@@ -283,72 +283,6 @@ int queue_limits_set(struct request_queue *q, struct queue_limits *lim)
}
EXPORT_SYMBOL_GPL(queue_limits_set);
-/**
- * blk_queue_bounce_limit - set bounce buffer limit for queue
- * @q: the request queue for the device
- * @bounce: bounce limit to enforce
- *
- * Description:
- * Force bouncing for ISA DMA ranges or highmem.
- *
- * DEPRECATED, don't use in new code.
- **/
-void blk_queue_bounce_limit(struct request_queue *q, enum blk_bounce bounce)
-{
- q->limits.bounce = bounce;
-}
-EXPORT_SYMBOL(blk_queue_bounce_limit);
-
-/**
- * blk_queue_max_hw_sectors - set max sectors for a request for this queue
- * @q: the request queue for the device
- * @max_hw_sectors: max hardware sectors in the usual 512b unit
- *
- * Description:
- * Enables a low level driver to set a hard upper limit,
- * max_hw_sectors, on the size of requests. max_hw_sectors is set by
- * the device driver based upon the capabilities of the I/O
- * controller.
- *
- * max_dev_sectors is a hard limit imposed by the storage device for
- * READ/WRITE requests. It is set by the disk driver.
- *
- * max_sectors is a soft limit imposed by the block layer for
- * filesystem type requests. This value can be overridden on a
- * per-device basis in /sys/block/<device>/queue/max_sectors_kb.
- * The soft limit can not exceed max_hw_sectors.
- **/
-void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
-{
- struct queue_limits *limits = &q->limits;
- unsigned int max_sectors;
-
- if ((max_hw_sectors << 9) < PAGE_SIZE) {
- max_hw_sectors = 1 << (PAGE_SHIFT - 9);
- pr_info("%s: set to minimum %u\n", __func__, max_hw_sectors);
- }
-
- max_hw_sectors = round_down(max_hw_sectors,
- limits->logical_block_size >> SECTOR_SHIFT);
- limits->max_hw_sectors = max_hw_sectors;
-
- max_sectors = min_not_zero(max_hw_sectors, limits->max_dev_sectors);
-
- if (limits->max_user_sectors)
- max_sectors = min(max_sectors, limits->max_user_sectors);
- else
- max_sectors = min(max_sectors, BLK_DEF_MAX_SECTORS_CAP);
-
- max_sectors = round_down(max_sectors,
- limits->logical_block_size >> SECTOR_SHIFT);
- limits->max_sectors = max_sectors;
-
- if (!q->disk)
- return;
- q->disk->bdi->io_pages = max_sectors >> (PAGE_SHIFT - 9);
-}
-EXPORT_SYMBOL(blk_queue_max_hw_sectors);
-
/**
* blk_queue_chunk_sectors - set size of the chunk for this queue
* @q: the request queue for the device
@@ -435,65 +369,6 @@ void blk_queue_max_zone_append_sectors(struct request_queue *q,
}
EXPORT_SYMBOL_GPL(blk_queue_max_zone_append_sectors);
-/**
- * blk_queue_max_segments - set max hw segments for a request for this queue
- * @q: the request queue for the device
- * @max_segments: max number of segments
- *
- * Description:
- * Enables a low level driver to set an upper limit on the number of
- * hw data segments in a request.
- **/
-void blk_queue_max_segments(struct request_queue *q, unsigned short max_segments)
-{
- if (!max_segments) {
- max_segments = 1;
- pr_info("%s: set to minimum %u\n", __func__, max_segments);
- }
-
- q->limits.max_segments = max_segments;
-}
-EXPORT_SYMBOL(blk_queue_max_segments);
-
-/**
- * blk_queue_max_discard_segments - set max segments for discard requests
- * @q: the request queue for the device
- * @max_segments: max number of segments
- *
- * Description:
- * Enables a low level driver to set an upper limit on the number of
- * segments in a discard request.
- **/
-void blk_queue_max_discard_segments(struct request_queue *q,
- unsigned short max_segments)
-{
- q->limits.max_discard_segments = max_segments;
-}
-EXPORT_SYMBOL_GPL(blk_queue_max_discard_segments);
-
-/**
- * blk_queue_max_segment_size - set max segment size for blk_rq_map_sg
- * @q: the request queue for the device
- * @max_size: max size of segment in bytes
- *
- * Description:
- * Enables a low level driver to set an upper limit on the size of a
- * coalesced segment
- **/
-void blk_queue_max_segment_size(struct request_queue *q, unsigned int max_size)
-{
- if (max_size < PAGE_SIZE) {
- max_size = PAGE_SIZE;
- pr_info("%s: set to minimum %u\n", __func__, max_size);
- }
-
- /* see blk_queue_virt_boundary() for the explanation */
- WARN_ON_ONCE(q->limits.virt_boundary_mask);
-
- q->limits.max_segment_size = max_size;
-}
-EXPORT_SYMBOL(blk_queue_max_segment_size);
-
/**
* blk_queue_logical_block_size - set logical block size for the queue
* @q: the request queue for the device
@@ -660,29 +535,6 @@ void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt)
}
EXPORT_SYMBOL(blk_limits_io_opt);
-/**
- * blk_queue_io_opt - set optimal request size for the queue
- * @q: the request queue for the device
- * @opt: optimal request size in bytes
- *
- * Description:
- * Storage devices may report an optimal I/O size, which is the
- * device's preferred unit for sustained I/O. This is rarely reported
- * for disk drives. For RAID arrays it is usually the stripe width or
- * the internal track size. A properly aligned multiple of
- * optimal_io_size is the preferred request size for workloads where
- * sustained throughput is desired.
- */
-void blk_queue_io_opt(struct request_queue *q, unsigned int opt)
-{
- blk_limits_io_opt(&q->limits, opt);
- if (!q->disk)
- return;
- q->disk->bdi->ra_pages =
- max(queue_io_opt(q) * 2 / PAGE_SIZE, VM_READAHEAD_PAGES);
-}
-EXPORT_SYMBOL(blk_queue_io_opt);
-
static int queue_limit_alignment_offset(const struct queue_limits *lim,
sector_t sector)
{
@@ -932,81 +784,6 @@ void blk_queue_update_dma_pad(struct request_queue *q, unsigned int mask)
}
EXPORT_SYMBOL(blk_queue_update_dma_pad);
-/**
- * blk_queue_segment_boundary - set boundary rules for segment merging
- * @q: the request queue for the device
- * @mask: the memory boundary mask
- **/
-void blk_queue_segment_boundary(struct request_queue *q, unsigned long mask)
-{
- if (mask < PAGE_SIZE - 1) {
- mask = PAGE_SIZE - 1;
- pr_info("%s: set to minimum %lx\n", __func__, mask);
- }
-
- q->limits.seg_boundary_mask = mask;
-}
-EXPORT_SYMBOL(blk_queue_segment_boundary);
-
-/**
- * blk_queue_virt_boundary - set boundary rules for bio merging
- * @q: the request queue for the device
- * @mask: the memory boundary mask
- **/
-void blk_queue_virt_boundary(struct request_queue *q, unsigned long mask)
-{
- q->limits.virt_boundary_mask = mask;
-
- /*
- * Devices that require a virtual boundary do not support scatter/gather
- * I/O natively, but instead require a descriptor list entry for each
- * page (which might not be idential to the Linux PAGE_SIZE). Because
- * of that they are not limited by our notion of "segment size".
- */
- if (mask)
- q->limits.max_segment_size = UINT_MAX;
-}
-EXPORT_SYMBOL(blk_queue_virt_boundary);
-
-/**
- * blk_queue_dma_alignment - set dma length and memory alignment
- * @q: the request queue for the device
- * @mask: alignment mask
- *
- * description:
- * set required memory and length alignment for direct dma transactions.
- * this is used when building direct io requests for the queue.
- *
- **/
-void blk_queue_dma_alignment(struct request_queue *q, int mask)
-{
- q->limits.dma_alignment = mask;
-}
-EXPORT_SYMBOL(blk_queue_dma_alignment);
-
-/**
- * blk_queue_update_dma_alignment - update dma length and memory alignment
- * @q: the request queue for the device
- * @mask: alignment mask
- *
- * description:
- * update required memory and length alignment for direct dma transactions.
- * If the requested alignment is larger than the current alignment, then
- * the current queue alignment is updated to the new value, otherwise it
- * is left alone. The design of this is to allow multiple objects
- * (driver, device, transport etc) to set their respective
- * alignments without having them interfere.
- *
- **/
-void blk_queue_update_dma_alignment(struct request_queue *q, int mask)
-{
- BUG_ON(mask > PAGE_SIZE);
-
- if (mask > q->limits.dma_alignment)
- q->limits.dma_alignment = mask;
-}
-EXPORT_SYMBOL(blk_queue_update_dma_alignment);
-
/**
* blk_set_queue_depth - tell the block layer about the device queue depth
* @q: the request queue for the device
@@ -1060,28 +837,6 @@ void blk_queue_required_elevator_features(struct request_queue *q,
}
EXPORT_SYMBOL_GPL(blk_queue_required_elevator_features);
-/**
- * blk_queue_can_use_dma_map_merging - configure queue for merging segments.
- * @q: the request queue for the device
- * @dev: the device pointer for dma
- *
- * Tell the block layer about merging the segments by dma map of @q.
- */
-bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
- struct device *dev)
-{
- unsigned long boundary = dma_get_merge_boundary(dev);
-
- if (!boundary)
- return false;
-
- /* No need to update max_segment_size. see blk_queue_virt_boundary() */
- blk_queue_virt_boundary(q, boundary);
-
- return true;
-}
-EXPORT_SYMBOL_GPL(blk_queue_can_use_dma_map_merging);
-
/**
* disk_set_zoned - inidicate a zoned device
* @disk: gendisk to configure
@@ -4561,9 +4561,9 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track(
len_to_track_end = 0;
/*
* A tidaw can address 4k of memory, but must not cross page boundaries
- * We can let the block layer handle this by setting
- * blk_queue_segment_boundary to page boundaries and
- * blk_max_segment_size to page size when setting up the request queue.
+ * We can let the block layer handle this by setting seg_boundary_mask
+ * to page boundaries and max_segment_size to page size when setting up
+ * the request queue.
* For write requests, a TIDAW must not cross track boundaries, because
* we have to set the CBC flag on the last tidaw for each track.
*/
@@ -908,15 +908,9 @@ static inline void queue_limits_cancel_update(struct request_queue *q)
/*
* Access functions for manipulating queue properties
*/
-void blk_queue_bounce_limit(struct request_queue *q, enum blk_bounce limit);
-extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int);
-extern void blk_queue_max_segments(struct request_queue *, unsigned short);
-extern void blk_queue_max_discard_segments(struct request_queue *,
- unsigned short);
void blk_queue_max_secure_erase_sectors(struct request_queue *q,
unsigned int max_sectors);
-extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
extern void blk_queue_max_discard_sectors(struct request_queue *q,
unsigned int max_discard_sectors);
extern void blk_queue_max_write_zeroes_sectors(struct request_queue *q,
@@ -933,7 +927,6 @@ void disk_update_readahead(struct gendisk *disk);
extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min);
extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
extern void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt);
-extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
extern void blk_set_queue_depth(struct request_queue *q, unsigned int depth);
extern void blk_set_stacking_limits(struct queue_limits *lim);
extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
@@ -941,10 +934,6 @@ extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
void queue_limits_stack_bdev(struct queue_limits *t, struct block_device *bdev,
sector_t offset, const char *pfx);
extern void blk_queue_update_dma_pad(struct request_queue *, unsigned int);
-extern void blk_queue_segment_boundary(struct request_queue *, unsigned long);
-extern void blk_queue_virt_boundary(struct request_queue *, unsigned long);
-extern void blk_queue_dma_alignment(struct request_queue *, int);
-extern void blk_queue_update_dma_alignment(struct request_queue *, int);
extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
extern void blk_queue_write_cache(struct request_queue *q, bool enabled, bool fua);
@@ -961,8 +950,6 @@ void disk_set_independent_access_ranges(struct gendisk *disk,
extern void blk_queue_required_elevator_features(struct request_queue *q,
unsigned int features);
-extern bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
- struct device *dev);
bool __must_check blk_get_queue(struct request_queue *);
extern void blk_put_queue(struct request_queue *);
@@ -433,8 +433,8 @@ struct mmc_host {
mmc_pm_flag_t pm_caps; /* supported pm features */
/* host specific block data */
- unsigned int max_seg_size; /* see blk_queue_max_segment_size */
- unsigned short max_segs; /* see blk_queue_max_segments */
+ unsigned int max_seg_size; /* lim->max_segment_size */
+ unsigned short max_segs; /* lim->max_segments */
unsigned short unused;
unsigned int max_req_size; /* maximum number of bytes in one req */
unsigned int max_blk_size; /* maximum size of one mmc block */