@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-beaglev-fire.dtb
dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb
dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
new file mode 100644
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/ {
+ fabric_clk3: fabric-clk3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ fabric_clk1: fabric-clk1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ fabric-bus@40000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>, /* FIC3-FAB */
+ <0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>, /* FIC0, LO */
+ <0x0 0xe0000000 0x0 0xe0000000 0x0 0x20000000>, /* FIC1, LO */
+ <0x20 0x0 0x20 0x0 0x10 0x0>, /* FIC0,HI */
+ <0x30 0x0 0x30 0x0 0x10 0x0>; /* FIC1,HI */
+
+ cape_gpios_p8: gpio@41100000 {
+ compatible = "microchip,coregpio-rtl-v3";
+ reg = <0x0 0x41100000 0x0 0x1000>;
+ clocks = <&fabric_clk3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <16>;
+ gpio-line-names = "P8_PIN31", "P8_PIN32", "P8_PIN33", "P8_PIN34",
+ "P8_PIN35", "P8_PIN36", "P8_PIN37", "P8_PIN38",
+ "P8_PIN39", "P8_PIN40", "P8_PIN41", "P8_PIN42",
+ "P8_PIN43", "P8_PIN44", "P8_PIN45", "P8_PIN46";
+ };
+
+ cape_gpios_p9: gpio@41200000 {
+ compatible = "microchip,coregpio-rtl-v3";
+ reg = <0x0 0x41200000 0x0 0x1000>;
+ clocks = <&fabric_clk3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <20>;
+ gpio-line-names = "P9_PIN11", "P9_PIN12", "P9_PIN13", "P9_PIN14",
+ "P9_PIN15", "P9_PIN16", "P9_PIN17", "P9_PIN18",
+ "P9_PIN21", "P9_PIN22", "P9_PIN23", "P9_PIN24",
+ "P9_PIN25", "P9_PIN26", "P9_PIN27", "P9_PIN28",
+ "P9_PIN29", "P9_PIN31", "P9_PIN41", "P9_PIN42";
+ };
+
+ hsi_gpios: gpio@44000000 {
+ compatible = "microchip,coregpio-rtl-v3";
+ reg = <0x0 0x44000000 0x0 0x1000>;
+ clocks = <&fabric_clk3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <20>;
+ gpio-line-names = "B0_HSIO70N", "B0_HSIO71N", "B0_HSIO83N",
+ "B0_HSIO73N_C2P_CLKN", "B0_HSIO70P", "B0_HSIO71P",
+ "B0_HSIO83P", "B0_HSIO73N_C2P_CLKP", "XCVR1_RX_VALID",
+ "XCVR1_LOCK", "XCVR1_ERROR", "XCVR2_RX_VALID",
+ "XCVR2_LOCK", "XCVR2_ERROR", "XCVR3_RX_VALID",
+ "XCVR3_LOCK", "XCVR3_ERROR", "XCVR_0B_REF_CLK_PLL_LOCK",
+ "XCVR_0C_REF_CLK_PLL_LOCK", "B0_HSIO81N";
+ };
+ };
+
+ fabric-pcie-bus@3000000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>,
+ <0x30 0x0 0x30 0x0 0x10 0x0>;
+
+ pcie: pcie@3000000000 {
+ compatible = "microchip,pcie-host-1.0";
+ #address-cells = <0x3>;
+ #interrupt-cells = <0x1>;
+ #size-cells = <0x2>;
+ device_type = "pci";
+ reg = <0x30 0x0 0x0 0x8000000>,
+ <0x0 0x43000000 0x0 0x10000>;
+ reg-names = "cfg", "apb";
+ bus-range = <0x0 0x7f>;
+ interrupt-parent = <&plic>;
+ interrupts = <119>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ interrupt-map-mask = <0 0 0 7>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>,
+ <&ccc_nw CLK_CCC_PLL0_OUT3>;
+ clock-names = "fic1", "fic3";
+ ranges = <0x43000000 0x0 0x9000000 0x30 0x9000000 0x0 0xf000000>,
+ <0x1000000 0x0 0x8000000 0x30 0x8000000 0x0 0x1000000>,
+ <0x3000000 0x0 0x18000000 0x30 0x18000000 0x0 0x70000000>;
+ msi-parent = <&pcie>;
+ msi-controller;
+ status = "disabled";
+
+ pcie_intc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
+
+ refclk_ccc: cccrefclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+};
+
+&ccc_nw {
+ clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+ <&refclk_ccc>, <&refclk_ccc>;
+ clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+ "dll0_ref", "dll1_ref";
+ status = "okay";
+};
new file mode 100644
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "mpfs.dtsi"
+#include "mpfs-beaglev-fire-fabric.dtsi"
+
+/* Clock frequency (in Hz) of MTIMER */
+#define MTIMER_FREQ 1000000
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "BeagleBoard BeagleV-Fire";
+ compatible = "beagle,beaglev-fire", "microchip,mpfs";
+
+ aliases {
+ serial0 = &mmuart0;
+ serial1 = &mmuart1;
+ serial2 = &mmuart2;
+ serial3 = &mmuart3;
+ serial4 = &mmuart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ timebase-frequency = <MTIMER_FREQ>;
+ };
+
+ ddrc_cache_lo: memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000>;
+ status = "okay";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hss: hss-buffer@103fc00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10 0x3fc00000 0x0 0x400000>;
+ no-map;
+ };
+ };
+
+ imx219_clk: camera-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
+ imx219_vana: fixedregulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "imx219_vana";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ imx219_vdig: fixedregulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "imx219_vdig";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ imx219_vddl: fixedregulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "imx219_vddl";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+};
+
+&gpio2 {
+ interrupts = <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>;
+ ngpios=<32>;
+ gpio-line-names = "P8_PIN3_USER_LED_0", "P8_PIN4_USER_LED_1", "P8_PIN5_USER_LED_2",
+ "P8_PIN6_USER_LED_3", "P8_PIN7_USER_LED_4", "P8_PIN8_USER_LED_5",
+ "P8_PIN9_USER_LED_6", "P8_PIN10_USER_LED_7", "P8_PIN11_USER_LED_8",
+ "P8_PIN12_USER_LED_9", "P8_PIN13_USER_LED_10", "P8_PIN14_USER_LED_11",
+ "P8_PIN15", "P8_PIN16", "P8_PIN17", "P8_PIN18", "P8_PIN19", "P8_PIN20",
+ "P8_PIN21", "P8_PIN22", "P8_PIN23", "P8_PIN24", "P8_PIN25", "P8_PIN26",
+ "P8_PIN27", "P8_PIN28", "P8_PIN29", "P8_PIN30", "M2_W_DISABLE1",
+ "M2_W_DISABLE2", "VIO_ENABLE", "SD_DET";
+ status = "okay";
+
+ vio-enable-hog {
+ gpio-hog;
+ gpios = <30 30>;
+ output-high;
+ line-name = "VIO_ENABLE";
+ };
+
+ sd-det-hog {
+ gpio-hog;
+ gpios = <31 31>;
+ input;
+ line-name = "SD_DET";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ imx219: sensor@10 {
+ compatible = "sony,imx219";
+ reg = <0x10>;
+ clocks = <&imx219_clk>;
+ VANA-supply = <&imx219_vana>; /* 2.8v */
+ VDIG-supply = <&imx219_vdig>; /* 1.8v */
+ VDDL-supply = <&imx219_vddl>; /* 1.2v */
+
+ port {
+ imx219_0: endpoint {
+ data-lanes = <1 2>;
+ clock-noncontinuous;
+ link-frequencies = /bits/ 64 <456000000>;
+ };
+ };
+ };
+};
+
+&mac0 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&mbox {
+ status = "okay";
+};
+
+&mmc {
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&mmuart0 {
+ status = "okay";
+};
+
+&mmuart1 {
+ status = "okay";
+};
+
+&refclk {
+ clock-frequency = <125000000>;
+};
+
+&refclk_ccc {
+ clock-frequency = <50000000>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+};
+
+&syscontroller {
+ microchip,bitstream-flash = <&sys_ctrl_flash>;
+ status = "okay";
+};
+
+&syscontroller_qspi {
+ status = "okay";
+
+ sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ spi-rx-bus-width = <1>;
+ reg = <0>;
+ };
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "otg";
+};