diff mbox series

[v6,02/16] phy: qcom: add Qualcomm QUSB2 USB PHY driver

Message ID 20240403-b4-qcom-livetree-v6-2-130f8f50b538@linaro.org
State Accepted
Commit 8b133fc19c6eb828af7c242a87adcd7bd06e8e06
Headers show
Series Qualcomm platform USB support | expand

Commit Message

Caleb Connolly April 3, 2024, 12:07 p.m. UTC
From: Bhupesh Sharma <bhupesh.linux@gmail.com>

The Snapdragon 845 and several other Qualcomm SoCs feature this
USB high-speed phy. Add a driver for it based on the Linux driver, with
support for the SDM845, and the QCM2290 and SM6115 SoCs which will gain
support in U-Boot in future patches.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[code cleanup, switch to clk_bulk]
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
 drivers/phy/qcom/Kconfig          |   7 +
 drivers/phy/qcom/Makefile         |   1 +
 drivers/phy/qcom/phy-qcom-qusb2.c | 429 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 437 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
index f4ca174805a4..361dfb6e1126 100644
--- a/drivers/phy/qcom/Kconfig
+++ b/drivers/phy/qcom/Kconfig
@@ -11,8 +11,15 @@  config PHY_QCOM_IPQ4019_USB
 	depends on PHY && ARCH_IPQ40XX
 	help
 	  Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
 
+config PHY_QCOM_QUSB2
+	tristate "Qualcomm USB QUSB2 PHY driver"
+	depends on PHY && ARCH_SNAPDRAGON
+	help
+	  Enable this to support the Super-Speed USB transceiver on various
+	  Qualcomm chipsets.
+
 config PHY_QCOM_USB_HS_28NM
 	tristate "Qualcomm 28nm High-Speed PHY"
 	depends on PHY && ARCH_SNAPDRAGON
 	help
diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
index 2113f178c0c7..f6af985666a4 100644
--- a/drivers/phy/qcom/Makefile
+++ b/drivers/phy/qcom/Makefile
@@ -1,4 +1,5 @@ 
 obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
 obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o
+obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
 obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
 obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
diff --git a/drivers/phy/qcom/phy-qcom-qusb2.c b/drivers/phy/qcom/phy-qcom-qusb2.c
new file mode 100644
index 000000000000..c91ba18c4ab1
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qusb2.c
@@ -0,0 +1,429 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Bhupesh Sharma <bhupesh.sharma@linaro.org>
+ *
+ * Based on Linux driver
+ */
+
+#include <dm.h>
+#include <generic-phy.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <reset.h>
+#include <clk.h>
+#include <linux/delay.h>
+
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+
+#define QUSB2PHY_PLL 0x0
+#define QUSB2PHY_PLL_TEST 0x04
+#define CLK_REF_SEL BIT(7)
+
+#define QUSB2PHY_PLL_TUNE 0x08
+#define QUSB2PHY_PLL_USER_CTL1 0x0c
+#define QUSB2PHY_PLL_USER_CTL2 0x10
+#define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c
+#define QUSB2PHY_PLL_PWR_CTRL 0x18
+
+/* QUSB2PHY_PLL_STATUS register bits */
+#define PLL_LOCKED BIT(5)
+
+/* QUSB2PHY_PLL_COMMON_STATUS_ONE register bits */
+#define CORE_READY_STATUS BIT(0)
+
+/* QUSB2PHY_PORT_POWERDOWN register bits */
+#define CLAMP_N_EN BIT(5)
+#define FREEZIO_N BIT(1)
+#define POWER_DOWN BIT(0)
+
+/* QUSB2PHY_PWR_CTRL1 register bits */
+#define PWR_CTRL1_VREF_SUPPLY_TRIM BIT(5)
+#define PWR_CTRL1_CLAMP_N_EN BIT(1)
+
+#define QUSB2PHY_REFCLK_ENABLE BIT(0)
+
+#define PHY_CLK_SCHEME_SEL BIT(0)
+
+/* QUSB2PHY_INTR_CTRL register bits */
+#define DMSE_INTR_HIGH_SEL BIT(4)
+#define DPSE_INTR_HIGH_SEL BIT(3)
+#define CHG_DET_INTR_EN BIT(2)
+#define DMSE_INTR_EN BIT(1)
+#define DPSE_INTR_EN BIT(0)
+
+/* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE register bits */
+#define CORE_PLL_EN_FROM_RESET BIT(4)
+#define CORE_RESET BIT(5)
+#define CORE_RESET_MUX BIT(6)
+
+/* QUSB2PHY_IMP_CTRL1 register bits */
+#define IMP_RES_OFFSET_MASK GENMASK(5, 0)
+#define IMP_RES_OFFSET_SHIFT 0x0
+
+/* QUSB2PHY_PLL_BIAS_CONTROL_2 register bits */
+#define BIAS_CTRL2_RES_OFFSET_MASK GENMASK(5, 0)
+#define BIAS_CTRL2_RES_OFFSET_SHIFT 0x0
+
+/* QUSB2PHY_CHG_CONTROL_2 register bits */
+#define CHG_CTRL2_OFFSET_MASK GENMASK(5, 4)
+#define CHG_CTRL2_OFFSET_SHIFT 0x4
+
+/* QUSB2PHY_PORT_TUNE1 register bits */
+#define HSTX_TRIM_MASK GENMASK(7, 4)
+#define HSTX_TRIM_SHIFT 0x4
+#define PREEMPH_WIDTH_HALF_BIT BIT(2)
+#define PREEMPHASIS_EN_MASK GENMASK(1, 0)
+#define PREEMPHASIS_EN_SHIFT 0x0
+
+/* QUSB2PHY_PORT_TUNE2 register bits */
+#define HSDISC_TRIM_MASK GENMASK(1, 0)
+#define HSDISC_TRIM_SHIFT 0x0
+
+#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04
+#define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c
+#define QUSB2PHY_PLL_CMODE 0x2c
+#define QUSB2PHY_PLL_LOCK_DELAY 0x184
+#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0xb4
+#define QUSB2PHY_PLL_BIAS_CONTROL_1 0x194
+#define QUSB2PHY_PLL_BIAS_CONTROL_2 0x198
+#define QUSB2PHY_PWR_CTRL2 0x214
+#define QUSB2PHY_IMP_CTRL1 0x220
+#define QUSB2PHY_IMP_CTRL2 0x224
+#define QUSB2PHY_CHG_CTRL2 0x23c
+
+struct qusb2_phy_init_tbl {
+	unsigned int offset;
+	unsigned int val;
+	/*
+	 * register part of layout ?
+	 * if yes, then offset gives index in the reg-layout
+	 */
+	int in_layout;
+};
+
+struct qusb2_phy_cfg {
+	const struct qusb2_phy_init_tbl *tbl;
+	/* number of entries in the table */
+	unsigned int tbl_num;
+	/* offset to PHY_CLK_SCHEME register in TCSR map */
+	unsigned int clk_scheme_offset;
+
+	/* array of registers with different offsets */
+	const unsigned int *regs;
+	unsigned int mask_core_ready;
+	unsigned int disable_ctrl;
+	unsigned int autoresume_en;
+
+	/* true if PHY has PLL_TEST register to select clk_scheme */
+	bool has_pll_test;
+
+	/* true if TUNE1 register must be updated by fused value, else TUNE2 */
+	bool update_tune1_with_efuse;
+
+	/* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */
+	bool has_pll_override;
+};
+
+/* set of registers with offsets different per-PHY */
+enum qusb2phy_reg_layout {
+	QUSB2PHY_PLL_CORE_INPUT_OVERRIDE,
+	QUSB2PHY_PLL_STATUS,
+	QUSB2PHY_PORT_TUNE1,
+	QUSB2PHY_PORT_TUNE2,
+	QUSB2PHY_PORT_TUNE3,
+	QUSB2PHY_PORT_TUNE4,
+	QUSB2PHY_PORT_TUNE5,
+	QUSB2PHY_PORT_TEST1,
+	QUSB2PHY_PORT_TEST2,
+	QUSB2PHY_PORT_POWERDOWN,
+	QUSB2PHY_INTR_CTRL,
+};
+
+#define QUSB2_PHY_INIT_CFG(o, v)       \
+	{                              \
+		.offset = o, .val = v, \
+	}
+
+#define QUSB2_PHY_INIT_CFG_L(o, v)                     \
+	{                                              \
+		.offset = o, .val = v, .in_layout = 1, \
+	}
+
+static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = {
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17),
+
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
+
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
+};
+
+static const unsigned int sm6115_regs_layout[] = {
+	[QUSB2PHY_PLL_STATUS] = 0x38,	  [QUSB2PHY_PORT_TUNE1] = 0x80,
+	[QUSB2PHY_PORT_TUNE2] = 0x84,	  [QUSB2PHY_PORT_TUNE3] = 0x88,
+	[QUSB2PHY_PORT_TUNE4] = 0x8c,	  [QUSB2PHY_PORT_TUNE5] = 0x90,
+	[QUSB2PHY_PORT_TEST1] = 0xb8,	  [QUSB2PHY_PORT_TEST2] = 0x9c,
+	[QUSB2PHY_PORT_POWERDOWN] = 0xb4, [QUSB2PHY_INTR_CTRL] = 0xbc,
+};
+
+static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = {
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_1, 0x40),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_2, 0x20),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_PWR_CTRL2, 0x21),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL1, 0x0),
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL2, 0x58),
+
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x30),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x29),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0xca),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x04),
+	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x03),
+
+	QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0),
+};
+
+static const unsigned int qusb2_v2_regs_layout[] = {
+	[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
+	[QUSB2PHY_PLL_STATUS] = 0x1a0,
+	[QUSB2PHY_PORT_TUNE1] = 0x240,
+	[QUSB2PHY_PORT_TUNE2] = 0x244,
+	[QUSB2PHY_PORT_TUNE3] = 0x248,
+	[QUSB2PHY_PORT_TUNE4] = 0x24c,
+	[QUSB2PHY_PORT_TUNE5] = 0x250,
+	[QUSB2PHY_PORT_TEST1] = 0x254,
+	[QUSB2PHY_PORT_TEST2] = 0x258,
+	[QUSB2PHY_PORT_POWERDOWN] = 0x210,
+	[QUSB2PHY_INTR_CTRL] = 0x230,
+};
+
+static const struct qusb2_phy_cfg sm6115_phy_cfg = {
+	.tbl = sm6115_init_tbl,
+	.tbl_num = ARRAY_SIZE(sm6115_init_tbl),
+	.regs = sm6115_regs_layout,
+
+	.has_pll_test = true,
+	.disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
+	.mask_core_ready = PLL_LOCKED,
+	.autoresume_en = BIT(3),
+};
+
+static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
+	.tbl = qusb2_v2_init_tbl,
+	.tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl),
+	.regs = qusb2_v2_regs_layout,
+
+	.disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN |
+			 POWER_DOWN),
+	.mask_core_ready = CORE_READY_STATUS,
+	.has_pll_override = true,
+	.autoresume_en = BIT(0),
+	.update_tune1_with_efuse = true,
+};
+
+/**
+ * struct qusb2_phy - structure holding qusb2 phy attributes
+ *
+ * @phy: generic phy
+ * @base: iomapped memory space for qubs2 phy
+ *
+ * @cfg_ahb_clk: AHB2PHY interface clock
+ * @phy_rst: phy reset control
+ *
+ * @cfg: phy config data
+ * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme
+ */
+struct qusb2_phy {
+	struct phy *phy;
+	void __iomem *base;
+
+	struct clk cfg_ahb_clk;
+	struct reset_ctl phy_rst;
+
+	const struct qusb2_phy_cfg *cfg;
+	bool has_se_clk_scheme;
+};
+
+static inline void qusb2_phy_configure(void __iomem *base,
+				       const unsigned int *regs,
+				       const struct qusb2_phy_init_tbl tbl[],
+				       int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++) {
+		if (tbl[i].in_layout)
+			writel(tbl[i].val, base + regs[tbl[i].offset]);
+		else
+			writel(tbl[i].val, base + tbl[i].offset);
+	}
+}
+
+static int qusb2phy_do_reset(struct qusb2_phy *qphy)
+{
+	int ret;
+
+	ret = reset_assert(&qphy->phy_rst);
+	if (ret)
+		return ret;
+
+	udelay(500);
+
+	ret = reset_deassert(&qphy->phy_rst);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int qusb2phy_power_on(struct phy *phy)
+{
+	struct qusb2_phy *qphy = dev_get_priv(phy->dev);
+	const struct qusb2_phy_cfg *cfg = qphy->cfg;
+	int ret;
+	u32 val;
+
+	ret = qusb2phy_do_reset(qphy);
+	if (ret)
+		return ret;
+
+	/* Disable the PHY */
+	setbits_le32(qphy->base + cfg->regs[QUSB2PHY_PORT_POWERDOWN],
+		     qphy->cfg->disable_ctrl);
+
+	if (cfg->has_pll_test) {
+		/* save reset value to override reference clock scheme later */
+		val = readl(qphy->base + QUSB2PHY_PLL_TEST);
+	}
+
+	qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl, cfg->tbl_num);
+
+	/* Enable the PHY */
+	clrbits_le32(qphy->base + cfg->regs[QUSB2PHY_PORT_POWERDOWN],
+		     POWER_DOWN);
+
+	/* Required to get phy pll lock successfully */
+	udelay(150);
+
+	if (cfg->has_pll_test) {
+		val |= CLK_REF_SEL;
+
+		writel(val, qphy->base + QUSB2PHY_PLL_TEST);
+
+		/* ensure above write is through */
+		readl(qphy->base + QUSB2PHY_PLL_TEST);
+	}
+
+	/* Required to get phy pll lock successfully */
+	udelay(100);
+
+	val = readb(qphy->base + cfg->regs[QUSB2PHY_PLL_STATUS]);
+	if (!(val & cfg->mask_core_ready)) {
+		pr_err("QUSB2PHY pll lock failed: status reg = %x\n", val);
+		ret = -EBUSY;
+		return ret;
+	}
+
+	return 0;
+}
+
+static int qusb2phy_power_off(struct phy *phy)
+{
+	struct qusb2_phy *qphy = dev_get_priv(phy->dev);
+
+	/* Disable the PHY */
+	setbits_le32(qphy->base + qphy->cfg->regs[QUSB2PHY_PORT_POWERDOWN],
+		     qphy->cfg->disable_ctrl);
+
+	reset_assert(&qphy->phy_rst);
+
+	clk_disable(&qphy->cfg_ahb_clk);
+
+	return 0;
+}
+
+static int qusb2phy_clk_init(struct udevice *dev, struct qusb2_phy *qphy)
+{
+	int ret;
+
+	/* We ignore the ref clock as we currently lack a driver for rpmcc/rpmhcc where
+	 * it usually comes from - we assume it's always on.
+	 */
+	ret = clk_get_by_name(dev, "cfg_ahb", &qphy->cfg_ahb_clk);
+	if (ret == -ENOSYS || ret == -ENOENT)
+		return 0;
+	if (ret)
+		return ret;
+
+	ret = clk_enable(&qphy->cfg_ahb_clk);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int qusb2phy_probe(struct udevice *dev)
+{
+	struct qusb2_phy *qphy = dev_get_priv(dev);
+	int ret;
+
+	qphy->base = (void __iomem *)dev_read_addr(dev);
+	if (IS_ERR(qphy->base))
+		return PTR_ERR(qphy->base);
+
+	ret = qusb2phy_clk_init(dev, qphy);
+	if (ret) {
+		printf("%s: Couldn't get clocks: %d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = reset_get_by_index(dev, 0, &qphy->phy_rst);
+	if (ret) {
+		printf("%s: Couldn't get resets: %d\n", __func__, ret);
+		return ret;
+	}
+
+	qphy->cfg = (const struct qusb2_phy_cfg *)dev_get_driver_data(dev);
+	if (!qphy->cfg) {
+		printf("%s: Couldn't get driver data\n", __func__);
+		return -EINVAL;
+	}
+
+	debug("%s success qusb phy cfg %p\n", __func__, qphy->cfg);
+	return 0;
+}
+
+static struct phy_ops qusb2phy_ops = {
+	.power_on = qusb2phy_power_on,
+	.power_off = qusb2phy_power_off,
+};
+
+static const struct udevice_id qusb2phy_ids[] = {
+	{ .compatible = "qcom,qusb2-phy" },
+	{ .compatible = "qcom,qcm2290-qusb2-phy",
+	  .data = (ulong)&sm6115_phy_cfg },
+	{ .compatible = "qcom,sm6115-qusb2-phy",
+	  .data = (ulong)&sm6115_phy_cfg },
+	{ .compatible = "qcom,qusb2-v2-phy", .data = (ulong)&qusb2_v2_phy_cfg },
+	{}
+};
+
+U_BOOT_DRIVER(qcom_qusb2_phy) = {
+	.name = "qcom-qusb2-phy",
+	.id = UCLASS_PHY,
+	.of_match = qusb2phy_ids,
+	.ops = &qusb2phy_ops,
+	.probe = qusb2phy_probe,
+	.priv_auto = sizeof(struct qusb2_phy),
+};