diff mbox series

Bluetooth: btusb: mediatek: Add usb reset for firmware setup failure

Message ID 20240412084128.24452-1-hao.qin@mediatek.com
State New
Headers show
Series Bluetooth: btusb: mediatek: Add usb reset for firmware setup failure | expand

Commit Message

Hao Qin April 12, 2024, 8:41 a.m. UTC
Add usb reset to recover BT device from a firmware setup failure,
it will restore the device to its original state and attempt setup
firmware again.

Signed-off-by: Hao Qin <hao.qin@mediatek.com>
---
 drivers/bluetooth/btusb.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

bluez.test.bot@gmail.com April 12, 2024, 9:32 a.m. UTC | #1
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=843929

---Test result---

Test Summary:
CheckPatch                    PASS      0.64 seconds
GitLint                       PASS      0.31 seconds
SubjectPrefix                 PASS      0.12 seconds
BuildKernel                   PASS      29.48 seconds
CheckAllWarning               PASS      34.55 seconds
CheckSparse                   PASS      37.69 seconds
CheckSmatch                   FAIL      35.40 seconds
BuildKernel32                 PASS      28.54 seconds
TestRunnerSetup               PASS      512.68 seconds
TestRunner_l2cap-tester       PASS      18.44 seconds
TestRunner_iso-tester         PASS      28.77 seconds
TestRunner_bnep-tester        PASS      4.85 seconds
TestRunner_mgmt-tester        PASS      109.71 seconds
TestRunner_rfcomm-tester      PASS      7.43 seconds
TestRunner_sco-tester         PASS      15.11 seconds
TestRunner_ioctl-tester       PASS      7.75 seconds
TestRunner_mesh-tester        FAIL      6.00 seconds
TestRunner_smp-tester         PASS      6.90 seconds
TestRunner_userchan-tester    PASS      5.06 seconds
IncrementalBuild              PASS      27.50 seconds

Details
##############################
Test: CheckSmatch - FAIL
Desc: Run smatch tool with source
Output:

Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/hci_core.o] Error 139
make[4]: *** Deleting file 'net/bluetooth/hci_core.o'
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bcm203x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bcm203x.o'
make[4]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bpa10x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bpa10x.o'
make[3]: *** [scripts/Makefile.build:485: drivers/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 9 (90.0%), Failed: 1, Not Run: 0

Failed Test Cases
Mesh - Send cancel - 2                               Failed       0.094 seconds


---
Regards,
Linux Bluetooth
Luiz Augusto von Dentz April 16, 2024, 2:53 p.m. UTC | #2
Hi,

On Fri, Apr 12, 2024 at 4:43 AM Hao Qin <hao.qin@mediatek.com> wrote:
>
> Add usb reset to recover BT device from a firmware setup failure,
> it will restore the device to its original state and attempt setup
> firmware again.
>
> Signed-off-by: Hao Qin <hao.qin@mediatek.com>
> ---
>  drivers/bluetooth/btusb.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 4c0cc13adb47..c5aab361795e 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -3160,6 +3160,9 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
>                                                 btusb_mtk_hci_wmt_sync);
>                 if (err < 0) {
>                         bt_dev_err(hdev, "Failed to set up firmware (%d)", err);
> +                       btusb_stop_traffic(data);
> +                       usb_kill_anchored_urbs(&data->tx_anchor);
> +                       usb_queue_reset_device(data->intf);

What if this was already caused by a reset? Wouldn't that create a
loop resetting the device over and over again?

>                         return err;
>                 }
>
> --
> 2.18.0
>
diff mbox series

Patch

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 4c0cc13adb47..c5aab361795e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3160,6 +3160,9 @@  static int btusb_mtk_setup(struct hci_dev *hdev)
 						btusb_mtk_hci_wmt_sync);
 		if (err < 0) {
 			bt_dev_err(hdev, "Failed to set up firmware (%d)", err);
+			btusb_stop_traffic(data);
+			usb_kill_anchored_urbs(&data->tx_anchor);
+			usb_queue_reset_device(data->intf);
 			return err;
 		}