| Message ID | 20240414-arm-psci-system_reset2-vendor-reboots-v2-1-da9a055a648f@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/4] dt-bindings: power: reset: Convert mode-.* properties to array | expand |
On 14/04/2024 21:30, Elliot Berman wrote: > PSCI reboot mode will map a mode name to multiple magic values instead > of just one. Convert the mode-.* property to an array. Users of the > reboot-mode schema will need to specify the maxItems of the mode-.* > properties. Existing users will all be 1. > > Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> > --- > .../devicetree/bindings/power/reset/nvmem-reboot-mode.yaml | 4 ++++ > Documentation/devicetree/bindings/power/reset/qcom,pon.yaml | 4 ++++ > .../devicetree/bindings/power/reset/reboot-mode.yaml | 12 ++++++++++-- > .../devicetree/bindings/power/reset/syscon-reboot-mode.yaml | 4 ++++ > 4 files changed, 22 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml > index 627f8a6078c2..03b3b9be36de 100644 > --- a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml > +++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml > @@ -30,6 +30,10 @@ properties: > > allOf: > - $ref: reboot-mode.yaml# > + - patternProperties: > + "^mode-.*$": > + items: > + maxItems: 1 You still need to limit total number of items. This only defines how many items you have in each inner cell of the matrix. What about the other cell? I understood that you want something more or less equivalent, but the code does not look like. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml index 627f8a6078c2..03b3b9be36de 100644 --- a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml @@ -30,6 +30,10 @@ properties: allOf: - $ref: reboot-mode.yaml# + - patternProperties: + "^mode-.*$": + items: + maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml index fc8105a7b9b2..95964e04d5d6 100644 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -68,6 +68,10 @@ allOf: then: allOf: - $ref: reboot-mode.yaml# + - patternProperties: + "^mode-.*$": + items: + maxItems: 1 properties: reg: diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml index ad0a0b95cec1..b9617b8880c3 100644 --- a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml @@ -28,13 +28,21 @@ description: | properties: mode-normal: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: "#/patternProperties/^mode-.*$" description: Default value to set on a reboot if no command was provided. patternProperties: "^mode-.*$": - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + # Note: to reference this schema, the allOf should include hint about + # maxItems for the inner cell + # allOf: + # - $ref: /schemas/power/reset/reboot-mode.yaml# + # - patternProperties: + # "^mode-.*$": + # items: + # maxItems: 1 additionalProperties: true diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml index b6acff199cde..bf6d68355e7f 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml @@ -31,6 +31,10 @@ properties: allOf: - $ref: reboot-mode.yaml# + - patternProperties: + "^mode-.*$": + items: + maxItems: 1 unevaluatedProperties: false
PSCI reboot mode will map a mode name to multiple magic values instead of just one. Convert the mode-.* property to an array. Users of the reboot-mode schema will need to specify the maxItems of the mode-.* properties. Existing users will all be 1. Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> --- .../devicetree/bindings/power/reset/nvmem-reboot-mode.yaml | 4 ++++ Documentation/devicetree/bindings/power/reset/qcom,pon.yaml | 4 ++++ .../devicetree/bindings/power/reset/reboot-mode.yaml | 12 ++++++++++-- .../devicetree/bindings/power/reset/syscon-reboot-mode.yaml | 4 ++++ 4 files changed, 22 insertions(+), 2 deletions(-)