diff mbox series

arm64: dts: qcom: sm8150-hdk: enable WiFI support

Message ID 20240403-sm8150-hdk-wifi-v1-1-8da3063829c2@linaro.org
State New
Headers show
Series arm64: dts: qcom: sm8150-hdk: enable WiFI support | expand

Commit Message

Dmitry Baryshkov April 3, 2024, 5:10 p.m. UTC 
Enable modem DSP and WiFI devices on the SM8150 HDK device. The HDK is
manufactured by Lantronix, but it attributed to Qualcomm, so the
calibration string uses Qualcomm as manufacturer.

For reference:

ath10k_snoc 18800000.wifi: qmi chip_id 0x30224 chip_family 0x4001 board_id 0x55 soc_id 0x40060000
ath10k_snoc 18800000.wifi: qmi fw_version 0x32040163 fw_build_timestamp 2019-10-08 05:42 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.0-00355-QCAHLSWMTPLZ-1
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.73 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Note the device also uses updated wlanmdsp, so it will be updated with
firmware-name for WiFi once [1] is merged.

[   68.236220] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   69.426700] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)o

[1] https://lore.kernel.org/ath10k/20240306-wcn3990-firmware-path-v2-0-f89e98e71a57@linaro.org/
---
 arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)


---
base-commit: abfb54bc2d2b925336c6ea9ae2b335e3867ceb89
change-id: 20240403-sm8150-hdk-wifi-74deaecaaecb

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index de670b407ef1..6cb6f503fdac 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -609,6 +609,11 @@  &remoteproc_cdsp {
 	firmware-name = "qcom/sm8150/cdsp.mbn";
 };
 
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8150/modem.mbn";
+	status = "okay";
+};
+
 &remoteproc_slpi {
 	status = "okay";
 
@@ -713,3 +718,14 @@  &usb_1_dwc3_ss {
 &usb_2_dwc3 {
 	dr_mode = "host";
 };
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+
+	qcom,ath10k-calibration-variant = "Qualcomm_sm8150hdk";
+};