@@ -2955,6 +2955,9 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
+ of_property_read_u32(np, "fifo-addr-override",
+ &host->fifo_addr_override);
+
if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
pdata->bus_hz = clock_frequency;
@@ -3163,6 +3166,9 @@ int dw_mci_probe(struct dw_mci *host)
else
host->fifo_reg = host->regs + DATA_240A_OFFSET;
+ if (host->fifo_addr_override)
+ host->fifo_reg = host->regs + host->fifo_addr_override;
+
tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
host->irq_flags, "dw-mci", host);
@@ -107,6 +107,7 @@ struct dw_mci_dma_slave {
* @ciu_clk: Pointer to card interface unit clock instance.
* @slot: Slots sharing this MMC controller.
* @fifo_depth: depth of FIFO.
+ * @fifo_addr_override: override fifo reg offset with this value.
* @data_shift: log2 of FIFO item size.
* @part_buf_start: Start index in part_buf.
* @part_buf_count: Bytes of partial data in part_buf.
@@ -154,6 +155,7 @@ struct dw_mci {
spinlock_t irq_lock;
void __iomem *regs;
void __iomem *fifo_reg;
+ u32 fifo_addr_override;
struct scatterlist *sg;
struct sg_mapping_iter sg_miter;
The FIFO address of version 0x210A conflict with assumption that 0x100(version < 0x240A) and 0x200(version >= 0x240A) in some dw mmc implementation. So this property serves as a workaround to set fifo address with value provided by DT node. Signed-off-by: Jun Nie <jun.nie@linaro.org> --- drivers/mmc/host/dw_mmc.c | 6 ++++++ include/linux/mmc/dw_mmc.h | 2 ++ 2 files changed, 8 insertions(+) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html