-		i2s_out_ao_clk_pins: i2s_out_ao_clk {
-			mux {
-				groups = "i2s_out_ao_clk";
-				function = "i2s_out";
-				bias-disable;
-			};
-		};
-
-		i2s_out_lr_clk_pins: i2s_out_lr_clk {
-			mux {
-				groups = "i2s_out_lr_clk";
-				function = "i2s_out";
-				bias-disable;
-			};
-		};
-
-		i2s_out_ch01_pins: i2s_out_ch01 {
-			mux {
-				groups = "i2s_out_ch01";
-				function = "i2s_out";
-				bias-disable;
-			};
-		};
-		i2sout_ch23_z_pins: i2sout_ch23_z {
-			mux {
-				groups = "i2sout_ch23_z";
-				function = "i2s_out";
-				bias-disable;
-			};
-		};
-
-		i2sout_ch45_z_pins: i2sout_ch45_z {
-			mux {
-				groups = "i2sout_ch45_z";
-				function = "i2s_out";
-				bias-disable;
-			};
-		};
-
-		i2sout_ch67_z_pins: i2sout_ch67_z {
-			mux {
-				groups = "i2sout_ch67_z";
-				function = "i2s_out";
-				bias-disable;
-			};
-		};
-
-		spdif_out_h_pins: spdif_out_ao_h {
-			mux {
-				groups = "spdif_out_h";
-				function = "spdif_out";
-				bias-disable;
-			};
-		};
-	};
-
-	eth_phy_mux: mdio@558 {
-		reg = <0x0 0x558 0x0 0xc>;
-		compatible = "amlogic,gxl-mdio-mux";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clkc CLKID_FCLK_DIV4>;
-		clock-names = "ref";
-		mdio-parent-bus = <&mdio0>;
-
-		external_mdio: mdio@0 {
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		internal_mdio: mdio@1 {
-			reg = <0x1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			internal_phy: ethernet-phy@8 {
-				compatible = "ethernet-phy-id0181.4400";
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <8>;
-				max-speed = <100>;
-			};
-		};
-	};
-};
-
-&pwrc {
-	resets = <&reset RESET_VIU>,
-		 <&reset RESET_VENC>,
-		 <&reset RESET_VCBUS>,
-		 <&reset RESET_BT656>,
-		 <&reset RESET_DVIN_RESET>,
-		 <&reset RESET_RDMA>,
-		 <&reset RESET_VENCI>,
-		 <&reset RESET_VENCP>,
-		 <&reset RESET_VDAC>,
-		 <&reset RESET_VDI6>,
-		 <&reset RESET_VENCL>,
-		 <&reset RESET_VID_LOCK>;
-	reset-names = "viu", "venc", "vcbus", "bt656",
-		      "dvin", "rdma", "venci", "vencp",
-		      "vdac", "vdi6", "vencl", "vid_lock";
-	clocks = <&clkc CLKID_VPU>,
-	         <&clkc CLKID_VAPB>;
-	clock-names = "vpu", "vapb";
-	/*
-	 * VPU clocking is provided by two identical clock paths
-	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
-	 * free mux to safely change frequency while running.
-	 * Same for VAPB but with a final gate after the glitch free mux.
-	 */
-	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
-			  <&clkc CLKID_VPU_0>,
-			  <&clkc CLKID_VPU>, /* Glitch free mux */
-			  <&clkc CLKID_VAPB_0_SEL>,
-			  <&clkc CLKID_VAPB_0>,
-			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
-	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
-				 <0>, /* Do Nothing */
-				 <&clkc CLKID_VPU_0>,
-				 <&clkc CLKID_FCLK_DIV4>,
-				 <0>, /* Do Nothing */
-				 <&clkc CLKID_VAPB_0>;
-	assigned-clock-rates = <0>, /* Do Nothing */
-			       <666666666>,
-			       <0>, /* Do Nothing */
-			       <0>, /* Do Nothing */
-			       <250000000>,
-			       <0>; /* Do Nothing */
-};
-
-&saradc {
-	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
-	clocks = <&xtal>,
-		 <&clkc CLKID_SAR_ADC>,
-		 <&clkc CLKID_SAR_ADC_CLK>,
-		 <&clkc CLKID_SAR_ADC_SEL>;
-	clock-names = "clkin", "core", "adc_clk", "adc_sel";
-};
-
-&sd_emmc_a {
-	clocks = <&clkc CLKID_SD_EMMC_A>,
-		 <&clkc CLKID_SD_EMMC_A_CLK0>,
-		 <&clkc CLKID_FCLK_DIV2>;
-	clock-names = "core", "clkin0", "clkin1";
-	resets = <&reset RESET_SD_EMMC_A>;
-};
-
-&sd_emmc_b {
-	clocks = <&clkc CLKID_SD_EMMC_B>,
-		 <&clkc CLKID_SD_EMMC_B_CLK0>,
-		 <&clkc CLKID_FCLK_DIV2>;
-	clock-names = "core", "clkin0", "clkin1";
-	resets = <&reset RESET_SD_EMMC_B>;
-};
-
-&sd_emmc_c {
-	clocks = <&clkc CLKID_SD_EMMC_C>,
-		 <&clkc CLKID_SD_EMMC_C_CLK0>,
-		 <&clkc CLKID_FCLK_DIV2>;
-	clock-names = "core", "clkin0", "clkin1";
-	resets = <&reset RESET_SD_EMMC_C>;
-};
-
-&simplefb_hdmi {
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
-		 <&clkc CLKID_GCLK_VENCI_INT0>;
-};
-
-&spicc {
-	clocks = <&clkc CLKID_SPICC>;
-	clock-names = "core";
-	resets = <&reset RESET_PERIPHS_SPICC>;
-	num-cs = <1>;
-};
-
-&spifc {
-	clocks = <&clkc CLKID_SPI>;
-};
-
-&uart_A {
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_AO {
-	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_AO_B {
-	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_B {
-	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_C {
-	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&vpu {
-	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
-	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
-};
-
-&vdec {
-	compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
-	clocks = <&clkc CLKID_DOS_PARSER>,
-		 <&clkc CLKID_DOS>,
-		 <&clkc CLKID_VDEC_1>,
-		 <&clkc CLKID_VDEC_HEVC>;
-	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
-	resets = <&reset RESET_PARSER>;
-	reset-names = "esparser";
-};
diff --git a/arch/arm/dts/meson-gxm-gt1-ultimate.dts b/arch/arm/dts/meson-gxm-gt1-ultimate.dts
deleted file mode 100644
index 2c267884cc..0000000000
--- a/arch/arm/dts/meson-gxm-gt1-ultimate.dts
+++ /dev/null
@@ -1,91 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxm.dtsi"
-#include "meson-gx-p23x-q20x.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm";
-	model = "Beelink GT1 Ultimate";
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-white {
-			color = <LED_COLOR_ID_WHITE>;
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			panic-indicator;
-		};
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1710000>;
-
-		button-function {
-			label = "update";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <10000>;
-		};
-	};
-};
-
-&ethmac {
-	pinctrl-0 = <&eth_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&external_phy>;
-	amlogic,tx-delay-ns = <2>;
-	phy-mode = "rgmii";
-};
-
-&external_mdio {
-	external_phy: ethernet-phy@0 {
-		/* Realtek RTL8211F (0x001cc916) */
-		reg = <0>;
-		max-speed = <1000>;
-
-		reset-assert-us = <10000>;
-		reset-deassert-us = <80000>;
-		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
-
-		interrupt-parent = <&gpio_intc>;
-		/* MAC_INTR on GPIOZ_15 */
-		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-};
-
-&sd_emmc_a {
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
-		max-speed = <2000000>;
-		clocks = <&wifi32k>;
-		clock-names = "lpo";
-	};
-};
diff --git a/arch/arm/dts/meson-gxm-khadas-vim2.dts b/arch/arm/dts/meson-gxm-khadas-vim2.dts
deleted file mode 100644
index 74897a1548..0000000000
--- a/arch/arm/dts/meson-gxm-khadas-vim2.dts
+++ /dev/null
@@ -1,424 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
- * Copyright (c) 2017 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxm.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
-	compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm";
-	model = "Khadas VIM2";
-
-	aliases {
-		serial0 = &uart_AO;
-		serial2 = &uart_AO_B;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1710000>;
-
-		button-function {
-			label = "Function";
-			linux,code = <KEY_FN>;
-			press-threshold-microvolt = <10000>;
-		};
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	gpio_fan: gpio-fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH
-			 &gpio GPIODV_15 GPIO_ACTIVE_HIGH>;
-		/* Dummy RPM values since fan is optional */
-		gpio-fan,speed-map =
-				<0 0>,
-				<1 1>,
-				<2 2>,
-				<3 3>;
-		#cooling-cells = <2>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		power-button {
-			label = "power";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
-		};
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "vim:red:power";
-			pwms = <&pwm_AO_ab 1 7812500 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
-		clocks = <&wifi32k>;
-		clock-names = "ext_clock";
-	};
-
-	hdmi_5v: regulator-hdmi-5v {
-		compatible = "regulator-fixed";
-
-		regulator-name = "HDMI_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vddio_boot: regulator-vddio_boot {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_BOOT";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vddao_3v3: regulator-vddao_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	wifi32k: wifi32k {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
-	};
-
-	sound {
-		compatible = "amlogic,gx-sound-card";
-		model = "KHADAS-VIM2";
-		assigned-clocks = <&clkc CLKID_MPLL0>,
-				  <&clkc CLKID_MPLL1>,
-				  <&clkc CLKID_MPLL2>;
-		assigned-clock-parents = <0>, <0>, <0>;
-		assigned-clock-rates = <294912000>,
-				       <270950400>,
-				       <393216000>;
-		status = "okay";
-
-		dai-link-0 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
-		};
-
-		dai-link-1 {
-			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
-			dai-format = "i2s";
-			mclk-fs = <256>;
-
-			codec-0 {
-				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
-			};
-		};
-
-		dai-link-2 {
-			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
-
-			codec-0 {
-				sound-dai = <&hdmi_tx>;
-			};
-		};
-	};
-};
-
-&aiu {
-	status = "okay";
-};
-
-&cec_AO {
-	status = "okay";
-	pinctrl-0 = <&ao_cec_pins>;
-	pinctrl-names = "default";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&cpu_cooling_maps {
-	map0 {
-		cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
-	};
-
-	map1 {
-		cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
-				 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-	};
-};
-
-&ethmac {
-	pinctrl-0 = <&eth_pins>;
-	pinctrl-names = "default";
-
-	/* Select external PHY by default */
-	phy-handle = <&external_phy>;
-
-	amlogic,tx-delay-ns = <2>;
-
-	/* External PHY is in RGMII */
-	phy-mode = "rgmii";
-
-	status = "okay";
-};
-
-&external_mdio {
-	external_phy: ethernet-phy@0 {
-		/* Realtek RTL8211F (0x001cc916) */
-		reg = <0>;
-
-		reset-assert-us = <10000>;
-		reset-deassert-us = <80000>;
-		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
-
-		interrupt-parent = <&gpio_intc>;
-		/* MAC_INTR on GPIOZ_15 */
-		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&hdmi_tx {
-	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
-	pinctrl-names = "default";
-	hdmi-supply = <&hdmi_5v>;
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&i2c_A {
-	status = "okay";
-	pinctrl-0 = <&i2c_a_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c_B {
-	status = "okay";
-	pinctrl-0 = <&i2c_b_pins>;
-	pinctrl-names = "default";
-
-	rtc: rtc@51 {
-		status = "okay";
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-output-names = "xin32k";
-	};
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-	linux,rc-map-name = "rc-khadas";
-};
-
-&pwm_AO_ab {
-	status = "okay";
-	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
-&sd_emmc_a {
-	status = "okay";
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-1 = <&sdio_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <100000000>;
-
-	non-removable;
-	disable-wp;
-
-	/* WiFi firmware requires power to be kept while in suspend */
-	keep-power-in-suspend;
-
-	mmc-pwrseq = <&sdio_pwrseq>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-/* SD card */
-&sd_emmc_b {
-	status = "okay";
-	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-1 = <&sdcard_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-	disable-wp;
-
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-/* eMMC */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	max-frequency = <200000000>;
-	non-removable;
-	disable-wp;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vddio_boot>;
-};
-
-/*
- * EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe
- * Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled
- */
-&spifc {
-	status = "disabled";
-	pinctrl-0 = <&nor_pins>;
-	pinctrl-names = "default";
-
-	w25q32: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "winbond,w25q16", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-	};
-};
-
-/* This one is connected to the Bluetooth module */
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
-		max-speed = <2000000>;
-		clocks = <&wifi32k>;
-		clock-names = "lpo";
-	};
-};
-
-/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
-&uart_AO_B {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_b_pins>;
-	pinctrl-names = "default";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao18>;
-};
-
-&usb {
-	status = "okay";
-	dr_mode = "peripheral";
-};
diff --git a/arch/arm/dts/meson-gxm-s912-libretech-pc.dts b/arch/arm/dts/meson-gxm-s912-libretech-pc.dts
deleted file mode 100644
index 444c249863..0000000000
--- a/arch/arm/dts/meson-gxm-s912-libretech-pc.dts
+++ /dev/null
@@ -1,62 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 BayLibre SAS. All rights reserved.
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxm.dtsi"
-#include "meson-gx-libretech-pc.dtsi"
-
-/ {
-	compatible = "libretech,aml-s912-pc", "amlogic,s912",
-		     "amlogic,meson-gxm";
-	model = "Libre Computer AML-S912-PC";
-
-	typec2_vbus: regulator-typec2_vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "TYPEC2_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v>;
-
-		gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&pinctrl_periphs {
-	/*
-	 * Make sure the irq pin of the TYPE C controller is not driven
-	 * by the SoC.
-	 */
-	fusb302_irq_pins: fusb302_irq {
-		mux {
-			groups = "GPIODV_0";
-			function = "gpio_periphs";
-			bias-pull-up;
-			output-disable;
-		};
-	};
-};
-
-&i2c_C {
-	fusb302@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-
-		pinctrl-0 = <&fusb302_irq_pins>;
-		pinctrl-names = "default";
-		interrupt-parent = <&gpio_intc>;
-		interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
-
-		vbus-supply = <&typec2_vbus>;
-
-		status = "okay";
-	};
-};
-
-&usb2_phy2 {
-	phy-supply = <&typec2_vbus>;
-};
diff --git a/arch/arm/dts/meson-gxm-wetek-core2.dts b/arch/arm/dts/meson-gxm-wetek-core2.dts
deleted file mode 100644
index f8c40340b9..0000000000
--- a/arch/arm/dts/meson-gxm-wetek-core2.dts
+++ /dev/null
@@ -1,85 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
- */
-
-/dts-v1/;
-
-#include "meson-gxm.dtsi"
-#include "meson-gx-p23x-q20x.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm";
-	model = "WeTek Core 2";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-blue {
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1710000>;
-
-		button-update {
-			label = "update";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <10000>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		button-power {
-			label = "power";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-/* Disabled as Realtek RTL8152 USB provides Ethernet */
-&ethmac {
-	status = "disabled";
-};
-
-&internal_phy {
-	status = "disabled";
-};
-
-&ir {
-	linux,rc-map-name = "rc-wetek-play2";
-};
-
-/* This is connected to the Bluetooth module: */
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
-		max-speed = <2000000>;
-		clocks = <&wifi32k>;
-		clock-names = "lpo";
-	};
-};
diff --git a/arch/arm/dts/meson-gxm.dtsi b/arch/arm/dts/meson-gxm.dtsi
deleted file mode 100644
index 411cc312fc..0000000000
--- a/arch/arm/dts/meson-gxm.dtsi
+++ /dev/null
@@ -1,216 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Endless Computers, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#include "meson-gxl.dtsi"
-
-/ {
-	compatible = "amlogic,meson-gxm";
-
-	cpus {
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-				core2 {
-					cpu = <&cpu2>;
-				};
-				core3 {
-					cpu = <&cpu3>;
-				};
-			};
-
-			cluster1 {
-				core0 {
-					cpu = <&cpu4>;
-				};
-				core1 {
-					cpu = <&cpu5>;
-				};
-				core2 {
-					cpu = <&cpu6>;
-				};
-				core3 {
-					cpu = <&cpu7>;
-				};
-			};
-		};
-
-		cpu0: cpu@0 {
-			capacity-dmips-mhz = <1024>;
-		};
-
-		cpu1: cpu@1 {
-			capacity-dmips-mhz = <1024>;
-		};
-
-		cpu2: cpu@2 {
-			capacity-dmips-mhz = <1024>;
-		};
-
-		cpu3: cpu@3 {
-			capacity-dmips-mhz = <1024>;
-		};
-
-		cpu4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 1>;
-			#cooling-cells = <2>;
-		};
-
-		cpu5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x101>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 1>;
-			#cooling-cells = <2>;
-		};
-
-		cpu6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x102>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 1>;
-			#cooling-cells = <2>;
-		};
-
-		cpu7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x103>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
-			clocks = <&scpi_dvfs 1>;
-			#cooling-cells = <2>;
-		};
-	};
-
-	gpu_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp-125000000 {
-			opp-hz = /bits/ 64 <125000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-285714285 {
-			opp-hz = /bits/ 64 <285714285>;
-			opp-microvolt = <950000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-666666666 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <950000>;
-		};
-	};
-};
-
-&apb {
-	usb2_phy2: phy@78040 {
-		compatible = "amlogic,meson-gxl-usb2-phy";
-		#phy-cells = <0>;
-		reg = <0x0 0x78040 0x0 0x20>;
-		clocks = <&clkc CLKID_USB>;
-		clock-names = "phy";
-		resets = <&reset RESET_USB_OTG>;
-		reset-names = "phy";
-		status = "okay";
-	};
-
-	mali: gpu@c0000 {
-		compatible = "amlogic,meson-gxm-mali", "arm,mali-t820";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "job", "mmu", "gpu";
-		clocks = <&clkc CLKID_MALI>;
-		resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>;
-		operating-points-v2 = <&gpu_opp_table>;
-	};
-};
-
-&clkc_AO {
-	compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
-};
-
-&cpu_cooling_maps {
-	map0 {
-		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-	};
-
-	map1 {
-		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-	};
-};
-
-&saradc {
-	compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
-};
-
-&scpi_dvfs {
-	clock-indices = <0 1>;
-	clock-output-names = "vbig", "vlittle";
-};
-
-&vpu {
-	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
-};
-
-&hdmi_tx {
-	compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
-};
-
-&usb {
-	compatible = "amlogic,meson-gxm-usb-ctrl";
-
-	phy-names = "usb2-phy0", "usb2-phy1", "usb2-phy2";
-	phys = <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>;
-};
-
-&vdec {
-	compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec";
-};
diff --git a/include/dt-bindings/gpio/meson-axg-gpio.h b/include/dt-bindings/gpio/meson-axg-gpio.h
deleted file mode 100644
index 25bb1fffa9..0000000000
--- a/include/dt-bindings/gpio/meson-axg-gpio.h
+++ /dev/null
@@ -1,116 +0,0 @@ 
-/*
- * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
- * Author: Xingyu Chen <xingyu.chen@amlogic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _DT_BINDINGS_MESON_AXG_GPIO_H
-#define _DT_BINDINGS_MESON_AXG_GPIO_H
-
-/* First GPIO chip */
-#define GPIOAO_0	0
-#define GPIOAO_1	1
-#define GPIOAO_2	2
-#define GPIOAO_3	3
-#define GPIOAO_4	4
-#define GPIOAO_5	5
-#define GPIOAO_6	6
-#define GPIOAO_7	7
-#define GPIOAO_8	8
-#define GPIOAO_9	9
-#define GPIOAO_10	10
-#define GPIOAO_11	11
-#define GPIOAO_12	12
-#define GPIOAO_13	13
-#define GPIO_TEST_N 14
-
-/* Second GPIO chip */
-#define GPIOZ_0		0
-#define GPIOZ_1		1
-#define GPIOZ_2		2
-#define GPIOZ_3		3
-#define GPIOZ_4		4
-#define GPIOZ_5		5
-#define GPIOZ_6		6
-#define GPIOZ_7		7
-#define GPIOZ_8		8
-#define GPIOZ_9		9
-#define GPIOZ_10	10
-#define BOOT_0		11
-#define BOOT_1		12
-#define BOOT_2		13
-#define BOOT_3		14
-#define BOOT_4		15
-#define BOOT_5		16
-#define BOOT_6		17
-#define BOOT_7		18
-#define BOOT_8		19
-#define BOOT_9		20
-#define BOOT_10		21
-#define BOOT_11		22
-#define BOOT_12		23
-#define BOOT_13		24
-#define BOOT_14		25
-#define GPIOA_0	    26
-#define GPIOA_1		27
-#define GPIOA_2		28
-#define GPIOA_3		29
-#define GPIOA_4		30
-#define GPIOA_5		31
-#define GPIOA_6		32
-#define GPIOA_7		33
-#define GPIOA_8		34
-#define GPIOA_9		35
-#define GPIOA_10	36
-#define GPIOA_11	37
-#define GPIOA_12	38
-#define GPIOA_13	39
-#define GPIOA_14	40
-#define GPIOA_15	41
-#define GPIOA_16	42
-#define GPIOA_17	43
-#define GPIOA_18	44
-#define GPIOA_19	45
-#define GPIOA_20	46
-#define GPIOX_0		47
-#define GPIOX_1		48
-#define GPIOX_2		49
-#define GPIOX_3		50
-#define GPIOX_4		51
-#define GPIOX_5		52
-#define GPIOX_6		53
-#define GPIOX_7		54
-#define GPIOX_8		55
-#define GPIOX_9		56
-#define GPIOX_10	57
-#define GPIOX_11	58
-#define GPIOX_12	59
-#define GPIOX_13	60
-#define GPIOX_14	61
-#define GPIOX_15	62
-#define GPIOX_16	63
-#define GPIOX_17	64
-#define GPIOX_18	65
-#define GPIOX_19	66
-#define GPIOX_20	67
-#define GPIOX_21	68
-#define GPIOX_22	69
-#define GPIOY_0		70
-#define GPIOY_1		71
-#define GPIOY_2		72
-#define GPIOY_3		73
-#define GPIOY_4		74
-#define GPIOY_5		75
-#define GPIOY_6		76
-#define GPIOY_7		77
-#define GPIOY_8		78
-#define GPIOY_9		79
-#define GPIOY_10	80
-#define GPIOY_11	81
-#define GPIOY_12	82
-#define GPIOY_13	83
-#define GPIOY_14	84
-#define GPIOY_15	85
-
-#endif /* _DT_BINDINGS_MESON_AXG_GPIO_H */
diff --git a/include/dt-bindings/gpio/meson-gxbb-gpio.h b/include/dt-bindings/gpio/meson-gxbb-gpio.h
deleted file mode 100644
index 489c75b276..0000000000
--- a/include/dt-bindings/gpio/meson-gxbb-gpio.h
+++ /dev/null
@@ -1,148 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIO definitions for Amlogic Meson GXBB SoCs
- *
- * Copyright (C) 2016 Endless Mobile, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_GXBB_GPIO_H
-#define _DT_BINDINGS_MESON_GXBB_GPIO_H
-
-#define	GPIOAO_0	0
-#define	GPIOAO_1	1
-#define	GPIOAO_2	2
-#define	GPIOAO_3	3
-#define	GPIOAO_4	4
-#define	GPIOAO_5	5
-#define	GPIOAO_6	6
-#define	GPIOAO_7	7
-#define	GPIOAO_8	8
-#define	GPIOAO_9	9
-#define	GPIOAO_10	10
-#define	GPIOAO_11	11
-#define	GPIOAO_12	12
-#define	GPIOAO_13	13
-#define	GPIO_TEST_N	14
-
-#define	GPIOZ_0		0
-#define	GPIOZ_1		1
-#define	GPIOZ_2		2
-#define	GPIOZ_3		3
-#define	GPIOZ_4		4
-#define	GPIOZ_5		5
-#define	GPIOZ_6		6
-#define	GPIOZ_7		7
-#define	GPIOZ_8		8
-#define	GPIOZ_9		9
-#define	GPIOZ_10	10
-#define	GPIOZ_11	11
-#define	GPIOZ_12	12
-#define	GPIOZ_13	13
-#define	GPIOZ_14	14
-#define	GPIOZ_15	15
-#define	GPIOH_0		16
-#define	GPIOH_1		17
-#define	GPIOH_2		18
-#define	GPIOH_3		19
-#define	BOOT_0		20
-#define	BOOT_1		21
-#define	BOOT_2		22
-#define	BOOT_3		23
-#define	BOOT_4		24
-#define	BOOT_5		25
-#define	BOOT_6		26
-#define	BOOT_7		27
-#define	BOOT_8		28
-#define	BOOT_9		29
-#define	BOOT_10		30
-#define	BOOT_11		31
-#define	BOOT_12		32
-#define	BOOT_13		33
-#define	BOOT_14		34
-#define	BOOT_15		35
-#define	BOOT_16		36
-#define	BOOT_17		37
-#define	CARD_0		38
-#define	CARD_1		39
-#define	CARD_2		40
-#define	CARD_3		41
-#define	CARD_4		42
-#define	CARD_5		43
-#define	CARD_6		44
-#define	GPIODV_0	45
-#define	GPIODV_1	46
-#define	GPIODV_2	47
-#define	GPIODV_3	48
-#define	GPIODV_4	49
-#define	GPIODV_5	50
-#define	GPIODV_6	51
-#define	GPIODV_7	52
-#define	GPIODV_8	53
-#define	GPIODV_9	54
-#define	GPIODV_10	55
-#define	GPIODV_11	56
-#define	GPIODV_12	57
-#define	GPIODV_13	58
-#define	GPIODV_14	59
-#define	GPIODV_15	60
-#define	GPIODV_16	61
-#define	GPIODV_17	62
-#define	GPIODV_18	63
-#define	GPIODV_19	64
-#define	GPIODV_20	65
-#define	GPIODV_21	66
-#define	GPIODV_22	67
-#define	GPIODV_23	68
-#define	GPIODV_24	69
-#define	GPIODV_25	70
-#define	GPIODV_26	71
-#define	GPIODV_27	72
-#define	GPIODV_28	73
-#define	GPIODV_29	74
-#define	GPIOY_0		75
-#define	GPIOY_1		76
-#define	GPIOY_2		77
-#define	GPIOY_3		78
-#define	GPIOY_4		79
-#define	GPIOY_5		80
-#define	GPIOY_6		81
-#define	GPIOY_7		82
-#define	GPIOY_8		83
-#define	GPIOY_9		84
-#define	GPIOY_10	85
-#define	GPIOY_11	86
-#define	GPIOY_12	87
-#define	GPIOY_13	88
-#define	GPIOY_14	89
-#define	GPIOY_15	90
-#define	GPIOY_16	91
-#define	GPIOX_0		92
-#define	GPIOX_1		93
-#define	GPIOX_2		94
-#define	GPIOX_3		95
-#define	GPIOX_4		96
-#define	GPIOX_5		97
-#define	GPIOX_6		98
-#define	GPIOX_7		99
-#define	GPIOX_8		100
-#define	GPIOX_9		101
-#define	GPIOX_10	102
-#define	GPIOX_11	103
-#define	GPIOX_12	104
-#define	GPIOX_13	105
-#define	GPIOX_14	106
-#define	GPIOX_15	107
-#define	GPIOX_16	108
-#define	GPIOX_17	109
-#define	GPIOX_18	110
-#define	GPIOX_19	111
-#define	GPIOX_20	112
-#define	GPIOX_21	113
-#define	GPIOX_22	114
-#define	GPIOCLK_0	115
-#define	GPIOCLK_1	116
-#define	GPIOCLK_2	117
-#define	GPIOCLK_3	118
-
-#endif
diff --git a/include/dt-bindings/gpio/meson-gxl-gpio.h b/include/dt-bindings/gpio/meson-gxl-gpio.h
deleted file mode 100644
index 0a001ae482..0000000000
--- a/include/dt-bindings/gpio/meson-gxl-gpio.h
+++ /dev/null
@@ -1,125 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIO definitions for Amlogic Meson GXL SoCs
- *
- * Copyright (C) 2016 Endless Mobile, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_GXL_GPIO_H
-#define _DT_BINDINGS_MESON_GXL_GPIO_H
-
-#define	GPIOAO_0	0
-#define	GPIOAO_1	1
-#define	GPIOAO_2	2
-#define	GPIOAO_3	3
-#define	GPIOAO_4	4
-#define	GPIOAO_5	5
-#define	GPIOAO_6	6
-#define	GPIOAO_7	7
-#define	GPIOAO_8	8
-#define	GPIOAO_9	9
-#define	GPIO_TEST_N	10
-
-#define	GPIOZ_0		0
-#define	GPIOZ_1		1
-#define	GPIOZ_2		2
-#define	GPIOZ_3		3
-#define	GPIOZ_4		4
-#define	GPIOZ_5		5
-#define	GPIOZ_6		6
-#define	GPIOZ_7		7
-#define	GPIOZ_8		8
-#define	GPIOZ_9		9
-#define	GPIOZ_10	10
-#define	GPIOZ_11	11
-#define	GPIOZ_12	12
-#define	GPIOZ_13	13
-#define	GPIOZ_14	14
-#define	GPIOZ_15	15
-#define	GPIOH_0		16
-#define	GPIOH_1		17
-#define	GPIOH_2		18
-#define	GPIOH_3		19
-#define	GPIOH_4		20
-#define	GPIOH_5		21
-#define	GPIOH_6		22
-#define	GPIOH_7		23
-#define	GPIOH_8		24
-#define	GPIOH_9		25
-#define	BOOT_0		26
-#define	BOOT_1		27
-#define	BOOT_2		28
-#define	BOOT_3		29
-#define	BOOT_4		30
-#define	BOOT_5		31
-#define	BOOT_6		32
-#define	BOOT_7		33
-#define	BOOT_8		34
-#define	BOOT_9		35
-#define	BOOT_10		36
-#define	BOOT_11		37
-#define	BOOT_12		38
-#define	BOOT_13		39
-#define	BOOT_14		40
-#define	BOOT_15		41
-#define	CARD_0		42
-#define	CARD_1		43
-#define	CARD_2		44
-#define	CARD_3		45
-#define	CARD_4		46
-#define	CARD_5		47
-#define	CARD_6		48
-#define	GPIODV_0	49
-#define	GPIODV_1	50
-#define	GPIODV_2	51
-#define	GPIODV_3	52
-#define	GPIODV_4	53
-#define	GPIODV_5	54
-#define	GPIODV_6	55
-#define	GPIODV_7	56
-#define	GPIODV_8	57
-#define	GPIODV_9	58
-#define	GPIODV_10	59
-#define	GPIODV_11	60
-#define	GPIODV_12	61
-#define	GPIODV_13	62
-#define	GPIODV_14	63
-#define	GPIODV_15	64
-#define	GPIODV_16	65
-#define	GPIODV_17	66
-#define	GPIODV_18	67
-#define	GPIODV_19	68
-#define	GPIODV_20	69
-#define	GPIODV_21	70
-#define	GPIODV_22	71
-#define	GPIODV_23	72
-#define	GPIODV_24	73
-#define	GPIODV_25	74
-#define	GPIODV_26	75
-#define	GPIODV_27	76
-#define	GPIODV_28	77
-#define	GPIODV_29	78
-#define	GPIOX_0		79
-#define	GPIOX_1		80
-#define	GPIOX_2		81
-#define	GPIOX_3		82
-#define	GPIOX_4		83
-#define	GPIOX_5		84
-#define	GPIOX_6		85
-#define	GPIOX_7		86
-#define	GPIOX_8		87
-#define	GPIOX_9		88
-#define	GPIOX_10	89
-#define	GPIOX_11	90
-#define	GPIOX_12	91
-#define	GPIOX_13	92
-#define	GPIOX_14	93
-#define	GPIOX_15	94
-#define	GPIOX_16	95
-#define	GPIOX_17	96
-#define	GPIOX_18	97
-#define	GPIOCLK_0	98
-#define	GPIOCLK_1	99
-
-#endif
diff --git a/include/dt-bindings/power/meson-axg-power.h b/include/dt-bindings/power/meson-axg-power.h
deleted file mode 100644
index e5243884b2..0000000000
--- a/include/dt-bindings/power/meson-axg-power.h
+++ /dev/null
@@ -1,14 +0,0 @@ 
-/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
-/*
- * Copyright (c) 2020 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_AXG_POWER_H
-#define _DT_BINDINGS_MESON_AXG_POWER_H
-
-#define PWRC_AXG_VPU_ID			0
-#define PWRC_AXG_ETHERNET_MEM_ID	1
-#define PWRC_AXG_AUDIO_ID		2
-
-#endif
diff --git a/include/dt-bindings/power/meson-gxbb-power.h b/include/dt-bindings/power/meson-gxbb-power.h
deleted file mode 100644
index 1262dac696..0000000000
--- a/include/dt-bindings/power/meson-gxbb-power.h
+++ /dev/null
@@ -1,13 +0,0 @@ 
-/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#ifndef _DT_BINDINGS_MESON_GXBB_POWER_H
-#define _DT_BINDINGS_MESON_GXBB_POWER_H
-
-#define PWRC_GXBB_VPU_ID		0
-#define PWRC_GXBB_ETHERNET_MEM_ID	1
-
-#endif
diff --git a/include/dt-bindings/reset/amlogic,meson-axg-reset.h b/include/dt-bindings/reset/amlogic,meson-axg-reset.h
deleted file mode 100644
index 0f2e0fe45c..0000000000
--- a/include/dt-bindings/reset/amlogic,meson-axg-reset.h
+++ /dev/null
@@ -1,123 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
-/*
- * Copyright (c) 2016 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * Copyright (c) 2017 Amlogic, inc.
- * Author: Yixun Lan <yixun.lan@amlogic.com>
- *
- */
-
-#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H
-#define _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H
-
-/*	RESET0					*/
-#define RESET_HIU			0
-#define RESET_PCIE_A			1
-#define RESET_PCIE_B			2
-#define RESET_DDR_TOP			3
-/*					4	*/
-#define RESET_VIU			5
-#define RESET_PCIE_PHY			6
-#define RESET_PCIE_APB			7
-/*					8	*/
-/*					9	*/
-#define RESET_VENC			10
-#define RESET_ASSIST			11
-/*					12	*/
-#define RESET_VCBUS			13
-/*					14	*/
-/*					15	*/
-#define RESET_GIC			16
-#define RESET_CAPB3_DECODE		17
-/*					18-21	*/
-#define RESET_SYS_CPU_CAPB3		22
-#define RESET_CBUS_CAPB3		23
-#define RESET_AHB_CNTL			24
-#define RESET_AHB_DATA			25
-#define RESET_VCBUS_CLK81		26
-#define RESET_MMC			27
-/*					28-31	*/
-/*	RESET1					*/
-/*					32	*/
-/*					33	*/
-#define RESET_USB_OTG			34
-#define RESET_DDR			35
-#define RESET_AO_RESET			36
-/*					37	*/
-#define RESET_AHB_SRAM			38
-/*					39	*/
-/*					40	*/
-#define RESET_DMA			41
-#define RESET_ISA			42
-#define RESET_ETHERNET			43
-/*					44	*/
-#define RESET_SD_EMMC_B			45
-#define RESET_SD_EMMC_C			46
-#define RESET_ROM_BOOT			47
-#define RESET_SYS_CPU_0			48
-#define RESET_SYS_CPU_1			49
-#define RESET_SYS_CPU_2			50
-#define RESET_SYS_CPU_3			51
-#define RESET_SYS_CPU_CORE_0		52
-#define RESET_SYS_CPU_CORE_1		53
-#define RESET_SYS_CPU_CORE_2		54
-#define RESET_SYS_CPU_CORE_3		55
-#define RESET_SYS_PLL_DIV		56
-#define RESET_SYS_CPU_AXI		57
-#define RESET_SYS_CPU_L2		58
-#define RESET_SYS_CPU_P			59
-#define RESET_SYS_CPU_MBIST		60
-/*					61-63	*/
-/*	RESET2					*/
-/*					64	*/
-/*					65	*/
-#define RESET_AUDIO			66
-/*					67	*/
-#define RESET_MIPI_HOST			68
-#define RESET_AUDIO_LOCKER		69
-#define RESET_GE2D			70
-/*					71-76	*/
-#define RESET_AO_CPU_RESET		77
-/*					78-95	*/
-/*	RESET3					*/
-#define RESET_RING_OSCILLATOR		96
-/*					97-127	*/
-/*	RESET4					*/
-/*					128	*/
-/*					129	*/
-#define RESET_MIPI_PHY			130
-/*					131-140	*/
-#define RESET_VENCL			141
-#define RESET_I2C_MASTER_2		142
-#define RESET_I2C_MASTER_1		143
-/*					144-159	*/
-/*	RESET5					*/
-/*					160-191	*/
-/*	RESET6					*/
-#define RESET_PERIPHS_GENERAL		192
-#define RESET_PERIPHS_SPICC		193
-/*					194	*/
-/*					195	*/
-#define RESET_PERIPHS_I2C_MASTER_0	196
-/*					197-200	*/
-#define RESET_PERIPHS_UART_0		201
-#define RESET_PERIPHS_UART_1		202
-/*					203-204	*/
-#define RESET_PERIPHS_SPI_0		205
-#define RESET_PERIPHS_I2C_MASTER_3	206
-/*					207-223	*/
-/*	RESET7					*/
-#define RESET_USB_DDR_0			224
-#define RESET_USB_DDR_1			225
-#define RESET_USB_DDR_2			226
-#define RESET_USB_DDR_3			227
-/*					228	*/
-#define RESET_DEVICE_MMC_ARB		229
-/*					230	*/
-#define RESET_VID_LOCK			231
-#define RESET_A9_DMC_PIPEL		232
-#define RESET_DMC_VPU_PIPEL		233
-/*					234-255	*/
-
-#endif
diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
deleted file mode 100644
index 883bfd3bcb..0000000000
--- a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
+++ /dev/null
@@ -1,161 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
-/*
- * Copyright (c) 2016 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
-#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
-
-/*	RESET0					*/
-#define RESET_HIU			0
-/*					1	*/
-#define RESET_DOS_RESET			2
-#define RESET_DDR_TOP			3
-#define RESET_DCU_RESET			4
-#define RESET_VIU			5
-#define RESET_AIU			6
-#define RESET_VID_PLL_DIV		7
-/*					8	*/
-#define RESET_PMUX			9
-#define RESET_VENC			10
-#define RESET_ASSIST			11
-#define RESET_AFIFO2			12
-#define RESET_VCBUS			13
-/*					14	*/
-/*					15	*/
-#define RESET_GIC			16
-#define RESET_CAPB3_DECODE		17
-#define RESET_NAND_CAPB3		18
-#define RESET_HDMITX_CAPB3		19
-#define RESET_MALI_CAPB3		20
-#define RESET_DOS_CAPB3			21
-#define RESET_SYS_CPU_CAPB3		22
-#define RESET_CBUS_CAPB3		23
-#define RESET_AHB_CNTL			24
-#define RESET_AHB_DATA			25
-#define RESET_VCBUS_CLK81		26
-#define RESET_MMC			27
-#define RESET_MIPI_0			28
-#define RESET_MIPI_1			29
-#define RESET_MIPI_2			30
-#define RESET_MIPI_3			31
-/*	RESET1					*/
-#define RESET_CPPM			32
-#define RESET_DEMUX			33
-#define RESET_USB_OTG			34
-#define RESET_DDR			35
-#define RESET_AO_RESET			36
-#define RESET_BT656			37
-#define RESET_AHB_SRAM			38
-/*					39	*/
-#define RESET_PARSER			40
-#define RESET_BLKMV			41
-#define RESET_ISA			42
-#define RESET_ETHERNET			43
-#define RESET_SD_EMMC_A			44
-#define RESET_SD_EMMC_B			45
-#define RESET_SD_EMMC_C			46
-#define RESET_ROM_BOOT			47
-#define RESET_SYS_CPU_0			48
-#define RESET_SYS_CPU_1			49
-#define RESET_SYS_CPU_2			50
-#define RESET_SYS_CPU_3			51
-#define RESET_SYS_CPU_CORE_0		52
-#define RESET_SYS_CPU_CORE_1		53
-#define RESET_SYS_CPU_CORE_2		54
-#define RESET_SYS_CPU_CORE_3		55
-#define RESET_SYS_PLL_DIV		56
-#define RESET_SYS_CPU_AXI		57
-#define RESET_SYS_CPU_L2		58
-#define RESET_SYS_CPU_P			59
-#define RESET_SYS_CPU_MBIST		60
-#define RESET_ACODEC			61
-/*					62	*/
-/*					63	*/
-/*	RESET2					*/
-#define RESET_VD_RMEM			64
-#define RESET_AUDIN			65
-#define RESET_HDMI_TX			66
-/*					67	*/
-/*					68	*/
-/*					69	*/
-#define RESET_GE2D			70
-#define RESET_PARSER_REG		71
-#define RESET_PARSER_FETCH		72
-#define RESET_PARSER_CTL		73
-#define RESET_PARSER_TOP		74
-/*					75	*/
-/*					76	*/
-#define RESET_AO_CPU_RESET		77
-#define RESET_MALI			78
-#define RESET_HDMI_SYSTEM_RESET		79
-/*					80-95	*/
-/*	RESET3					*/
-#define RESET_RING_OSCILLATOR		96
-#define RESET_SYS_CPU			97
-#define RESET_EFUSE			98
-#define RESET_SYS_CPU_BVCI		99
-#define RESET_AIFIFO			100
-#define RESET_TVFE			101
-#define RESET_AHB_BRIDGE_CNTL		102
-/*					103	*/
-#define RESET_AUDIO_DAC			104
-#define RESET_DEMUX_TOP			105
-#define RESET_DEMUX_DES			106
-#define RESET_DEMUX_S2P_0		107
-#define RESET_DEMUX_S2P_1		108
-#define RESET_DEMUX_RESET_0		109
-#define RESET_DEMUX_RESET_1		110
-#define RESET_DEMUX_RESET_2		111
-/*					112-127	*/
-/*	RESET4					*/
-/*					128	*/
-/*					129	*/
-/*					130	*/
-/*					131	*/
-#define RESET_DVIN_RESET		132
-#define RESET_RDMA			133
-#define RESET_VENCI			134
-#define RESET_VENCP			135
-/*					136	*/
-#define RESET_VDAC			137
-#define RESET_RTC			138
-/*					139	*/
-#define RESET_VDI6			140
-#define RESET_VENCL			141
-#define RESET_I2C_MASTER_2		142
-#define RESET_I2C_MASTER_1		143
-/*					144-159	*/
-/*	RESET5					*/
-/*					160-191	*/
-/*	RESET6					*/
-#define RESET_PERIPHS_GENERAL		192
-#define RESET_PERIPHS_SPICC		193
-#define RESET_PERIPHS_SMART_CARD	194
-#define RESET_PERIPHS_SAR_ADC		195
-#define RESET_PERIPHS_I2C_MASTER_0	196
-#define RESET_SANA			197
-/*					198	*/
-#define RESET_PERIPHS_STREAM_INTERFACE	199
-#define RESET_PERIPHS_SDIO		200
-#define RESET_PERIPHS_UART_0		201
-#define RESET_PERIPHS_UART_1_2		202
-#define RESET_PERIPHS_ASYNC_0		203
-#define RESET_PERIPHS_ASYNC_1		204
-#define RESET_PERIPHS_SPI_0		205
-#define RESET_PERIPHS_SDHC		206
-#define RESET_UART_SLIP			207
-/*					208-223	*/
-/*	RESET7					*/
-#define RESET_USB_DDR_0			224
-#define RESET_USB_DDR_1			225
-#define RESET_USB_DDR_2			226
-#define RESET_USB_DDR_3			227
-/*					228	*/
-#define RESET_DEVICE_MMC_ARB		229
-/*					230	*/
-#define RESET_VID_LOCK			231
-#define RESET_A9_DMC_PIPEL		232
-/*					233-255	*/
-
-#endif
diff --git a/include/dt-bindings/sound/meson-aiu.h b/include/dt-bindings/sound/meson-aiu.h
deleted file mode 100644
index 1051b8af29..0000000000
--- a/include/dt-bindings/sound/meson-aiu.h
+++ /dev/null
@@ -1,18 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DT_MESON_AIU_H
-#define __DT_MESON_AIU_H
-
-#define AIU_CPU			0
-#define AIU_HDMI		1
-#define AIU_ACODEC		2
-
-#define CPU_I2S_FIFO		0
-#define CPU_SPDIF_FIFO		1
-#define CPU_I2S_ENCODER		2
-#define CPU_SPDIF_ENCODER	3
-
-#define CTRL_I2S		0
-#define CTRL_PCM		1
-#define CTRL_OUT		2
-
-#endif /* __DT_MESON_AIU_H */