deleted file mode 100644
@@ -1,729 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "msm8916-pm8916.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-#include <dt-bindings/sound/apq8016-lpass.h>
-
-/ {
- model = "Qualcomm Technologies, Inc. APQ 8016 SBC";
- compatible = "qcom,apq8016-sbc", "qcom,apq8016";
-
- aliases {
- mmc0 = &sdhc_1; /* eMMC */
- mmc1 = &sdhc_2; /* SD card */
- serial0 = &blsp_uart2;
- serial1 = &blsp_uart1;
- usid0 = &pm8916_0;
- i2c0 = &blsp_i2c2;
- i2c1 = &blsp_i2c6;
- i2c3 = &blsp_i2c4;
- spi0 = &blsp_spi5;
- spi1 = &blsp_spi3;
- };
-
- chosen {
- stdout-path = "serial0";
- };
-
- reserved-memory {
- ramoops@bff00000 {
- compatible = "ramoops";
- reg = <0x0 0xbff00000 0x0 0x100000>;
-
- record-size = <0x20000>;
- console-size = <0x20000>;
- ftrace-size = <0x20000>;
- };
- };
-
- usb2513 {
- compatible = "smsc,usb3503";
- reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
- initial-mode = <1>;
- };
-
- usb_id: usb-id {
- compatible = "linux,extcon-usb-gpio";
- id-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb_id_default>;
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con: endpoint {
- remote-endpoint = <&adv7533_out>;
- };
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&msm_key_volp_n_default>;
-
- button {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&tlmm_leds>,
- <&pm8916_gpios_leds>,
- <&pm8916_mpps_leds>;
-
- compatible = "gpio-leds";
-
- led@1 {
- label = "apq8016-sbc:green:user1";
- function = LED_FUNCTION_HEARTBEAT;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
-
- led@2 {
- label = "apq8016-sbc:green:user2";
- function = LED_FUNCTION_DISK_ACTIVITY;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
- default-state = "off";
- };
-
- led@3 {
- label = "apq8016-sbc:green:user3";
- function = LED_FUNCTION_DISK_ACTIVITY;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc1";
- default-state = "off";
- };
-
- led@4 {
- label = "apq8016-sbc:green:user4";
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "none";
- panic-indicator;
- default-state = "off";
- };
-
- led@5 {
- label = "apq8016-sbc:yellow:wlan";
- function = LED_FUNCTION_WLAN;
- color = <LED_COLOR_ID_YELLOW>;
- gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tx";
- default-state = "off";
- };
-
- led@6 {
- label = "apq8016-sbc:blue:bt";
- function = LED_FUNCTION_BLUETOOTH;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "bluetooth-power";
- default-state = "off";
- };
- };
-};
-
-&blsp_i2c2 {
- /* On Low speed expansion: LS-I2C0 */
- status = "okay";
-};
-
-&blsp_i2c4 {
- /* On High speed expansion: HS-I2C2 */
- status = "okay";
-
- adv_bridge: bridge@39 {
- status = "okay";
-
- compatible = "adi,adv7533";
- reg = <0x39>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-
- adi,dsi-lanes = <4>;
- clocks = <&rpmcc RPM_SMD_BB_CLK2>;
- clock-names = "cec";
-
- pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
-
- avdd-supply = <&pm8916_l6>;
- a2vdd-supply = <&pm8916_l6>;
- dvdd-supply = <&pm8916_l6>;
- pvdd-supply = <&pm8916_l6>;
- v1p2-supply = <&pm8916_l6>;
- v3p3-supply = <&pm8916_l17>;
-
- pinctrl-names = "default","sleep";
- pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
- pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
- #sound-dai-cells = <1>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7533_in: endpoint {
- remote-endpoint = <&mdss_dsi0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7533_out: endpoint {
- remote-endpoint = <&hdmi_con>;
- };
- };
- };
- };
-};
-
-&blsp_i2c6 {
- /* On Low speed expansion: LS-I2C1 */
- status = "okay";
-};
-
-&blsp_spi3 {
- /* On High speed expansion: HS-SPI1 */
- status = "okay";
-};
-
-&blsp_spi5 {
- /* On Low speed expansion: LS-SPI0 */
- status = "okay";
-};
-
-&blsp_uart1 {
- status = "okay";
- label = "LS-UART0";
-};
-
-&blsp_uart2 {
- status = "okay";
- label = "LS-UART1";
-};
-
-&camss {
- status = "okay";
-};
-
-&gpu {
- status = "okay";
-};
-
-&lpass {
- status = "okay";
-};
-
-&lpass_codec {
- status = "okay";
-};
-
-&mba_mem {
- status = "okay";
-};
-
-&mdss {
- status = "okay";
-};
-
-&mdss_dsi0_out {
- data-lanes = <0 1 2 3>;
- remote-endpoint = <&adv7533_in>;
-};
-
-&mpss {
- status = "okay";
-
- firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
-};
-
-&mpss_mem {
- status = "okay";
- reg = <0x0 0x86800000 0x0 0x2b00000>;
-};
-
-&pm8916_codec {
- status = "okay";
- qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
- qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
-};
-
-&pm8916_resin {
- status = "okay";
- linux,code = <KEY_VOLUMEDOWN>;
-};
-
-&pm8916_rpm_regulators {
- /*
- * The 96Boards specification expects a 1.8V power rail on the low-speed
- * expansion connector that is able to provide at least 0.18W / 100 mA.
- * L15/L16 are connected in parallel to provide 55 mA each. A minimum load
- * must be specified to ensure the regulators are not put in LPM where they
- * would only provide 5 mA.
- */
- pm8916_l15: l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-system-load = <50000>;
- regulator-allow-set-load;
- regulator-always-on;
- };
- pm8916_l16: l16 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-system-load = <50000>;
- regulator-allow-set-load;
- regulator-always-on;
- };
-
- pm8916_l17: l17 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-};
-
-&sdhc_1 {
- status = "okay";
-};
-
-&sdhc_2 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
-
- cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-};
-
-&sound {
- status = "okay";
-
- pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
- pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
- pinctrl-names = "default", "sleep";
- model = "DB410c";
- audio-routing =
- "AMIC2", "MIC BIAS Internal2",
- "AMIC3", "MIC BIAS External1";
-
- quaternary-dai-link {
- link-name = "ADV7533";
- cpu {
- sound-dai = <&lpass MI2S_QUATERNARY>;
- };
- codec {
- sound-dai = <&adv_bridge 0>;
- };
- };
-
- primary-dai-link {
- link-name = "WCD";
- cpu {
- sound-dai = <&lpass MI2S_PRIMARY>;
- };
- codec {
- sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
- };
- };
-
- tertiary-dai-link {
- link-name = "WCD-Capture";
- cpu {
- sound-dai = <&lpass MI2S_TERTIARY>;
- };
- codec {
- sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
- };
- };
-};
-
-&usb {
- status = "okay";
- extcon = <&usb_id>, <&usb_id>;
-
- pinctrl-names = "default", "device";
- pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
- pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
-};
-
-&usb_hs_phy {
- extcon = <&usb_id>;
-};
-
-&venus {
- status = "okay";
-};
-
-&venus_mem {
- status = "okay";
-};
-
-&wcnss {
- status = "okay";
- firmware-name = "qcom/apq8016/wcnss.mbn";
-};
-
-&wcnss_ctrl {
- firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
-};
-
-&wcnss_iris {
- compatible = "qcom,wcn3620";
-};
-
-&wcnss_mem {
- status = "okay";
-};
-
-/* Enable CoreSight */
-&cti0 { status = "okay"; };
-&cti1 { status = "okay"; };
-&cti12 { status = "okay"; };
-&cti13 { status = "okay"; };
-&cti14 { status = "okay"; };
-&cti15 { status = "okay"; };
-&debug0 { status = "okay"; };
-&debug1 { status = "okay"; };
-&debug2 { status = "okay"; };
-&debug3 { status = "okay"; };
-&etf { status = "okay"; };
-&etm0 { status = "okay"; };
-&etm1 { status = "okay"; };
-&etm2 { status = "okay"; };
-&etm3 { status = "okay"; };
-&etr { status = "okay"; };
-&funnel0 { status = "okay"; };
-&funnel1 { status = "okay"; };
-&replicator { status = "okay"; };
-&stm { status = "okay"; };
-&tpiu { status = "okay"; };
-
-/*
- * 2mA drive strength is not enough when connecting multiple
- * I2C devices with different pull up resistors.
- */
-&blsp_i2c2_default {
- drive-strength = <16>;
-};
-
-&blsp_i2c4_default {
- drive-strength = <16>;
-};
-
-&blsp_i2c6_default {
- drive-strength = <16>;
-};
-
-/*
- * GPIO name legend: proper name = the GPIO line is used as GPIO
- * NC = not connected (pin out but not routed from the chip to
- * anything the board)
- * "[PER]" = pin is muxed for [peripheral] (not GPIO)
- * LSEC = Low Speed External Connector
- * HSEC = High Speed External Connector
- *
- * Line names are taken from the schematic "DragonBoard410c"
- * dated monday, august 31, 2015. Page 5 in particular.
- *
- * For the lines routed to the external connectors the
- * lines are named after the 96Boards CE Specification 1.0,
- * Appendix "Expansion Connector Signal Description".
- *
- * When the 96Board naming of a line and the schematic name of
- * the same line are in conflict, the 96Board specification
- * takes precedence, which means that the external UART on the
- * LSEC is named UART0 while the schematic and SoC names this
- * UART3. This is only for the informational lines i.e. "[FOO]",
- * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
- * ones actually used for GPIO.
- */
-
-&tlmm {
- gpio-line-names =
- "[UART0_TX]", /* GPIO_0, LSEC pin 5 */
- "[UART0_RX]", /* GPIO_1, LSEC pin 7 */
- "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
- "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
- "[UART1_TX]", /* GPIO_4, LSEC pin 11 */
- "[UART1_RX]", /* GPIO_5, LSEC pin 13 */
- "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
- "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
- "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
- "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
- "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
- "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
- "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
- "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
- "[I2C3_SDA]", /* HSEC pin 38 */
- "[I2C3_SCL]", /* HSEC pin 36 */
- "[SPI0_MOSI]", /* LSEC pin 14 */
- "[SPI0_MISO]", /* LSEC pin 10 */
- "[SPI0_CS_N]", /* LSEC pin 12 */
- "[SPI0_CLK]", /* LSEC pin 8 */
- "HDMI_HPD_N", /* GPIO 20 */
- "USR_LED_1_CTRL",
- "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
- "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
- "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
- "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
- "[CSI0_MCLK]", /* HSEC pin 15 */
- "[CSI1_MCLK]", /* HSEC pin 17 */
- "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
- "[I2C2_SDA]", /* HSEC pin 34 */
- "[I2C2_SCL]", /* HSEC pin 32 */
- "DSI2HDMI_INT_N",
- "DSI_SW_SEL_APQ",
- "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
- "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
- "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
- "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
- "FORCED_USB_BOOT",
- "SD_CARD_DET_N",
- "[WCSS_BT_SSBI]",
- "[WCSS_WLAN_DATA_2]", /* GPIO 40 */
- "[WCSS_WLAN_DATA_1]",
- "[WCSS_WLAN_DATA_0]",
- "[WCSS_WLAN_SET]",
- "[WCSS_WLAN_CLK]",
- "[WCSS_FM_SSBI]",
- "[WCSS_FM_SDI]",
- "[WCSS_BT_DAT_CTL]",
- "[WCSS_BT_DAT_STB]",
- "NC",
- "NC", /* GPIO 50 */
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC", /* GPIO 60 */
- "NC",
- "NC",
- "[CDC_PDM0_CLK]",
- "[CDC_PDM0_SYNC]",
- "[CDC_PDM0_TX0]",
- "[CDC_PDM0_RX0]",
- "[CDC_PDM0_RX1]",
- "[CDC_PDM0_RX2]",
- "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
- "NC", /* GPIO 70 */
- "NC",
- "NC",
- "NC",
- "NC", /* GPIO 74 */
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "BOOT_CONFIG_0", /* GPIO 80 */
- "BOOT_CONFIG_1",
- "BOOT_CONFIG_2",
- "BOOT_CONFIG_3",
- "NC",
- "NC",
- "BOOT_CONFIG_5",
- "NC",
- "NC",
- "NC",
- "NC", /* GPIO 90 */
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC", /* GPIO 100 */
- "NC",
- "NC",
- "NC",
- "SSBI_GPS",
- "NC",
- "NC",
- "KEY_VOLP_N",
- "NC",
- "NC",
- "[LS_EXP_MI2S_WS]", /* GPIO 110 */
- "NC",
- "NC",
- "[LS_EXP_MI2S_SCK]",
- "[LS_EXP_MI2S_DATA0]",
- "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
- "NC",
- "[DSI2HDMI_MI2S_WS]",
- "[DSI2HDMI_MI2S_SCK]",
- "[DSI2HDMI_MI2S_DATA0]",
- "USR_LED_2_CTRL", /* GPIO 120 */
- "SB_HS_ID";
-
- sdc2_cd_default: sdc2-cd-default-state {
- pins = "gpio38";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- tlmm_leds: tlmm-leds-state {
- pins = "gpio21", "gpio120";
- function = "gpio";
-
- output-low;
- };
-
- usb_id_default: usb-id-default-state {
- pins = "gpio121";
- function = "gpio";
-
- drive-strength = <8>;
- bias-pull-up;
- };
-
- adv7533_int_active: adv533-int-active-state {
- pins = "gpio31";
- function = "gpio";
-
- drive-strength = <16>;
- bias-disable;
- };
-
- adv7533_int_suspend: adv7533-int-suspend-state {
- pins = "gpio31";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- adv7533_switch_active: adv7533-switch-active-state {
- pins = "gpio32";
- function = "gpio";
-
- drive-strength = <16>;
- bias-disable;
- };
-
- adv7533_switch_suspend: adv7533-switch-suspend-state {
- pins = "gpio32";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- msm_key_volp_n_default: msm-key-volp-n-default-state {
- pins = "gpio107";
- function = "gpio";
-
- drive-strength = <8>;
- bias-pull-up;
- };
-};
-
-&pm8916_gpios {
- gpio-line-names =
- "USR_LED_3_CTRL",
- "USR_LED_4_CTRL",
- "USB_HUB_RESET_N_PM",
- "USB_SW_SEL_PM";
-
- usb_hub_reset_pm: usb-hub-reset-pm-state {
- pins = "gpio3";
- function = PMIC_GPIO_FUNC_NORMAL;
-
- input-disable;
- output-high;
- };
-
- usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
- pins = "gpio3";
- function = PMIC_GPIO_FUNC_NORMAL;
-
- output-low;
- };
-
- usb_sw_sel_pm: usb-sw-sel-pm-state {
- pins = "gpio4";
- function = PMIC_GPIO_FUNC_NORMAL;
-
- power-source = <PM8916_GPIO_VPH>;
- input-disable;
- output-high;
- };
-
- usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
- pins = "gpio4";
- function = PMIC_GPIO_FUNC_NORMAL;
-
- power-source = <PM8916_GPIO_VPH>;
- input-disable;
- output-low;
- };
-
- pm8916_gpios_leds: pm8916-gpios-leds-state {
- pins = "gpio1", "gpio2";
- function = PMIC_GPIO_FUNC_NORMAL;
-
- output-low;
- };
-};
-
-&pm8916_mpps {
- gpio-line-names =
- "VDD_PX_BIAS",
- "WLAN_LED_CTRL",
- "BT_LED_CTRL",
- "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
-
- pinctrl-names = "default";
- pinctrl-0 = <&ls_exp_gpio_f>;
-
- ls_exp_gpio_f: pm8916-mpp4-state {
- pins = "mpp4";
- function = "digital";
-
- output-low;
- power-source = <PM8916_MPP_L5>; /* 1.8V */
- };
-
- pm8916_mpps_leds: pm8916-mpps-state {
- pins = "mpp2", "mpp3";
- function = "digital";
-
- output-low;
- };
-};
deleted file mode 100644
@@ -1,1137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "msm8996.dtsi"
-#include "pm8994.dtsi"
-#include "pmi8994.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/sound/qcom,q6afe.h>
-#include <dt-bindings/sound/qcom,q6asm.h>
-#include <dt-bindings/sound/qcom,wcd9335.h>
-
-/*
- * GPIO name legend: proper name = the GPIO line is used as GPIO
- * NC = not connected (pin out but not routed from the chip to
- * anything the board)
- * "[PER]" = pin is muxed for [peripheral] (not GPIO)
- * LSEC = Low Speed External Connector
- * P HSEC = Primary High Speed External Connector
- * S HSEC = Secondary High Speed External Connector
- * J14 = Camera Connector
- * TP = Test Points
- *
- * Line names are taken from the schematic "DragonBoard 820c",
- * drawing no: LM25-P2751-1
- *
- * For the lines routed to the external connectors the
- * lines are named after the 96Boards CE Specification 1.0,
- * Appendix "Expansion Connector Signal Description".
- *
- * When the 96Board naming of a line and the schematic name of
- * the same line are in conflict, the 96Board specification
- * takes precedence, which means that the external UART on the
- * LSEC is named UART0 while the schematic and SoC names this
- * UART3. This is only for the informational lines i.e. "[FOO]",
- * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
- * ones actually used for GPIO.
- */
-
-/ {
- model = "Qualcomm Technologies, Inc. DB820c";
- compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
-
- aliases {
- serial0 = &blsp2_uart2;
- serial1 = &blsp2_uart3;
- serial2 = &blsp1_uart2;
- i2c0 = &blsp1_i2c3;
- i2c1 = &blsp2_i2c1;
- i2c2 = &blsp2_i2c1;
- spi0 = &blsp1_spi1;
- spi1 = &blsp2_spi6;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- div1_mclk: divclk1 {
- compatible = "gpio-gate-clock";
- pinctrl-0 = <&audio_mclk>;
- pinctrl-names = "default";
- clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
- #clock-cells = <0>;
- enable-gpios = <&pm8994_gpios 15 0>;
- };
-
- divclk4: divclk4 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "divclk4";
-
- pinctrl-names = "default";
- pinctrl-0 = <&divclk4_pin_a>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&volume_up_gpio>;
-
- button {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb2_id: usb2-id {
- compatible = "linux,extcon-usb-gpio";
- id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_vbus_det_gpio>;
- };
-
- usb3_id: usb3-id {
- compatible = "linux,extcon-usb-gpio";
- id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_det_gpio>;
- };
-
- vph_pwr: vph-pwr-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vph_pwr";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- };
-
- wlan_en: wlan-en-1-8v {
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_en_gpios>;
- compatible = "regulator-fixed";
- regulator-name = "wlan-en-regulator";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- gpio = <&pm8994_gpios 8 0>;
-
- /* WLAN card specific delay */
- startup-delay-us = <70000>;
- enable-active-high;
- };
-};
-
-&blsp1_i2c3 {
- /* On Low speed expansion: LS-I2C0 */
- status = "okay";
-};
-
-&blsp1_spi1 {
- /* On Low speed expansion */
- status = "okay";
-};
-
-&blsp1_uart2 {
- label = "BT-UART";
- status = "okay";
-
- bluetooth {
- compatible = "qcom,qca6174-bt";
-
- /* bt_disable_n gpio */
- enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
-
- clocks = <&divclk4>;
- };
-};
-
-&adsp_pil {
- status = "okay";
- firmware-name = "qcom/apq8096/adsp.mbn";
-};
-
-&blsp2_i2c1 {
- /* On High speed expansion: HS-I2C2 */
- status = "okay";
-};
-
-&blsp2_i2c1 {
- /* On Low speed expansion: LS-I2C1 */
- status = "okay";
-};
-
-&blsp2_spi6 {
- /* On High speed expansion */
- status = "okay";
-};
-
-&blsp2_uart2 {
- label = "LS-UART1";
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_2pins_default>;
- pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
-};
-
-&blsp2_uart3 {
- label = "LS-UART0";
- status = "disabled";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart3_4pins_default>;
- pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
-};
-
-&camss {
- vdda-supply = <&vreg_l2a_1p25>;
-};
-
-&gpu {
- status = "okay";
-};
-
-&hsusb_phy1 {
- status = "okay";
-
- vdd-supply = <&vreg_l28a_0p925>;
- vdda-pll-supply = <&vreg_l12a_1p8>;
- vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-};
-
-&hsusb_phy2 {
- status = "okay";
-
- vdd-supply = <&vreg_l28a_0p925>;
- vdda-pll-supply = <&vreg_l12a_1p8>;
- vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-};
-
-&mdp {
- status = "okay";
-};
-
-&mdss {
- status = "okay";
-};
-
-&mdss_hdmi {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
- pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
-
- core-vdda-supply = <&vreg_l12a_1p8>;
- core-vcc-supply = <&vreg_s4a_1p8>;
-};
-
-&mdss_hdmi_phy {
- status = "okay";
-
- vddio-supply = <&vreg_l12a_1p8>;
- vcca-supply = <&vreg_l28a_0p925>;
- #phy-cells = <0>;
-};
-
-&mmcc {
- vdd-gfx-supply = <&vdd_gfx>;
-};
-
-&mss_pil {
- status = "okay";
- pll-supply = <&vreg_l12a_1p8>;
- firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn";
-};
-
-&pm8994_resin {
- status = "okay";
- linux,code = <KEY_VOLUMEDOWN>;
-};
-
-&tlmm {
- gpio-line-names =
- "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
- "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
- "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
- "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
- "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
- "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
- "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
- "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
- "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
- "TP93", /* GPIO_9 */
- "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
- "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
- "NC", /* GPIO_12 */
- "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
- "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
- "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
- "TP99", /* GPIO_16 */
- "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
- "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
- "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
- "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
- "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
- "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
- "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
- "GPIO-D", /* GPIO_24, LSEC pin 26 */
- "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
- "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
- "BLSP6_I2C_SDA", /* GPIO_27 */
- "BLSP6_I2C_SCL", /* GPIO_28 */
- "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
- "GPIO30", /* GPIO_30, S HSEC pin 4 */
- "HDMI_CEC", /* GPIO_31 */
- "HDMI_DDC_CLOCK", /* GPIO_32 */
- "HDMI_DDC_DATA", /* GPIO_33 */
- "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
- "PCIE0_RST_N", /* GPIO_35 */
- "PCIE0_CLKREQ_N", /* GPIO_36 */
- "PCIE0_WAKE", /* GPIO_37 */
- "SD_CARD_DET_N", /* GPIO_38 */
- "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
- "W_DISABLE_N", /* GPIO_40 */
- "[BLSP9_UART_TX]", /* GPIO_41 */
- "[BLSP9_UART_RX]", /* GPIO_42 */
- "[BLSP2_UART_CTS_N]", /* GPIO_43 */
- "[BLSP2_UART_RFR_N]", /* GPIO_44 */
- "[BLSP3_UART_TX]", /* GPIO_45 */
- "[BLSP3_UART_RX]", /* GPIO_46 */
- "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
- "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
- "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
- "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
- "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
- "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
- "[CODEC_INT1_N]", /* GPIO_53 */
- "[CODEC_INT2_N]", /* GPIO_54 */
- "[BLSP7_I2C_SDA]", /* GPIO_55 */
- "[BLSP7_I2C_SCL]", /* GPIO_56 */
- "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
- "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
- "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
- "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
- "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
- "GPIO-E", /* GPIO_62, LSEC pin 27 */
- "TP87", /* GPIO_63 */
- "[CODEC_RST_N]", /* GPIO_64 */
- "[PCM1_CLK]", /* GPIO_65 */
- "[PCM1_SYNC]", /* GPIO_66 */
- "[PCM1_DIN]", /* GPIO_67 */
- "[PCM1_DOUT]", /* GPIO_68 */
- "AUDIO_REF_CLK", /* GPIO_69 */
- "SLIMBUS_CLK", /* GPIO_70 */
- "SLIMBUS_DATA0", /* GPIO_71 */
- "SLIMBUS_DATA1", /* GPIO_72 */
- "NC", /* GPIO_73 */
- "NC", /* GPIO_74 */
- "NC", /* GPIO_75 */
- "NC", /* GPIO_76 */
- "TP94", /* GPIO_77 */
- "NC", /* GPIO_78 */
- "TP95", /* GPIO_79 */
- "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
- "TP88", /* GPIO_81 */
- "TP89", /* GPIO_82 */
- "TP90", /* GPIO_83 */
- "TP91", /* GPIO_84 */
- "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
- "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
- "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
- "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
- "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
- "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
- "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
- "NC", /* GPIO_92 */
- "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
- "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
- "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
- "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
- "NC", /* GPIO_97 */
- "CAM1_STANDBY_N", /* GPIO_98 */
- "NC", /* GPIO_99 */
- "NC", /* GPIO_100 */
- "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
- "BOOT_CONFIG1", /* GPIO_102 */
- "USB_HUB_RESET", /* GPIO_103 */
- "CAM1_RST_N", /* GPIO_104 */
- "NC", /* GPIO_105 */
- "NC", /* GPIO_106 */
- "NC", /* GPIO_107 */
- "NC", /* GPIO_108 */
- "NC", /* GPIO_109 */
- "NC", /* GPIO_110 */
- "NC", /* GPIO_111 */
- "NC", /* GPIO_112 */
- "PMI8994_BUA", /* GPIO_113 */
- "PCIE2_RST_N", /* GPIO_114 */
- "PCIE2_CLKREQ_N", /* GPIO_115 */
- "PCIE2_WAKE", /* GPIO_116 */
- "SSC_IRQ_0", /* GPIO_117 */
- "SSC_IRQ_1", /* GPIO_118 */
- "SSC_IRQ_2", /* GPIO_119 */
- "NC", /* GPIO_120 */
- "GPIO121", /* GPIO_121, S HSEC pin 2 */
- "NC", /* GPIO_122 */
- "SSC_IRQ_6", /* GPIO_123 */
- "SSC_IRQ_7", /* GPIO_124 */
- "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
- "BOOT_CONFIG5", /* GPIO_126 */
- "NC", /* GPIO_127 */
- "NC", /* GPIO_128 */
- "BOOT_CONFIG7", /* GPIO_129 */
- "PCIE1_RST_N", /* GPIO_130 */
- "PCIE1_CLKREQ_N", /* GPIO_131 */
- "PCIE1_WAKE", /* GPIO_132 */
- "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
- "NC", /* GPIO_134 */
- "NC", /* GPIO_135 */
- "BOOT_CONFIG8", /* GPIO_136 */
- "NC", /* GPIO_137 */
- "NC", /* GPIO_138 */
- "GPS_SSBI2", /* GPIO_139 */
- "GPS_SSBI1", /* GPIO_140 */
- "NC", /* GPIO_141 */
- "NC", /* GPIO_142 */
- "NC", /* GPIO_143 */
- "BOOT_CONFIG6", /* GPIO_144 */
- "NC", /* GPIO_145 */
- "NC", /* GPIO_146 */
- "NC", /* GPIO_147 */
- "NC", /* GPIO_148 */
- "NC"; /* GPIO_149 */
-
- sdc2_cd_on: sdc2-cd-on-state {
- pins = "gpio38";
- function = "gpio";
- bias-pull-up;
- drive-strength = <16>;
- };
-
- sdc2_cd_off: sdc2-cd-off-state {
- pins = "gpio38";
- function = "gpio";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- hdmi_hpd_active: hdmi-hpd-active-state {
- pins = "gpio34";
- function = "hdmi_hot";
- bias-pull-down;
- drive-strength = <16>;
- };
-
- hdmi_hpd_suspend: hdmi-hpd-suspend-state {
- pins = "gpio34";
- function = "hdmi_hot";
- bias-pull-down;
- drive-strength = <2>;
- };
-
- hdmi_ddc_active: hdmi-ddc-active-state {
- pins = "gpio32", "gpio33";
- function = "hdmi_ddc";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- hdmi_ddc_suspend: hdmi-ddc-suspend-state {
- pins = "gpio32", "gpio33";
- function = "hdmi_ddc";
- drive-strength = <2>;
- bias-pull-down;
- };
-};
-
-&pcie0 {
- status = "okay";
- perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
- vddpe-3v3-supply = <&wlan_en>;
- vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie1 {
- status = "okay";
- perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
- vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie2 {
- status = "okay";
- perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
- vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie_phy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l28a_0p925>;
- vdda-pll-supply = <&vreg_l12a_1p8>;
-};
-
-&pm8994_gpios {
- gpio-line-names =
- "NC",
- "KEY_VOLP_N",
- "NC",
- "BL1_PWM",
- "GPIO-F", /* BL0_PWM, LSEC pin 28 */
- "BL1_EN",
- "NC",
- "WLAN_EN",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "DIVCLK1",
- "DIVCLK2",
- "DIVCLK3",
- "DIVCLK4",
- "BT_EN",
- "PMIC_SLB",
- "PMIC_BUA",
- "USB_VBUS_DET";
-
- pinctrl-names = "default";
- pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
-
- ls_exp_gpio_f: pm8994-gpio5-state {
- pinconf {
- pins = "gpio5";
- function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
- power-source = <PM8994_GPIO_S4>; /* 1.8V */
- };
- };
-
- bt_en_gpios: bt-en-pios-state {
- pinconf {
- pins = "gpio19";
- function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
- power-source = <PM8994_GPIO_S4>; /* 1.8V */
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- bias-pull-down;
- };
- };
-
- wlan_en_gpios: wlan-en-gpios-state {
- pinconf {
- pins = "gpio8";
- function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
- power-source = <PM8994_GPIO_S4>; /* 1.8V */
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- bias-pull-down;
- };
- };
-
- audio_mclk: clk-div1-state {
- pinconf {
- pins = "gpio15";
- function = "func1";
- power-source = <PM8994_GPIO_S4>; /* 1.8V */
- };
- };
-
- volume_up_gpio: pm8996-gpio2-state {
- pinconf {
- pins = "gpio2";
- function = "normal";
- input-enable;
- drive-push-pull;
- bias-pull-up;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; /* 1.8V */
- };
- };
-
- divclk4_pin_a: divclk4-state {
- pinconf {
- pins = "gpio18";
- function = PMIC_GPIO_FUNC_FUNC2;
-
- bias-disable;
- power-source = <PM8994_GPIO_S4>;
- };
- };
-
- usb3_vbus_det_gpio: pm8996-gpio22-state {
- pinconf {
- pins = "gpio22";
- function = PMIC_GPIO_FUNC_NORMAL;
- input-enable;
- bias-pull-down;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; /* 1.8V */
- };
- };
-};
-
-&pm8994_mpps {
- gpio-line-names =
- "VDDPX_BIAS",
- "WIFI_LED",
- "NC",
- "BT_LED",
- "PM_MPP05",
- "PM_MPP06",
- "PM_MPP07",
- "NC";
-};
-
-&pm8994_spmi_regulators {
- qcom,saw-reg = <&saw3>;
- vdd_s11-supply = <&vph_pwr>;
-
- s9 {
- qcom,saw-slave;
- };
- s10 {
- qcom,saw-slave;
- };
- s11 {
- qcom,saw-leader;
- regulator-name = "VDD_APCC";
- regulator-always-on;
- regulator-min-microvolt = <980000>;
- regulator-max-microvolt = <980000>;
- };
-};
-
-&pmi8994_gpios {
- gpio-line-names =
- "NC",
- "SPKR_AMP_EN1",
- "SPKR_AMP_EN2",
- "TP61",
- "NC",
- "USB2_VBUS_DET",
- "NC",
- "NC",
- "NC",
- "NC";
-
- usb2_vbus_det_gpio: pmi8996-gpio6-state {
- pinconf {
- pins = "gpio6";
- function = PMIC_GPIO_FUNC_NORMAL;
- input-enable;
- bias-pull-down;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; /* 1.8V */
- };
- };
-};
-
-&pmi8994_lpg {
- qcom,power-source = <1>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pmi8994_mpp2_userled4>;
-
- qcom,dtest = <0 0>,
- <0 0>,
- <0 0>,
- <4 1>;
-
- status = "okay";
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_HEARTBEAT;
- function-enumerator = <1>;
-
- linux,default-trigger = "heartbeat";
- default-state = "on";
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_HEARTBEAT;
- function-enumerator = <0>;
- };
-
- led@3 {
- reg = <3>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_HEARTBEAT;
- function-enumerator = <2>;
- };
-
- led@4 {
- reg = <4>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_HEARTBEAT;
- function-enumerator = <3>;
- };
-};
-
-&pmi8994_mpps {
- pmi8994_mpp2_userled4: mpp2-userled4-state {
- pins = "mpp2";
- function = "sink";
-
- output-low;
- qcom,dtest = <4>;
- };
-};
-
-&pmi8994_spmi_regulators {
- vdd_s2-supply = <&vph_pwr>;
-
- vdd_gfx: s2 {
- regulator-name = "VDD_GFX";
- regulator-min-microvolt = <980000>;
- regulator-max-microvolt = <980000>;
- };
-};
-
-&rpm_requests {
- regulators-0 {
- compatible = "qcom,rpm-pm8994-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
- vdd_s2-supply = <&vph_pwr>;
- vdd_s3-supply = <&vph_pwr>;
- vdd_s4-supply = <&vph_pwr>;
- vdd_s5-supply = <&vph_pwr>;
- vdd_s6-supply = <&vph_pwr>;
- vdd_s7-supply = <&vph_pwr>;
- vdd_s8-supply = <&vph_pwr>;
- vdd_s9-supply = <&vph_pwr>;
- vdd_s10-supply = <&vph_pwr>;
- vdd_s11-supply = <&vph_pwr>;
- vdd_s12-supply = <&vph_pwr>;
- vdd_l1-supply = <&vreg_s1b_1p025>;
- vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
- vdd_l3_l11-supply = <&vreg_s3a_1p3>;
- vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
- vdd_l5_l7-supply = <&vreg_s5a_2p15>;
- vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
- vdd_l8_l16_l30-supply = <&vph_pwr>;
- vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
- vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
- vdd_l14_l15-supply = <&vreg_s5a_2p15>;
- vdd_l17_l29-supply = <&vph_pwr_bbyp>;
- vdd_l20_l21-supply = <&vph_pwr_bbyp>;
- vdd_l25-supply = <&vreg_s3a_1p3>;
- vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
-
- vreg_s3a_1p3: s3 {
- regulator-name = "vreg_s3a_1p3";
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- /**
- * 1.8v required on LS expansion
- * for mezzanine boards
- */
- vreg_s4a_1p8: s4 {
- regulator-name = "vreg_s4a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
- vreg_s5a_2p15: s5 {
- regulator-name = "vreg_s5a_2p15";
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- };
- vreg_s7a_1p0: s7 {
- regulator-name = "vreg_s7a_1p0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- };
-
- vreg_l1a_1p0: l1 {
- regulator-name = "vreg_l1a_1p0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
- vreg_l2a_1p25: l2 {
- regulator-name = "vreg_l2a_1p25";
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- };
- vreg_l3a_0p875: l3 {
- regulator-name = "vreg_l3a_0p875";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- };
- vreg_l4a_1p225: l4 {
- regulator-name = "vreg_l4a_1p225";
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
- vreg_l6a_1p2: l6 {
- regulator-name = "vreg_l6a_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
- vreg_l8a_1p8: l8 {
- regulator-name = "vreg_l8a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l9a_1p8: l9 {
- regulator-name = "vreg_l9a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l10a_1p8: l10 {
- regulator-name = "vreg_l10a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l11a_1p15: l11 {
- regulator-name = "vreg_l11a_1p15";
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
- };
- vreg_l12a_1p8: l12 {
- regulator-name = "vreg_l12a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l13a_2p95: l13 {
- regulator-name = "vreg_l13a_2p95";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
- vreg_l14a_1p8: l14 {
- regulator-name = "vreg_l14a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l15a_1p8: l15 {
- regulator-name = "vreg_l15a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l16a_2p7: l16 {
- regulator-name = "vreg_l16a_2p7";
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
- vreg_l17a_2p8: l17 {
- regulator-name = "vreg_l17a_2p8";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- };
- vreg_l18a_2p85: l18 {
- regulator-name = "vreg_l18a_2p85";
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2900000>;
- };
- vreg_l19a_2p8: l19 {
- regulator-name = "vreg_l19a_2p8";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
- vreg_l20a_2p95: l20 {
- regulator-name = "vreg_l20a_2p95";
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- };
- vreg_l21a_2p95: l21 {
- regulator-name = "vreg_l21a_2p95";
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
- vreg_l22a_3p0: l22 {
- regulator-name = "vreg_l22a_3p0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
- vreg_l23a_2p8: l23 {
- regulator-name = "vreg_l23a_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- vreg_l24a_3p075: l24 {
- regulator-name = "vreg_l24a_3p075";
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
- vreg_l25a_1p2: l25 {
- regulator-name = "vreg_l25a_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-allow-set-load;
- };
- vreg_l26a_0p8: l27 {
- regulator-name = "vreg_l26a_0p8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
- vreg_l28a_0p925: l28 {
- regulator-name = "vreg_l28a_0p925";
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <925000>;
- regulator-allow-set-load;
- };
- vreg_l29a_2p8: l29 {
- regulator-name = "vreg_l29a_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- vreg_l30a_1p8: l30 {
- regulator-name = "vreg_l30a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l32a_1p8: l32 {
- regulator-name = "vreg_l32a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vreg_lvs1a_1p8: lvs1 {
- regulator-name = "vreg_lvs1a_1p8";
- };
-
- vreg_lvs2a_1p8: lvs2 {
- regulator-name = "vreg_lvs2a_1p8";
- };
- };
-
- regulators-1 {
- compatible = "qcom,rpm-pmi8994-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
- vdd_s2-supply = <&vph_pwr>;
- vdd_s3-supply = <&vph_pwr>;
- vdd_bst_byp-supply = <&vph_pwr>;
-
- vph_pwr_bbyp: boost-bypass {
- regulator-name = "vph_pwr_bbyp";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vreg_s1b_1p025: s1 {
- regulator-name = "vreg_s1b_1p025";
- regulator-min-microvolt = <1025000>;
- regulator-max-microvolt = <1025000>;
- };
- };
-};
-
-&sdhc2 {
- /* External SD card */
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
- cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vreg_l21a_2p95>;
- vqmmc-supply = <&vreg_l13a_2p95>;
- status = "okay";
-};
-
-&q6asmdai {
- dai@0 {
- reg = <0>;
- };
-
- dai@1 {
- reg = <1>;
- };
-
- dai@2 {
- reg = <2>;
- };
-};
-
-&slim_msm {
- status = "okay";
-
- slim@1 {
- reg = <1>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- tasha_ifd: tas-ifd@0,0 {
- compatible = "slim217,1a0";
- reg = <0 0>;
- };
-
- wcd9335: codec@1,0 {
- compatible = "slim217,1a0";
- reg = <1 0>;
-
- clock-names = "mclk", "slimbus";
- clocks = <&div1_mclk>,
- <&rpmcc RPM_SMD_BB_CLK1>;
- interrupt-parent = <&tlmm>;
- interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
- <53 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "intr1", "intr2";
- interrupt-controller;
- #interrupt-cells = <1>;
-
- pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
- pinctrl-names = "default";
-
- reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
- slim-ifc-dev = <&tasha_ifd>;
-
- #sound-dai-cells = <1>;
-
- vdd-buck-supply = <&vreg_s4a_1p8>;
- vdd-buck-sido-supply = <&vreg_s4a_1p8>;
- vdd-tx-supply = <&vreg_s4a_1p8>;
- vdd-rx-supply = <&vreg_s4a_1p8>;
- vdd-io-supply = <&vreg_s4a_1p8>;
- };
- };
-};
-
-&sound {
- compatible = "qcom,apq8096-sndcard";
- model = "DB820c";
- audio-routing = "RX_BIAS", "MCLK",
- "MM_DL1", "MultiMedia1 Playback",
- "MM_DL2", "MultiMedia2 Playback",
- "MultiMedia3 Capture", "MM_UL3";
-
- mm1-dai-link {
- link-name = "MultiMedia1";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
- };
- };
-
- mm2-dai-link {
- link-name = "MultiMedia2";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
- };
- };
-
- mm3-dai-link {
- link-name = "MultiMedia3";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
- };
- };
-
- hdmi-dai-link {
- link-name = "HDMI";
- cpu {
- sound-dai = <&q6afedai HDMI_RX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&mdss_hdmi 0>;
- };
- };
-
- slim-dai-link {
- link-name = "SLIM Playback";
- cpu {
- sound-dai = <&q6afedai SLIMBUS_6_RX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&wcd9335 AIF4_PB>;
- };
- };
-
- slimcap-dai-link {
- link-name = "SLIM Capture";
- cpu {
- sound-dai = <&q6afedai SLIMBUS_0_TX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&wcd9335 AIF1_CAP>;
- };
- };
-};
-
-&ufsphy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l28a_0p925>;
- vdda-pll-supply = <&vreg_l12a_1p8>;
-};
-
-&ufshc {
- status = "okay";
-
- vcc-supply = <&vreg_l20a_2p95>;
- vccq-supply = <&vreg_l25a_1p2>;
- vccq2-supply = <&vreg_s4a_1p8>;
- vdd-hba-supply = <&vreg_l25a_1p2>;
-
- vcc-max-microamp = <600000>;
- vccq-max-microamp = <450000>;
- vccq2-max-microamp = <450000>;
-};
-
-&usb2 {
- status = "okay";
- extcon = <&usb2_id>;
-};
-
-&usb2_dwc3 {
- extcon = <&usb2_id>;
- dr_mode = "otg";
- maximum-speed = "high-speed";
-};
-
-&usb3 {
- status = "okay";
- extcon = <&usb3_id>;
-};
-
-&usb3_dwc3 {
- extcon = <&usb3_id>;
- dr_mode = "otg";
-};
-
-&usb3phy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l28a_0p925>;
- vdda-pll-supply = <&vreg_l12a_1p8>;
-};
-
-&venus {
- status = "okay";
-};
deleted file mode 100644
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * msm8916-pm8916.dtsi describes common properties (e.g. regulator connections)
- * that apply to most devices that make use of the MSM8916 SoC and PM8916 PMIC.
- * Many regulators have a fixed purpose in the original reference design and
- * were rarely re-used for different purposes. Devices that deviate from the
- * typical reference design should not make use of this include and instead add
- * the necessary properties in the board-specific device tree.
- */
-
-#include "msm8916.dtsi"
-#include "pm8916.dtsi"
-
-&camss {
- vdda-supply = <&pm8916_l2>;
-};
-
-&mdss_dsi0 {
- vdda-supply = <&pm8916_l2>;
- vddio-supply = <&pm8916_l6>;
-};
-
-&mdss_dsi0_phy {
- vddio-supply = <&pm8916_l6>;
-};
-
-&mpss {
- pll-supply = <&pm8916_l7>;
-};
-
-&pm8916_codec {
- vdd-cdc-io-supply = <&pm8916_l5>;
- vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
- vdd-micbias-supply = <&pm8916_l13>;
-};
-
-&sdhc_1 {
- vmmc-supply = <&pm8916_l8>;
- vqmmc-supply = <&pm8916_l5>;
-};
-
-&sdhc_2 {
- vmmc-supply = <&pm8916_l11>;
- vqmmc-supply = <&pm8916_l12>;
-};
-
-&usb_hs_phy {
- v1p8-supply = <&pm8916_l7>;
- v3p3-supply = <&pm8916_l13>;
-};
-
-&wcnss {
- vddpx-supply = <&pm8916_l7>;
-};
-
-&wcnss_iris {
- vddxo-supply = <&pm8916_l7>;
- vddrfa-supply = <&pm8916_s3>;
- vddpa-supply = <&pm8916_l9>;
- vdddig-supply = <&pm8916_l5>;
-};
-
-&rpm_requests {
- pm8916_rpm_regulators: regulators {
- compatible = "qcom,rpm-pm8916-regulators";
- vdd_l1_l2_l3-supply = <&pm8916_s3>;
- vdd_l4_l5_l6-supply = <&pm8916_s4>;
- vdd_l7-supply = <&pm8916_s4>;
-
- /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
-
- pm8916_s3: s3 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on; /* Needed for L2 */
- };
-
- pm8916_s4: s4 {
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <2150000>;
- regulator-always-on; /* Needed for L5/L7 */
- };
-
- /*
- * Some of the regulators are unused or managed by another
- * processor (e.g. the modem). We should still define nodes for
- * them to ensure the vote from the application processor can be
- * dropped in case the regulators are already on during boot.
- *
- * The labels for these nodes are omitted on purpose because
- * boards should configure a proper voltage before using them.
- */
- l1 {};
-
- pm8916_l2: l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on; /* Needed for LPDDR RAM */
- };
-
- /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */
-
- l4 {};
-
- pm8916_l5: l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on; /* Needed for most digital I/O */
- };
-
- pm8916_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8916_l7: l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on; /* Needed for CPU PLL */
- };
-
- pm8916_l8: l8 {
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
- };
-
- pm8916_l9: l9 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l10 {};
-
- pm8916_l11: l11 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
-
- pm8916_l12: l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pm8916_l13: l13 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
-
- l14 {};
- l15 {};
- l16 {};
- l17 {};
- l18 {};
- };
-};
deleted file mode 100644
@@ -1,2702 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
- */
-
-#include <dt-bindings/arm/coresight-cti-dt.h>
-#include <dt-bindings/clock/qcom,gcc-msm8916.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/interconnect/qcom,msm8916.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/reset/qcom,gcc-msm8916.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- interrupt-parent = <&intc>;
-
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- memory@80000000 {
- device_type = "memory";
- /* We expect the bootloader to fill in the reg */
- reg = <0 0x80000000 0 0>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- tz-apps@86000000 {
- reg = <0x0 0x86000000 0x0 0x300000>;
- no-map;
- };
-
- smem@86300000 {
- compatible = "qcom,smem";
- reg = <0x0 0x86300000 0x0 0x100000>;
- no-map;
-
- hwlocks = <&tcsr_mutex 3>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- };
-
- hypervisor@86400000 {
- reg = <0x0 0x86400000 0x0 0x100000>;
- no-map;
- };
-
- tz@86500000 {
- reg = <0x0 0x86500000 0x0 0x180000>;
- no-map;
- };
-
- reserved@86680000 {
- reg = <0x0 0x86680000 0x0 0x80000>;
- no-map;
- };
-
- rmtfs@86700000 {
- compatible = "qcom,rmtfs-mem";
- reg = <0x0 0x86700000 0x0 0xe0000>;
- no-map;
-
- qcom,client-id = <1>;
- };
-
- rfsa@867e0000 {
- reg = <0x0 0x867e0000 0x0 0x20000>;
- no-map;
- };
-
- mpss_mem: mpss@86800000 {
- /*
- * The memory region for the mpss firmware is generally
- * relocatable and could be allocated dynamically.
- * However, many firmware versions tend to fail when
- * loaded to some special addresses, so it is hard to
- * define reliable alloc-ranges.
- *
- * alignment = <0x0 0x400000>;
- * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
- */
- reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */
- no-map;
- status = "disabled";
- };
-
- wcnss_mem: wcnss {
- size = <0x0 0x600000>;
- alignment = <0x0 0x100000>;
- alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
- no-map;
- status = "disabled";
- };
-
- venus_mem: venus {
- size = <0x0 0x500000>;
- alignment = <0x0 0x100000>;
- alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
- no-map;
- status = "disabled";
- };
-
- mba_mem: mba {
- size = <0x0 0x100000>;
- alignment = <0x0 0x100000>;
- alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
- no-map;
- status = "disabled";
- };
- };
-
- clocks {
- xo_board: xo-board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- };
-
- sleep_clk: sleep-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- clocks = <&apcs>;
- operating-points-v2 = <&cpu_opp_table>;
- #cooling-cells = <2>;
- power-domains = <&CPU_PD0>;
- power-domain-names = "psci";
- qcom,acc = <&cpu0_acc>;
- qcom,saw = <&cpu0_saw>;
- };
-
- CPU1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- clocks = <&apcs>;
- operating-points-v2 = <&cpu_opp_table>;
- #cooling-cells = <2>;
- power-domains = <&CPU_PD1>;
- power-domain-names = "psci";
- qcom,acc = <&cpu1_acc>;
- qcom,saw = <&cpu1_saw>;
- };
-
- CPU2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- clocks = <&apcs>;
- operating-points-v2 = <&cpu_opp_table>;
- #cooling-cells = <2>;
- power-domains = <&CPU_PD2>;
- power-domain-names = "psci";
- qcom,acc = <&cpu2_acc>;
- qcom,saw = <&cpu2_saw>;
- };
-
- CPU3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- clocks = <&apcs>;
- operating-points-v2 = <&cpu_opp_table>;
- #cooling-cells = <2>;
- power-domains = <&CPU_PD3>;
- power-domain-names = "psci";
- qcom,acc = <&cpu3_acc>;
- qcom,saw = <&cpu3_saw>;
- };
-
- L2_0: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- };
-
- idle-states {
- entry-method = "psci";
-
- CPU_SLEEP_0: cpu-sleep-0 {
- compatible = "arm,idle-state";
- idle-state-name = "standalone-power-collapse";
- arm,psci-suspend-param = <0x40000002>;
- entry-latency-us = <130>;
- exit-latency-us = <150>;
- min-residency-us = <2000>;
- local-timer-stop;
- };
- };
-
- domain-idle-states {
-
- CLUSTER_RET: cluster-retention {
- compatible = "domain-idle-state";
- arm,psci-suspend-param = <0x41000012>;
- entry-latency-us = <500>;
- exit-latency-us = <500>;
- min-residency-us = <2000>;
- };
-
- CLUSTER_PWRDN: cluster-gdhs {
- compatible = "domain-idle-state";
- arm,psci-suspend-param = <0x41000032>;
- entry-latency-us = <2000>;
- exit-latency-us = <2000>;
- min-residency-us = <6000>;
- };
- };
- };
-
- cpu_opp_table: opp-table-cpu {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- };
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- };
- opp-800000000 {
- opp-hz = /bits/ 64 <800000000>;
- };
- opp-998400000 {
- opp-hz = /bits/ 64 <998400000>;
- };
- };
-
- firmware {
- scm: scm {
- compatible = "qcom,scm-msm8916", "qcom,scm";
- clocks = <&gcc GCC_CRYPTO_CLK>,
- <&gcc GCC_CRYPTO_AXI_CLK>,
- <&gcc GCC_CRYPTO_AHB_CLK>;
- clock-names = "core", "bus", "iface";
- #reset-cells = <1>;
-
- qcom,dload-mode = <&tcsr 0x6100>;
- };
- };
-
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
-
- CPU_PD0: power-domain-cpu0 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&CPU_SLEEP_0>;
- };
-
- CPU_PD1: power-domain-cpu1 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&CPU_SLEEP_0>;
- };
-
- CPU_PD2: power-domain-cpu2 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&CPU_SLEEP_0>;
- };
-
- CPU_PD3: power-domain-cpu3 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&CPU_SLEEP_0>;
- };
-
- CLUSTER_PD: power-domain-cluster {
- #power-domain-cells = <0>;
- domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
- };
- };
-
- rpm: remoteproc {
- compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
-
- smd-edge {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8916";
- qcom,smd-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
- #clock-cells = <1>;
- clocks = <&xo_board>;
- clock-names = "xo";
- };
-
- rpmpd: power-controller {
- compatible = "qcom,msm8916-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <1>;
- };
- rpmpd_opp_svs_krait: opp2 {
- opp-level = <2>;
- };
- rpmpd_opp_svs_soc: opp3 {
- opp-level = <3>;
- };
- rpmpd_opp_nom: opp4 {
- opp-level = <4>;
- };
- rpmpd_opp_turbo: opp5 {
- opp-level = <5>;
- };
- rpmpd_opp_super_turbo: opp6 {
- opp-level = <6>;
- };
- };
- };
- };
- };
- };
-
- smp2p-hexagon {
- compatible = "qcom,smp2p";
- qcom,smem = <435>, <428>;
-
- interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 14>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <1>;
-
- hexagon_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
-
- #qcom,smem-state-cells = <1>;
- };
-
- hexagon_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- smp2p-wcnss {
- compatible = "qcom,smp2p";
- qcom,smem = <451>, <431>;
-
- interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 18>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <4>;
-
- wcnss_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
-
- #qcom,smem-state-cells = <1>;
- };
-
- wcnss_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- smsm {
- compatible = "qcom,smsm";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- qcom,ipc-1 = <&apcs 8 13>;
- qcom,ipc-3 = <&apcs 8 19>;
-
- apps_smsm: apps@0 {
- reg = <0>;
-
- #qcom,smem-state-cells = <1>;
- };
-
- hexagon_smsm: hexagon@1 {
- reg = <1>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- wcnss_smsm: wcnss@6 {
- reg = <6>;
- interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- soc: soc@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
- compatible = "simple-bus";
-
- rng@22000 {
- compatible = "qcom,prng";
- reg = <0x00022000 0x200>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "core";
- };
-
- restart@4ab000 {
- compatible = "qcom,pshold";
- reg = <0x004ab000 0x4>;
- };
-
- qfprom: qfprom@5c000 {
- compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
- reg = <0x0005c000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- tsens_base1: base1@d0 {
- reg = <0xd0 0x1>;
- bits = <0 7>;
- };
-
- tsens_s0_p1: s0-p1@d0 {
- reg = <0xd0 0x2>;
- bits = <7 5>;
- };
-
- tsens_s0_p2: s0-p2@d1 {
- reg = <0xd1 0x2>;
- bits = <4 5>;
- };
-
- tsens_s1_p1: s1-p1@d2 {
- reg = <0xd2 0x1>;
- bits = <1 5>;
- };
- tsens_s1_p2: s1-p2@d2 {
- reg = <0xd2 0x2>;
- bits = <6 5>;
- };
- tsens_s2_p1: s2-p1@d3 {
- reg = <0xd3 0x1>;
- bits = <3 5>;
- };
-
- tsens_s2_p2: s2-p2@d4 {
- reg = <0xd4 0x1>;
- bits = <0 5>;
- };
-
- // no tsens with hw_id 3
-
- tsens_s4_p1: s4-p1@d4 {
- reg = <0xd4 0x2>;
- bits = <5 5>;
- };
-
- tsens_s4_p2: s4-p2@d5 {
- reg = <0xd5 0x1>;
- bits = <2 5>;
- };
-
- tsens_s5_p1: s5-p1@d5 {
- reg = <0xd5 0x2>;
- bits = <7 5>;
- };
-
- tsens_s5_p2: s5-p2@d6 {
- reg = <0xd6 0x2>;
- bits = <4 5>;
- };
-
- tsens_base2: base2@d7 {
- reg = <0xd7 0x1>;
- bits = <1 7>;
- };
-
- tsens_mode: mode@ef {
- reg = <0xef 0x1>;
- bits = <5 3>;
- };
- };
-
- rpm_msg_ram: sram@60000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0x00060000 0x8000>;
- };
-
- sram@290000 {
- compatible = "qcom,msm8916-rpm-stats";
- reg = <0x00290000 0x10000>;
- };
-
- bimc: interconnect@400000 {
- compatible = "qcom,msm8916-bimc";
- reg = <0x00400000 0x62000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
- };
-
- tsens: thermal-sensor@4a9000 {
- compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
- reg = <0x004a9000 0x1000>, /* TM */
- <0x004a8000 0x1000>; /* SROT */
-
- // no hw_id 3
- nvmem-cells = <&tsens_mode>,
- <&tsens_base1>, <&tsens_base2>,
- <&tsens_s0_p1>, <&tsens_s0_p2>,
- <&tsens_s1_p1>, <&tsens_s1_p2>,
- <&tsens_s2_p1>, <&tsens_s2_p2>,
- <&tsens_s4_p1>, <&tsens_s4_p2>,
- <&tsens_s5_p1>, <&tsens_s5_p2>;
- nvmem-cell-names = "mode",
- "base1", "base2",
- "s0_p1", "s0_p2",
- "s1_p1", "s1_p2",
- "s2_p1", "s2_p2",
- "s4_p1", "s4_p2",
- "s5_p1", "s5_p2";
- #qcom,sensors = <5>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
- #thermal-sensor-cells = <1>;
- };
-
- pcnoc: interconnect@500000 {
- compatible = "qcom,msm8916-pcnoc";
- reg = <0x00500000 0x11000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
- <&rpmcc RPM_SMD_PCNOC_A_CLK>;
- };
-
- snoc: interconnect@580000 {
- compatible = "qcom,msm8916-snoc";
- reg = <0x00580000 0x14000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
- };
-
- stm: stm@802000 {
- compatible = "arm,coresight-stm", "arm,primecell";
- reg = <0x00802000 0x1000>,
- <0x09280000 0x180000>;
- reg-names = "stm-base", "stm-stimulus-base";
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- out-ports {
- port {
- stm_out: endpoint {
- remote-endpoint = <&funnel0_in7>;
- };
- };
- };
- };
-
- /* System CTIs */
- /* CTI 0 - TMC connections */
- cti0: cti@810000 {
- compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x00810000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- status = "disabled";
- };
-
- /* CTI 1 - TPIU connections */
- cti1: cti@811000 {
- compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x00811000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- status = "disabled";
- };
-
- /* CTIs 2-11 - no information - not instantiated */
-
- tpiu: tpiu@820000 {
- compatible = "arm,coresight-tpiu", "arm,primecell";
- reg = <0x00820000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- port {
- tpiu_in: endpoint {
- remote-endpoint = <&replicator_out1>;
- };
- };
- };
- };
-
- funnel0: funnel@821000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x00821000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /*
- * Not described input ports:
- * 0 - connected to Resource and Power Manger CPU ETM
- * 1 - not-connected
- * 2 - connected to Modem CPU ETM
- * 3 - not-connected
- * 5 - not-connected
- * 6 - connected trought funnel to Wireless CPU ETM
- * 7 - connected to STM component
- */
-
- port@4 {
- reg = <4>;
- funnel0_in4: endpoint {
- remote-endpoint = <&funnel1_out>;
- };
- };
-
- port@7 {
- reg = <7>;
- funnel0_in7: endpoint {
- remote-endpoint = <&stm_out>;
- };
- };
- };
-
- out-ports {
- port {
- funnel0_out: endpoint {
- remote-endpoint = <&etf_in>;
- };
- };
- };
- };
-
- replicator: replicator@824000 {
- compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
- reg = <0x00824000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- replicator_out0: endpoint {
- remote-endpoint = <&etr_in>;
- };
- };
- port@1 {
- reg = <1>;
- replicator_out1: endpoint {
- remote-endpoint = <&tpiu_in>;
- };
- };
- };
-
- in-ports {
- port {
- replicator_in: endpoint {
- remote-endpoint = <&etf_out>;
- };
- };
- };
- };
-
- etf: etf@825000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x00825000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- port {
- etf_in: endpoint {
- remote-endpoint = <&funnel0_out>;
- };
- };
- };
-
- out-ports {
- port {
- etf_out: endpoint {
- remote-endpoint = <&replicator_in>;
- };
- };
- };
- };
-
- etr: etr@826000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x00826000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- port {
- etr_in: endpoint {
- remote-endpoint = <&replicator_out0>;
- };
- };
- };
- };
-
- funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x00841000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- status = "disabled";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- funnel1_in0: endpoint {
- remote-endpoint = <&etm0_out>;
- };
- };
- port@1 {
- reg = <1>;
- funnel1_in1: endpoint {
- remote-endpoint = <&etm1_out>;
- };
- };
- port@2 {
- reg = <2>;
- funnel1_in2: endpoint {
- remote-endpoint = <&etm2_out>;
- };
- };
- port@3 {
- reg = <3>;
- funnel1_in3: endpoint {
- remote-endpoint = <&etm3_out>;
- };
- };
- };
-
- out-ports {
- port {
- funnel1_out: endpoint {
- remote-endpoint = <&funnel0_in4>;
- };
- };
- };
- };
-
- debug0: debug@850000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x00850000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU0>;
- status = "disabled";
- };
-
- debug1: debug@852000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x00852000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU1>;
- status = "disabled";
- };
-
- debug2: debug@854000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x00854000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU2>;
- status = "disabled";
- };
-
- debug3: debug@856000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x00856000 0x1000>;
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
- cpu = <&CPU3>;
- status = "disabled";
- };
-
- /* Core CTIs; CTIs 12-15 */
- /* CTI - CPU-0 */
- cti12: cti@858000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x00858000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU0>;
- arm,cs-dev-assoc = <&etm0>;
-
- status = "disabled";
- };
-
- /* CTI - CPU-1 */
- cti13: cti@859000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x00859000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU1>;
- arm,cs-dev-assoc = <&etm1>;
-
- status = "disabled";
- };
-
- /* CTI - CPU-2 */
- cti14: cti@85a000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x0085a000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU2>;
- arm,cs-dev-assoc = <&etm2>;
-
- status = "disabled";
- };
-
- /* CTI - CPU-3 */
- cti15: cti@85b000 {
- compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
- "arm,primecell";
- reg = <0x0085b000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU3>;
- arm,cs-dev-assoc = <&etm3>;
-
- status = "disabled";
- };
-
- etm0: etm@85c000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x0085c000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU0>;
-
- status = "disabled";
-
- out-ports {
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel1_in0>;
- };
- };
- };
- };
-
- etm1: etm@85d000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x0085d000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU1>;
-
- status = "disabled";
-
- out-ports {
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel1_in1>;
- };
- };
- };
- };
-
- etm2: etm@85e000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x0085e000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU2>;
-
- status = "disabled";
-
- out-ports {
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel1_in2>;
- };
- };
- };
- };
-
- etm3: etm@85f000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x0085f000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,coresight-loses-context-with-cpu;
-
- cpu = <&CPU3>;
-
- status = "disabled";
-
- out-ports {
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel1_in3>;
- };
- };
- };
- };
-
- tlmm: pinctrl@1000000 {
- compatible = "qcom,msm8916-pinctrl";
- reg = <0x01000000 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- gpio-ranges = <&tlmm 0 0 122>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- blsp_i2c1_default: blsp-i2c1-default-state {
- pins = "gpio2", "gpio3";
- function = "blsp_i2c1";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_i2c1_sleep: blsp-i2c1-sleep-state {
- pins = "gpio2", "gpio3";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_i2c2_default: blsp-i2c2-default-state {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_i2c2_sleep: blsp-i2c2-sleep-state {
- pins = "gpio6", "gpio7";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_i2c3_default: blsp-i2c3-default-state {
- pins = "gpio10", "gpio11";
- function = "blsp_i2c3";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_i2c3_sleep: blsp-i2c3-sleep-state {
- pins = "gpio10", "gpio11";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_i2c4_default: blsp-i2c4-default-state {
- pins = "gpio14", "gpio15";
- function = "blsp_i2c4";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_i2c4_sleep: blsp-i2c4-sleep-state {
- pins = "gpio14", "gpio15";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_i2c5_default: blsp-i2c5-default-state {
- pins = "gpio18", "gpio19";
- function = "blsp_i2c5";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_i2c5_sleep: blsp-i2c5-sleep-state {
- pins = "gpio18", "gpio19";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_i2c6_default: blsp-i2c6-default-state {
- pins = "gpio22", "gpio23";
- function = "blsp_i2c6";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_i2c6_sleep: blsp-i2c6-sleep-state {
- pins = "gpio22", "gpio23";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp_spi1_default: blsp-spi1-default-state {
- spi-pins {
- pins = "gpio0", "gpio1", "gpio3";
- function = "blsp_spi1";
- drive-strength = <12>;
- bias-disable;
- };
- cs-pins {
- pins = "gpio2";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp_spi1_sleep: blsp-spi1-sleep-state {
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp_spi2_default: blsp-spi2-default-state {
- spi-pins {
- pins = "gpio4", "gpio5", "gpio7";
- function = "blsp_spi2";
- drive-strength = <12>;
- bias-disable;
- };
- cs-pins {
- pins = "gpio6";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp_spi2_sleep: blsp-spi2-sleep-state {
- pins = "gpio4", "gpio5", "gpio6", "gpio7";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp_spi3_default: blsp-spi3-default-state {
- spi-pins {
- pins = "gpio8", "gpio9", "gpio11";
- function = "blsp_spi3";
- drive-strength = <12>;
- bias-disable;
- };
- cs-pins {
- pins = "gpio10";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp_spi3_sleep: blsp-spi3-sleep-state {
- pins = "gpio8", "gpio9", "gpio10", "gpio11";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp_spi4_default: blsp-spi4-default-state {
- spi-pins {
- pins = "gpio12", "gpio13", "gpio15";
- function = "blsp_spi4";
- drive-strength = <12>;
- bias-disable;
- };
- cs-pins {
- pins = "gpio14";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp_spi4_sleep: blsp-spi4-sleep-state {
- pins = "gpio12", "gpio13", "gpio14", "gpio15";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp_spi5_default: blsp-spi5-default-state {
- spi-pins {
- pins = "gpio16", "gpio17", "gpio19";
- function = "blsp_spi5";
- drive-strength = <12>;
- bias-disable;
- };
- cs-pins {
- pins = "gpio18";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp_spi5_sleep: blsp-spi5-sleep-state {
- pins = "gpio16", "gpio17", "gpio18", "gpio19";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp_spi6_default: blsp-spi6-default-state {
- spi-pins {
- pins = "gpio20", "gpio21", "gpio23";
- function = "blsp_spi6";
- drive-strength = <12>;
- bias-disable;
- };
- cs-pins {
- pins = "gpio22";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp_spi6_sleep: blsp-spi6-sleep-state {
- pins = "gpio20", "gpio21", "gpio22", "gpio23";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp_uart1_default: blsp-uart1-default-state {
- /* TX, RX, CTS_N, RTS_N */
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- function = "blsp_uart1";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp_uart1_sleep: blsp-uart1-sleep-state {
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp_uart2_default: blsp-uart2-default-state {
- pins = "gpio4", "gpio5";
- function = "blsp_uart2";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp_uart2_sleep: blsp-uart2-sleep-state {
- pins = "gpio4", "gpio5";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- camera_front_default: camera-front-default-state {
- pwdn-pins {
- pins = "gpio33";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
- rst-pins {
- pins = "gpio28";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
- mclk1-pins {
- pins = "gpio27";
- function = "cam_mclk1";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- camera_rear_default: camera-rear-default-state {
- pwdn-pins {
- pins = "gpio34";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
- rst-pins {
- pins = "gpio35";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
- mclk0-pins {
- pins = "gpio26";
- function = "cam_mclk0";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- cci0_default: cci0-default-state {
- pins = "gpio29", "gpio30";
- function = "cci_i2c";
- drive-strength = <16>;
- bias-disable;
- };
-
- cdc_dmic_default: cdc-dmic-default-state {
- clk-pins {
- pins = "gpio0";
- function = "dmic0_clk";
- drive-strength = <8>;
- };
- data-pins {
- pins = "gpio1";
- function = "dmic0_data";
- drive-strength = <8>;
- };
- };
-
- cdc_dmic_sleep: cdc-dmic-sleep-state {
- clk-pins {
- pins = "gpio0";
- function = "dmic0_clk";
- drive-strength = <2>;
- bias-disable;
- };
- data-pins {
- pins = "gpio1";
- function = "dmic0_data";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- cdc_pdm_default: cdc-pdm-default-state {
- pins = "gpio63", "gpio64", "gpio65", "gpio66",
- "gpio67", "gpio68";
- function = "cdc_pdm0";
- drive-strength = <8>;
- bias-disable;
- };
-
- cdc_pdm_sleep: cdc-pdm-sleep-state {
- pins = "gpio63", "gpio64", "gpio65", "gpio66",
- "gpio67", "gpio68";
- function = "cdc_pdm0";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- pri_mi2s_default: mi2s-pri-default-state {
- pins = "gpio113", "gpio114", "gpio115", "gpio116";
- function = "pri_mi2s";
- drive-strength = <8>;
- bias-disable;
- };
-
- pri_mi2s_sleep: mi2s-pri-sleep-state {
- pins = "gpio113", "gpio114", "gpio115", "gpio116";
- function = "pri_mi2s";
- drive-strength = <2>;
- bias-disable;
- };
-
- pri_mi2s_mclk_default: mi2s-pri-mclk-default-state {
- pins = "gpio116";
- function = "pri_mi2s";
- drive-strength = <8>;
- bias-disable;
- };
-
- pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state {
- pins = "gpio116";
- function = "pri_mi2s";
- drive-strength = <2>;
- bias-disable;
- };
-
- pri_mi2s_ws_default: mi2s-pri-ws-default-state {
- pins = "gpio110";
- function = "pri_mi2s_ws";
- drive-strength = <8>;
- bias-disable;
- };
-
- pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state {
- pins = "gpio110";
- function = "pri_mi2s_ws";
- drive-strength = <2>;
- bias-disable;
- };
-
- sec_mi2s_default: mi2s-sec-default-state {
- pins = "gpio112", "gpio117", "gpio118", "gpio119";
- function = "sec_mi2s";
- drive-strength = <8>;
- bias-disable;
- };
-
- sec_mi2s_sleep: mi2s-sec-sleep-state {
- pins = "gpio112", "gpio117", "gpio118", "gpio119";
- function = "sec_mi2s";
- drive-strength = <2>;
- bias-disable;
- };
-
- sdc1_default: sdc1-default-state {
- clk-pins {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <16>;
- };
- cmd-pins {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
- data-pins {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <10>;
- };
- };
-
- sdc1_sleep: sdc1-sleep-state {
- clk-pins {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <2>;
- };
- cmd-pins {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
- data-pins {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
-
- sdc2_default: sdc2-default-state {
- clk-pins {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <16>;
- };
- cmd-pins {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
- data-pins {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <10>;
- };
- };
-
- sdc2_sleep: sdc2-sleep-state {
- clk-pins {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <2>;
- };
- cmd-pins {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
- data-pins {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
-
- wcss_wlan_default: wcss-wlan-default-state {
- pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
- function = "wcss_wlan";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
-
- gcc: clock-controller@1800000 {
- compatible = "qcom,gcc-msm8916";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x01800000 0x80000>;
- clocks = <&xo_board>,
- <&sleep_clk>,
- <&mdss_dsi0_phy 1>,
- <&mdss_dsi0_phy 0>,
- <0>,
- <0>,
- <0>;
- clock-names = "xo",
- "sleep_clk",
- "dsi0pll",
- "dsi0pllbyte",
- "ext_mclk",
- "ext_pri_i2s",
- "ext_sec_i2s";
- };
-
- tcsr_mutex: hwlock@1905000 {
- compatible = "qcom,tcsr-mutex";
- reg = <0x01905000 0x20000>;
- #hwlock-cells = <1>;
- };
-
- tcsr: syscon@1937000 {
- compatible = "qcom,tcsr-msm8916", "syscon";
- reg = <0x01937000 0x30000>;
- };
-
- mdss: display-subsystem@1a00000 {
- status = "disabled";
- compatible = "qcom,mdss";
- reg = <0x01a00000 0x1000>,
- <0x01ac8000 0x3000>;
- reg-names = "mdss_phys", "vbif_phys";
-
- power-domains = <&gcc MDSS_GDSC>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "vsync";
-
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mdss_mdp: display-controller@1a01000 {
- compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
- reg = <0x01a01000 0x89000>;
- reg-names = "mdp_phys";
-
- interrupt-parent = <&mdss>;
- interrupts = <0>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_MDP_CLK>,
- <&gcc GCC_MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "core",
- "vsync";
-
- iommus = <&apps_iommu 4>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdss_mdp_intf1_out: endpoint {
- remote-endpoint = <&mdss_dsi0_in>;
- };
- };
- };
- };
-
- mdss_dsi0: dsi@1a98000 {
- compatible = "qcom,msm8916-dsi-ctrl",
- "qcom,mdss-dsi-ctrl";
- reg = <0x01a98000 0x25c>;
- reg-names = "dsi_ctrl";
-
- interrupt-parent = <&mdss>;
- interrupts = <4>;
-
- assigned-clocks = <&gcc BYTE0_CLK_SRC>,
- <&gcc PCLK0_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi0_phy 0>,
- <&mdss_dsi0_phy 1>;
-
- clocks = <&gcc GCC_MDSS_MDP_CLK>,
- <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_BYTE0_CLK>,
- <&gcc GCC_MDSS_PCLK0_CLK>,
- <&gcc GCC_MDSS_ESC0_CLK>;
- clock-names = "mdp_core",
- "iface",
- "bus",
- "byte",
- "pixel",
- "core";
- phys = <&mdss_dsi0_phy>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdss_dsi0_in: endpoint {
- remote-endpoint = <&mdss_mdp_intf1_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- mdss_dsi0_out: endpoint {
- };
- };
- };
- };
-
- mdss_dsi0_phy: phy@1a98300 {
- compatible = "qcom,dsi-phy-28nm-lp";
- reg = <0x01a98300 0xd4>,
- <0x01a98500 0x280>,
- <0x01a98780 0x30>;
- reg-names = "dsi_pll",
- "dsi_phy",
- "dsi_phy_regulator";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&xo_board>;
- clock-names = "iface", "ref";
- };
- };
-
- camss: camss@1b0ac00 {
- compatible = "qcom,msm8916-camss";
- reg = <0x01b0ac00 0x200>,
- <0x01b00030 0x4>,
- <0x01b0b000 0x200>,
- <0x01b00038 0x4>,
- <0x01b08000 0x100>,
- <0x01b08400 0x100>,
- <0x01b0a000 0x500>,
- <0x01b00020 0x10>,
- <0x01b10000 0x1000>;
- reg-names = "csiphy0",
- "csiphy0_clk_mux",
- "csiphy1",
- "csiphy1_clk_mux",
- "csid0",
- "csid1",
- "ispif",
- "csi_clk_mux",
- "vfe0";
- interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "csiphy0",
- "csiphy1",
- "csid0",
- "csid1",
- "ispif",
- "vfe0";
- power-domains = <&gcc VFE_GDSC>;
- clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
- <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
- <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
- <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI0_CLK>,
- <&gcc GCC_CAMSS_CSI0PHY_CLK>,
- <&gcc GCC_CAMSS_CSI0PIX_CLK>,
- <&gcc GCC_CAMSS_CSI0RDI_CLK>,
- <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI1_CLK>,
- <&gcc GCC_CAMSS_CSI1PHY_CLK>,
- <&gcc GCC_CAMSS_CSI1PIX_CLK>,
- <&gcc GCC_CAMSS_CSI1RDI_CLK>,
- <&gcc GCC_CAMSS_AHB_CLK>,
- <&gcc GCC_CAMSS_VFE0_CLK>,
- <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
- <&gcc GCC_CAMSS_VFE_AHB_CLK>,
- <&gcc GCC_CAMSS_VFE_AXI_CLK>;
- clock-names = "top_ahb",
- "ispif_ahb",
- "csiphy0_timer",
- "csiphy1_timer",
- "csi0_ahb",
- "csi0",
- "csi0_phy",
- "csi0_pix",
- "csi0_rdi",
- "csi1_ahb",
- "csi1",
- "csi1_phy",
- "csi1_pix",
- "csi1_rdi",
- "ahb",
- "vfe0",
- "csi_vfe0",
- "vfe_ahb",
- "vfe_axi";
- iommus = <&apps_iommu 3>;
- status = "disabled";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- };
-
- port@1 {
- reg = <1>;
- };
- };
- };
-
- cci: cci@1b0c000 {
- compatible = "qcom,msm8916-cci", "qcom,msm8226-cci";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x01b0c000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
- clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
- <&gcc GCC_CAMSS_CCI_AHB_CLK>,
- <&gcc GCC_CAMSS_CCI_CLK>,
- <&gcc GCC_CAMSS_AHB_CLK>;
- clock-names = "camss_top_ahb", "cci_ahb",
- "cci", "camss_ahb";
- assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
- <&gcc GCC_CAMSS_CCI_CLK>;
- assigned-clock-rates = <80000000>, <19200000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cci0_default>;
- status = "disabled";
-
- cci_i2c0: i2c-bus@0 {
- reg = <0>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- gpu: gpu@1c00000 {
- compatible = "qcom,adreno-306.0", "qcom,adreno";
- reg = <0x01c00000 0x20000>;
- reg-names = "kgsl_3d0_reg_memory";
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "kgsl_3d0_irq";
- clock-names =
- "core",
- "iface",
- "mem",
- "mem_iface",
- "alt_mem_iface",
- "gfx3d";
- clocks =
- <&gcc GCC_OXILI_GFX3D_CLK>,
- <&gcc GCC_OXILI_AHB_CLK>,
- <&gcc GCC_OXILI_GMEM_CLK>,
- <&gcc GCC_BIMC_GFX_CLK>,
- <&gcc GCC_BIMC_GPU_CLK>,
- <&gcc GFX3D_CLK_SRC>;
- power-domains = <&gcc OXILI_GDSC>;
- operating-points-v2 = <&gpu_opp_table>;
- iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
- status = "disabled";
-
- gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- };
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
- };
- };
- };
-
- venus: video-codec@1d00000 {
- compatible = "qcom,msm8916-venus";
- reg = <0x01d00000 0xff000>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&gcc VENUS_GDSC>;
- clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
- <&gcc GCC_VENUS0_AHB_CLK>,
- <&gcc GCC_VENUS0_AXI_CLK>;
- clock-names = "core", "iface", "bus";
- iommus = <&apps_iommu 5>;
- memory-region = <&venus_mem>;
- status = "disabled";
-
- video-decoder {
- compatible = "venus-decoder";
- };
-
- video-encoder {
- compatible = "venus-encoder";
- };
- };
-
- apps_iommu: iommu@1ef0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #iommu-cells = <1>;
- compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
- ranges = <0 0x01e20000 0x20000>;
- reg = <0x01ef0000 0x3000>;
- clocks = <&gcc GCC_SMMU_CFG_CLK>,
- <&gcc GCC_APSS_TCU_CLK>;
- clock-names = "iface", "bus";
- qcom,iommu-secure-id = <17>;
-
- /* VFE */
- iommu-ctx@3000 {
- compatible = "qcom,msm-iommu-v1-sec";
- reg = <0x3000 0x1000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- /* MDP_0 */
- iommu-ctx@4000 {
- compatible = "qcom,msm-iommu-v1-ns";
- reg = <0x4000 0x1000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- /* VENUS_NS */
- iommu-ctx@5000 {
- compatible = "qcom,msm-iommu-v1-sec";
- reg = <0x5000 0x1000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- gpu_iommu: iommu@1f08000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #iommu-cells = <1>;
- compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
- ranges = <0 0x01f08000 0x10000>;
- clocks = <&gcc GCC_SMMU_CFG_CLK>,
- <&gcc GCC_GFX_TCU_CLK>;
- clock-names = "iface", "bus";
- qcom,iommu-secure-id = <18>;
-
- /* GFX3D_USER */
- iommu-ctx@1000 {
- compatible = "qcom,msm-iommu-v1-ns";
- reg = <0x1000 0x1000>;
- interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- /* GFX3D_PRIV */
- iommu-ctx@2000 {
- compatible = "qcom,msm-iommu-v1-ns";
- reg = <0x2000 0x1000>;
- interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- spmi_bus: spmi@200f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0200f000 0x001000>,
- <0x02400000 0x400000>,
- <0x02c00000 0x400000>,
- <0x03800000 0x200000>,
- <0x0200a000 0x002100>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- bam_dmux_dma: dma-controller@4044000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x04044000 0x19000>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- qcom,ee = <0>;
-
- num-channels = <6>;
- qcom,num-ees = <1>;
- qcom,powered-remotely;
-
- status = "disabled";
- };
-
- mpss: remoteproc@4080000 {
- compatible = "qcom,msm8916-mss-pil";
- reg = <0x04080000 0x100>,
- <0x04020000 0x040>;
-
- reg-names = "qdsp6", "rmb";
-
- interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
- <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- power-domains = <&rpmpd MSM8916_VDDCX>,
- <&rpmpd MSM8916_VDDMX>;
- power-domain-names = "cx", "mx";
-
- clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
- <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
- <&gcc GCC_BOOT_ROM_AHB_CLK>,
- <&xo_board>;
- clock-names = "iface", "bus", "mem", "xo";
-
- qcom,smem-states = <&hexagon_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- resets = <&scm 0>;
- reset-names = "mss_restart";
-
- qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
-
- status = "disabled";
-
- mba {
- memory-region = <&mba_mem>;
- };
-
- mpss {
- memory-region = <&mpss_mem>;
- };
-
- bam_dmux: bam-dmux {
- compatible = "qcom,bam-dmux";
-
- interrupt-parent = <&hexagon_smsm>;
- interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "pc", "pc-ack";
-
- qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
- qcom,smem-state-names = "pc", "pc-ack";
-
- dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
- dma-names = "tx", "rx";
-
- status = "disabled";
- };
-
- smd-edge {
- interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
- qcom,smd-edge = <0>;
- qcom,ipc = <&apcs 8 12>;
- qcom,remote-pid = <1>;
-
- label = "hexagon";
-
- fastrpc {
- compatible = "qcom,fastrpc";
- qcom,smd-channels = "fastrpcsmd-apps-dsp";
- label = "adsp";
- qcom,non-secure-domain;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- cb@1 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <1>;
- };
- };
- };
- };
-
- sound: sound@7702000 {
- status = "disabled";
- compatible = "qcom,apq8016-sbc-sndcard";
- reg = <0x07702000 0x4>, <0x07702004 0x4>;
- reg-names = "mic-iomux", "spkr-iomux";
- };
-
- lpass: audio-controller@7708000 {
- status = "disabled";
- compatible = "qcom,apq8016-lpass-cpu";
-
- /*
- * Note: Unlike the name would suggest, the SEC_I2S_CLK
- * is actually only used by Tertiary MI2S while
- * Primary/Secondary MI2S both use the PRI_I2S_CLK.
- */
- clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
- <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
- <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
- <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
-
- clock-names = "ahbix-clk",
- "mi2s-bit-clk0",
- "mi2s-bit-clk1",
- "mi2s-bit-clk2",
- "mi2s-bit-clk3",
- "pcnoc-mport-clk",
- "pcnoc-sway-clk";
- #sound-dai-cells = <1>;
-
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "lpass-irq-lpaif";
- reg = <0x07708000 0x10000>;
- reg-names = "lpass-lpaif";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- lpass_codec: audio-codec@771c000 {
- compatible = "qcom,msm8916-wcd-digital-codec";
- reg = <0x0771c000 0x400>;
- clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
- <&gcc GCC_CODEC_DIGCODEC_CLK>;
- clock-names = "ahbix-clk", "mclk";
- #sound-dai-cells = <1>;
- status = "disabled";
- };
-
- sdhc_1: mmc@7824900 {
- compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
- reg = <0x07824900 0x11c>, <0x07824000 0x800>;
- reg-names = "hc", "core";
-
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC1_AHB_CLK>,
- <&gcc GCC_SDCC1_APPS_CLK>,
- <&xo_board>;
- clock-names = "iface", "core", "xo";
- pinctrl-0 = <&sdc1_default>;
- pinctrl-1 = <&sdc1_sleep>;
- pinctrl-names = "default", "sleep";
- mmc-ddr-1_8v;
- bus-width = <8>;
- non-removable;
- status = "disabled";
- };
-
- sdhc_2: mmc@7864900 {
- compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
- reg = <0x07864900 0x11c>, <0x07864000 0x800>;
- reg-names = "hc", "core";
-
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&xo_board>;
- clock-names = "iface", "core", "xo";
- pinctrl-0 = <&sdc2_default>;
- pinctrl-1 = <&sdc2_sleep>;
- pinctrl-names = "default", "sleep";
- bus-width = <4>;
- status = "disabled";
- };
-
- blsp_dma: dma-controller@7884000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x07884000 0x23000>;
- interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- };
-
- blsp_uart1: serial@78af000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x078af000 0x200>;
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 0>, <&blsp_dma 1>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_uart1_default>;
- pinctrl-1 = <&blsp_uart1_sleep>;
- status = "disabled";
- };
-
- blsp_uart2: serial@78b0000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x078b0000 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 2>, <&blsp_dma 3>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_uart2_default>;
- pinctrl-1 = <&blsp_uart2_sleep>;
- status = "disabled";
- };
-
- blsp_i2c1: i2c@78b5000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b5000 0x500>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 4>, <&blsp_dma 5>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_i2c1_default>;
- pinctrl-1 = <&blsp_i2c1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_spi1: spi@78b5000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b5000 0x500>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 4>, <&blsp_dma 5>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_spi1_default>;
- pinctrl-1 = <&blsp_spi1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c2: i2c@78b6000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b6000 0x500>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 6>, <&blsp_dma 7>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_i2c2_default>;
- pinctrl-1 = <&blsp_i2c2_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_spi2: spi@78b6000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b6000 0x500>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 6>, <&blsp_dma 7>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_spi2_default>;
- pinctrl-1 = <&blsp_spi2_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c3: i2c@78b7000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b7000 0x500>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 8>, <&blsp_dma 9>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_i2c3_default>;
- pinctrl-1 = <&blsp_i2c3_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_spi3: spi@78b7000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b7000 0x500>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 8>, <&blsp_dma 9>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_spi3_default>;
- pinctrl-1 = <&blsp_spi3_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c4: i2c@78b8000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b8000 0x500>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 10>, <&blsp_dma 11>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_i2c4_default>;
- pinctrl-1 = <&blsp_i2c4_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_spi4: spi@78b8000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b8000 0x500>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 10>, <&blsp_dma 11>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_spi4_default>;
- pinctrl-1 = <&blsp_spi4_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c5: i2c@78b9000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b9000 0x500>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 12>, <&blsp_dma 13>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_i2c5_default>;
- pinctrl-1 = <&blsp_i2c5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_spi5: spi@78b9000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b9000 0x500>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 12>, <&blsp_dma 13>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_spi5_default>;
- pinctrl-1 = <&blsp_spi5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c6: i2c@78ba000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078ba000 0x500>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 14>, <&blsp_dma 15>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_i2c6_default>;
- pinctrl-1 = <&blsp_i2c6_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_spi6: spi@78ba000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078ba000 0x500>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp_dma 14>, <&blsp_dma 15>;
- dma-names = "tx", "rx";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp_spi6_default>;
- pinctrl-1 = <&blsp_spi6_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- usb: usb@78d9000 {
- compatible = "qcom,ci-hdrc";
- reg = <0x078d9000 0x200>,
- <0x078d9200 0x200>;
- interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_USB_HS_AHB_CLK>,
- <&gcc GCC_USB_HS_SYSTEM_CLK>;
- clock-names = "iface", "core";
- assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
- assigned-clock-rates = <80000000>;
- resets = <&gcc GCC_USB_HS_BCR>;
- reset-names = "core";
- phy_type = "ulpi";
- dr_mode = "otg";
- hnp-disable;
- srp-disable;
- adp-disable;
- ahb-burst-config = <0>;
- phy-names = "usb-phy";
- phys = <&usb_hs_phy>;
- status = "disabled";
- #reset-cells = <1>;
-
- ulpi {
- usb_hs_phy: phy {
- compatible = "qcom,usb-hs-phy-msm8916",
- "qcom,usb-hs-phy";
- #phy-cells = <0>;
- clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
- clock-names = "ref", "sleep";
- resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
- reset-names = "phy", "por";
- qcom,init-seq = /bits/ 8 <0x0 0x44>,
- <0x1 0x6b>,
- <0x2 0x24>,
- <0x3 0x13>;
- };
- };
- };
-
- wcnss: remoteproc@a204000 {
- compatible = "qcom,pronto-v2-pil", "qcom,pronto";
- reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
- reg-names = "ccu", "dxe", "pmu";
-
- memory-region = <&wcnss_mem>;
-
- interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
- power-domains = <&rpmpd MSM8916_VDDCX>,
- <&rpmpd MSM8916_VDDMX>;
- power-domain-names = "cx", "mx";
-
- qcom,smem-states = <&wcnss_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- pinctrl-names = "default";
- pinctrl-0 = <&wcss_wlan_default>;
-
- status = "disabled";
-
- wcnss_iris: iris {
- /* Separate chip, compatible is board-specific */
- clocks = <&rpmcc RPM_SMD_RF_CLK2>;
- clock-names = "xo";
- };
-
- smd-edge {
- interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 17>;
- qcom,smd-edge = <6>;
- qcom,remote-pid = <4>;
-
- label = "pronto";
-
- wcnss_ctrl: wcnss {
- compatible = "qcom,wcnss";
- qcom,smd-channels = "WCNSS_CTRL";
-
- qcom,mmio = <&wcnss>;
-
- wcnss_bt: bluetooth {
- compatible = "qcom,wcnss-bt";
- };
-
- wcnss_wifi: wifi {
- compatible = "qcom,wcnss-wlan";
-
- interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
-
- qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
- qcom,smem-state-names = "tx-enable", "tx-rings-empty";
- };
- };
- };
- };
-
- intc: interrupt-controller@b000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
- <0x0b001000 0x1000>, <0x0b004000 0x2000>;
- interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- apcs: mailbox@b011000 {
- compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
- reg = <0x0b011000 0x1000>;
- #mbox-cells = <1>;
- clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
- clock-names = "pll", "aux";
- #clock-cells = <0>;
- };
-
- a53pll: clock@b016000 {
- compatible = "qcom,msm8916-a53pll";
- reg = <0x0b016000 0x40>;
- #clock-cells = <0>;
- clocks = <&xo_board>;
- clock-names = "xo";
- };
-
- timer@b020000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0x0b020000 0x1000>;
- clock-frequency = <19200000>;
-
- frame@b021000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b021000 0x1000>,
- <0x0b022000 0x1000>;
- };
-
- frame@b023000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b023000 0x1000>;
- status = "disabled";
- };
-
- frame@b024000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b024000 0x1000>;
- status = "disabled";
- };
-
- frame@b025000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b025000 0x1000>;
- status = "disabled";
- };
-
- frame@b026000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b026000 0x1000>;
- status = "disabled";
- };
-
- frame@b027000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b027000 0x1000>;
- status = "disabled";
- };
-
- frame@b028000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b028000 0x1000>;
- status = "disabled";
- };
- };
-
- cpu0_acc: power-manager@b088000 {
- compatible = "qcom,msm8916-acc";
- reg = <0x0b088000 0x1000>;
- status = "reserved"; /* Controlled by PSCI firmware */
- };
-
- cpu0_saw: power-manager@b089000 {
- compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
- reg = <0x0b089000 0x1000>;
- status = "reserved"; /* Controlled by PSCI firmware */
- };
-
- cpu1_acc: power-manager@b098000 {
- compatible = "qcom,msm8916-acc";
- reg = <0x0b098000 0x1000>;
- status = "reserved"; /* Controlled by PSCI firmware */
- };
-
- cpu1_saw: power-manager@b099000 {
- compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
- reg = <0x0b099000 0x1000>;
- status = "reserved"; /* Controlled by PSCI firmware */
- };
-
- cpu2_acc: power-manager@b0a8000 {
- compatible = "qcom,msm8916-acc";
- reg = <0x0b0a8000 0x1000>;
- status = "reserved"; /* Controlled by PSCI firmware */
- };
-
- cpu2_saw: power-manager@b0a9000 {
- compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
- reg = <0x0b0a9000 0x1000>;
- status = "reserved"; /* Controlled by PSCI firmware */
- };
-
- cpu3_acc: power-manager@b0b8000 {
- compatible = "qcom,msm8916-acc";
- reg = <0x0b0b8000 0x1000>;
- status = "reserved"; /* Controlled by PSCI firmware */
- };
-
- cpu3_saw: power-manager@b0b9000 {
- compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
- reg = <0x0b0b9000 0x1000>;
- status = "reserved"; /* Controlled by PSCI firmware */
- };
- };
-
- thermal-zones {
- cpu0-1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 5>;
-
- trips {
- cpu0_1_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu0_1_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu0_1_alert0>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-
- cpu2-3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 4>;
-
- trips {
- cpu2_3_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu2_3_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu2_3_alert0>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-
- gpu-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 2>;
-
- trips {
- gpu_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- gpu_crit: gpu-crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 1>;
-
- trips {
- cam_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- modem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 0>;
-
- trips {
- modem_alert0: trip-point0 {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-};
deleted file mode 100644
@@ -1,3884 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8996.h>
-#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/interconnect/qcom,msm8996.h>
-#include <dt-bindings/interconnect/qcom,msm8996-cbf.h>
-#include <dt-bindings/firmware/qcom,scm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/soc/qcom,apr.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- interrupt-parent = <&intc>;
-
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- clocks {
- xo_board: xo-board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- clock-output-names = "xo_board";
- };
-
- sleep_clk: sleep-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32764>;
- clock-output-names = "sleep_clk";
- };
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "qcom,kryo";
- reg = <0x0 0x0>;
- enable-method = "psci";
- cpu-idle-states = <&CPU_SLEEP_0>;
- capacity-dmips-mhz = <1024>;
- clocks = <&kryocc 0>;
- interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
- operating-points-v2 = <&cluster0_opp>;
- #cooling-cells = <2>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- };
- };
-
- CPU1: cpu@1 {
- device_type = "cpu";
- compatible = "qcom,kryo";
- reg = <0x0 0x1>;
- enable-method = "psci";
- cpu-idle-states = <&CPU_SLEEP_0>;
- capacity-dmips-mhz = <1024>;
- clocks = <&kryocc 0>;
- interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
- operating-points-v2 = <&cluster0_opp>;
- #cooling-cells = <2>;
- next-level-cache = <&L2_0>;
- };
-
- CPU2: cpu@100 {
- device_type = "cpu";
- compatible = "qcom,kryo";
- reg = <0x0 0x100>;
- enable-method = "psci";
- cpu-idle-states = <&CPU_SLEEP_0>;
- capacity-dmips-mhz = <1024>;
- clocks = <&kryocc 1>;
- interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
- operating-points-v2 = <&cluster1_opp>;
- #cooling-cells = <2>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- };
- };
-
- CPU3: cpu@101 {
- device_type = "cpu";
- compatible = "qcom,kryo";
- reg = <0x0 0x101>;
- enable-method = "psci";
- cpu-idle-states = <&CPU_SLEEP_0>;
- capacity-dmips-mhz = <1024>;
- clocks = <&kryocc 1>;
- interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
- operating-points-v2 = <&cluster1_opp>;
- #cooling-cells = <2>;
- next-level-cache = <&L2_1>;
- };
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&CPU0>;
- };
-
- core1 {
- cpu = <&CPU1>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&CPU2>;
- };
-
- core1 {
- cpu = <&CPU3>;
- };
- };
- };
-
- idle-states {
- entry-method = "psci";
-
- CPU_SLEEP_0: cpu-sleep-0 {
- compatible = "arm,idle-state";
- idle-state-name = "standalone-power-collapse";
- arm,psci-suspend-param = <0x00000004>;
- entry-latency-us = <130>;
- exit-latency-us = <80>;
- min-residency-us = <300>;
- };
- };
- };
-
- cluster0_opp: opp-table-cluster0 {
- compatible = "operating-points-v2-kryo-cpu";
- nvmem-cells = <&speedbin_efuse>;
- opp-shared;
-
- /* Nominal fmax for now */
- opp-307200000 {
- opp-hz = /bits/ 64 <307200000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <307200>;
- };
- opp-422400000 {
- opp-hz = /bits/ 64 <422400000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <307200>;
- };
- opp-480000000 {
- opp-hz = /bits/ 64 <480000000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <307200>;
- };
- opp-556800000 {
- opp-hz = /bits/ 64 <556800000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <307200>;
- };
- opp-652800000 {
- opp-hz = /bits/ 64 <652800000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <384000>;
- };
- opp-729600000 {
- opp-hz = /bits/ 64 <729600000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <460800>;
- };
- opp-844800000 {
- opp-hz = /bits/ 64 <844800000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <537600>;
- };
- opp-960000000 {
- opp-hz = /bits/ 64 <960000000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <672000>;
- };
- opp-1036800000 {
- opp-hz = /bits/ 64 <1036800000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <672000>;
- };
- opp-1113600000 {
- opp-hz = /bits/ 64 <1113600000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <825600>;
- };
- opp-1190400000 {
- opp-hz = /bits/ 64 <1190400000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <825600>;
- };
- opp-1228800000 {
- opp-hz = /bits/ 64 <1228800000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <902400>;
- };
- opp-1324800000 {
- opp-hz = /bits/ 64 <1324800000>;
- opp-supported-hw = <0xd>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1056000>;
- };
- opp-1363200000 {
- opp-hz = /bits/ 64 <1363200000>;
- opp-supported-hw = <0x2>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1132800>;
- };
- opp-1401600000 {
- opp-hz = /bits/ 64 <1401600000>;
- opp-supported-hw = <0xd>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1132800>;
- };
- opp-1478400000 {
- opp-hz = /bits/ 64 <1478400000>;
- opp-supported-hw = <0x9>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1190400>;
- };
- opp-1497600000 {
- opp-hz = /bits/ 64 <1497600000>;
- opp-supported-hw = <0x04>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1305600>;
- };
- opp-1593600000 {
- opp-hz = /bits/ 64 <1593600000>;
- opp-supported-hw = <0x9>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1382400>;
- };
- };
-
- cluster1_opp: opp-table-cluster1 {
- compatible = "operating-points-v2-kryo-cpu";
- nvmem-cells = <&speedbin_efuse>;
- opp-shared;
-
- /* Nominal fmax for now */
- opp-307200000 {
- opp-hz = /bits/ 64 <307200000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <307200>;
- };
- opp-403200000 {
- opp-hz = /bits/ 64 <403200000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <307200>;
- };
- opp-480000000 {
- opp-hz = /bits/ 64 <480000000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <307200>;
- };
- opp-556800000 {
- opp-hz = /bits/ 64 <556800000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <307200>;
- };
- opp-652800000 {
- opp-hz = /bits/ 64 <652800000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <307200>;
- };
- opp-729600000 {
- opp-hz = /bits/ 64 <729600000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <307200>;
- };
- opp-806400000 {
- opp-hz = /bits/ 64 <806400000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <384000>;
- };
- opp-883200000 {
- opp-hz = /bits/ 64 <883200000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <460800>;
- };
- opp-940800000 {
- opp-hz = /bits/ 64 <940800000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <537600>;
- };
- opp-1036800000 {
- opp-hz = /bits/ 64 <1036800000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <595200>;
- };
- opp-1113600000 {
- opp-hz = /bits/ 64 <1113600000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <672000>;
- };
- opp-1190400000 {
- opp-hz = /bits/ 64 <1190400000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <672000>;
- };
- opp-1248000000 {
- opp-hz = /bits/ 64 <1248000000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <748800>;
- };
- opp-1324800000 {
- opp-hz = /bits/ 64 <1324800000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <825600>;
- };
- opp-1401600000 {
- opp-hz = /bits/ 64 <1401600000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <902400>;
- };
- opp-1478400000 {
- opp-hz = /bits/ 64 <1478400000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <979200>;
- };
- opp-1555200000 {
- opp-hz = /bits/ 64 <1555200000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1056000>;
- };
- opp-1632000000 {
- opp-hz = /bits/ 64 <1632000000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1190400>;
- };
- opp-1708800000 {
- opp-hz = /bits/ 64 <1708800000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1228800>;
- };
- opp-1785600000 {
- opp-hz = /bits/ 64 <1785600000>;
- opp-supported-hw = <0xf>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1305600>;
- };
- opp-1804800000 {
- opp-hz = /bits/ 64 <1804800000>;
- opp-supported-hw = <0xe>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1305600>;
- };
- opp-1824000000 {
- opp-hz = /bits/ 64 <1824000000>;
- opp-supported-hw = <0x1>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1382400>;
- };
- opp-1900800000 {
- opp-hz = /bits/ 64 <1900800000>;
- opp-supported-hw = <0x4>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1305600>;
- };
- opp-1920000000 {
- opp-hz = /bits/ 64 <1920000000>;
- opp-supported-hw = <0x1>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1459200>;
- };
- opp-1996800000 {
- opp-hz = /bits/ 64 <1996800000>;
- opp-supported-hw = <0x1>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1593600>;
- };
- opp-2073600000 {
- opp-hz = /bits/ 64 <2073600000>;
- opp-supported-hw = <0x1>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1593600>;
- };
- opp-2150400000 {
- opp-hz = /bits/ 64 <2150400000>;
- opp-supported-hw = <0x1>;
- clock-latency-ns = <200000>;
- opp-peak-kBps = <1593600>;
- };
- };
-
- firmware {
- scm {
- compatible = "qcom,scm-msm8996", "qcom,scm";
- qcom,dload-mode = <&tcsr_2 0x13000>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- /* We expect the bootloader to fill in the reg */
- reg = <0x0 0x80000000 0x0 0x0>;
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- rpm: remoteproc {
- compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc";
-
- glink-edge {
- compatible = "qcom,glink-rpm";
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8996";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
- #clock-cells = <1>;
- clocks = <&xo_board>;
- clock-names = "xo";
- };
-
- rpmpd: power-controller {
- compatible = "qcom,msm8996-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp1: opp1 {
- opp-level = <1>;
- };
-
- rpmpd_opp2: opp2 {
- opp-level = <2>;
- };
-
- rpmpd_opp3: opp3 {
- opp-level = <3>;
- };
-
- rpmpd_opp4: opp4 {
- opp-level = <4>;
- };
-
- rpmpd_opp5: opp5 {
- opp-level = <5>;
- };
-
- rpmpd_opp6: opp6 {
- opp-level = <6>;
- };
- };
- };
- };
- };
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- hyp_mem: memory@85800000 {
- reg = <0x0 0x85800000 0x0 0x600000>;
- no-map;
- };
-
- xbl_mem: memory@85e00000 {
- reg = <0x0 0x85e00000 0x0 0x200000>;
- no-map;
- };
-
- smem_mem: smem-mem@86000000 {
- reg = <0x0 0x86000000 0x0 0x200000>;
- no-map;
- };
-
- tz_mem: memory@86200000 {
- reg = <0x0 0x86200000 0x0 0x2600000>;
- no-map;
- };
-
- rmtfs_mem: rmtfs {
- compatible = "qcom,rmtfs-mem";
-
- size = <0x0 0x200000>;
- alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
- no-map;
-
- qcom,client-id = <1>;
- qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
- };
-
- mpss_mem: mpss@88800000 {
- reg = <0x0 0x88800000 0x0 0x6200000>;
- no-map;
- };
-
- adsp_mem: adsp@8ea00000 {
- reg = <0x0 0x8ea00000 0x0 0x1b00000>;
- no-map;
- };
-
- slpi_mem: slpi@90500000 {
- reg = <0x0 0x90500000 0x0 0xa00000>;
- no-map;
- };
-
- gpu_mem: gpu@90f00000 {
- compatible = "shared-dma-pool";
- reg = <0x0 0x90f00000 0x0 0x100000>;
- no-map;
- };
-
- venus_mem: venus@91000000 {
- reg = <0x0 0x91000000 0x0 0x500000>;
- no-map;
- };
-
- mba_mem: mba@91500000 {
- reg = <0x0 0x91500000 0x0 0x200000>;
- no-map;
- };
-
- mdata_mem: mpss-metadata {
- alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
- size = <0x0 0x4000>;
- no-map;
- };
- };
-
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem_mem>;
- hwlocks = <&tcsr_mutex 3>;
- };
-
- smp2p-adsp {
- compatible = "qcom,smp2p";
- qcom,smem = <443>, <429>;
-
- interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
-
- mboxes = <&apcs_glb 10>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <2>;
-
- adsp_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- adsp_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- smp2p-mpss {
- compatible = "qcom,smp2p";
- qcom,smem = <435>, <428>;
-
- interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
-
- mboxes = <&apcs_glb 14>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <1>;
-
- mpss_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- mpss_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- smp2p-slpi {
- compatible = "qcom,smp2p";
- qcom,smem = <481>, <430>;
-
- interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
-
- mboxes = <&apcs_glb 26>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <3>;
-
- slpi_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- slpi_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- soc: soc@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
- compatible = "simple-bus";
-
- pcie_phy: phy-wrapper@34000 {
- compatible = "qcom,msm8996-qmp-pcie-phy";
- reg = <0x00034000 0x488>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x00034000 0x4000>;
-
- clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
- <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
-
- resets = <&gcc GCC_PCIE_PHY_BCR>,
- <&gcc GCC_PCIE_PHY_COM_BCR>,
- <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
- reset-names = "phy", "common", "cfg";
-
- status = "disabled";
-
- pciephy_0: phy@1000 {
- reg = <0x1000 0x130>,
- <0x1200 0x200>,
- <0x1400 0x1dc>;
-
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
- resets = <&gcc GCC_PCIE_0_PHY_BCR>;
- reset-names = "lane0";
-
- #clock-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk_src";
-
- #phy-cells = <0>;
- };
-
- pciephy_1: phy@2000 {
- reg = <0x2000 0x130>,
- <0x2200 0x200>,
- <0x2400 0x1dc>;
-
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe1";
- resets = <&gcc GCC_PCIE_1_PHY_BCR>;
- reset-names = "lane1";
-
- #clock-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk_src";
-
- #phy-cells = <0>;
- };
-
- pciephy_2: phy@3000 {
- reg = <0x3000 0x130>,
- <0x3200 0x200>,
- <0x3400 0x1dc>;
-
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
- clock-names = "pipe2";
- resets = <&gcc GCC_PCIE_2_PHY_BCR>;
- reset-names = "lane2";
-
- #clock-cells = <0>;
- clock-output-names = "pcie_2_pipe_clk_src";
-
- #phy-cells = <0>;
- };
- };
-
- rpm_msg_ram: sram@68000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0x00068000 0x6000>;
- };
-
- qfprom@74000 {
- compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
- reg = <0x00074000 0x8ff>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- qusb2p_hstx_trim: hstx_trim@24e {
- reg = <0x24e 0x2>;
- bits = <5 4>;
- };
-
- qusb2s_hstx_trim: hstx_trim@24f {
- reg = <0x24f 0x1>;
- bits = <1 4>;
- };
-
- speedbin_efuse: speedbin@133 {
- reg = <0x133 0x1>;
- bits = <5 3>;
- };
- };
-
- rng: rng@83000 {
- compatible = "qcom,prng-ee";
- reg = <0x00083000 0x1000>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "core";
- };
-
- gcc: clock-controller@300000 {
- compatible = "qcom,gcc-msm8996";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x00300000 0x90000>;
-
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
- <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&sleep_clk>,
- <&pciephy_0>,
- <&pciephy_1>,
- <&pciephy_2>,
- <&ssusb_phy_0>,
- <&ufsphy_lane 0>,
- <&ufsphy_lane 1>,
- <&ufsphy_lane 2>;
- clock-names = "cxo",
- "cxo2",
- "sleep_clk",
- "pcie_0_pipe_clk_src",
- "pcie_1_pipe_clk_src",
- "pcie_2_pipe_clk_src",
- "usb3_phy_pipe_clk_src",
- "ufs_rx_symbol_0_clk_src",
- "ufs_rx_symbol_1_clk_src",
- "ufs_tx_symbol_0_clk_src";
- };
-
- bimc: interconnect@408000 {
- compatible = "qcom,msm8996-bimc";
- reg = <0x00408000 0x5a000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
- };
-
- tsens0: thermal-sensor@4a9000 {
- compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
- reg = <0x004a9000 0x1000>, /* TM */
- <0x004a8000 0x1000>; /* SROT */
- #qcom,sensors = <13>;
- interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow", "critical";
- #thermal-sensor-cells = <1>;
- };
-
- tsens1: thermal-sensor@4ad000 {
- compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
- reg = <0x004ad000 0x1000>, /* TM */
- <0x004ac000 0x1000>; /* SROT */
- #qcom,sensors = <8>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow", "critical";
- #thermal-sensor-cells = <1>;
- };
-
- cryptobam: dma-controller@644000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x00644000 0x24000>;
- interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_CE1_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- qcom,controlled-remotely;
- };
-
- crypto: crypto@67a000 {
- compatible = "qcom,crypto-v5.4";
- reg = <0x0067a000 0x6000>;
- clocks = <&gcc GCC_CE1_AHB_CLK>,
- <&gcc GCC_CE1_AXI_CLK>,
- <&gcc GCC_CE1_CLK>;
- clock-names = "iface", "bus", "core";
- dmas = <&cryptobam 6>, <&cryptobam 7>;
- dma-names = "rx", "tx";
- };
-
- cnoc: interconnect@500000 {
- compatible = "qcom,msm8996-cnoc";
- reg = <0x00500000 0x1000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
- <&rpmcc RPM_SMD_CNOC_A_CLK>;
- };
-
- snoc: interconnect@524000 {
- compatible = "qcom,msm8996-snoc";
- reg = <0x00524000 0x1c000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
- };
-
- a0noc: interconnect@543000 {
- compatible = "qcom,msm8996-a0noc";
- reg = <0x00543000 0x6000>;
- #interconnect-cells = <1>;
- clock-names = "aggre0_snoc_axi",
- "aggre0_cnoc_ahb",
- "aggre0_noc_mpu_cfg";
- clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>,
- <&gcc GCC_AGGRE0_CNOC_AHB_CLK>,
- <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>;
- power-domains = <&gcc AGGRE0_NOC_GDSC>;
- };
-
- a1noc: interconnect@562000 {
- compatible = "qcom,msm8996-a1noc";
- reg = <0x00562000 0x5000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
- };
-
- a2noc: interconnect@583000 {
- compatible = "qcom,msm8996-a2noc";
- reg = <0x00583000 0x7000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
- <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
- <&gcc GCC_UFS_AXI_CLK>;
- };
-
- mnoc: interconnect@5a4000 {
- compatible = "qcom,msm8996-mnoc";
- reg = <0x005a4000 0x1c000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "iface";
- clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
- <&rpmcc RPM_SMD_MMAXI_A_CLK>,
- <&mmcc AHB_CLK_SRC>;
- };
-
- pnoc: interconnect@5c0000 {
- compatible = "qcom,msm8996-pnoc";
- reg = <0x005c0000 0x3000>;
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
- <&rpmcc RPM_SMD_PCNOC_A_CLK>;
- };
-
- tcsr_mutex: hwlock@740000 {
- compatible = "qcom,tcsr-mutex";
- reg = <0x00740000 0x20000>;
- #hwlock-cells = <1>;
- };
-
- tcsr_1: syscon@760000 {
- compatible = "qcom,tcsr-msm8996", "syscon";
- reg = <0x00760000 0x20000>;
- };
-
- tcsr_2: syscon@7a0000 {
- compatible = "qcom,tcsr-msm8996", "syscon";
- reg = <0x007a0000 0x18000>;
- };
-
- mmcc: clock-controller@8c0000 {
- compatible = "qcom,mmcc-msm8996";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x008c0000 0x40000>;
- clocks = <&xo_board>,
- <&gcc GPLL0>,
- <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
- <&mdss_dsi0_phy 1>,
- <&mdss_dsi0_phy 0>,
- <&mdss_dsi1_phy 1>,
- <&mdss_dsi1_phy 0>,
- <&mdss_hdmi_phy>;
- clock-names = "xo",
- "gpll0",
- "gcc_mmss_noc_cfg_ahb_clk",
- "dsi0pll",
- "dsi0pllbyte",
- "dsi1pll",
- "dsi1pllbyte",
- "hdmipll";
- assigned-clocks = <&mmcc MMPLL9_PLL>,
- <&mmcc MMPLL1_PLL>,
- <&mmcc MMPLL3_PLL>,
- <&mmcc MMPLL4_PLL>,
- <&mmcc MMPLL5_PLL>;
- assigned-clock-rates = <624000000>,
- <810000000>,
- <980000000>,
- <960000000>,
- <825000000>;
- };
-
- mdss: display-subsystem@900000 {
- compatible = "qcom,mdss";
-
- reg = <0x00900000 0x1000>,
- <0x009b0000 0x1040>,
- <0x009b8000 0x1040>;
- reg-names = "mdss_phys",
- "vbif_phys",
- "vbif_nrt_phys";
-
- power-domains = <&mmcc MDSS_GDSC>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- clocks = <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_MDP_CLK>;
- clock-names = "iface", "core";
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- status = "disabled";
-
- mdp: display-controller@901000 {
- compatible = "qcom,msm8996-mdp5", "qcom,mdp5";
- reg = <0x00901000 0x90000>;
- reg-names = "mdp_phys";
-
- interrupt-parent = <&mdss>;
- interrupts = <0>;
-
- clocks = <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_AXI_CLK>,
- <&mmcc MDSS_MDP_CLK>,
- <&mmcc SMMU_MDP_AXI_CLK>,
- <&mmcc MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "core",
- "iommu",
- "vsync";
-
- iommus = <&mdp_smmu 0>;
-
- assigned-clocks = <&mmcc MDSS_MDP_CLK>,
- <&mmcc MDSS_VSYNC_CLK>;
- assigned-clock-rates = <300000000>,
- <19200000>;
-
- interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
- <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>,
- <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>;
- interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdp5_intf3_out: endpoint {
- remote-endpoint = <&mdss_hdmi_in>;
- };
- };
-
- port@1 {
- reg = <1>;
- mdp5_intf1_out: endpoint {
- remote-endpoint = <&mdss_dsi0_in>;
- };
- };
-
- port@2 {
- reg = <2>;
- mdp5_intf2_out: endpoint {
- remote-endpoint = <&mdss_dsi1_in>;
- };
- };
- };
- };
-
- mdss_dsi0: dsi@994000 {
- compatible = "qcom,msm8996-dsi-ctrl",
- "qcom,mdss-dsi-ctrl";
- reg = <0x00994000 0x400>;
- reg-names = "dsi_ctrl";
-
- interrupt-parent = <&mdss>;
- interrupts = <4>;
-
- clocks = <&mmcc MDSS_MDP_CLK>,
- <&mmcc MDSS_BYTE0_CLK>,
- <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_AXI_CLK>,
- <&mmcc MMSS_MISC_AHB_CLK>,
- <&mmcc MDSS_PCLK0_CLK>,
- <&mmcc MDSS_ESC0_CLK>;
- clock-names = "mdp_core",
- "byte",
- "iface",
- "bus",
- "core_mmss",
- "pixel",
- "core";
- assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
-
- phys = <&mdss_dsi0_phy>;
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdss_dsi0_in: endpoint {
- remote-endpoint = <&mdp5_intf1_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- mdss_dsi0_out: endpoint {
- };
- };
- };
- };
-
- mdss_dsi0_phy: phy@994400 {
- compatible = "qcom,dsi-phy-14nm";
- reg = <0x00994400 0x100>,
- <0x00994500 0x300>,
- <0x00994800 0x188>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
- clock-names = "iface", "ref";
- status = "disabled";
- };
-
- mdss_dsi1: dsi@996000 {
- compatible = "qcom,msm8996-dsi-ctrl",
- "qcom,mdss-dsi-ctrl";
- reg = <0x00996000 0x400>;
- reg-names = "dsi_ctrl";
-
- interrupt-parent = <&mdss>;
- interrupts = <5>;
-
- clocks = <&mmcc MDSS_MDP_CLK>,
- <&mmcc MDSS_BYTE1_CLK>,
- <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_AXI_CLK>,
- <&mmcc MMSS_MISC_AHB_CLK>,
- <&mmcc MDSS_PCLK1_CLK>,
- <&mmcc MDSS_ESC1_CLK>;
- clock-names = "mdp_core",
- "byte",
- "iface",
- "bus",
- "core_mmss",
- "pixel",
- "core";
- assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
-
- phys = <&mdss_dsi1_phy>;
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdss_dsi1_in: endpoint {
- remote-endpoint = <&mdp5_intf2_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- mdss_dsi1_out: endpoint {
- };
- };
- };
- };
-
- mdss_dsi1_phy: phy@996400 {
- compatible = "qcom,dsi-phy-14nm";
- reg = <0x00996400 0x100>,
- <0x00996500 0x300>,
- <0x00996800 0x188>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
- clock-names = "iface", "ref";
- status = "disabled";
- };
-
- mdss_hdmi: hdmi-tx@9a0000 {
- compatible = "qcom,hdmi-tx-8996";
- reg = <0x009a0000 0x50c>,
- <0x00070000 0x6158>,
- <0x009e0000 0xfff>;
- reg-names = "core_physical",
- "qfprom_physical",
- "hdcp_physical";
-
- interrupt-parent = <&mdss>;
- interrupts = <8>;
-
- clocks = <&mmcc MDSS_MDP_CLK>,
- <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_HDMI_CLK>,
- <&mmcc MDSS_HDMI_AHB_CLK>,
- <&mmcc MDSS_EXTPCLK_CLK>;
- clock-names =
- "mdp_core",
- "iface",
- "core",
- "alt_iface",
- "extp";
-
- phys = <&mdss_hdmi_phy>;
- #sound-dai-cells = <1>;
-
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdss_hdmi_in: endpoint {
- remote-endpoint = <&mdp5_intf3_out>;
- };
- };
- };
- };
-
- mdss_hdmi_phy: phy@9a0600 {
- #phy-cells = <0>;
- compatible = "qcom,hdmi-phy-8996";
- reg = <0x009a0600 0x1c4>,
- <0x009a0a00 0x124>,
- <0x009a0c00 0x124>,
- <0x009a0e00 0x124>,
- <0x009a1000 0x124>,
- <0x009a1200 0x0c8>;
- reg-names = "hdmi_pll",
- "hdmi_tx_l0",
- "hdmi_tx_l1",
- "hdmi_tx_l2",
- "hdmi_tx_l3",
- "hdmi_phy";
-
- clocks = <&mmcc MDSS_AHB_CLK>,
- <&gcc GCC_HDMI_CLKREF_CLK>,
- <&xo_board>;
- clock-names = "iface",
- "ref",
- "xo";
-
- #clock-cells = <0>;
-
- status = "disabled";
- };
- };
-
- gpu: gpu@b00000 {
- compatible = "qcom,adreno-530.2", "qcom,adreno";
-
- reg = <0x00b00000 0x3f000>;
- reg-names = "kgsl_3d0_reg_memory";
-
- interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&mmcc GPU_GX_GFX3D_CLK>,
- <&mmcc GPU_AHB_CLK>,
- <&mmcc GPU_GX_RBBMTIMER_CLK>,
- <&gcc GCC_BIMC_GFX_CLK>,
- <&gcc GCC_MMSS_BIMC_GFX_CLK>;
-
- clock-names = "core",
- "iface",
- "rbbmtimer",
- "mem",
- "mem_iface";
-
- interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>;
- interconnect-names = "gfx-mem";
-
- power-domains = <&mmcc GPU_GX_GDSC>;
- iommus = <&adreno_smmu 0>;
-
- nvmem-cells = <&speedbin_efuse>;
- nvmem-cell-names = "speed_bin";
-
- operating-points-v2 = <&gpu_opp_table>;
-
- status = "disabled";
-
- #cooling-cells = <2>;
-
- gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- /*
- * 624Mhz is only available on speed bins 0 and 3.
- * 560Mhz is only available on speed bins 0, 2 and 3.
- * All the rest are available on all bins of the hardware.
- */
- opp-624000000 {
- opp-hz = /bits/ 64 <624000000>;
- opp-supported-hw = <0x09>;
- };
- opp-560000000 {
- opp-hz = /bits/ 64 <560000000>;
- opp-supported-hw = <0x0d>;
- };
- opp-510000000 {
- opp-hz = /bits/ 64 <510000000>;
- opp-supported-hw = <0xff>;
- };
- opp-401800000 {
- opp-hz = /bits/ 64 <401800000>;
- opp-supported-hw = <0xff>;
- };
- opp-315000000 {
- opp-hz = /bits/ 64 <315000000>;
- opp-supported-hw = <0xff>;
- };
- opp-214000000 {
- opp-hz = /bits/ 64 <214000000>;
- opp-supported-hw = <0xff>;
- };
- opp-133000000 {
- opp-hz = /bits/ 64 <133000000>;
- opp-supported-hw = <0xff>;
- };
- };
-
- zap-shader {
- memory-region = <&gpu_mem>;
- };
- };
-
- tlmm: pinctrl@1010000 {
- compatible = "qcom,msm8996-pinctrl";
- reg = <0x01010000 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- gpio-ranges = <&tlmm 0 0 150>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- blsp1_spi1_default: blsp1-spi1-default-state {
- spi-pins {
- pins = "gpio0", "gpio1", "gpio3";
- function = "blsp_spi1";
- drive-strength = <12>;
- bias-disable;
- };
-
- cs-pins {
- pins = "gpio2";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp1_spi1_sleep: blsp1-spi1-sleep-state {
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp2_uart2_2pins_default: blsp2-uart2-2pins-state {
- pins = "gpio4", "gpio5";
- function = "blsp_uart8";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state {
- pins = "gpio4", "gpio5";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp2_i2c2_default: blsp2-i2c2-state {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c8";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
- pins = "gpio6", "gpio7";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp1_i2c6_default: blsp1-i2c6-state {
- pins = "gpio27", "gpio28";
- function = "blsp_i2c6";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
- pins = "gpio27", "gpio28";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- cci0_default: cci0-default-state {
- pins = "gpio17", "gpio18";
- function = "cci_i2c";
- drive-strength = <16>;
- bias-disable;
- };
-
- camera0_state_on:
- camera_rear_default: camera-rear-default-state {
- camera0_mclk: mclk0-pins {
- pins = "gpio13";
- function = "cam_mclk";
- drive-strength = <16>;
- bias-disable;
- };
-
- camera0_rst: rst-pins {
- pins = "gpio25";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
-
- camera0_pwdn: pwdn-pins {
- pins = "gpio26";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- cci1_default: cci1-default-state {
- pins = "gpio19", "gpio20";
- function = "cci_i2c";
- drive-strength = <16>;
- bias-disable;
- };
-
- camera1_state_on:
- camera_board_default: camera-board-default-state {
- mclk1-pins {
- pins = "gpio14";
- function = "cam_mclk";
- drive-strength = <16>;
- bias-disable;
- };
-
- pwdn-pins {
- pins = "gpio98";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
-
- rst-pins {
- pins = "gpio104";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- camera2_state_on:
- camera_front_default: camera-front-default-state {
- camera2_mclk: mclk2-pins {
- pins = "gpio15";
- function = "cam_mclk";
- drive-strength = <16>;
- bias-disable;
- };
-
- camera2_rst: rst-pins {
- pins = "gpio23";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
-
- pwdn-pins {
- pins = "gpio133";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- pcie0_state_on: pcie0-state-on-state {
- perst-pins {
- pins = "gpio35";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- clkreq-pins {
- pins = "gpio36";
- function = "pci_e0";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- wake-pins {
- pins = "gpio37";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie0_state_off: pcie0-state-off-state {
- perst-pins {
- pins = "gpio35";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- clkreq-pins {
- pins = "gpio36";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- wake-pins {
- pins = "gpio37";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp1_uart2_default: blsp1-uart2-default-state {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- function = "blsp_uart2";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp1_uart2_sleep: blsp1-uart2-sleep-state {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp1_i2c3_default: blsp1-i2c3-default-state {
- pins = "gpio47", "gpio48";
- function = "blsp_i2c3";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
- pins = "gpio47", "gpio48";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp2_uart3_4pins_default: blsp2-uart3-4pins-state {
- pins = "gpio49", "gpio50", "gpio51", "gpio52";
- function = "blsp_uart9";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state {
- pins = "gpio49", "gpio50", "gpio51", "gpio52";
- function = "blsp_uart9";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp2_i2c3_default: blsp2-i2c3-state-state {
- pins = "gpio51", "gpio52";
- function = "blsp_i2c9";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
- pins = "gpio51", "gpio52";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- wcd_intr_default: wcd-intr-default-state {
- pins = "gpio54";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp2_i2c1_default: blsp2-i2c1-state {
- pins = "gpio55", "gpio56";
- function = "blsp_i2c7";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
- pins = "gpio55", "gpio56";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- blsp2_i2c5_default: blsp2-i2c5-state {
- pins = "gpio60", "gpio61";
- function = "blsp_i2c11";
- drive-strength = <2>;
- bias-disable;
- };
-
- /* Sleep state for BLSP2_I2C5 is missing.. */
-
- cdc_reset_active: cdc-reset-active-state {
- pins = "gpio64";
- function = "gpio";
- drive-strength = <16>;
- bias-pull-down;
- output-high;
- };
-
- cdc_reset_sleep: cdc-reset-sleep-state {
- pins = "gpio64";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-low;
- };
-
- blsp2_spi6_default: blsp2-spi6-default-state {
- spi-pins {
- pins = "gpio85", "gpio86", "gpio88";
- function = "blsp_spi12";
- drive-strength = <12>;
- bias-disable;
- };
-
- cs-pins {
- pins = "gpio87";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp2_spi6_sleep: blsp2-spi6-sleep-state {
- pins = "gpio85", "gpio86", "gpio87", "gpio88";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp2_i2c6_default: blsp2-i2c6-state {
- pins = "gpio87", "gpio88";
- function = "blsp_i2c12";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
- pins = "gpio87", "gpio88";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- pcie1_state_on: pcie1-on-state {
- perst-pins {
- pins = "gpio130";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- clkreq-pins {
- pins = "gpio131";
- function = "pci_e1";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- wake-pins {
- pins = "gpio132";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie1_state_off: pcie1-off-state {
- /* Perst is missing? */
- clkreq-pins {
- pins = "gpio131";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- wake-pins {
- pins = "gpio132";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie2_state_on: pcie2-on-state {
- perst-pins {
- pins = "gpio114";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- clkreq-pins {
- pins = "gpio115";
- function = "pci_e2";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- wake-pins {
- pins = "gpio116";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie2_state_off: pcie2-off-state {
- /* Perst is missing? */
- clkreq-pins {
- pins = "gpio115";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- wake-pins {
- pins = "gpio116";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- sdc1_state_on: sdc1-on-state {
- clk-pins {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- cmd-pins {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- data-pins {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- rclk-pins {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
- };
-
- sdc1_state_off: sdc1-off-state {
- clk-pins {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- cmd-pins {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- data-pins {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- rclk-pins {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
- };
-
- sdc2_state_on: sdc2-on-state {
- clk-pins {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- cmd-pins {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- data-pins {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <10>;
- };
- };
-
- sdc2_state_off: sdc2-off-state {
- clk-pins {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- cmd-pins {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- data-pins {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
- };
-
- sram@290000 {
- compatible = "qcom,rpm-stats";
- reg = <0x00290000 0x10000>;
- };
-
- spmi_bus: spmi@400f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0400f000 0x1000>,
- <0x04400000 0x800000>,
- <0x04c00000 0x800000>,
- <0x05800000 0x200000>,
- <0x0400a000 0x002100>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- bus@0 {
- power-domains = <&gcc AGGRE0_NOC_GDSC>;
- compatible = "simple-pm-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xffffffff>;
-
- pcie0: pcie@600000 {
- compatible = "qcom,pcie-msm8996";
- status = "disabled";
- power-domains = <&gcc PCIE0_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
-
- reg = <0x00600000 0x2000>,
- <0x0c000000 0xf1d>,
- <0x0c000f20 0xa8>,
- <0x0c100000 0x100000>;
- reg-names = "parf", "dbi", "elbi","config";
-
- phys = <&pciephy_0>;
- phy-names = "pciephy";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>,
- <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
-
- device_type = "pci";
-
- interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie0_state_on>;
- pinctrl-1 = <&pcie0_state_off>;
-
- linux,pci-domain = <0>;
-
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
- <&gcc GCC_PCIE_0_AUX_CLK>,
- <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
-
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
- };
-
- pcie1: pcie@608000 {
- compatible = "qcom,pcie-msm8996";
- power-domains = <&gcc PCIE1_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
-
- status = "disabled";
-
- reg = <0x00608000 0x2000>,
- <0x0d000000 0xf1d>,
- <0x0d000f20 0xa8>,
- <0x0d100000 0x100000>;
-
- reg-names = "parf", "dbi", "elbi","config";
-
- phys = <&pciephy_1>;
- phy-names = "pciephy";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>,
- <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
-
- device_type = "pci";
-
- interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie1_state_on>;
- pinctrl-1 = <&pcie1_state_off>;
-
- linux,pci-domain = <1>;
-
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
- <&gcc GCC_PCIE_1_AUX_CLK>,
- <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_AXI_CLK>;
-
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
- };
-
- pcie2: pcie@610000 {
- compatible = "qcom,pcie-msm8996";
- power-domains = <&gcc PCIE2_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- status = "disabled";
- reg = <0x00610000 0x2000>,
- <0x0e000000 0xf1d>,
- <0x0e000f20 0xa8>,
- <0x0e100000 0x100000>;
-
- reg-names = "parf", "dbi", "elbi","config";
-
- phys = <&pciephy_2>;
- phy-names = "pciephy";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>,
- <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
-
- device_type = "pci";
-
- interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie2_state_on>;
- pinctrl-1 = <&pcie2_state_off>;
-
- linux,pci-domain = <2>;
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
- <&gcc GCC_PCIE_2_AUX_CLK>,
- <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_2_SLV_AXI_CLK>;
-
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
- };
- };
-
- ufshc: ufshc@624000 {
- compatible = "qcom,msm8996-ufshc", "qcom,ufshc",
- "jedec,ufs-2.0";
- reg = <0x00624000 0x2500>;
- interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-
- phys = <&ufsphy_lane>;
- phy-names = "ufsphy";
-
- power-domains = <&gcc UFS_GDSC>;
-
- clock-names =
- "core_clk_src",
- "core_clk",
- "bus_clk",
- "bus_aggr_clk",
- "iface_clk",
- "core_clk_unipro_src",
- "core_clk_unipro",
- "core_clk_ice",
- "ref_clk",
- "tx_lane0_sync_clk",
- "rx_lane0_sync_clk";
- clocks =
- <&gcc UFS_AXI_CLK_SRC>,
- <&gcc GCC_UFS_AXI_CLK>,
- <&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
- <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
- <&gcc GCC_UFS_AHB_CLK>,
- <&gcc UFS_ICE_CORE_CLK_SRC>,
- <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
- <&gcc GCC_UFS_ICE_CORE_CLK>,
- <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
- freq-table-hz =
- <100000000 200000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>,
- <150000000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
-
- interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>,
- <&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>;
- interconnect-names = "ufs-ddr", "cpu-ufs";
-
- lanes-per-direction = <1>;
- #reset-cells = <1>;
- status = "disabled";
- };
-
- ufsphy: phy@627000 {
- compatible = "qcom,msm8996-qmp-ufs-phy";
- reg = <0x00627000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clocks = <&gcc GCC_UFS_CLKREF_CLK>;
- clock-names = "ref";
-
- resets = <&ufshc 0>;
- reset-names = "ufsphy";
- status = "disabled";
-
- ufsphy_lane: phy@627400 {
- reg = <0x627400 0x12c>,
- <0x627600 0x200>,
- <0x627c00 0x1b4>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
- };
-
- camss: camss@a34000 {
- compatible = "qcom,msm8996-camss";
- reg = <0x00a34000 0x1000>,
- <0x00a00030 0x4>,
- <0x00a35000 0x1000>,
- <0x00a00038 0x4>,
- <0x00a36000 0x1000>,
- <0x00a00040 0x4>,
- <0x00a30000 0x100>,
- <0x00a30400 0x100>,
- <0x00a30800 0x100>,
- <0x00a30c00 0x100>,
- <0x00a31000 0x500>,
- <0x00a00020 0x10>,
- <0x00a10000 0x1000>,
- <0x00a14000 0x1000>;
- reg-names = "csiphy0",
- "csiphy0_clk_mux",
- "csiphy1",
- "csiphy1_clk_mux",
- "csiphy2",
- "csiphy2_clk_mux",
- "csid0",
- "csid1",
- "csid2",
- "csid3",
- "ispif",
- "csi_clk_mux",
- "vfe0",
- "vfe1";
- interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "csiphy0",
- "csiphy1",
- "csiphy2",
- "csid0",
- "csid1",
- "csid2",
- "csid3",
- "ispif",
- "vfe0",
- "vfe1";
- power-domains = <&mmcc VFE0_GDSC>,
- <&mmcc VFE1_GDSC>;
- clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
- <&mmcc CAMSS_ISPIF_AHB_CLK>,
- <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI0_AHB_CLK>,
- <&mmcc CAMSS_CSI0_CLK>,
- <&mmcc CAMSS_CSI0PHY_CLK>,
- <&mmcc CAMSS_CSI0PIX_CLK>,
- <&mmcc CAMSS_CSI0RDI_CLK>,
- <&mmcc CAMSS_CSI1_AHB_CLK>,
- <&mmcc CAMSS_CSI1_CLK>,
- <&mmcc CAMSS_CSI1PHY_CLK>,
- <&mmcc CAMSS_CSI1PIX_CLK>,
- <&mmcc CAMSS_CSI1RDI_CLK>,
- <&mmcc CAMSS_CSI2_AHB_CLK>,
- <&mmcc CAMSS_CSI2_CLK>,
- <&mmcc CAMSS_CSI2PHY_CLK>,
- <&mmcc CAMSS_CSI2PIX_CLK>,
- <&mmcc CAMSS_CSI2RDI_CLK>,
- <&mmcc CAMSS_CSI3_AHB_CLK>,
- <&mmcc CAMSS_CSI3_CLK>,
- <&mmcc CAMSS_CSI3PHY_CLK>,
- <&mmcc CAMSS_CSI3PIX_CLK>,
- <&mmcc CAMSS_CSI3RDI_CLK>,
- <&mmcc CAMSS_AHB_CLK>,
- <&mmcc CAMSS_VFE0_CLK>,
- <&mmcc CAMSS_CSI_VFE0_CLK>,
- <&mmcc CAMSS_VFE0_AHB_CLK>,
- <&mmcc CAMSS_VFE0_STREAM_CLK>,
- <&mmcc CAMSS_VFE1_CLK>,
- <&mmcc CAMSS_CSI_VFE1_CLK>,
- <&mmcc CAMSS_VFE1_AHB_CLK>,
- <&mmcc CAMSS_VFE1_STREAM_CLK>,
- <&mmcc CAMSS_VFE_AHB_CLK>,
- <&mmcc CAMSS_VFE_AXI_CLK>;
- clock-names = "top_ahb",
- "ispif_ahb",
- "csiphy0_timer",
- "csiphy1_timer",
- "csiphy2_timer",
- "csi0_ahb",
- "csi0",
- "csi0_phy",
- "csi0_pix",
- "csi0_rdi",
- "csi1_ahb",
- "csi1",
- "csi1_phy",
- "csi1_pix",
- "csi1_rdi",
- "csi2_ahb",
- "csi2",
- "csi2_phy",
- "csi2_pix",
- "csi2_rdi",
- "csi3_ahb",
- "csi3",
- "csi3_phy",
- "csi3_pix",
- "csi3_rdi",
- "ahb",
- "vfe0",
- "csi_vfe0",
- "vfe0_ahb",
- "vfe0_stream",
- "vfe1",
- "csi_vfe1",
- "vfe1_ahb",
- "vfe1_stream",
- "vfe_ahb",
- "vfe_axi";
- iommus = <&vfe_smmu 0>,
- <&vfe_smmu 1>,
- <&vfe_smmu 2>,
- <&vfe_smmu 3>;
- status = "disabled";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- cci: cci@a0c000 {
- compatible = "qcom,msm8996-cci";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xa0c000 0x1000>;
- interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
- power-domains = <&mmcc CAMSS_GDSC>;
- clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
- <&mmcc CAMSS_CCI_AHB_CLK>,
- <&mmcc CAMSS_CCI_CLK>,
- <&mmcc CAMSS_AHB_CLK>;
- clock-names = "camss_top_ahb",
- "cci_ahb",
- "cci",
- "camss_ahb";
- assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
- <&mmcc CAMSS_CCI_CLK>;
- assigned-clock-rates = <80000000>, <37500000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cci0_default &cci1_default>;
- status = "disabled";
-
- cci_i2c0: i2c-bus@0 {
- reg = <0>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cci_i2c1: i2c-bus@1 {
- reg = <1>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- adreno_smmu: iommu@b40000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
- reg = <0x00b40000 0x10000>;
-
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
- #iommu-cells = <1>;
-
- clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>,
- <&mmcc GPU_AHB_CLK>;
- clock-names = "bus", "iface";
-
- power-domains = <&mmcc GPU_GDSC>;
- };
-
- venus: video-codec@c00000 {
- compatible = "qcom,msm8996-venus";
- reg = <0x00c00000 0xff000>;
- interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&mmcc VENUS_GDSC>;
- clocks = <&mmcc VIDEO_CORE_CLK>,
- <&mmcc VIDEO_AHB_CLK>,
- <&mmcc VIDEO_AXI_CLK>,
- <&mmcc VIDEO_MAXI_CLK>;
- clock-names = "core", "iface", "bus", "mbus";
- interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>,
- <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>;
- interconnect-names = "video-mem", "cpu-cfg";
- iommus = <&venus_smmu 0x00>,
- <&venus_smmu 0x01>,
- <&venus_smmu 0x0a>,
- <&venus_smmu 0x07>,
- <&venus_smmu 0x0e>,
- <&venus_smmu 0x0f>,
- <&venus_smmu 0x08>,
- <&venus_smmu 0x09>,
- <&venus_smmu 0x0b>,
- <&venus_smmu 0x0c>,
- <&venus_smmu 0x0d>,
- <&venus_smmu 0x10>,
- <&venus_smmu 0x11>,
- <&venus_smmu 0x21>,
- <&venus_smmu 0x28>,
- <&venus_smmu 0x29>,
- <&venus_smmu 0x2b>,
- <&venus_smmu 0x2c>,
- <&venus_smmu 0x2d>,
- <&venus_smmu 0x31>;
- memory-region = <&venus_mem>;
- status = "disabled";
-
- video-decoder {
- compatible = "venus-decoder";
- clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
- clock-names = "core";
- power-domains = <&mmcc VENUS_CORE0_GDSC>;
- };
-
- video-encoder {
- compatible = "venus-encoder";
- clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
- clock-names = "core";
- power-domains = <&mmcc VENUS_CORE1_GDSC>;
- };
- };
-
- mdp_smmu: iommu@d00000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0x00d00000 0x10000>;
-
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
- #iommu-cells = <1>;
- clocks = <&mmcc SMMU_MDP_AXI_CLK>,
- <&mmcc SMMU_MDP_AHB_CLK>;
- clock-names = "bus", "iface";
-
- power-domains = <&mmcc MDSS_GDSC>;
- };
-
- venus_smmu: iommu@d40000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0x00d40000 0x20000>;
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
- clocks = <&mmcc SMMU_VIDEO_AXI_CLK>,
- <&mmcc SMMU_VIDEO_AHB_CLK>;
- clock-names = "bus", "iface";
- #iommu-cells = <1>;
- status = "okay";
- };
-
- vfe_smmu: iommu@da0000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0x00da0000 0x10000>;
-
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
- clocks = <&mmcc SMMU_VFE_AXI_CLK>,
- <&mmcc SMMU_VFE_AHB_CLK>;
- clock-names = "bus", "iface";
- #iommu-cells = <1>;
- };
-
- lpass_q6_smmu: iommu@1600000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0x01600000 0x20000>;
- #iommu-cells = <1>;
- power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
-
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>,
- <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>;
- clock-names = "bus", "iface";
- };
-
- slpi_pil: remoteproc@1c00000 {
- compatible = "qcom,msm8996-slpi-pil";
- reg = <0x01c00000 0x4000>;
-
- interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
- <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog",
- "fatal",
- "ready",
- "handover",
- "stop-ack";
-
- clocks = <&xo_board>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- clock-names = "xo", "aggre2";
-
- memory-region = <&slpi_mem>;
-
- qcom,smem-states = <&slpi_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- power-domains = <&rpmpd MSM8996_VDDSSCX>;
- power-domain-names = "ssc_cx";
-
- status = "disabled";
-
- smd-edge {
- interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
-
- label = "dsps";
- mboxes = <&apcs_glb 25>;
- qcom,smd-edge = <3>;
- qcom,remote-pid = <3>;
- };
- };
-
- mss_pil: remoteproc@2080000 {
- compatible = "qcom,msm8996-mss-pil";
- reg = <0x2080000 0x100>,
- <0x2180000 0x020>;
- reg-names = "qdsp6", "rmb";
-
- interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>,
- <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
- <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack",
- "shutdown-ack";
-
- clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
- <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
- <&gcc GCC_BOOT_ROM_AHB_CLK>,
- <&xo_board>,
- <&gcc GCC_MSS_GPLL0_DIV_CLK>,
- <&gcc GCC_MSS_SNOC_AXI_CLK>,
- <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
- <&rpmcc RPM_SMD_PCNOC_CLK>,
- <&rpmcc RPM_SMD_QDSS_CLK>;
- clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
- "snoc_axi", "mnoc_axi", "pnoc", "qdss";
-
- resets = <&gcc GCC_MSS_RESTART>;
- reset-names = "mss_restart";
-
- power-domains = <&rpmpd MSM8996_VDDCX>,
- <&rpmpd MSM8996_VDDMX>;
- power-domain-names = "cx", "mx";
-
- qcom,smem-states = <&mpss_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>;
-
- status = "disabled";
-
- mba {
- memory-region = <&mba_mem>;
- };
-
- mpss {
- memory-region = <&mpss_mem>;
- };
-
- metadata {
- memory-region = <&mdata_mem>;
- };
-
- smd-edge {
- interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
-
- label = "mpss";
- mboxes = <&apcs_glb 12>;
- qcom,smd-edge = <0>;
- qcom,remote-pid = <1>;
- };
- };
-
- stm@3002000 {
- compatible = "arm,coresight-stm", "arm,primecell";
- reg = <0x3002000 0x1000>,
- <0x8280000 0x180000>;
- reg-names = "stm-base", "stm-stimulus-base";
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- out-ports {
- port {
- stm_out: endpoint {
- remote-endpoint =
- <&funnel0_in>;
- };
- };
- };
- };
-
- tpiu@3020000 {
- compatible = "arm,coresight-tpiu", "arm,primecell";
- reg = <0x3020000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- in-ports {
- port {
- tpiu_in: endpoint {
- remote-endpoint =
- <&replicator_out1>;
- };
- };
- };
- };
-
- funnel@3021000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3021000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@7 {
- reg = <7>;
- funnel0_in: endpoint {
- remote-endpoint =
- <&stm_out>;
- };
- };
- };
-
- out-ports {
- port {
- funnel0_out: endpoint {
- remote-endpoint =
- <&merge_funnel_in0>;
- };
- };
- };
- };
-
- funnel@3022000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3022000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@6 {
- reg = <6>;
- funnel1_in: endpoint {
- remote-endpoint =
- <&apss_merge_funnel_out>;
- };
- };
- };
-
- out-ports {
- port {
- funnel1_out: endpoint {
- remote-endpoint =
- <&merge_funnel_in1>;
- };
- };
- };
- };
-
- funnel@3023000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3023000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
-
- out-ports {
- port {
- funnel2_out: endpoint {
- remote-endpoint =
- <&merge_funnel_in2>;
- };
- };
- };
- };
-
- funnel@3025000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3025000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- merge_funnel_in0: endpoint {
- remote-endpoint =
- <&funnel0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- merge_funnel_in1: endpoint {
- remote-endpoint =
- <&funnel1_out>;
- };
- };
-
- port@2 {
- reg = <2>;
- merge_funnel_in2: endpoint {
- remote-endpoint =
- <&funnel2_out>;
- };
- };
- };
-
- out-ports {
- port {
- merge_funnel_out: endpoint {
- remote-endpoint =
- <&etf_in>;
- };
- };
- };
- };
-
- replicator@3026000 {
- compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
- reg = <0x3026000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- in-ports {
- port {
- replicator_in: endpoint {
- remote-endpoint =
- <&etf_out>;
- };
- };
- };
-
- out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- replicator_out0: endpoint {
- remote-endpoint =
- <&etr_in>;
- };
- };
-
- port@1 {
- reg = <1>;
- replicator_out1: endpoint {
- remote-endpoint =
- <&tpiu_in>;
- };
- };
- };
- };
-
- etf@3027000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x3027000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- in-ports {
- port {
- etf_in: endpoint {
- remote-endpoint =
- <&merge_funnel_out>;
- };
- };
- };
-
- out-ports {
- port {
- etf_out: endpoint {
- remote-endpoint =
- <&replicator_in>;
- };
- };
- };
- };
-
- etr@3028000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x3028000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,scatter-gather;
-
- in-ports {
- port {
- etr_in: endpoint {
- remote-endpoint =
- <&replicator_out0>;
- };
- };
- };
- };
-
- debug@3810000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x3810000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU0>;
- };
-
- etm@3840000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x3840000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- cpu = <&CPU0>;
-
- out-ports {
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&apss_funnel0_in0>;
- };
- };
- };
- };
-
- debug@3910000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x3910000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU1>;
- };
-
- etm@3940000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x3940000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- cpu = <&CPU1>;
-
- out-ports {
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&apss_funnel0_in1>;
- };
- };
- };
- };
-
- funnel@39b0000 { /* APSS Funnel 0 */
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x39b0000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- apss_funnel0_in0: endpoint {
- remote-endpoint = <&etm0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- apss_funnel0_in1: endpoint {
- remote-endpoint = <&etm1_out>;
- };
- };
- };
-
- out-ports {
- port {
- apss_funnel0_out: endpoint {
- remote-endpoint =
- <&apss_merge_funnel_in0>;
- };
- };
- };
- };
-
- debug@3a10000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x3a10000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU2>;
- };
-
- etm@3a40000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x3a40000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- cpu = <&CPU2>;
-
- out-ports {
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&apss_funnel1_in0>;
- };
- };
- };
- };
-
- debug@3b10000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x3b10000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU3>;
- };
-
- etm@3b40000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x3b40000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- cpu = <&CPU3>;
-
- out-ports {
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&apss_funnel1_in1>;
- };
- };
- };
- };
-
- funnel@3bb0000 { /* APSS Funnel 1 */
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3bb0000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- apss_funnel1_in0: endpoint {
- remote-endpoint = <&etm2_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- apss_funnel1_in1: endpoint {
- remote-endpoint = <&etm3_out>;
- };
- };
- };
-
- out-ports {
- port {
- apss_funnel1_out: endpoint {
- remote-endpoint =
- <&apss_merge_funnel_in1>;
- };
- };
- };
- };
-
- funnel@3bc0000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3bc0000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- apss_merge_funnel_in0: endpoint {
- remote-endpoint =
- <&apss_funnel0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- apss_merge_funnel_in1: endpoint {
- remote-endpoint =
- <&apss_funnel1_out>;
- };
- };
- };
-
- out-ports {
- port {
- apss_merge_funnel_out: endpoint {
- remote-endpoint =
- <&funnel1_in>;
- };
- };
- };
- };
-
- kryocc: clock-controller@6400000 {
- compatible = "qcom,msm8996-apcc";
- reg = <0x06400000 0x90000>;
-
- clock-names = "xo", "sys_apcs_aux";
- clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
-
- #clock-cells = <1>;
- };
-
- usb3: usb@6af8800 {
- compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0x06af8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq";
-
- clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>,
- <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
- <&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>;
- clock-names = "cfg_noc",
- "core",
- "iface",
- "sleep",
- "mock_utmi";
-
- assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <120000000>;
-
- interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>,
- <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>;
- interconnect-names = "usb-ddr", "apps-usb";
-
- power-domains = <&gcc USB30_GDSC>;
- status = "disabled";
-
- usb3_dwc3: usb@6a00000 {
- compatible = "snps,dwc3";
- reg = <0x06a00000 0xcc00>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&hsusb_phy1>, <&ssusb_phy_0>;
- phy-names = "usb2-phy", "usb3-phy";
- snps,hird-threshold = /bits/ 8 <0>;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- snps,is-utmi-l1-suspend;
- tx-fifo-resize;
- };
- };
-
- usb3phy: phy@7410000 {
- compatible = "qcom,msm8996-qmp-usb3-phy";
- reg = <0x07410000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
-
- resets = <&gcc GCC_USB3_PHY_BCR>,
- <&gcc GCC_USB3PHY_PHY_BCR>;
- reset-names = "phy", "common";
- status = "disabled";
-
- ssusb_phy_0: phy@7410200 {
- reg = <0x07410200 0x200>,
- <0x07410400 0x130>,
- <0x07410600 0x1a8>;
- #phy-cells = <0>;
-
- #clock-cells = <0>;
- clock-output-names = "usb3_phy_pipe_clk_src";
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- };
- };
-
- hsusb_phy1: phy@7411000 {
- compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x07411000 0x180>;
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_RX1_USB2_CLKREF_CLK>;
- clock-names = "cfg_ahb", "ref";
-
- resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
- nvmem-cells = <&qusb2p_hstx_trim>;
- status = "disabled";
- };
-
- hsusb_phy2: phy@7412000 {
- compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x07412000 0x180>;
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_RX2_USB2_CLKREF_CLK>;
- clock-names = "cfg_ahb", "ref";
-
- resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
- nvmem-cells = <&qusb2s_hstx_trim>;
- status = "disabled";
- };
-
- sdhc1: mmc@7464900 {
- compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
- reg = <0x07464900 0x11c>, <0x07464000 0x800>;
- reg-names = "hc", "core";
-
- interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clock-names = "iface", "core", "xo";
- clocks = <&gcc GCC_SDCC1_AHB_CLK>,
- <&gcc GCC_SDCC1_APPS_CLK>,
- <&rpmcc RPM_SMD_XO_CLK_SRC>;
- resets = <&gcc GCC_SDCC1_BCR>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_state_on>;
- pinctrl-1 = <&sdc1_state_off>;
-
- bus-width = <8>;
- non-removable;
- status = "disabled";
- };
-
- sdhc2: mmc@74a4900 {
- compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
- reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
- reg-names = "hc", "core";
-
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clock-names = "iface", "core", "xo";
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&rpmcc RPM_SMD_XO_CLK_SRC>;
- resets = <&gcc GCC_SDCC2_BCR>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_state_on>;
- pinctrl-1 = <&sdc2_state_off>;
-
- bus-width = <4>;
- status = "disabled";
- };
-
- blsp1_dma: dma-controller@7544000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x07544000 0x2b000>;
- interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "bam_clk";
- qcom,controlled-remotely;
- #dma-cells = <1>;
- qcom,ee = <0>;
- };
-
- blsp1_uart2: serial@7570000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x07570000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
- dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- blsp1_spi1: spi@7575000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x07575000 0x600>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_spi1_default>;
- pinctrl-1 = <&blsp1_spi1_sleep>;
- dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp1_i2c3: i2c@7577000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x07577000 0x1000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_i2c3_default>;
- pinctrl-1 = <&blsp1_i2c3_sleep>;
- dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp1_i2c6: i2c@757a000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x757a000 0x1000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_i2c6_default>;
- pinctrl-1 = <&blsp1_i2c6_sleep>;
- dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_dma: dma-controller@7584000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x07584000 0x2b000>;
- interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "bam_clk";
- qcom,controlled-remotely;
- #dma-cells = <1>;
- qcom,ee = <0>;
- };
-
- blsp2_uart2: serial@75b0000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x075b0000 0x1000>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- blsp2_uart3: serial@75b1000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x075b1000 0x1000>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- blsp2_i2c1: i2c@75b5000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x075b5000 0x1000>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c1_default>;
- pinctrl-1 = <&blsp2_i2c1_sleep>;
- dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_i2c2: i2c@75b6000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x075b6000 0x1000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c2_default>;
- pinctrl-1 = <&blsp2_i2c2_sleep>;
- dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_i2c3: i2c@75b7000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x075b7000 0x1000>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c3_default>;
- pinctrl-1 = <&blsp2_i2c3_sleep>;
- dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_i2c5: i2c@75b9000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x75b9000 0x1000>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp2_i2c5_default>;
- dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_i2c6: i2c@75ba000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x75ba000 0x1000>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c6_default>;
- pinctrl-1 = <&blsp2_i2c6_sleep>;
- dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_spi6: spi@75ba000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x075ba000 0x600>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_spi6_default>;
- pinctrl-1 = <&blsp2_spi6_sleep>;
- dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- usb2: usb@76f8800 {
- compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0x076f8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq";
-
- clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
- <&gcc GCC_USB20_MASTER_CLK>,
- <&gcc GCC_USB20_MOCK_UTMI_CLK>,
- <&gcc GCC_USB20_SLEEP_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
- clock-names = "cfg_noc",
- "core",
- "iface",
- "sleep",
- "mock_utmi";
-
- assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
- <&gcc GCC_USB20_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <60000000>;
-
- power-domains = <&gcc USB30_GDSC>;
- qcom,select-utmi-as-pipe-clk;
- status = "disabled";
-
- usb2_dwc3: usb@7600000 {
- compatible = "snps,dwc3";
- reg = <0x07600000 0xcc00>;
- interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&hsusb_phy2>;
- phy-names = "usb2-phy";
- maximum-speed = "high-speed";
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- };
- };
-
- slimbam: dma-controller@9184000 {
- compatible = "qcom,bam-v1.7.0";
- qcom,controlled-remotely;
- reg = <0x09184000 0x32000>;
- num-channels = <31>;
- interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- qcom,ee = <1>;
- qcom,num-ees = <2>;
- };
-
- slim_msm: slim-ngd@91c0000 {
- compatible = "qcom,slim-ngd-v1.5.0";
- reg = <0x091c0000 0x2c000>;
- interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&slimbam 3>, <&slimbam 4>;
- dma-names = "rx", "tx";
- #address-cells = <1>;
- #size-cells = <0>;
-
- status = "disabled";
- };
-
- adsp_pil: remoteproc@9300000 {
- compatible = "qcom,msm8996-adsp-pil";
- reg = <0x09300000 0x80000>;
-
- interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
- clock-names = "xo";
-
- memory-region = <&adsp_mem>;
-
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- power-domains = <&rpmpd MSM8996_VDDCX>;
- power-domain-names = "cx";
-
- status = "disabled";
-
- smd-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
- label = "lpass";
- mboxes = <&apcs_glb 8>;
- qcom,smd-edge = <1>;
- qcom,remote-pid = <2>;
-
- apr {
- power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
- compatible = "qcom,apr-v2";
- qcom,smd-channels = "apr_audio_svc";
- qcom,domain = <APR_DOMAIN_ADSP>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- service@3 {
- reg = <APR_SVC_ADSP_CORE>;
- compatible = "qcom,q6core";
- };
-
- q6afe: service@4 {
- compatible = "qcom,q6afe";
- reg = <APR_SVC_AFE>;
- q6afedai: dais {
- compatible = "qcom,q6afe-dais";
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <1>;
- dai@1 {
- reg = <1>;
- };
- };
- };
-
- q6asm: service@7 {
- compatible = "qcom,q6asm";
- reg = <APR_SVC_ASM>;
- q6asmdai: dais {
- compatible = "qcom,q6asm-dais";
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <1>;
- iommus = <&lpass_q6_smmu 1>;
- };
- };
-
- q6adm: service@8 {
- compatible = "qcom,q6adm";
- reg = <APR_SVC_ADM>;
- q6routing: routing {
- compatible = "qcom,q6adm-routing";
- #sound-dai-cells = <0>;
- };
- };
- };
- };
- };
-
- apcs_glb: mailbox@9820000 {
- compatible = "qcom,msm8996-apcs-hmss-global";
- reg = <0x09820000 0x1000>;
-
- #mbox-cells = <1>;
- #clock-cells = <0>;
- };
-
- timer@9840000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0x09840000 0x1000>;
- clock-frequency = <19200000>;
-
- frame@9850000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09850000 0x1000>,
- <0x09860000 0x1000>;
- };
-
- frame@9870000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09870000 0x1000>;
- status = "disabled";
- };
-
- frame@9880000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09880000 0x1000>;
- status = "disabled";
- };
-
- frame@9890000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09890000 0x1000>;
- status = "disabled";
- };
-
- frame@98a0000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x098a0000 0x1000>;
- status = "disabled";
- };
-
- frame@98b0000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x098b0000 0x1000>;
- status = "disabled";
- };
-
- frame@98c0000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x098c0000 0x1000>;
- status = "disabled";
- };
- };
-
- saw3: syscon@9a10000 {
- compatible = "syscon";
- reg = <0x09a10000 0x1000>;
- };
-
- cbf: clock-controller@9a11000 {
- compatible = "qcom,msm8996-cbf";
- reg = <0x09a11000 0x10000>;
- clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
- #clock-cells = <0>;
- #interconnect-cells = <1>;
- };
-
- intc: interrupt-controller@9bc0000 {
- compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
- #interrupt-cells = <3>;
- interrupt-controller;
- #redistributor-regions = <1>;
- redistributor-stride = <0x0 0x40000>;
- reg = <0x09bc0000 0x10000>,
- <0x09c00000 0x100000>;
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- sound: sound {
- };
-
- thermal-zones {
- cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 3>;
-
- trips {
- cpu0_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu0_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 5>;
-
- trips {
- cpu1_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu1_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 8>;
-
- trips {
- cpu2_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu2_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 10>;
-
- trips {
- cpu3_alert0: trip-point0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu3_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- gpu-top-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 6>;
-
- trips {
- gpu1_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "passive";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&gpu1_alert0>;
- cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-
- gpu-bottom-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 7>;
-
- trips {
- gpu2_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "passive";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&gpu2_alert0>;
- cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-
- m4m-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 1>;
-
- trips {
- m4m_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- l3-or-venus-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 2>;
-
- trips {
- l3_or_venus_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- cluster0-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 7>;
-
- trips {
- cluster0_l2_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- cluster1-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 12>;
-
- trips {
- cluster1_l2_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 1>;
-
- trips {
- camera_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- q6-dsp-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 2>;
-
- trips {
- q6_dsp_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- mem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 3>;
-
- trips {
- mem_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- modemtx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 4>;
-
- trips {
- modemtx_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
- };
-};
deleted file mode 100644
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-
- pm8916_0: pmic@0 {
- compatible = "qcom,pm8916", "qcom,spmi-pmic";
- reg = <0x0 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pon@800 {
- compatible = "qcom,pm8916-pon";
- reg = <0x800>;
- mode-bootloader = <0x2>;
- mode-recovery = <0x1>;
-
- pwrkey {
- compatible = "qcom,pm8941-pwrkey";
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_POWER>;
- };
-
- pm8916_resin: resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- status = "disabled";
- };
-
- watchdog {
- compatible = "qcom,pm8916-wdt";
- interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
- timeout-sec = <60>;
- };
- };
-
- pm8916_usbin: usb-detect@1300 {
- compatible = "qcom,pm8941-misc";
- reg = <0x1300>;
- interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "usb_vbus";
- status = "disabled";
- };
-
- pm8916_temp: temp-alarm@2400 {
- compatible = "qcom,spmi-temp-alarm";
- reg = <0x2400>;
- interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
- io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
- io-channel-names = "thermal";
- #thermal-sensor-cells = <0>;
- };
-
- pm8916_vadc: adc@3100 {
- compatible = "qcom,spmi-vadc";
- reg = <0x3100>;
- interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- #io-channel-cells = <1>;
-
- channel@0 {
- reg = <VADC_USBIN>;
- qcom,pre-scaling = <1 10>;
- };
- channel@7 {
- reg = <VADC_VSYS>;
- qcom,pre-scaling = <1 3>;
- };
- channel@8 {
- reg = <VADC_DIE_TEMP>;
- };
- channel@9 {
- reg = <VADC_REF_625MV>;
- };
- channel@a {
- reg = <VADC_REF_1250MV>;
- };
- channel@e {
- reg = <VADC_GND_REF>;
- };
- channel@f {
- reg = <VADC_VDD_VADC>;
- };
- };
-
- rtc@6000 {
- compatible = "qcom,pm8941-rtc";
- reg = <0x6000>, <0x6100>;
- reg-names = "rtc", "alarm";
- interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
- };
-
- pm8916_mpps: mpps@a000 {
- compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp";
- reg = <0xa000>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8916_mpps 0 0 4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pm8916_gpios: gpio@c000 {
- compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
- reg = <0xc000>;
- gpio-controller;
- gpio-ranges = <&pm8916_gpios 0 0 4>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- pm8916_1: pmic@1 {
- compatible = "qcom,pm8916", "qcom,spmi-pmic";
- reg = <0x1 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8916_pwm: pwm {
- compatible = "qcom,pm8916-pwm";
-
- #pwm-cells = <2>;
-
- status = "disabled";
- };
-
- pm8916_vib: vibrator@c000 {
- compatible = "qcom,pm8916-vib";
- reg = <0xc000>;
- status = "disabled";
- };
-
- pm8916_codec: audio-codec@f000 {
- compatible = "qcom,pm8916-wcd-analog-codec";
- reg = <0xf000>;
- interrupt-parent = <&spmi_bus>;
- interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
- <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
- <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
- interrupt-names = "cdc_spk_cnp_int",
- "cdc_spk_clip_int",
- "cdc_spk_ocp_int",
- "mbhc_ins_rem_det1",
- "mbhc_but_rel_det",
- "mbhc_but_press_det",
- "mbhc_ins_rem_det",
- "mbhc_switch_int",
- "cdc_ear_ocp_int",
- "cdc_hphr_ocp_int",
- "cdc_hphl_ocp_det",
- "cdc_ear_cnp_int",
- "cdc_hphr_cnp_int",
- "cdc_hphl_cnp_int";
- #sound-dai-cells = <1>;
- status = "disabled";
- };
- };
-};
deleted file mode 100644
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-/ {
- thermal-zones {
- pm8994-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&pm8994_temp>;
-
- trips {
- pm8994_alert0: pm8994-alert0 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
- pm8994_crit: pm8994-crit {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-};
-
-&spmi_bus {
-
- pmic@0 {
- compatible = "qcom,pm8994", "qcom,spmi-pmic";
- reg = <0x0 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- rtc@6000 {
- compatible = "qcom,pm8941-rtc";
- reg = <0x6000>, <0x6100>;
- reg-names = "rtc", "alarm";
- interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
- };
-
- pm8994_pon: pon@800 {
- compatible = "qcom,pm8916-pon";
- reg = <0x800>;
- mode-bootloader = <0x2>;
- mode-recovery = <0x1>;
-
- pwrkey {
- compatible = "qcom,pm8941-pwrkey";
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_POWER>;
- };
-
- pm8994_resin: resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- status = "disabled";
- };
- };
-
- pm8994_temp: temp-alarm@2400 {
- compatible = "qcom,spmi-temp-alarm";
- reg = <0x2400>;
- interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
- io-channels = <&pm8994_vadc VADC_DIE_TEMP>;
- io-channel-names = "thermal";
- #thermal-sensor-cells = <0>;
- };
-
- pm8994_vadc: adc@3100 {
- compatible = "qcom,spmi-vadc";
- reg = <0x3100>;
- interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- #io-channel-cells = <1>;
-
- channel@7 {
- reg = <VADC_VSYS>;
- qcom,pre-scaling = <1 3>;
- label = "vph_pwr";
- };
- channel@8 {
- reg = <VADC_DIE_TEMP>;
- label = "die_temp";
- };
- channel@9 {
- reg = <VADC_REF_625MV>;
- label = "ref_625mv";
- };
- channel@a {
- reg = <VADC_REF_1250MV>;
- label = "ref_1250mv";
- };
- channel@e {
- reg = <VADC_GND_REF>;
- };
- channel@f {
- reg = <VADC_VDD_VADC>;
- };
- };
-
- pm8994_gpios: gpio@c000 {
- compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio";
- reg = <0xc000>;
- gpio-controller;
- gpio-ranges = <&pm8994_gpios 0 0 22>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pm8994_mpps: mpps@a000 {
- compatible = "qcom,pm8994-mpp", "qcom,spmi-mpp";
- reg = <0xa000>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8994_mpps 0 0 8>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- pmic@1 {
- compatible = "qcom,pm8994", "qcom,spmi-pmic";
- reg = <0x1 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8994_lpg: pwm {
- compatible = "qcom,pm8994-lpg";
-
- #address-cells = <1>;
- #size-cells = <0>;
- #pwm-cells = <2>;
-
- status = "disabled";
- };
-
- pm8994_spmi_regulators: regulators {
- compatible = "qcom,pm8994-regulators";
- };
- };
-};
deleted file mode 100644
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/* Copyright 2018 Google LLC. */
-
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- thermal-zones {
- pm8998-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&pm8998_temp>;
-
- trips {
- pm8998_alert0: pm8998-alert0 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "passive";
- };
- pm8998_crit: pm8998-crit {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-};
-
-&spmi_bus {
- pm8998_lsid0: pmic@0 {
- compatible = "qcom,pm8998", "qcom,spmi-pmic";
- reg = <0x0 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8998_pon: pon@800 {
- compatible = "qcom,pm8998-pon";
-
- reg = <0x800>;
- mode-bootloader = <0x2>;
- mode-recovery = <0x1>;
-
- pm8998_pwrkey: pwrkey {
- compatible = "qcom,pm8941-pwrkey";
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_POWER>;
- };
-
- pm8998_resin: resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- status = "disabled";
- };
- };
-
- pm8998_temp: temp-alarm@2400 {
- compatible = "qcom,spmi-temp-alarm";
- reg = <0x2400>;
- interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
- io-channels = <&pm8998_adc ADC5_DIE_TEMP>;
- io-channel-names = "thermal";
- #thermal-sensor-cells = <0>;
- };
-
- pm8998_coincell: charger@2800 {
- compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell";
- reg = <0x2800>;
-
- status = "disabled";
- };
-
- pm8998_adc: adc@3100 {
- compatible = "qcom,spmi-adc-rev2";
- reg = <0x3100>;
- interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- #io-channel-cells = <1>;
-
- channel@6 {
- reg = <ADC5_DIE_TEMP>;
- label = "die_temp";
- };
- };
-
- pm8998_adc_tm: adc-tm@3400 {
- compatible = "qcom,spmi-adc-tm-hc";
- reg = <0x3400>;
- interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
- #thermal-sensor-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- rtc@6000 {
- compatible = "qcom,pm8941-rtc";
- reg = <0x6000>, <0x6100>;
- reg-names = "rtc", "alarm";
- interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
- };
-
- pm8998_gpios: gpio@c000 {
- compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
- reg = <0xc000>;
- gpio-controller;
- gpio-ranges = <&pm8998_gpios 0 0 26>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- };
-
- pm8998_lsid1: pmic@1 {
- compatible = "qcom,pm8998", "qcom,spmi-pmic";
- reg = <0x1 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-};
deleted file mode 100644
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-
- pmic@2 {
- compatible = "qcom,pmi8994", "qcom,spmi-pmic";
- reg = <0x2 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pmi8994_gpios: gpio@c000 {
- compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
- reg = <0xc000>;
- gpio-controller;
- gpio-ranges = <&pmi8994_gpios 0 0 10>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pmi8994_mpps: mpps@a000 {
- compatible = "qcom,pmi8994-mpp", "qcom,spmi-mpp";
- reg = <0xa000>;
- gpio-controller;
- gpio-ranges = <&pmi8994_mpps 0 0 4>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- pmic@3 {
- compatible = "qcom,pmi8994", "qcom,spmi-pmic";
- reg = <0x3 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pmi8994_lpg: pwm {
- compatible = "qcom,pmi8994-lpg";
-
- #address-cells = <1>;
- #size-cells = <0>;
- #pwm-cells = <2>;
-
- status = "disabled";
- };
-
- pmi8994_spmi_regulators: regulators {
- compatible = "qcom,pmi8994-regulators";
- };
-
- pmi8994_wled: wled@d800 {
- compatible = "qcom,pmi8994-wled";
- reg = <0xd800>, <0xd900>;
- interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
- <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ovp", "short";
- qcom,cabc;
- qcom,external-pfet;
- status = "disabled";
- };
- };
-};
deleted file mode 100644
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
- pmi8998_lsid0: pmic@2 {
- compatible = "qcom,pmi8998", "qcom,spmi-pmic";
- reg = <0x2 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pmi8998_charger: charger@1000 {
- compatible = "qcom,pmi8998-charger";
- reg = <0x1000>;
-
- interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
- <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
- <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
- <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "usb-plugin",
- "bat-ov",
- "wdog-bark",
- "usbin-icl-change";
-
- io-channels = <&pmi8998_rradc 3>,
- <&pmi8998_rradc 4>;
- io-channel-names = "usbin_i", "usbin_v";
-
- status = "disabled";
- };
-
- pmi8998_gpios: gpio@c000 {
- compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
- reg = <0xc000>;
- gpio-controller;
- gpio-ranges = <&pmi8998_gpios 0 0 14>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pmi8998_rradc: adc@4500 {
- compatible = "qcom,pmi8998-rradc";
- reg = <0x4500>;
- #io-channel-cells = <1>;
- };
- };
-
- pmi8998_lsid1: pmic@3 {
- compatible = "qcom,pmi8998", "qcom,spmi-pmic";
- reg = <0x3 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- labibb {
- compatible = "qcom,pmi8998-lab-ibb";
-
- ibb: ibb {
- interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
- <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "sc-err", "ocp";
- };
-
- lab: lab {
- interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
- <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "sc-err", "ocp";
- };
- };
-
- pmi8998_lpg: pwm {
- compatible = "qcom,pmi8998-lpg";
-
- #address-cells = <1>;
- #size-cells = <0>;
- #pwm-cells = <2>;
-
- status = "disabled";
- };
-
- pmi8998_flash: led-controller@d300 {
- compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led";
- reg = <0xd300>;
- status = "disabled";
- };
-
- pmi8998_wled: leds@d800 {
- compatible = "qcom,pmi8998-wled";
- reg = <0xd800>, <0xd900>;
- interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
- <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ovp", "short";
- label = "backlight";
-
- status = "disabled";
- };
- };
-};
deleted file mode 100644
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, Linaro Limited
- */
-
-#include <dt-bindings/spmi/spmi.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- thermal-zones {
- pms405-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&pms405_temp>;
-
- trips {
- pms405_alert0: pms405-alert0 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "passive";
- };
- pms405_crit: pms405-crit {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-};
-
-&spmi_bus {
- pms405_0: pms405@0 {
- compatible = "qcom,pms405", "qcom,spmi-pmic";
- reg = <0x0 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pms405_gpios: gpio@c000 {
- compatible = "qcom,pms405-gpio", "qcom,spmi-gpio";
- reg = <0xc000>;
- gpio-controller;
- gpio-ranges = <&pms405_gpios 0 0 12>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pon@800 {
- compatible = "qcom,pms405-pon";
- reg = <0x0800>;
- mode-bootloader = <0x2>;
- mode-recovery = <0x1>;
-
- pwrkey {
- compatible = "qcom,pm8941-pwrkey";
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_POWER>;
- };
- };
-
- pms405_temp: temp-alarm@2400 {
- compatible = "qcom,spmi-temp-alarm";
- reg = <0x2400>;
- interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
- io-channels = <&pms405_adc ADC5_DIE_TEMP>;
- io-channel-names = "thermal";
- #thermal-sensor-cells = <0>;
- };
-
- pms405_adc: adc@3100 {
- compatible = "qcom,pms405-adc", "qcom,spmi-adc-rev2";
- reg = <0x3100>;
- interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- #io-channel-cells = <1>;
-
- channel@0 {
- reg = <ADC5_REF_GND>;
- qcom,pre-scaling = <1 1>;
- label = "ref_gnd";
- };
-
- channel@1 {
- reg = <ADC5_1P25VREF>;
- qcom,pre-scaling = <1 1>;
- label = "vref_1p25";
- };
-
- channel@131 {
- reg = <ADC5_VPH_PWR>;
- qcom,pre-scaling = <1 3>;
- label = "vph_pwr";
- };
-
- channel@6 {
- reg = <ADC5_DIE_TEMP>;
- qcom,pre-scaling = <1 1>;
- label = "die_temp";
- };
-
- channel@77 {
- reg = <ADC5_AMUX_THM1_100K_PU>;
- qcom,ratiometric;
- qcom,hw-settle-time = <200>;
- qcom,pre-scaling = <1 1>;
- label = "pa_therm1";
- };
-
- channel@79 {
- reg = <ADC5_AMUX_THM3_100K_PU>;
- qcom,ratiometric;
- qcom,hw-settle-time = <200>;
- qcom,pre-scaling = <1 1>;
- label = "pa_therm3";
- };
-
- channel@76 {
- reg = <ADC5_XO_THERM_100K_PU>;
- qcom,ratiometric;
- qcom,hw-settle-time = <200>;
- qcom,pre-scaling = <1 1>;
- label = "xo_therm";
- };
- };
-
- rtc@6000 {
- compatible = "qcom,pm8941-rtc";
- reg = <0x6000>, <0x6100>;
- reg-names = "rtc", "alarm";
- interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
- };
- };
-
- pms405_1: pms405@1 {
- compatible = "qcom,pms405", "qcom,spmi-pmic";
- reg = <0x1 SPMI_USID>;
-
- pms405_spmi_regulators: regulators {
- compatible = "qcom,pms405-regulators";
- };
- };
-};
deleted file mode 100644
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, Linaro Limited
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "qcs404-evb.dtsi"
-
-/ {
- model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
- compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb",
- "qcom,qcs404";
-};
-
-ðernet {
- status = "okay";
-
- snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 10000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <ðernet_defaults>;
-
- phy-handle = <&phy1>;
- phy-mode = "rgmii";
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- phy1: phy@4 {
- compatible = "ethernet-phy-ieee802.3-c22";
- device_type = "ethernet-phy";
- reg = <0x4>;
- };
- };
-};
-
-&tlmm {
- ethernet_defaults: ethernet-defaults-state {
- int-pins {
- pins = "gpio61";
- function = "rgmii_int";
- bias-disable;
- drive-strength = <2>;
- };
- mdc-pins {
- pins = "gpio76";
- function = "rgmii_mdc";
- bias-pull-up;
- };
- mdio-pins {
- pins = "gpio75";
- function = "rgmii_mdio";
- bias-pull-up;
- };
- tx-pins {
- pins = "gpio67", "gpio66", "gpio65", "gpio64";
- function = "rgmii_tx";
- bias-pull-up;
- drive-strength = <16>;
- };
- rx-pins {
- pins = "gpio73", "gpio72", "gpio71", "gpio70";
- function = "rgmii_rx";
- bias-disable;
- drive-strength = <2>;
- };
- tx-ctl-pins {
- pins = "gpio68";
- function = "rgmii_ctl";
- bias-pull-up;
- drive-strength = <16>;
- };
- rx-ctl-pins {
- pins = "gpio74";
- function = "rgmii_ctl";
- bias-disable;
- drive-strength = <2>;
- };
- tx-ck-pins {
- pins = "gpio63";
- function = "rgmii_ck";
- bias-pull-up;
- drive-strength = <16>;
- };
- rx-ck-pins {
- pins = "gpio69";
- function = "rgmii_ck";
- bias-disable;
- drive-strength = <2>;
- };
- };
-};
deleted file mode 100644
@@ -1,389 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, Linaro Limited
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include "qcs404.dtsi"
-#include "pms405.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
- aliases {
- serial0 = &blsp1_uart2;
- serial1 = &blsp1_uart3;
- };
-
- chosen {
- stdout-path = "serial0";
- };
-
- vph_pwr: vph-pwr-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vph_pwr";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_ch0_3p3:
- vdd_esmps3_3p3: vdd-esmps3-3p3-regulator {
- compatible = "regulator-fixed";
- regulator-name = "eSMPS3_3P3";
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- usb3_vbus_reg: regulator-usb3-vbus {
- compatible = "regulator-fixed";
- regulator-name = "VBUS_BOOST_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb_vbus_boost_pin>;
- vin-supply = <&vph_pwr>;
- enable-active-high;
-
- /* TODO: Drop this when introducing role switching */
- regulator-always-on;
- };
-};
-
-&blsp1_uart3 {
- status = "okay";
-
- bluetooth {
- compatible = "qcom,wcn3990-bt";
- vddio-supply = <&vreg_l6_1p8>;
- vddxo-supply = <&vreg_l5_1p8>;
- vddrf-supply = <&vreg_l1_1p3>;
- vddch0-supply = <&vdd_ch0_3p3>;
-
- local-bd-address = [ 02 00 00 00 5a ad ];
-
- max-speed = <3200000>;
- };
-};
-
-&blsp1_dma {
- qcom,controlled-remotely;
-};
-
-&blsp2_dma {
- qcom,controlled-remotely;
-};
-
-&gcc {
- protected-clocks = <GCC_BIMC_CDSP_CLK>,
- <GCC_CDSP_CFG_AHB_CLK>,
- <GCC_CDSP_BIMC_CLK_SRC>,
- <GCC_CDSP_TBU_CLK>,
- <141>, /* GCC_WCSS_Q6_AHB_CLK */
- <142>; /* GCC_WCSS_Q6_AXIM_CLK */
-};
-
-&pms405_spmi_regulators {
- vdd_s3-supply = <&vph_pwr>;
-
- pms405_s3: s3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vdd_apc";
- regulator-initial-mode = <1>;
- regulator-min-microvolt = <1048000>;
- regulator-max-microvolt = <1384000>;
- };
-};
-
-&pcie {
- status = "okay";
-
- perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&perst_state>;
-};
-
-&pcie_phy {
- status = "okay";
-
- vdda-vp-supply = <&vreg_l3_1p05>;
- vdda-vph-supply = <&vreg_l5_1p8>;
-};
-
-&remoteproc_adsp {
- status = "okay";
-};
-
-&remoteproc_cdsp {
- status = "okay";
-};
-
-&remoteproc_wcss {
- status = "okay";
-};
-
-&rpm_requests {
- regulators {
- compatible = "qcom,rpm-pms405-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
- vdd_s2-supply = <&vph_pwr>;
- vdd_s3-supply = <&vph_pwr>;
- vdd_s4-supply = <&vph_pwr>;
- vdd_s5-supply = <&vph_pwr>;
- vdd_l1_l2-supply = <&vreg_s5_1p35>;
- vdd_l3_l8-supply = <&vreg_s5_1p35>;
- vdd_l4-supply = <&vreg_s5_1p35>;
- vdd_l5_l6-supply = <&vreg_s4_1p8>;
- vdd_l7-supply = <&vph_pwr>;
- vdd_l9-supply = <&vreg_s5_1p35>;
- vdd_l10_l11_l12_l13-supply = <&vph_pwr>;
-
- vreg_s4_1p8: s4 {
- regulator-min-microvolt = <1728000>;
- regulator-max-microvolt = <1920000>;
- };
-
- vreg_s5_1p35: s5 {
- regulator-min-microvolt = <1352000>;
- regulator-max-microvolt = <1352000>;
- };
-
- vreg_l1_1p3: l1 {
- regulator-min-microvolt = <1240000>;
- regulator-max-microvolt = <1352000>;
- };
-
- vreg_l2_1p275: l2 {
- regulator-min-microvolt = <1048000>;
- regulator-max-microvolt = <1280000>;
- };
-
- vreg_l3_1p05: l3 {
- regulator-min-microvolt = <1048000>;
- regulator-max-microvolt = <1160000>;
- };
-
- vreg_l4_1p2: l4 {
- regulator-min-microvolt = <1144000>;
- regulator-max-microvolt = <1256000>;
- };
-
- vreg_l5_1p8: l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vreg_l6_1p8: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vreg_l7_1p8: l7 {
- regulator-min-microvolt = <1616000>;
- regulator-max-microvolt = <3000000>;
- };
-
- vreg_l8_1p2: l8 {
- regulator-min-microvolt = <1136000>;
- regulator-max-microvolt = <1352000>;
- };
-
- vreg_l10_3p3: l10 {
- regulator-min-microvolt = <2936000>;
- regulator-max-microvolt = <3088000>;
- };
-
- vreg_l11_sdc2: l11 {
- regulator-min-microvolt = <2696000>;
- regulator-max-microvolt = <3304000>;
- };
-
- vreg_l12_3p3: l12 {
- regulator-min-microvolt = <3050000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vreg_l13_3p3: l13 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- };
- };
-};
-
-&sdcc1 {
- status = "okay";
-
- supports-cqe;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- bus-width = <8>;
- non-removable;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_on>;
- pinctrl-1 = <&sdc1_off>;
-};
-
-&tlmm {
- perst_state: perst-state {
- pins = "gpio43";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
-
- sdc1_on: sdc1-on-state {
- clk-pins {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- cmd-pins {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- data-pins {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- rclk-pins {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
- };
-
- sdc1_off: sdc1-off-state {
- clk-pins {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- cmd-pins {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- data-pins {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- rclk-pins {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
- };
-
- usb3_id_pin: usb3-id-state {
- pins = "gpio116";
- function = "gpio";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-};
-
-&pms405_gpios {
- usb_vbus_boost_pin: usb-vbus-boost-state {
- pinconf {
- pins = "gpio3";
- function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
- power-source = <1>;
- };
- };
- usb3_vbus_pin: usb3-vbus-state {
- pinconf {
- pins = "gpio12";
- function = PMIC_GPIO_FUNC_NORMAL;
- input-enable;
- bias-pull-down;
- power-source = <1>;
- };
- };
-};
-
-&usb2 {
- status = "okay";
-};
-
-&usb2_phy_sec {
- vdd-supply = <&vreg_l4_1p2>;
- vdda1p8-supply = <&vreg_l5_1p8>;
- vdda3p3-supply = <&vreg_l12_3p3>;
- status = "okay";
-};
-
-&usb3 {
- status = "okay";
-
-};
-
-&usb3_dwc3 {
- dr_mode = "host";
-};
-
-&usb2_phy_prim {
- vdd-supply = <&vreg_l4_1p2>;
- vdda1p8-supply = <&vreg_l5_1p8>;
- vdda3p3-supply = <&vreg_l12_3p3>;
- status = "okay";
-};
-
-&usb3_phy {
- vdd-supply = <&vreg_l3_1p05>;
- vdda1p8-supply = <&vreg_l5_1p8>;
- status = "okay";
-};
-
-&wifi {
- status = "okay";
- vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>;
- vdd-1.8-xo-supply = <&vreg_l5_1p8>;
- vdd-1.3-rfa-supply = <&vreg_l1_1p3>;
-};
-
-/* PINCTRL - additions to nodes defined in qcs404.dtsi */
-
-&blsp1_uart2_default {
- rx-pins {
- drive-strength = <2>;
- bias-disable;
- };
-
- tx-pins {
- drive-strength = <2>;
- bias-disable;
- };
-};
-
-&blsp1_uart3_default {
- cts-pins {
- bias-disable;
- };
-
- rts-tx-pins {
- drive-strength = <2>;
- bias-disable;
- };
-
- rx-pins {
- bias-pull-up;
- };
-};
deleted file mode 100644
@@ -1,1829 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, Linaro Limited
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-qcs404.h>
-#include <dt-bindings/clock/qcom,turingcc-qcs404.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- interrupt-parent = <&intc>;
-
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- clocks {
- xo_board: xo-board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- };
-
- sleep_clk: sleep-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CPU0: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x100>;
- enable-method = "psci";
- cpu-idle-states = <&CPU_SLEEP_0>;
- next-level-cache = <&L2_0>;
- #cooling-cells = <2>;
- clocks = <&apcs_glb>;
- operating-points-v2 = <&cpu_opp_table>;
- power-domains = <&cpr>;
- power-domain-names = "cpr";
- };
-
- CPU1: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x101>;
- enable-method = "psci";
- cpu-idle-states = <&CPU_SLEEP_0>;
- next-level-cache = <&L2_0>;
- #cooling-cells = <2>;
- clocks = <&apcs_glb>;
- operating-points-v2 = <&cpu_opp_table>;
- power-domains = <&cpr>;
- power-domain-names = "cpr";
- };
-
- CPU2: cpu@102 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x102>;
- enable-method = "psci";
- cpu-idle-states = <&CPU_SLEEP_0>;
- next-level-cache = <&L2_0>;
- #cooling-cells = <2>;
- clocks = <&apcs_glb>;
- operating-points-v2 = <&cpu_opp_table>;
- power-domains = <&cpr>;
- power-domain-names = "cpr";
- };
-
- CPU3: cpu@103 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x103>;
- enable-method = "psci";
- cpu-idle-states = <&CPU_SLEEP_0>;
- next-level-cache = <&L2_0>;
- #cooling-cells = <2>;
- clocks = <&apcs_glb>;
- operating-points-v2 = <&cpu_opp_table>;
- power-domains = <&cpr>;
- power-domain-names = "cpr";
- };
-
- L2_0: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- };
-
- idle-states {
- entry-method = "psci";
-
- CPU_SLEEP_0: cpu-sleep-0 {
- compatible = "arm,idle-state";
- idle-state-name = "standalone-power-collapse";
- arm,psci-suspend-param = <0x40000003>;
- entry-latency-us = <125>;
- exit-latency-us = <180>;
- min-residency-us = <595>;
- local-timer-stop;
- };
- };
- };
-
- cpu_opp_table: opp-table-cpu {
- compatible = "operating-points-v2-kryo-cpu";
- opp-shared;
-
- opp-1094400000 {
- opp-hz = /bits/ 64 <1094400000>;
- required-opps = <&cpr_opp1>;
- };
- opp-1248000000 {
- opp-hz = /bits/ 64 <1248000000>;
- required-opps = <&cpr_opp2>;
- };
- opp-1401600000 {
- opp-hz = /bits/ 64 <1401600000>;
- required-opps = <&cpr_opp3>;
- };
- };
-
- cpr_opp_table: opp-table-cpr {
- compatible = "operating-points-v2-qcom-level";
-
- cpr_opp1: opp1 {
- opp-level = <1>;
- qcom,opp-fuse-level = <1>;
- };
- cpr_opp2: opp2 {
- opp-level = <2>;
- qcom,opp-fuse-level = <2>;
- };
- cpr_opp3: opp3 {
- opp-level = <3>;
- qcom,opp-fuse-level = <3>;
- };
- };
-
- firmware {
- scm: scm {
- compatible = "qcom,scm-qcs404", "qcom,scm";
- #reset-cells = <1>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- /* We expect the bootloader to fill in the size */
- reg = <0 0x80000000 0 0>;
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- rpm: remoteproc {
- compatible = "qcom,qcs404-rpm-proc", "qcom,rpm-proc";
-
- glink-edge {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-qcs404";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc";
- #clock-cells = <1>;
- clocks = <&xo_board>;
- clock-names = "xo";
- };
-
- rpmpd: power-controller {
- compatible = "qcom,qcs404-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <16>;
- };
-
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <32>;
- };
-
- rpmpd_opp_min_svs: opp3 {
- opp-level = <48>;
- };
-
- rpmpd_opp_low_svs: opp4 {
- opp-level = <64>;
- };
-
- rpmpd_opp_svs: opp5 {
- opp-level = <128>;
- };
-
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <192>;
- };
-
- rpmpd_opp_nom: opp7 {
- opp-level = <256>;
- };
-
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <320>;
- };
-
- rpmpd_opp_turbo: opp9 {
- opp-level = <384>;
- };
-
- rpmpd_opp_turbo_no_cpr: opp10 {
- opp-level = <416>;
- };
-
- rpmpd_opp_turbo_plus: opp11 {
- opp-level = <512>;
- };
- };
- };
- };
- };
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- tz_apps_mem: memory@85900000 {
- reg = <0 0x85900000 0 0x500000>;
- no-map;
- };
-
- xbl_mem: memory@85e00000 {
- reg = <0 0x85e00000 0 0x100000>;
- no-map;
- };
-
- smem_region: memory@85f00000 {
- reg = <0 0x85f00000 0 0x200000>;
- no-map;
- };
-
- tz_mem: memory@86100000 {
- reg = <0 0x86100000 0 0x300000>;
- no-map;
- };
-
- wlan_fw_mem: memory@86400000 {
- reg = <0 0x86400000 0 0x1100000>;
- no-map;
- };
-
- adsp_fw_mem: memory@87500000 {
- reg = <0 0x87500000 0 0x1a00000>;
- no-map;
- };
-
- cdsp_fw_mem: memory@88f00000 {
- reg = <0 0x88f00000 0 0x600000>;
- no-map;
- };
-
- wlan_msa_mem: memory@89500000 {
- reg = <0 0x89500000 0 0x100000>;
- no-map;
- };
-
- uefi_mem: memory@9f800000 {
- reg = <0 0x9f800000 0 0x800000>;
- no-map;
- };
- };
-
- smem {
- compatible = "qcom,smem";
-
- memory-region = <&smem_region>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
- hwlocks = <&tcsr_mutex 3>;
- };
-
- soc: soc@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
- compatible = "simple-bus";
-
- turingcc: clock-controller@800000 {
- compatible = "qcom,qcs404-turingcc";
- reg = <0x00800000 0x30000>;
- clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
-
- #clock-cells = <1>;
- #reset-cells = <1>;
-
- status = "disabled";
- };
-
- rpm_msg_ram: sram@60000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0x00060000 0x6000>;
- };
-
- usb3_phy: phy@78000 {
- compatible = "qcom,usb-ss-28nm-phy";
- reg = <0x00078000 0x400>;
- #phy-cells = <0>;
- clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
- <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "ref", "ahb", "pipe";
- resets = <&gcc GCC_USB3_PHY_BCR>,
- <&gcc GCC_USB3PHY_PHY_BCR>;
- reset-names = "com", "phy";
- status = "disabled";
- };
-
- usb2_phy_prim: phy@7a000 {
- compatible = "qcom,usb-hs-28nm-femtophy";
- reg = <0x0007a000 0x200>;
- #phy-cells = <0>;
- clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
- <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
- clock-names = "ref", "ahb", "sleep";
- resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
- <&gcc GCC_USB2A_PHY_BCR>;
- reset-names = "phy", "por";
- status = "disabled";
- };
-
- usb2_phy_sec: phy@7c000 {
- compatible = "qcom,usb-hs-28nm-femtophy";
- reg = <0x0007c000 0x200>;
- #phy-cells = <0>;
- clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
- <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
- clock-names = "ref", "ahb", "sleep";
- resets = <&gcc GCC_QUSB2_PHY_BCR>,
- <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
- reset-names = "phy", "por";
- status = "disabled";
- };
-
- qfprom: qfprom@a4000 {
- compatible = "qcom,qcs404-qfprom", "qcom,qfprom";
- reg = <0x000a4000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- cpr_efuse_speedbin: speedbin@13c {
- reg = <0x13c 0x4>;
- bits = <2 3>;
- };
-
- tsens_s0_p1: s0-p1@1f8 {
- reg = <0x1f8 0x1>;
- bits = <0 6>;
- };
-
- tsens_s0_p2: s0-p2@1f8 {
- reg = <0x1f8 0x2>;
- bits = <6 6>;
- };
-
- tsens_s1_p1: s1-p1@1f9 {
- reg = <0x1f9 0x2>;
- bits = <4 6>;
- };
-
- tsens_s1_p2: s1-p2@1fa {
- reg = <0x1fa 0x1>;
- bits = <2 6>;
- };
-
- tsens_s2_p1: s2-p1@1fb {
- reg = <0x1fb 0x1>;
- bits = <0 6>;
- };
-
- tsens_s2_p2: s2-p2@1fb {
- reg = <0x1fb 0x2>;
- bits = <6 6>;
- };
-
- tsens_s3_p1: s3-p1@1fc {
- reg = <0x1fc 0x2>;
- bits = <4 6>;
- };
-
- tsens_s3_p2: s3-p2@1fd {
- reg = <0x1fd 0x1>;
- bits = <2 6>;
- };
-
- tsens_s4_p1: s4-p1@1fe {
- reg = <0x1fe 0x1>;
- bits = <0 6>;
- };
-
- tsens_s4_p2: s4-p2@1fe {
- reg = <0x1fe 0x2>;
- bits = <6 6>;
- };
-
- tsens_s5_p1: s5-p1@200 {
- reg = <0x200 0x1>;
- bits = <0 6>;
- };
-
- tsens_s5_p2: s5-p2@200 {
- reg = <0x200 0x2>;
- bits = <6 6>;
- };
-
- tsens_s6_p1: s6-p1@201 {
- reg = <0x201 0x2>;
- bits = <4 6>;
- };
-
- tsens_s6_p2: s6-p2@202 {
- reg = <0x202 0x1>;
- bits = <2 6>;
- };
-
- tsens_s7_p1: s7-p1@203 {
- reg = <0x203 0x1>;
- bits = <0 6>;
- };
-
- tsens_s7_p2: s7-p2@203 {
- reg = <0x203 0x2>;
- bits = <6 6>;
- };
-
- tsens_s8_p1: s8-p1@204 {
- reg = <0x204 0x2>;
- bits = <4 6>;
- };
-
- tsens_s8_p2: s8-p2@205 {
- reg = <0x205 0x1>;
- bits = <2 6>;
- };
-
- tsens_s9_p1: s9-p1@206 {
- reg = <0x206 0x1>;
- bits = <0 6>;
- };
-
- tsens_s9_p2: s9-p2@206 {
- reg = <0x206 0x2>;
- bits = <6 6>;
- };
-
- tsens_mode: mode@208 {
- reg = <0x208 1>;
- bits = <0 3>;
- };
-
- tsens_base1: base1@208 {
- reg = <0x208 2>;
- bits = <3 8>;
- };
-
- tsens_base2: base2@208 {
- reg = <0x209 2>;
- bits = <3 8>;
- };
-
- cpr_efuse_quot_offset1: qoffset1@231 {
- reg = <0x231 0x4>;
- bits = <4 7>;
- };
- cpr_efuse_quot_offset2: qoffset2@232 {
- reg = <0x232 0x4>;
- bits = <3 7>;
- };
- cpr_efuse_quot_offset3: qoffset3@233 {
- reg = <0x233 0x4>;
- bits = <2 7>;
- };
- cpr_efuse_init_voltage1: ivoltage1@229 {
- reg = <0x229 0x4>;
- bits = <4 6>;
- };
- cpr_efuse_init_voltage2: ivoltage2@22a {
- reg = <0x22a 0x4>;
- bits = <2 6>;
- };
- cpr_efuse_init_voltage3: ivoltage3@22b {
- reg = <0x22b 0x4>;
- bits = <0 6>;
- };
- cpr_efuse_quot1: quot1@22b {
- reg = <0x22b 0x4>;
- bits = <6 12>;
- };
- cpr_efuse_quot2: quot2@22d {
- reg = <0x22d 0x4>;
- bits = <2 12>;
- };
- cpr_efuse_quot3: quot3@230 {
- reg = <0x230 0x4>;
- bits = <0 12>;
- };
- cpr_efuse_ring1: ring1@228 {
- reg = <0x228 0x4>;
- bits = <0 3>;
- };
- cpr_efuse_ring2: ring2@228 {
- reg = <0x228 0x4>;
- bits = <4 3>;
- };
- cpr_efuse_ring3: ring3@229 {
- reg = <0x229 0x4>;
- bits = <0 3>;
- };
- cpr_efuse_revision: revision@218 {
- reg = <0x218 0x4>;
- bits = <3 3>;
- };
- };
-
- rng: rng@e3000 {
- compatible = "qcom,prng-ee";
- reg = <0x000e3000 0x1000>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "core";
- };
-
- bimc: interconnect@400000 {
- reg = <0x00400000 0x80000>;
- compatible = "qcom,qcs404-bimc";
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
- };
-
- tsens: thermal-sensor@4a9000 {
- compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
- reg = <0x004a9000 0x1000>, /* TM */
- <0x004a8000 0x1000>; /* SROT */
- nvmem-cells = <&tsens_mode>,
- <&tsens_base1>, <&tsens_base2>,
- <&tsens_s0_p1>, <&tsens_s0_p2>,
- <&tsens_s1_p1>, <&tsens_s1_p2>,
- <&tsens_s2_p1>, <&tsens_s2_p2>,
- <&tsens_s3_p1>, <&tsens_s3_p2>,
- <&tsens_s4_p1>, <&tsens_s4_p2>,
- <&tsens_s5_p1>, <&tsens_s5_p2>,
- <&tsens_s6_p1>, <&tsens_s6_p2>,
- <&tsens_s7_p1>, <&tsens_s7_p2>,
- <&tsens_s8_p1>, <&tsens_s8_p2>,
- <&tsens_s9_p1>, <&tsens_s9_p2>;
- nvmem-cell-names = "mode",
- "base1", "base2",
- "s0_p1", "s0_p2",
- "s1_p1", "s1_p2",
- "s2_p1", "s2_p2",
- "s3_p1", "s3_p2",
- "s4_p1", "s4_p2",
- "s5_p1", "s5_p2",
- "s6_p1", "s6_p2",
- "s7_p1", "s7_p2",
- "s8_p1", "s8_p2",
- "s9_p1", "s9_p2";
- #qcom,sensors = <10>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
- #thermal-sensor-cells = <1>;
- };
-
- pcnoc: interconnect@500000 {
- reg = <0x00500000 0x15080>;
- compatible = "qcom,qcs404-pcnoc";
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
- <&rpmcc RPM_SMD_PNOC_A_CLK>;
- };
-
- snoc: interconnect@580000 {
- reg = <0x00580000 0x23080>;
- compatible = "qcom,qcs404-snoc";
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
- };
-
- remoteproc_cdsp: remoteproc@b00000 {
- compatible = "qcom,qcs404-cdsp-pas";
- reg = <0x00b00000 0x4040>;
-
- interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- /*
- * If the node was using the PIL binding, then include properties:
- * clocks = <&xo_board>,
- * <&gcc GCC_CDSP_CFG_AHB_CLK>,
- * <&gcc GCC_CDSP_TBU_CLK>,
- * <&gcc GCC_BIMC_CDSP_CLK>,
- * <&turingcc TURING_WRAPPER_AON_CLK>,
- * <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
- * <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
- * <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
- * clock-names = "xo",
- * "sway",
- * "tbu",
- * "bimc",
- * "ahb_aon",
- * "q6ss_slave",
- * "q6ss_master",
- * "q6_axim";
- * resets = <&gcc GCC_CDSP_RESTART>;
- * reset-names = "restart";
- * qcom,halt-regs = <&tcsr 0x19004>;
- */
-
- memory-region = <&cdsp_fw_mem>;
-
- qcom,smem-states = <&cdsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
-
- qcom,remote-pid = <5>;
- mboxes = <&apcs_glb 12>;
-
- label = "cdsp";
- };
- };
-
- usb3: usb@7678800 {
- compatible = "qcom,qcs404-dwc3", "qcom,dwc3";
- reg = <0x07678800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&gcc GCC_USB30_MASTER_CLK>,
- <&gcc GCC_SYS_NOC_USB3_CLK>,
- <&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>;
- clock-names = "core", "iface", "sleep", "mock_utmi";
- assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <200000000>;
- status = "disabled";
-
- usb3_dwc3: usb@7580000 {
- compatible = "snps,dwc3";
- reg = <0x07580000 0xcd00>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb2_phy_prim>, <&usb3_phy>;
- phy-names = "usb2-phy", "usb3-phy";
- snps,has-lpm-erratum;
- snps,hird-threshold = /bits/ 8 <0x10>;
- snps,usb3_lpm_capable;
- dr_mode = "otg";
- };
- };
-
- usb2: usb@79b8800 {
- compatible = "qcom,qcs404-dwc3", "qcom,dwc3";
- reg = <0x079b8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>,
- <&gcc GCC_PCNOC_USB2_CLK>,
- <&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>,
- <&gcc GCC_USB20_MOCK_UTMI_CLK>;
- clock-names = "core", "iface", "sleep", "mock_utmi";
- assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
- <&gcc GCC_USB_HS_SYSTEM_CLK>;
- assigned-clock-rates = <19200000>, <133333333>;
- status = "disabled";
-
- usb@78c0000 {
- compatible = "snps,dwc3";
- reg = <0x078c0000 0xcc00>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb2_phy_sec>;
- phy-names = "usb2-phy";
- snps,has-lpm-erratum;
- snps,hird-threshold = /bits/ 8 <0x10>;
- snps,usb3_lpm_capable;
- dr_mode = "peripheral";
- };
- };
-
- tlmm: pinctrl@1000000 {
- compatible = "qcom,qcs404-pinctrl";
- reg = <0x01000000 0x200000>,
- <0x01300000 0x200000>,
- <0x07b00000 0x200000>;
- reg-names = "south", "north", "east";
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-ranges = <&tlmm 0 0 120>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- blsp1_i2c0_default: blsp1-i2c0-default-state {
- pins = "gpio32", "gpio33";
- function = "blsp_i2c0";
- };
-
- blsp1_i2c1_default: blsp1-i2c1-default-state {
- pins = "gpio24", "gpio25";
- function = "blsp_i2c1";
- };
-
- blsp1_i2c2_default: blsp1-i2c2-default-state {
- sda-pins {
- pins = "gpio19";
- function = "blsp_i2c_sda_a2";
- };
-
- scl-pins {
- pins = "gpio20";
- function = "blsp_i2c_scl_a2";
- };
- };
-
- blsp1_i2c3_default: blsp1-i2c3-default-state {
- pins = "gpio84", "gpio85";
- function = "blsp_i2c3";
- };
-
- blsp1_i2c4_default: blsp1-i2c4-default-state {
- pins = "gpio117", "gpio118";
- function = "blsp_i2c4";
- };
-
- blsp1_uart0_default: blsp1-uart0-default-state {
- pins = "gpio30", "gpio31", "gpio32", "gpio33";
- function = "blsp_uart0";
- };
-
- blsp1_uart1_default: blsp1-uart1-default-state {
- pins = "gpio22", "gpio23";
- function = "blsp_uart1";
- };
-
- blsp1_uart2_default: blsp1-uart2-default-state {
- rx-pins {
- pins = "gpio18";
- function = "blsp_uart_rx_a2";
- };
-
- tx-pins {
- pins = "gpio17";
- function = "blsp_uart_tx_a2";
- };
- };
-
- blsp1_uart3_default: blsp1-uart3-default-state {
- cts-pins {
- pins = "gpio84";
- function = "blsp_uart3";
- };
-
- rts-tx-pins {
- pins = "gpio85", "gpio82";
- function = "blsp_uart3";
- };
-
- rx-pins {
- pins = "gpio83";
- function = "blsp_uart3";
- };
- };
-
- blsp2_i2c0_default: blsp2-i2c0-default-state {
- pins = "gpio28", "gpio29";
- function = "blsp_i2c5";
- };
-
- blsp1_spi0_default: blsp1-spi0-default-state {
- pins = "gpio30", "gpio31", "gpio32", "gpio33";
- function = "blsp_spi0";
- };
-
- blsp1_spi1_default: blsp1-spi1-default-state {
- mosi-pins {
- pins = "gpio22";
- function = "blsp_spi_mosi_a1";
- };
-
- miso-pins {
- pins = "gpio23";
- function = "blsp_spi_miso_a1";
- };
-
- cs-n-pins {
- pins = "gpio24";
- function = "blsp_spi_cs_n_a1";
- };
-
- clk-pins {
- pins = "gpio25";
- function = "blsp_spi_clk_a1";
- };
- };
-
- blsp1_spi2_default: blsp1-spi2-default-state {
- pins = "gpio17", "gpio18", "gpio19", "gpio20";
- function = "blsp_spi2";
- };
-
- blsp1_spi3_default: blsp1-spi3-default-state {
- pins = "gpio82", "gpio83", "gpio84", "gpio85";
- function = "blsp_spi3";
- };
-
- blsp1_spi4_default: blsp1-spi4-default-state {
- pins = "gpio37", "gpio38", "gpio117", "gpio118";
- function = "blsp_spi4";
- };
-
- blsp2_spi0_default: blsp2-spi0-default-state {
- pins = "gpio26", "gpio27", "gpio28", "gpio29";
- function = "blsp_spi5";
- };
-
- blsp2_uart0_default: blsp2-uart0-default-state {
- pins = "gpio26", "gpio27", "gpio28", "gpio29";
- function = "blsp_uart5";
- };
- };
-
- gcc: clock-controller@1800000 {
- compatible = "qcom,gcc-qcs404";
- reg = <0x01800000 0x80000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
-
- clocks = <&xo_board>,
- <&sleep_clk>,
- <&pcie_phy>,
- <0>,
- <0>,
- <0>;
-
- assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
- assigned-clock-rates = <19200000>;
- };
-
- tcsr_mutex: hwlock@1905000 {
- compatible = "qcom,tcsr-mutex";
- reg = <0x01905000 0x20000>;
- #hwlock-cells = <1>;
- };
-
- tcsr: syscon@1937000 {
- compatible = "qcom,qcs404-tcsr", "syscon";
- reg = <0x01937000 0x25000>;
- };
-
- sram@290000 {
- compatible = "qcom,rpm-stats";
- reg = <0x00290000 0x10000>;
- };
-
- spmi_bus: spmi@200f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0200f000 0x001000>,
- <0x02400000 0x800000>,
- <0x02c00000 0x800000>,
- <0x03800000 0x200000>,
- <0x0200a000 0x002100>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- remoteproc_wcss: remoteproc@7400000 {
- compatible = "qcom,qcs404-wcss-pas";
- reg = <0x07400000 0x4040>;
-
- interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- memory-region = <&wlan_fw_mem>;
-
- qcom,smem-states = <&wcss_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
- qcom,remote-pid = <1>;
- mboxes = <&apcs_glb 16>;
-
- label = "wcss";
- };
- };
-
- pcie_phy: phy@7786000 {
- compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy";
- reg = <0x07786000 0xb8>;
-
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
- <&gcc GCC_PCIE_0_PIPE_ARES>;
- reset-names = "phy", "pipe";
-
- clock-output-names = "pcie_0_pipe_clk";
- #clock-cells = <0>;
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- sdcc1: mmc@7804000 {
- compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5";
- reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
- reg-names = "hc", "cqhci";
-
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clocks = <&gcc GCC_SDCC1_AHB_CLK>,
- <&gcc GCC_SDCC1_APPS_CLK>,
- <&xo_board>;
- clock-names = "iface", "core", "xo";
-
- status = "disabled";
- };
-
- blsp1_dma: dma-controller@7884000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x07884000 0x25000>;
- interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- status = "okay";
- };
-
- blsp1_uart0: serial@78af000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x078af000 0x200>;
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_uart0_default>;
- status = "disabled";
- };
-
- blsp1_uart1: serial@78b0000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x078b0000 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_uart1_default>;
- status = "disabled";
- };
-
- blsp1_uart2: serial@78b1000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x078b1000 0x200>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_uart2_default>;
- status = "okay";
- };
-
- ethernet: ethernet@7a80000 {
- compatible = "qcom,qcs404-ethqos";
- reg = <0x07a80000 0x10000>,
- <0x07a96000 0x100>;
- reg-names = "stmmaceth", "rgmii";
- clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
- clocks = <&gcc GCC_ETH_AXI_CLK>,
- <&gcc GCC_ETH_SLAVE_AHB_CLK>,
- <&gcc GCC_ETH_PTP_CLK>,
- <&gcc GCC_ETH_RGMII_CLK>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq", "eth_lpi";
-
- snps,tso;
- rx-fifo-depth = <4096>;
- tx-fifo-depth = <4096>;
-
- status = "disabled";
- };
-
- wifi: wifi@a000000 {
- compatible = "qcom,wcn3990-wifi";
- reg = <0xa000000 0x800000>;
- reg-names = "membase";
- memory-region = <&wlan_msa_mem>;
- interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- blsp1_uart3: serial@78b2000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x078b2000 0x200>;
- interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_uart3_default>;
- status = "disabled";
- };
-
- blsp1_i2c0: i2c@78b5000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b5000 0x600>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_i2c0_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp1_spi0: spi@78b5000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b5000 0x600>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_spi0_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp1_i2c1: i2c@78b6000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b6000 0x600>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_i2c1_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp1_spi1: spi@78b6000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b6000 0x600>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_spi1_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp1_i2c2: i2c@78b7000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b7000 0x600>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_i2c2_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp1_spi2: spi@78b7000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b7000 0x600>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_spi2_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp1_i2c3: i2c@78b8000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b8000 0x600>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_i2c3_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp1_spi3: spi@78b8000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b8000 0x600>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_spi3_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp1_i2c4: i2c@78b9000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x078b9000 0x600>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_i2c4_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp1_spi4: spi@78b9000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x078b9000 0x600>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_spi4_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_dma: dma-controller@7ac4000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x07ac4000 0x17000>;
- interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- status = "disabled";
- };
-
- blsp2_uart0: serial@7aef000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x07aef000 0x200>;
- interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp2_uart0_default>;
- status = "disabled";
- };
-
- blsp2_i2c0: i2c@7af5000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x07af5000 0x600>;
- interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp2_i2c0_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_spi0: spi@7af5000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x07af5000 0x600>;
- interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp2_spi0_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- sram@8600000 {
- compatible = "qcom,qcs404-imem", "syscon", "simple-mfd";
- reg = <0x08600000 0x1000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- ranges = <0 0x08600000 0x1000>;
-
- pil-reloc@94c {
- compatible = "qcom,pil-reloc-info";
- reg = <0x94c 0xc8>;
- };
- };
-
- intc: interrupt-controller@b000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x0b000000 0x1000>,
- <0x0b002000 0x1000>;
- };
-
- apcs_glb: mailbox@b011000 {
- compatible = "qcom,qcs404-apcs-apps-global",
- "qcom,msm8916-apcs-kpss-global", "syscon";
- reg = <0x0b011000 0x1000>;
- #mbox-cells = <1>;
- clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
- clock-names = "pll", "aux";
- #clock-cells = <0>;
- };
-
- apcs_hfpll: clock-controller@b016000 {
- compatible = "qcom,hfpll";
- reg = <0x0b016000 0x30>;
- #clock-cells = <0>;
- clock-output-names = "apcs_hfpll";
- clocks = <&xo_board>;
- clock-names = "xo";
- };
-
- watchdog@b017000 {
- compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
- reg = <0x0b017000 0x1000>;
- clocks = <&sleep_clk>;
- };
-
- cpr: power-controller@b018000 {
- compatible = "qcom,qcs404-cpr", "qcom,cpr";
- reg = <0x0b018000 0x1000>;
- interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xo_board>;
- clock-names = "ref";
- vdd-apc-supply = <&pms405_s3>;
- #power-domain-cells = <0>;
- operating-points-v2 = <&cpr_opp_table>;
- acc-syscon = <&tcsr>;
-
- nvmem-cells = <&cpr_efuse_quot_offset1>,
- <&cpr_efuse_quot_offset2>,
- <&cpr_efuse_quot_offset3>,
- <&cpr_efuse_init_voltage1>,
- <&cpr_efuse_init_voltage2>,
- <&cpr_efuse_init_voltage3>,
- <&cpr_efuse_quot1>,
- <&cpr_efuse_quot2>,
- <&cpr_efuse_quot3>,
- <&cpr_efuse_ring1>,
- <&cpr_efuse_ring2>,
- <&cpr_efuse_ring3>,
- <&cpr_efuse_revision>;
- nvmem-cell-names = "cpr_quotient_offset1",
- "cpr_quotient_offset2",
- "cpr_quotient_offset3",
- "cpr_init_voltage1",
- "cpr_init_voltage2",
- "cpr_init_voltage3",
- "cpr_quotient1",
- "cpr_quotient2",
- "cpr_quotient3",
- "cpr_ring_osc1",
- "cpr_ring_osc2",
- "cpr_ring_osc3",
- "cpr_fuse_revision";
- };
-
- timer@b120000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0x0b120000 0x1000>;
- clock-frequency = <19200000>;
-
- frame@b121000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b121000 0x1000>,
- <0x0b122000 0x1000>;
- };
-
- frame@b123000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b123000 0x1000>;
- status = "disabled";
- };
-
- frame@b124000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b124000 0x1000>;
- status = "disabled";
- };
-
- frame@b125000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b125000 0x1000>;
- status = "disabled";
- };
-
- frame@b126000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b126000 0x1000>;
- status = "disabled";
- };
-
- frame@b127000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb127000 0x1000>;
- status = "disabled";
- };
-
- frame@b128000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0b128000 0x1000>;
- status = "disabled";
- };
- };
-
- remoteproc_adsp: remoteproc@c700000 {
- compatible = "qcom,qcs404-adsp-pas";
- reg = <0x0c700000 0x4040>;
-
- interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- memory-region = <&adsp_fw_mem>;
-
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
-
- qcom,remote-pid = <2>;
- mboxes = <&apcs_glb 8>;
-
- label = "adsp";
- };
- };
-
- pcie: pci@10000000 {
- compatible = "qcom,pcie-qcs404";
- reg = <0x10000000 0xf1d>,
- <0x10000f20 0xa8>,
- <0x07780000 0x2000>,
- <0x10001000 0x2000>;
- reg-names = "dbi", "elbi", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <0>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */
- <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */
-
- interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
- clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_0_AUX_CLK>,
- <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
- clock-names = "iface", "aux", "master_bus", "slave_bus";
-
- resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
- <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
- <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
- <&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
- <&gcc GCC_PCIE_0_BCR>,
- <&gcc GCC_PCIE_0_AHB_ARES>;
- reset-names = "axi_m",
- "axi_s",
- "axi_m_sticky",
- "pipe_sticky",
- "pwr",
- "ahb";
-
- phys = <&pcie_phy>;
- phy-names = "pciephy";
-
- status = "disabled";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 2 0xff08>,
- <GIC_PPI 3 0xff08>,
- <GIC_PPI 4 0xff08>,
- <GIC_PPI 1 0xff08>;
- };
-
- smp2p-adsp {
- compatible = "qcom,smp2p";
- qcom,smem = <443>, <429>;
- interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
- mboxes = <&apcs_glb 10>;
- qcom,local-pid = <0>;
- qcom,remote-pid = <2>;
-
- adsp_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- adsp_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- smp2p-cdsp {
- compatible = "qcom,smp2p";
- qcom,smem = <94>, <432>;
- interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
- mboxes = <&apcs_glb 14>;
- qcom,local-pid = <0>;
- qcom,remote-pid = <5>;
-
- cdsp_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- cdsp_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- smp2p-wcss {
- compatible = "qcom,smp2p";
- qcom,smem = <435>, <428>;
- interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
- mboxes = <&apcs_glb 18>;
- qcom,local-pid = <0>;
- qcom,remote-pid = <1>;
-
- wcss_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- wcss_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- thermal-zones {
- aoss-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 0>;
-
- trips {
- aoss_alert0: trip-point0 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- q6-hvx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 1>;
-
- trips {
- q6_hvx_alert0: trip-point0 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- lpass-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 2>;
-
- trips {
- lpass_alert0: trip-point0 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- wlan-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 3>;
-
- trips {
- wlan_alert0: trip-point0 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- cluster-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 4>;
-
- trips {
- cluster_alert0: trip-point0 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "hot";
- };
- cluster_alert1: trip-point1 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cluster_crit: cluster-crit {
- temperature = <120000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- cooling-maps {
- map0 {
- trip = <&cluster_alert1>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-
- cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 5>;
-
- trips {
- cpu0_alert0: trip-point0 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "hot";
- };
- cpu0_alert1: trip-point1 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu0_crit: cpu-crit {
- temperature = <120000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- cooling-maps {
- map0 {
- trip = <&cpu0_alert1>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-
- cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 6>;
-
- trips {
- cpu1_alert0: trip-point0 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "hot";
- };
- cpu1_alert1: trip-point1 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu1_crit: cpu-crit {
- temperature = <120000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- cooling-maps {
- map0 {
- trip = <&cpu1_alert1>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-
- cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 7>;
-
- trips {
- cpu2_alert0: trip-point0 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "hot";
- };
- cpu2_alert1: trip-point1 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu2_crit: cpu-crit {
- temperature = <120000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- cooling-maps {
- map0 {
- trip = <&cpu2_alert1>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-
- cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 8>;
-
- trips {
- cpu3_alert0: trip-point0 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "hot";
- };
- cpu3_alert1: trip-point1 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu3_crit: cpu-crit {
- temperature = <120000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- cooling-maps {
- map0 {
- trip = <&cpu3_alert1>;
- cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-
- gpu-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 9>;
-
- trips {
- gpu_alert0: trip-point0 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
- };
-};
deleted file mode 100644
@@ -1,1190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019, Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include <dt-bindings/sound/qcom,q6afe.h>
-#include <dt-bindings/sound/qcom,q6asm.h>
-#include "sdm845.dtsi"
-#include "sdm845-wcd9340.dtsi"
-#include "pm8998.dtsi"
-#include "pmi8998.dtsi"
-
-/ {
- model = "Thundercomm Dragonboard 845c";
- compatible = "thundercomm,db845c", "qcom,sdm845";
- qcom,msm-id = <341 0x20001>;
- qcom,board-id = <8 0>;
-
- aliases {
- serial0 = &uart9;
- serial1 = &uart6;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- /* Fixed crystal oscillator dedicated to MCP2517FD */
- clk40M: can-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <40000000>;
- };
-
- dc12v: dc12v-regulator {
- compatible = "regulator-fixed";
- regulator-name = "DC12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&vol_up_pin_a>;
-
- key-vol-up {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- label = "green:user4";
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "panic-indicator";
- default-state = "off";
- };
-
- led-1 {
- label = "yellow:wlan";
- function = LED_FUNCTION_WLAN;
- color = <LED_COLOR_ID_YELLOW>;
- gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tx";
- default-state = "off";
- };
-
- led-2 {
- label = "blue:bt";
- function = LED_FUNCTION_BLUETOOTH;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "bluetooth-power";
- default-state = "off";
- };
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con: endpoint {
- remote-endpoint = <<9611_out>;
- };
- };
- };
-
- reserved-memory {
- /* Cont splash region set up by the bootloader */
- cont_splash_mem: framebuffer@9d400000 {
- reg = <0x0 0x9d400000 0x0 0x2400000>;
- no-map;
- };
- };
-
- lt9611_1v8: lt9611-vdd18-regulator {
- compatible = "regulator-fixed";
- regulator-name = "LT9611_1V8";
-
- vin-supply = <&vdc_5v>;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- lt9611_3v3: lt9611-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "LT9611_3V3";
-
- vin-supply = <&vdc_3v3>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- /*
- * TODO: make it possible to drive same GPIO from two clients
- * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
- * enable-active-high;
- */
- };
-
- pcie0_1p05v: pcie-0-1p05v-regulator {
- compatible = "regulator-fixed";
- regulator-name = "PCIE0_1.05V";
-
- vin-supply = <&vbat>;
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
-
- /*
- * TODO: make it possible to drive same GPIO from two clients
- * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
- * enable-active-high;
- */
- };
-
- cam0_dvdd_1v2: cam0-dvdd-1v2-regulator {
- compatible = "regulator-fixed";
- regulator-name = "CAM0_DVDD_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- enable-active-high;
- gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
- vin-supply = <&vbat>;
- };
-
- cam0_avdd_2v8: cam0-avdd-2v8-regulator {
- compatible = "regulator-fixed";
- regulator-name = "CAM0_AVDD_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- enable-active-high;
- gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cam0_avdd_2v8_en_default>;
- vin-supply = <&vbat>;
- };
-
- /* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */
- cam3_avdd_2v8: cam3-avdd-2v8-regulator {
- compatible = "regulator-fixed";
- regulator-name = "CAM3_AVDD_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- vin-supply = <&vbat>;
- };
-
- pcie0_3p3v_dual: vldo-3v3-regulator {
- compatible = "regulator-fixed";
- regulator-name = "VLDO_3V3";
-
- vin-supply = <&vbat>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pcie0_pwren_state>;
- };
-
- v5p0_hdmiout: v5p0-hdmiout-regulator {
- compatible = "regulator-fixed";
- regulator-name = "V5P0_HDMIOUT";
-
- vin-supply = <&vdc_5v>;
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <500000>;
-
- /*
- * TODO: make it possible to drive same GPIO from two clients
- * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
- * enable-active-high;
- */
- };
-
- vbat: vbat-regulator {
- compatible = "regulator-fixed";
- regulator-name = "VBAT";
-
- vin-supply = <&dc12v>;
- regulator-min-microvolt = <4200000>;
- regulator-max-microvolt = <4200000>;
- regulator-always-on;
- };
-
- vbat_som: vbat-som-regulator {
- compatible = "regulator-fixed";
- regulator-name = "VBAT_SOM";
-
- vin-supply = <&dc12v>;
- regulator-min-microvolt = <4200000>;
- regulator-max-microvolt = <4200000>;
- regulator-always-on;
- };
-
- vdc_3v3: vdc-3v3-regulator {
- compatible = "regulator-fixed";
- regulator-name = "VDC_3V3";
- vin-supply = <&dc12v>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdc_5v: vdc-5v-regulator {
- compatible = "regulator-fixed";
- regulator-name = "VDC_5V";
-
- vin-supply = <&dc12v>;
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <500000>;
- regulator-always-on;
- };
-
- vreg_s4a_1p8: vreg-s4a-1p8 {
- compatible = "regulator-fixed";
- regulator-name = "vreg_s4a_1p8";
-
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vph_pwr: vph-pwr-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vph_pwr";
-
- vin-supply = <&vbat_som>;
- };
-};
-
-&adsp_pas {
- status = "okay";
-
- firmware-name = "qcom/sdm845/adsp.mbn";
-};
-
-&apps_rsc {
- regulators-0 {
- compatible = "qcom,pm8998-rpmh-regulators";
- qcom,pmic-id = "a";
- vdd-s1-supply = <&vph_pwr>;
- vdd-s2-supply = <&vph_pwr>;
- vdd-s3-supply = <&vph_pwr>;
- vdd-s4-supply = <&vph_pwr>;
- vdd-s5-supply = <&vph_pwr>;
- vdd-s6-supply = <&vph_pwr>;
- vdd-s7-supply = <&vph_pwr>;
- vdd-s8-supply = <&vph_pwr>;
- vdd-s9-supply = <&vph_pwr>;
- vdd-s10-supply = <&vph_pwr>;
- vdd-s11-supply = <&vph_pwr>;
- vdd-s12-supply = <&vph_pwr>;
- vdd-s13-supply = <&vph_pwr>;
- vdd-l1-l27-supply = <&vreg_s7a_1p025>;
- vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
- vdd-l3-l11-supply = <&vreg_s7a_1p025>;
- vdd-l4-l5-supply = <&vreg_s7a_1p025>;
- vdd-l6-supply = <&vph_pwr>;
- vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
- vdd-l9-supply = <&vreg_bob>;
- vdd-l10-l23-l25-supply = <&vreg_bob>;
- vdd-l13-l19-l21-supply = <&vreg_bob>;
- vdd-l16-l28-supply = <&vreg_bob>;
- vdd-l18-l22-supply = <&vreg_bob>;
- vdd-l20-l24-supply = <&vreg_bob>;
- vdd-l26-supply = <&vreg_s3a_1p35>;
- vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
-
- vreg_s3a_1p35: smps3 {
- regulator-min-microvolt = <1352000>;
- regulator-max-microvolt = <1352000>;
- };
-
- vreg_s5a_2p04: smps5 {
- regulator-min-microvolt = <1904000>;
- regulator-max-microvolt = <2040000>;
- };
-
- vreg_s7a_1p025: smps7 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1028000>;
- };
-
- vreg_l1a_0p875: ldo1 {
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l5a_0p8: ldo5 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l12a_1p8: ldo12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l7a_1p8: ldo7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l13a_2p95: ldo13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l17a_1p3: ldo17 {
- regulator-min-microvolt = <1304000>;
- regulator-max-microvolt = <1304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l20a_2p95: ldo20 {
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2968000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l21a_2p95: ldo21 {
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2968000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l24a_3p075: ldo24 {
- regulator-min-microvolt = <3088000>;
- regulator-max-microvolt = <3088000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l25a_3p3: ldo25 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3312000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l26a_1p2: ldo26 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_lvs1a_1p8: lvs1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vreg_lvs2a_1p8: lvs2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
- };
-
- regulators-1 {
- compatible = "qcom,pmi8998-rpmh-regulators";
- qcom,pmic-id = "b";
-
- vdd-bob-supply = <&vph_pwr>;
-
- vreg_bob: bob {
- regulator-min-microvolt = <3312000>;
- regulator-max-microvolt = <3600000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
- regulator-allow-bypass;
- };
- };
-};
-
-&camss {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l1a_0p875>;
- vdda-pll-supply = <&vreg_l26a_1p2>;
-};
-
-&cdsp_pas {
- status = "okay";
- firmware-name = "qcom/sdm845/cdsp.mbn";
-};
-
-&gcc {
- protected-clocks = <GCC_QSPI_CORE_CLK>,
- <GCC_QSPI_CORE_CLK_SRC>,
- <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
- <GCC_LPASS_Q6_AXI_CLK>,
- <GCC_LPASS_SWAY_CLK>;
-};
-
-&gmu {
- status = "okay";
-};
-
-&gpi_dma0 {
- status = "okay";
-};
-
-&gpi_dma1 {
- status = "okay";
-};
-
-&gpu {
- status = "okay";
- zap-shader {
- memory-region = <&gpu_mem>;
- firmware-name = "qcom/sdm845/a630_zap.mbn";
- };
-};
-
-&i2c10 {
- status = "okay";
- clock-frequency = <400000>;
-
- lt9611_codec: hdmi-bridge@3b {
- compatible = "lontium,lt9611";
- reg = <0x3b>;
- #sound-dai-cells = <1>;
-
- interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
-
- reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
-
- vdd-supply = <<9611_1v8>;
- vcc-supply = <<9611_3v3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <<9611_irq_pin>, <&dsi_sw_sel>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- lt9611_a: endpoint {
- remote-endpoint = <&mdss_dsi0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- lt9611_b: endpoint {
- remote-endpoint = <&mdss_dsi1_out>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- lt9611_out: endpoint {
- remote-endpoint = <&hdmi_con>;
- };
- };
- };
- };
-};
-
-&i2c11 {
- /* On Low speed expansion */
- clock-frequency = <100000>;
- status = "okay";
-};
-
-&i2c14 {
- /* On Low speed expansion */
- clock-frequency = <100000>;
- status = "okay";
-};
-
-&mdss {
- memory-region = <&cont_splash_mem>;
- status = "okay";
-};
-
-&mdss_dsi0 {
- status = "okay";
- vdda-supply = <&vreg_l26a_1p2>;
-
- qcom,dual-dsi-mode;
- qcom,master-dsi;
-
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <<9611_a>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
-};
-
-&mdss_dsi0_phy {
- status = "okay";
- vdds-supply = <&vreg_l1a_0p875>;
-};
-
-&mdss_dsi1 {
- vdda-supply = <&vreg_l26a_1p2>;
-
- qcom,dual-dsi-mode;
-
- /* DSI1 is slave, so use DSI0 clocks */
- assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
-
- status = "okay";
-
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <<9611_b>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
-};
-
-&mdss_dsi1_phy {
- vdds-supply = <&vreg_l1a_0p875>;
- status = "okay";
-};
-
-&mss_pil {
- status = "okay";
- firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
-};
-
-&pcie0 {
- status = "okay";
- perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
- enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
-
- vddpe-3v3-supply = <&pcie0_3p3v_dual>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pcie0_default_state>;
-};
-
-&pcie0_phy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l1a_0p875>;
- vdda-pll-supply = <&vreg_l26a_1p2>;
-};
-
-&pcie1 {
- status = "okay";
- perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pcie1_default_state>;
-};
-
-&pcie1_phy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l1a_0p875>;
- vdda-pll-supply = <&vreg_l26a_1p2>;
-};
-
-&pm8998_gpios {
- gpio-line-names =
- "NC",
- "NC",
- "WLAN_SW_CTRL",
- "NC",
- "PM_GPIO5_BLUE_BT_LED",
- "VOL_UP_N",
- "NC",
- "ADC_IN1",
- "PM_GPIO9_YEL_WIFI_LED",
- "CAM0_AVDD_EN",
- "NC",
- "CAM0_DVDD_EN",
- "PM_GPIO13_GREEN_U4_LED",
- "DIV_CLK2",
- "NC",
- "NC",
- "NC",
- "SMB_STAT",
- "NC",
- "NC",
- "ADC_IN2",
- "OPTION1",
- "WCSS_PWR_REQ",
- "PM845_GPIO24",
- "OPTION2",
- "PM845_SLB";
-
- cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
- pins = "gpio12";
- function = "normal";
-
- bias-pull-up;
- drive-push-pull;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
- };
-
- cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
- pins = "gpio10";
- function = "normal";
-
- bias-pull-up;
- drive-push-pull;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
- };
-
- vol_up_pin_a: vol-up-active-state {
- pins = "gpio6";
- function = "normal";
- input-enable;
- bias-pull-up;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- };
-};
-
-&pm8998_resin {
- linux,code = <KEY_VOLUMEDOWN>;
- status = "okay";
-};
-
-&pmi8998_lpg {
- status = "okay";
-
- qcom,power-source = <1>;
-
- led@3 {
- reg = <3>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_HEARTBEAT;
- function-enumerator = <3>;
-
- linux,default-trigger = "heartbeat";
- default-state = "on";
- };
-
- led@4 {
- reg = <4>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <2>;
- };
-
- led@5 {
- reg = <5>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <1>;
- };
-};
-
-/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
-&q6afedai {
- dai@22 {
- reg = <QUATERNARY_MI2S_RX>;
- qcom,sd-lines = <0 1 2 3>;
- };
-};
-
-&q6asmdai {
- dai@0 {
- reg = <0>;
- };
-
- dai@1 {
- reg = <1>;
- };
-
- dai@2 {
- reg = <2>;
- };
-
- dai@3 {
- reg = <3>;
- direction = <2>;
- is-compress-dai;
- };
-};
-
-&qupv3_id_0 {
- status = "okay";
-};
-
-&qupv3_id_1 {
- status = "okay";
-};
-
-&sdhc_2 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
-
- vmmc-supply = <&vreg_l21a_2p95>;
- vqmmc-supply = <&vreg_l13a_2p95>;
-
- bus-width = <4>;
- cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
-};
-
-&sound {
- compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
- pinctrl-0 = <&quat_mi2s_active
- &quat_mi2s_sd0_active
- &quat_mi2s_sd1_active
- &quat_mi2s_sd2_active
- &quat_mi2s_sd3_active>;
- pinctrl-names = "default";
- model = "DB845c";
- audio-routing =
- "RX_BIAS", "MCLK",
- "AMIC1", "MIC BIAS1",
- "AMIC2", "MIC BIAS2",
- "DMIC0", "MIC BIAS1",
- "DMIC1", "MIC BIAS1",
- "DMIC2", "MIC BIAS3",
- "DMIC3", "MIC BIAS3",
- "SpkrLeft IN", "SPK1 OUT",
- "SpkrRight IN", "SPK2 OUT",
- "MM_DL1", "MultiMedia1 Playback",
- "MM_DL2", "MultiMedia2 Playback",
- "MM_DL4", "MultiMedia4 Playback",
- "MultiMedia3 Capture", "MM_UL3";
-
- mm1-dai-link {
- link-name = "MultiMedia1";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
- };
- };
-
- mm2-dai-link {
- link-name = "MultiMedia2";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
- };
- };
-
- mm3-dai-link {
- link-name = "MultiMedia3";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
- };
- };
-
- mm4-dai-link {
- link-name = "MultiMedia4";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
- };
- };
-
- hdmi-dai-link {
- link-name = "HDMI Playback";
- cpu {
- sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <<9611_codec 0>;
- };
- };
-
- slim-dai-link {
- link-name = "SLIM Playback";
- cpu {
- sound-dai = <&q6afedai SLIMBUS_0_RX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
- };
- };
-
- slimcap-dai-link {
- link-name = "SLIM Capture";
- cpu {
- sound-dai = <&q6afedai SLIMBUS_0_TX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&wcd9340 1>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi0_default>;
- cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
-
- can@0 {
- compatible = "microchip,mcp2517fd";
- reg = <0>;
- clocks = <&clk40M>;
- interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
- spi-max-frequency = <10000000>;
- vdd-supply = <&vdc_5v>;
- xceiver-supply = <&vdc_5v>;
- };
-};
-
-&spi2 {
- /* On Low speed expansion */
- status = "okay";
-};
-
-&tlmm {
- cam0_default: cam0-default-state {
- rst-pins {
- pins = "gpio9";
- function = "gpio";
-
- drive-strength = <16>;
- bias-disable;
- };
-
- mclk0-pins {
- pins = "gpio13";
- function = "cam_mclk";
-
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- cam3_default: cam3-default-state {
- rst-pins {
- function = "gpio";
- pins = "gpio21";
-
- drive-strength = <16>;
- bias-disable;
- };
-
- mclk3-pins {
- function = "cam_mclk";
- pins = "gpio16";
-
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- dsi_sw_sel: dsi-sw-sel-state {
- pins = "gpio120";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
-
- lt9611_irq_pin: lt9611-irq-state {
- pins = "gpio84";
- function = "gpio";
- bias-disable;
- };
-
- pcie0_default_state: pcie0-default-state {
- clkreq-pins {
- pins = "gpio36";
- function = "pci_e0";
- bias-pull-up;
- };
-
- reset-n-pins {
- pins = "gpio35";
- function = "gpio";
-
- drive-strength = <2>;
- output-low;
- bias-pull-down;
- };
-
- wake-n-pins {
- pins = "gpio37";
- function = "gpio";
-
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie0_pwren_state: pcie0-pwren-state {
- pins = "gpio90";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- pcie1_default_state: pcie1-default-state {
- perst-n-pins {
- pins = "gpio102";
- function = "gpio";
-
- drive-strength = <16>;
- bias-disable;
- };
-
- clkreq-pins {
- pins = "gpio103";
- function = "pci_e1";
- bias-pull-up;
- };
-
- wake-n-pins {
- pins = "gpio11";
- function = "gpio";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- reset-n-pins {
- pins = "gpio75";
- function = "gpio";
-
- drive-strength = <16>;
- bias-pull-up;
- output-high;
- };
- };
-
- sdc2_default_state: sdc2-default-state {
- clk-pins {
- pins = "sdc2_clk";
- bias-disable;
-
- /*
- * It seems that mmc_test reports errors if drive
- * strength is not 16 on clk, cmd, and data pins.
- */
- drive-strength = <16>;
- };
-
- cmd-pins {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- data-pins {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <10>;
- };
- };
-
- sdc2_card_det_n: sd-card-det-n-state {
- pins = "gpio126";
- function = "gpio";
- bias-pull-up;
- };
-};
-
-&uart3 {
- label = "LS-UART0";
- pinctrl-0 = <&qup_uart3_4pin>;
-
- status = "disabled";
-};
-
-&uart6 {
- status = "okay";
-
- pinctrl-0 = <&qup_uart6_4pin>;
-
- bluetooth {
- compatible = "qcom,wcn3990-bt";
-
- vddio-supply = <&vreg_s4a_1p8>;
- vddxo-supply = <&vreg_l7a_1p8>;
- vddrf-supply = <&vreg_l17a_1p3>;
- vddch0-supply = <&vreg_l25a_3p3>;
- max-speed = <3200000>;
- };
-};
-
-&uart9 {
- label = "LS-UART1";
- status = "okay";
-};
-
-&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
- dr_mode = "peripheral";
-};
-
-&usb_1_hsphy {
- status = "okay";
-
- vdd-supply = <&vreg_l1a_0p875>;
- vdda-pll-supply = <&vreg_l12a_1p8>;
- vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-
- qcom,imp-res-offset-value = <8>;
- qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
- qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
- qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
-
-&usb_1_qmpphy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l26a_1p2>;
- vdda-pll-supply = <&vreg_l1a_0p875>;
-};
-
-&usb_2 {
- status = "okay";
-};
-
-&usb_2_dwc3 {
- dr_mode = "host";
-};
-
-&usb_2_hsphy {
- status = "okay";
-
- vdd-supply = <&vreg_l1a_0p875>;
- vdda-pll-supply = <&vreg_l12a_1p8>;
- vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-
- qcom,imp-res-offset-value = <8>;
- qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
-};
-
-&usb_2_qmpphy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l26a_1p2>;
- vdda-pll-supply = <&vreg_l1a_0p875>;
-};
-
-&ufs_mem_hc {
- status = "okay";
-
- reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-
- vcc-supply = <&vreg_l20a_2p95>;
- vcc-max-microamp = <800000>;
-};
-
-&ufs_mem_phy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l1a_0p875>;
- vdda-pll-supply = <&vreg_l26a_1p2>;
-};
-
-&venus {
- status = "okay";
-};
-
-&wcd9340 {
- reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
- vdd-buck-supply = <&vreg_s4a_1p8>;
- vdd-buck-sido-supply = <&vreg_s4a_1p8>;
- vdd-tx-supply = <&vreg_s4a_1p8>;
- vdd-rx-supply = <&vreg_s4a_1p8>;
- vdd-io-supply = <&vreg_s4a_1p8>;
-
- swm: swm@c85 {
- left_spkr: speaker@0,1 {
- compatible = "sdw10217201000";
- reg = <0 1>;
- powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
- #thermal-sensor-cells = <0>;
- sound-name-prefix = "SpkrLeft";
- #sound-dai-cells = <0>;
- };
-
- right_spkr: speaker@0,2 {
- compatible = "sdw10217201000";
- powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
- reg = <0 2>;
- #thermal-sensor-cells = <0>;
- sound-name-prefix = "SpkrRight";
- #sound-dai-cells = <0>;
- };
- };
-};
-
-&wifi {
- status = "okay";
-
- vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
- vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
- vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
- vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
-
- qcom,snoc-host-cap-8bit-quirk;
- qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
-};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-&qup_spi2_default {
- drive-strength = <16>;
-};
-
-&qup_i2c10_default {
- drive-strength = <2>;
- bias-disable;
-};
-
-&qup_uart9_rx {
- drive-strength = <2>;
- bias-pull-up;
-};
-
-&qup_uart9_tx {
- drive-strength = <2>;
- bias-disable;
-};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-&qup_spi0_default {
- drive-strength = <6>;
- bias-disable;
-};
deleted file mode 100644
@@ -1,460 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source
- *
- * Copyright (c) 2020, The Linux Foundation. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sdm845.dtsi"
-
-/ {
- chassis-type = "handset";
- model = "Samsung Galaxy S9 SM-G9600";
- compatible = "samsung,starqltechn", "qcom,sdm845";
-
- chosen {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- framebuffer: framebuffer@9d400000 {
- compatible = "simple-framebuffer";
- reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000
- width = <1440>;
- height = <2960>;
- stride = <(1440 * 4)>;
- format = "a8r8g8b8";
- };
- };
-
- vph_pwr: vph-pwr-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vph_pwr";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- };
-
- /*
- * Apparently RPMh does not provide support for PM8998 S4 because it
- * is always-on; model it as a fixed regulator.
- */
- vreg_s4a_1p8: pm8998-smps4 {
- compatible = "regulator-fixed";
- regulator-name = "vreg_s4a_1p8";
-
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
-
- vin-supply = <&vph_pwr>;
- };
-
- reserved-memory {
- memory@9d400000 {
- reg = <0x0 0x9d400000 0x0 0x02400000>;
- no-map;
- };
-
- memory@a1300000 {
- compatible = "ramoops";
- reg = <0x0 0xa1300000 0x0 0x100000>;
- record-size = <0x40000>;
- console-size = <0x40000>;
- ftrace-size = <0x40000>;
- pmsg-size = <0x40000>;
- };
- };
-};
-
-
-&apps_rsc {
- regulators-0 {
- compatible = "qcom,pm8998-rpmh-regulators";
- qcom,pmic-id = "a";
-
- vdd-s1-supply = <&vph_pwr>;
- vdd-s2-supply = <&vph_pwr>;
- vdd-s3-supply = <&vph_pwr>;
- vdd-s4-supply = <&vph_pwr>;
- vdd-s5-supply = <&vph_pwr>;
- vdd-s6-supply = <&vph_pwr>;
- vdd-s7-supply = <&vph_pwr>;
- vdd-s8-supply = <&vph_pwr>;
- vdd-s9-supply = <&vph_pwr>;
- vdd-s10-supply = <&vph_pwr>;
- vdd-s11-supply = <&vph_pwr>;
- vdd-s12-supply = <&vph_pwr>;
- vdd-s13-supply = <&vph_pwr>;
- vdd-l1-l27-supply = <&vreg_s7a_1p025>;
- vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
- vdd-l3-l11-supply = <&vreg_s7a_1p025>;
- vdd-l4-l5-supply = <&vreg_s7a_1p025>;
- vdd-l6-supply = <&vph_pwr>;
- vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
- vdd-l26-supply = <&vreg_s3a_1p35>;
- vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
-
- vreg_s2a_1p125: smps2 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
-
- vreg_s3a_1p35: smps3 {
- regulator-min-microvolt = <1352000>;
- regulator-max-microvolt = <1352000>;
- };
-
- vreg_s5a_2p04: smps5 {
- regulator-min-microvolt = <1904000>;
- regulator-max-microvolt = <2040000>;
- };
-
- vreg_s7a_1p025: smps7 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1028000>;
- };
-
- vdd_qusb_hs0:
- vdda_hp_pcie_core:
- vdda_mipi_csi0_0p9:
- vdda_mipi_csi1_0p9:
- vdda_mipi_csi2_0p9:
- vdda_mipi_dsi0_pll:
- vdda_mipi_dsi1_pll:
- vdda_qlink_lv:
- vdda_qlink_lv_ck:
- vdda_qrefs_0p875:
- vdda_pcie_core:
- vdda_pll_cc_ebi01:
- vdda_pll_cc_ebi23:
- vdda_sp_sensor:
- vdda_ufs1_core:
- vdda_ufs2_core:
- vdda_usb1_ss_core:
- vdda_usb2_ss_core:
- vreg_l1a_0p875: ldo1 {
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vddpx_10:
- vreg_l2a_1p2: ldo2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-always-on;
- };
-
- vreg_l3a_1p0: ldo3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vdd_wcss_cx:
- vdd_wcss_mx:
- vdda_wcss_pll:
- vreg_l5a_0p8: ldo5 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vddpx_13:
- vreg_l6a_1p8: ldo6 {
- regulator-min-microvolt = <1856000>;
- regulator-max-microvolt = <1856000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l7a_1p8: ldo7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l8a_1p2: ldo8 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1248000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l9a_1p8: ldo9 {
- regulator-min-microvolt = <1704000>;
- regulator-max-microvolt = <2928000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l10a_1p8: ldo10 {
- regulator-min-microvolt = <1704000>;
- regulator-max-microvolt = <2928000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l11a_1p0: ldo11 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1048000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vdd_qfprom:
- vdd_qfprom_sp:
- vdda_apc1_cs_1p8:
- vdda_gfx_cs_1p8:
- vdda_qrefs_1p8:
- vdda_qusb_hs0_1p8:
- vddpx_11:
- vreg_l12a_1p8: ldo12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vddpx_2:
- vreg_l13a_2p95: ldo13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l14a_1p88: ldo14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l15a_1p8: ldo15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l16a_2p7: ldo16 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2704000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l17a_1p3: ldo17 {
- regulator-min-microvolt = <1304000>;
- regulator-max-microvolt = <1304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l18a_2p7: ldo18 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l19a_3p0: ldo19 {
- regulator-min-microvolt = <2856000>;
- regulator-max-microvolt = <3104000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l20a_2p95: ldo20 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l21a_2p95: ldo21 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l22a_2p85: ldo22 {
- regulator-min-microvolt = <2864000>;
- regulator-max-microvolt = <3312000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l23a_3p3: ldo23 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3312000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vdda_qusb_hs0_3p1:
- vreg_l24a_3p075: ldo24 {
- regulator-min-microvolt = <3088000>;
- regulator-max-microvolt = <3088000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l25a_3p3: ldo25 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3312000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vdda_hp_pcie_1p2:
- vdda_hv_ebi0:
- vdda_hv_ebi1:
- vdda_hv_ebi2:
- vdda_hv_ebi3:
- vdda_mipi_csi_1p25:
- vdda_mipi_dsi0_1p2:
- vdda_mipi_dsi1_1p2:
- vdda_pcie_1p2:
- vdda_ufs1_1p2:
- vdda_ufs2_1p2:
- vdda_usb1_ss_1p2:
- vdda_usb2_ss_1p2:
- vreg_l26a_1p2: ldo26 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l28a_3p0: ldo28 {
- regulator-min-microvolt = <2856000>;
- regulator-max-microvolt = <3008000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_lvs1a_1p8: lvs1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vreg_lvs2a_1p8: lvs2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- };
-
- regulators-1 {
- compatible = "qcom,pm8005-rpmh-regulators";
- qcom,pmic-id = "c";
-
- vdd-s1-supply = <&vph_pwr>;
- vdd-s2-supply = <&vph_pwr>;
- vdd-s3-supply = <&vph_pwr>;
- vdd-s4-supply = <&vph_pwr>;
-
- vreg_s3c_0p6: smps3 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <600000>;
- };
- };
-};
-
-&gcc {
- protected-clocks = <GCC_QSPI_CORE_CLK>,
- <GCC_QSPI_CORE_CLK_SRC>,
- <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
- <GCC_LPASS_Q6_AXI_CLK>,
- <GCC_LPASS_SWAY_CLK>;
-};
-
-&i2c10 {
- clock-frequency = <400000>;
- status = "okay";
-};
-
-&qupv3_id_1 {
- status = "okay";
-};
-
-&uart9 {
- status = "okay";
-};
-
-&ufs_mem_hc {
- reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
- vcc-supply = <&vreg_l20a_2p95>;
- vcc-max-microamp = <600000>;
- status = "okay";
-};
-
-&ufs_mem_phy {
- vdda-phy-supply = <&vdda_ufs1_core>;
- vdda-pll-supply = <&vdda_ufs1_1p2>;
- status = "okay";
-};
-
-&sdhc_2 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
- cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vreg_l21a_2p95>;
- vqmmc-supply = <&vddpx_2>;
- status = "okay";
-};
-
-&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
- /* Until we have Type C hooked up we'll force this as peripheral. */
- dr_mode = "peripheral";
-};
-
-&usb_1_hsphy {
- vdd-supply = <&vdda_usb1_ss_core>;
- vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
- vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
- qcom,imp-res-offset-value = <8>;
- qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
- qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
- qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
- status = "okay";
-};
-
-&usb_1_qmpphy {
- vdda-phy-supply = <&vdda_usb1_ss_1p2>;
- vdda-pll-supply = <&vdda_usb1_ss_core>;
- status = "okay";
-};
-
-&wifi {
- vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
- vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
- vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
- vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
- status = "okay";
-};
-
-&tlmm {
- gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
-
- sdc2_clk_state: sdc2-clk-state {
- pins = "sdc2_clk";
- bias-disable;
-
- /*
- * It seems that mmc_test reports errors if drive
- * strength is not 16 on clk, cmd, and data pins.
- */
- drive-strength = <16>;
- };
-
- sdc2_cmd_state: sdc2-cmd-state {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <16>;
- };
-
- sdc2_data_state: sdc2-data-state {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <16>;
- };
-
- sd_card_det_n_state: sd-card-det-n-state {
- pins = "gpio126";
- function = "gpio";
- bias-pull-up;
- };
-};
deleted file mode 100644
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDM845 SoC device tree source
- *
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-&slim {
- status = "okay";
-
- slim@1 {
- reg = <1>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- wcd9340_ifd: ifd@0,0 {
- compatible = "slim217,250";
- reg = <0 0>;
- };
-
- wcd9340: codec@1,0 {
- compatible = "slim217,250";
- reg = <1 0>;
- slim-ifc-dev = <&wcd9340_ifd>;
-
- #sound-dai-cells = <1>;
-
- interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- clock-names = "extclk";
- clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
-
- #clock-cells = <0>;
- clock-frequency = <9600000>;
- clock-output-names = "mclk";
-
- pinctrl-0 = <&wcd_intr_default>;
- pinctrl-names = "default";
-
- qcom,micbias1-microvolt = <1800000>;
- qcom,micbias2-microvolt = <1800000>;
- qcom,micbias3-microvolt = <1800000>;
- qcom,micbias4-microvolt = <1800000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- wcdgpio: gpio-controller@42 {
- compatible = "qcom,wcd9340-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x42 0x2>;
- };
-
- swm: swm@c85 {
- compatible = "qcom,soundwire-v1.3.0";
- reg = <0xc85 0x40>;
- interrupts-extended = <&wcd9340 20>;
-
- qcom,dout-ports = <6>;
- qcom,din-ports = <2>;
- qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>;
- qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>;
- qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>;
-
- #sound-dai-cells = <1>;
- clocks = <&wcd9340>;
- clock-names = "iface";
- #address-cells = <2>;
- #size-cells = <0>;
- };
- };
- };
-};
-
-&tlmm {
- wcd_intr_default: wcd-intr-default-state {
- pins = "gpio54";
- function = "gpio";
-
- bias-pull-down;
- drive-strength = <2>;
- };
-};
deleted file mode 100644
@@ -1,5752 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDM845 SoC device tree source
- *
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-#include <dt-bindings/clock/qcom,camcc-sdm845.h>
-#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-#include <dt-bindings/clock/qcom,gcc-sdm845.h>
-#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
-#include <dt-bindings/clock/qcom,lpass-sdm845.h>
-#include <dt-bindings/clock/qcom,rpmh.h>
-#include <dt-bindings/clock/qcom,videocc-sdm845.h>
-#include <dt-bindings/dma/qcom-gpi.h>
-#include <dt-bindings/firmware/qcom,scm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interconnect/qcom,osm-l3.h>
-#include <dt-bindings/interconnect/qcom,sdm845.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/phy/phy-qcom-qmp.h>
-#include <dt-bindings/phy/phy-qcom-qusb2.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/reset/qcom,sdm845-aoss.h>
-#include <dt-bindings/reset/qcom,sdm845-pdc.h>
-#include <dt-bindings/soc/qcom,apr.h>
-#include <dt-bindings/soc/qcom,rpmh-rsc.h>
-#include <dt-bindings/clock/qcom,gcc-sdm845.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- interrupt-parent = <&intc>;
-
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c7;
- i2c8 = &i2c8;
- i2c9 = &i2c9;
- i2c10 = &i2c10;
- i2c11 = &i2c11;
- i2c12 = &i2c12;
- i2c13 = &i2c13;
- i2c14 = &i2c14;
- i2c15 = &i2c15;
- spi0 = &spi0;
- spi1 = &spi1;
- spi2 = &spi2;
- spi3 = &spi3;
- spi4 = &spi4;
- spi5 = &spi5;
- spi6 = &spi6;
- spi7 = &spi7;
- spi8 = &spi8;
- spi9 = &spi9;
- spi10 = &spi10;
- spi11 = &spi11;
- spi12 = &spi12;
- spi13 = &spi13;
- spi14 = &spi14;
- spi15 = &spi15;
- };
-
- chosen { };
-
- clocks {
- xo_board: xo-board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <38400000>;
- clock-output-names = "xo_board";
- };
-
- sleep_clk: sleep-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32764>;
- };
- };
-
- cpus: cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x0>;
- clocks = <&cpufreq_hw 0>;
- enable-method = "psci";
- capacity-dmips-mhz = <611>;
- dynamic-power-coefficient = <154>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
- <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
- power-domains = <&CPU_PD0>;
- power-domain-names = "psci";
- #cooling-cells = <2>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&L3_0>;
- L3_0: l3-cache {
- compatible = "cache";
- cache-level = <3>;
- cache-unified;
- };
- };
- };
-
- CPU1: cpu@100 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x100>;
- clocks = <&cpufreq_hw 0>;
- enable-method = "psci";
- capacity-dmips-mhz = <611>;
- dynamic-power-coefficient = <154>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
- <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
- power-domains = <&CPU_PD1>;
- power-domain-names = "psci";
- #cooling-cells = <2>;
- next-level-cache = <&L2_100>;
- L2_100: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU2: cpu@200 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x200>;
- clocks = <&cpufreq_hw 0>;
- enable-method = "psci";
- capacity-dmips-mhz = <611>;
- dynamic-power-coefficient = <154>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
- <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
- power-domains = <&CPU_PD2>;
- power-domain-names = "psci";
- #cooling-cells = <2>;
- next-level-cache = <&L2_200>;
- L2_200: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU3: cpu@300 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x300>;
- clocks = <&cpufreq_hw 0>;
- enable-method = "psci";
- capacity-dmips-mhz = <611>;
- dynamic-power-coefficient = <154>;
- qcom,freq-domain = <&cpufreq_hw 0>;
- operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
- <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
- #cooling-cells = <2>;
- power-domains = <&CPU_PD3>;
- power-domain-names = "psci";
- next-level-cache = <&L2_300>;
- L2_300: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU4: cpu@400 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x400>;
- clocks = <&cpufreq_hw 1>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- dynamic-power-coefficient = <442>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
- <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
- power-domains = <&CPU_PD4>;
- power-domain-names = "psci";
- #cooling-cells = <2>;
- next-level-cache = <&L2_400>;
- L2_400: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU5: cpu@500 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x500>;
- clocks = <&cpufreq_hw 1>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- dynamic-power-coefficient = <442>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
- <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
- power-domains = <&CPU_PD5>;
- power-domain-names = "psci";
- #cooling-cells = <2>;
- next-level-cache = <&L2_500>;
- L2_500: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU6: cpu@600 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x600>;
- clocks = <&cpufreq_hw 1>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- dynamic-power-coefficient = <442>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
- <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
- power-domains = <&CPU_PD6>;
- power-domain-names = "psci";
- #cooling-cells = <2>;
- next-level-cache = <&L2_600>;
- L2_600: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&L3_0>;
- };
- };
-
- CPU7: cpu@700 {
- device_type = "cpu";
- compatible = "qcom,kryo385";
- reg = <0x0 0x700>;
- clocks = <&cpufreq_hw 1>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- dynamic-power-coefficient = <442>;
- qcom,freq-domain = <&cpufreq_hw 1>;
- operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
- <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
- power-domains = <&CPU_PD7>;
- power-domain-names = "psci";
- #cooling-cells = <2>;
- next-level-cache = <&L2_700>;
- L2_700: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&L3_0>;
- };
- };
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&CPU0>;
- };
-
- core1 {
- cpu = <&CPU1>;
- };
-
- core2 {
- cpu = <&CPU2>;
- };
-
- core3 {
- cpu = <&CPU3>;
- };
-
- core4 {
- cpu = <&CPU4>;
- };
-
- core5 {
- cpu = <&CPU5>;
- };
-
- core6 {
- cpu = <&CPU6>;
- };
-
- core7 {
- cpu = <&CPU7>;
- };
- };
- };
-
- cpu_idle_states: idle-states {
- entry-method = "psci";
-
- LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
- compatible = "arm,idle-state";
- idle-state-name = "little-rail-power-collapse";
- arm,psci-suspend-param = <0x40000004>;
- entry-latency-us = <350>;
- exit-latency-us = <461>;
- min-residency-us = <1890>;
- local-timer-stop;
- };
-
- BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
- compatible = "arm,idle-state";
- idle-state-name = "big-rail-power-collapse";
- arm,psci-suspend-param = <0x40000004>;
- entry-latency-us = <264>;
- exit-latency-us = <621>;
- min-residency-us = <952>;
- local-timer-stop;
- };
- };
-
- domain-idle-states {
- CLUSTER_SLEEP_0: cluster-sleep-0 {
- compatible = "domain-idle-state";
- arm,psci-suspend-param = <0x4100c244>;
- entry-latency-us = <3263>;
- exit-latency-us = <6562>;
- min-residency-us = <9987>;
- };
- };
- };
-
- firmware {
- scm {
- compatible = "qcom,scm-sdm845", "qcom,scm";
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- /* We expect the bootloader to fill in the size */
- reg = <0 0x80000000 0 0>;
- };
-
- cpu0_opp_table: opp-table-cpu0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- cpu0_opp1: opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- opp-peak-kBps = <800000 4800000>;
- };
-
- cpu0_opp2: opp-403200000 {
- opp-hz = /bits/ 64 <403200000>;
- opp-peak-kBps = <800000 4800000>;
- };
-
- cpu0_opp3: opp-480000000 {
- opp-hz = /bits/ 64 <480000000>;
- opp-peak-kBps = <800000 6451200>;
- };
-
- cpu0_opp4: opp-576000000 {
- opp-hz = /bits/ 64 <576000000>;
- opp-peak-kBps = <800000 6451200>;
- };
-
- cpu0_opp5: opp-652800000 {
- opp-hz = /bits/ 64 <652800000>;
- opp-peak-kBps = <800000 7680000>;
- };
-
- cpu0_opp6: opp-748800000 {
- opp-hz = /bits/ 64 <748800000>;
- opp-peak-kBps = <1804000 9216000>;
- };
-
- cpu0_opp7: opp-825600000 {
- opp-hz = /bits/ 64 <825600000>;
- opp-peak-kBps = <1804000 9216000>;
- };
-
- cpu0_opp8: opp-902400000 {
- opp-hz = /bits/ 64 <902400000>;
- opp-peak-kBps = <1804000 10444800>;
- };
-
- cpu0_opp9: opp-979200000 {
- opp-hz = /bits/ 64 <979200000>;
- opp-peak-kBps = <1804000 11980800>;
- };
-
- cpu0_opp10: opp-1056000000 {
- opp-hz = /bits/ 64 <1056000000>;
- opp-peak-kBps = <1804000 11980800>;
- };
-
- cpu0_opp11: opp-1132800000 {
- opp-hz = /bits/ 64 <1132800000>;
- opp-peak-kBps = <2188000 13516800>;
- };
-
- cpu0_opp12: opp-1228800000 {
- opp-hz = /bits/ 64 <1228800000>;
- opp-peak-kBps = <2188000 15052800>;
- };
-
- cpu0_opp13: opp-1324800000 {
- opp-hz = /bits/ 64 <1324800000>;
- opp-peak-kBps = <2188000 16588800>;
- };
-
- cpu0_opp14: opp-1420800000 {
- opp-hz = /bits/ 64 <1420800000>;
- opp-peak-kBps = <3072000 18124800>;
- };
-
- cpu0_opp15: opp-1516800000 {
- opp-hz = /bits/ 64 <1516800000>;
- opp-peak-kBps = <3072000 19353600>;
- };
-
- cpu0_opp16: opp-1612800000 {
- opp-hz = /bits/ 64 <1612800000>;
- opp-peak-kBps = <4068000 19353600>;
- };
-
- cpu0_opp17: opp-1689600000 {
- opp-hz = /bits/ 64 <1689600000>;
- opp-peak-kBps = <4068000 20889600>;
- };
-
- cpu0_opp18: opp-1766400000 {
- opp-hz = /bits/ 64 <1766400000>;
- opp-peak-kBps = <4068000 22425600>;
- };
- };
-
- cpu4_opp_table: opp-table-cpu4 {
- compatible = "operating-points-v2";
- opp-shared;
-
- cpu4_opp1: opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- opp-peak-kBps = <800000 4800000>;
- };
-
- cpu4_opp2: opp-403200000 {
- opp-hz = /bits/ 64 <403200000>;
- opp-peak-kBps = <800000 4800000>;
- };
-
- cpu4_opp3: opp-480000000 {
- opp-hz = /bits/ 64 <480000000>;
- opp-peak-kBps = <1804000 4800000>;
- };
-
- cpu4_opp4: opp-576000000 {
- opp-hz = /bits/ 64 <576000000>;
- opp-peak-kBps = <1804000 4800000>;
- };
-
- cpu4_opp5: opp-652800000 {
- opp-hz = /bits/ 64 <652800000>;
- opp-peak-kBps = <1804000 4800000>;
- };
-
- cpu4_opp6: opp-748800000 {
- opp-hz = /bits/ 64 <748800000>;
- opp-peak-kBps = <1804000 4800000>;
- };
-
- cpu4_opp7: opp-825600000 {
- opp-hz = /bits/ 64 <825600000>;
- opp-peak-kBps = <2188000 9216000>;
- };
-
- cpu4_opp8: opp-902400000 {
- opp-hz = /bits/ 64 <902400000>;
- opp-peak-kBps = <2188000 9216000>;
- };
-
- cpu4_opp9: opp-979200000 {
- opp-hz = /bits/ 64 <979200000>;
- opp-peak-kBps = <2188000 9216000>;
- };
-
- cpu4_opp10: opp-1056000000 {
- opp-hz = /bits/ 64 <1056000000>;
- opp-peak-kBps = <3072000 9216000>;
- };
-
- cpu4_opp11: opp-1132800000 {
- opp-hz = /bits/ 64 <1132800000>;
- opp-peak-kBps = <3072000 11980800>;
- };
-
- cpu4_opp12: opp-1209600000 {
- opp-hz = /bits/ 64 <1209600000>;
- opp-peak-kBps = <4068000 11980800>;
- };
-
- cpu4_opp13: opp-1286400000 {
- opp-hz = /bits/ 64 <1286400000>;
- opp-peak-kBps = <4068000 11980800>;
- };
-
- cpu4_opp14: opp-1363200000 {
- opp-hz = /bits/ 64 <1363200000>;
- opp-peak-kBps = <4068000 15052800>;
- };
-
- cpu4_opp15: opp-1459200000 {
- opp-hz = /bits/ 64 <1459200000>;
- opp-peak-kBps = <4068000 15052800>;
- };
-
- cpu4_opp16: opp-1536000000 {
- opp-hz = /bits/ 64 <1536000000>;
- opp-peak-kBps = <5412000 15052800>;
- };
-
- cpu4_opp17: opp-1612800000 {
- opp-hz = /bits/ 64 <1612800000>;
- opp-peak-kBps = <5412000 15052800>;
- };
-
- cpu4_opp18: opp-1689600000 {
- opp-hz = /bits/ 64 <1689600000>;
- opp-peak-kBps = <5412000 19353600>;
- };
-
- cpu4_opp19: opp-1766400000 {
- opp-hz = /bits/ 64 <1766400000>;
- opp-peak-kBps = <6220000 19353600>;
- };
-
- cpu4_opp20: opp-1843200000 {
- opp-hz = /bits/ 64 <1843200000>;
- opp-peak-kBps = <6220000 19353600>;
- };
-
- cpu4_opp21: opp-1920000000 {
- opp-hz = /bits/ 64 <1920000000>;
- opp-peak-kBps = <7216000 19353600>;
- };
-
- cpu4_opp22: opp-1996800000 {
- opp-hz = /bits/ 64 <1996800000>;
- opp-peak-kBps = <7216000 20889600>;
- };
-
- cpu4_opp23: opp-2092800000 {
- opp-hz = /bits/ 64 <2092800000>;
- opp-peak-kBps = <7216000 20889600>;
- };
-
- cpu4_opp24: opp-2169600000 {
- opp-hz = /bits/ 64 <2169600000>;
- opp-peak-kBps = <7216000 20889600>;
- };
-
- cpu4_opp25: opp-2246400000 {
- opp-hz = /bits/ 64 <2246400000>;
- opp-peak-kBps = <7216000 20889600>;
- };
-
- cpu4_opp26: opp-2323200000 {
- opp-hz = /bits/ 64 <2323200000>;
- opp-peak-kBps = <7216000 20889600>;
- };
-
- cpu4_opp27: opp-2400000000 {
- opp-hz = /bits/ 64 <2400000000>;
- opp-peak-kBps = <7216000 22425600>;
- };
-
- cpu4_opp28: opp-2476800000 {
- opp-hz = /bits/ 64 <2476800000>;
- opp-peak-kBps = <7216000 22425600>;
- };
-
- cpu4_opp29: opp-2553600000 {
- opp-hz = /bits/ 64 <2553600000>;
- opp-peak-kBps = <7216000 22425600>;
- };
-
- cpu4_opp30: opp-2649600000 {
- opp-hz = /bits/ 64 <2649600000>;
- opp-peak-kBps = <7216000 22425600>;
- };
-
- cpu4_opp31: opp-2745600000 {
- opp-hz = /bits/ 64 <2745600000>;
- opp-peak-kBps = <7216000 25497600>;
- };
-
- cpu4_opp32: opp-2803200000 {
- opp-hz = /bits/ 64 <2803200000>;
- opp-peak-kBps = <7216000 25497600>;
- };
- };
-
- dsi_opp_table: opp-table-dsi {
- compatible = "operating-points-v2";
-
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-180000000 {
- opp-hz = /bits/ 64 <180000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-275000000 {
- opp-hz = /bits/ 64 <275000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-328580000 {
- opp-hz = /bits/ 64 <328580000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
-
- opp-358000000 {
- opp-hz = /bits/ 64 <358000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
-
- qspi_opp_table: opp-table-qspi {
- compatible = "operating-points-v2";
-
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-150000000 {
- opp-hz = /bits/ 64 <150000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
-
- qup_opp_table: opp-table-qup {
- compatible = "operating-points-v2";
-
- opp-50000000 {
- opp-hz = /bits/ 64 <50000000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-75000000 {
- opp-hz = /bits/ 64 <75000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-128000000 {
- opp-hz = /bits/ 64 <128000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
-
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- psci: psci {
- compatible = "arm,psci-1.0";
- method = "smc";
-
- CPU_PD0: power-domain-cpu0 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
- };
-
- CPU_PD1: power-domain-cpu1 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
- };
-
- CPU_PD2: power-domain-cpu2 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
- };
-
- CPU_PD3: power-domain-cpu3 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
- };
-
- CPU_PD4: power-domain-cpu4 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_0>;
- };
-
- CPU_PD5: power-domain-cpu5 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_0>;
- };
-
- CPU_PD6: power-domain-cpu6 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_0>;
- };
-
- CPU_PD7: power-domain-cpu7 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_0>;
- };
-
- CLUSTER_PD: power-domain-cluster {
- #power-domain-cells = <0>;
- domain-idle-states = <&CLUSTER_SLEEP_0>;
- };
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- hyp_mem: hyp-mem@85700000 {
- reg = <0 0x85700000 0 0x600000>;
- no-map;
- };
-
- xbl_mem: xbl-mem@85e00000 {
- reg = <0 0x85e00000 0 0x100000>;
- no-map;
- };
-
- aop_mem: aop-mem@85fc0000 {
- reg = <0 0x85fc0000 0 0x20000>;
- no-map;
- };
-
- aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 {
- compatible = "qcom,cmd-db";
- reg = <0x0 0x85fe0000 0 0x20000>;
- no-map;
- };
-
- smem@86000000 {
- compatible = "qcom,smem";
- reg = <0x0 0x86000000 0 0x200000>;
- no-map;
- hwlocks = <&tcsr_mutex 3>;
- };
-
- tz_mem: tz@86200000 {
- reg = <0 0x86200000 0 0x2d00000>;
- no-map;
- };
-
- rmtfs_mem: rmtfs@88f00000 {
- compatible = "qcom,rmtfs-mem";
- reg = <0 0x88f00000 0 0x200000>;
- no-map;
-
- qcom,client-id = <1>;
- qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
- };
-
- qseecom_mem: qseecom@8ab00000 {
- reg = <0 0x8ab00000 0 0x1400000>;
- no-map;
- };
-
- camera_mem: camera-mem@8bf00000 {
- reg = <0 0x8bf00000 0 0x500000>;
- no-map;
- };
-
- ipa_fw_mem: ipa-fw@8c400000 {
- reg = <0 0x8c400000 0 0x10000>;
- no-map;
- };
-
- ipa_gsi_mem: ipa-gsi@8c410000 {
- reg = <0 0x8c410000 0 0x5000>;
- no-map;
- };
-
- gpu_mem: gpu@8c415000 {
- reg = <0 0x8c415000 0 0x2000>;
- no-map;
- };
-
- adsp_mem: adsp@8c500000 {
- reg = <0 0x8c500000 0 0x1a00000>;
- no-map;
- };
-
- wlan_msa_mem: wlan-msa@8df00000 {
- reg = <0 0x8df00000 0 0x100000>;
- no-map;
- };
-
- mpss_region: mpss@8e000000 {
- reg = <0 0x8e000000 0 0x7800000>;
- no-map;
- };
-
- venus_mem: venus@95800000 {
- reg = <0 0x95800000 0 0x500000>;
- no-map;
- };
-
- cdsp_mem: cdsp@95d00000 {
- reg = <0 0x95d00000 0 0x800000>;
- no-map;
- };
-
- mba_region: mba@96500000 {
- reg = <0 0x96500000 0 0x200000>;
- no-map;
- };
-
- slpi_mem: slpi@96700000 {
- reg = <0 0x96700000 0 0x1400000>;
- no-map;
- };
-
- spss_mem: spss@97b00000 {
- reg = <0 0x97b00000 0 0x100000>;
- no-map;
- };
-
- mdata_mem: mpss-metadata {
- alloc-ranges = <0 0xa0000000 0 0x20000000>;
- size = <0 0x4000>;
- no-map;
- };
-
- fastrpc_mem: fastrpc {
- compatible = "shared-dma-pool";
- alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
- alignment = <0x0 0x400000>;
- size = <0x0 0x1000000>;
- reusable;
- };
- };
-
- adsp_pas: remoteproc-adsp {
- compatible = "qcom,sdm845-adsp-pas";
-
- interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- memory-region = <&adsp_mem>;
-
- qcom,qmp = <&aoss_qmp>;
-
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
- label = "lpass";
- qcom,remote-pid = <2>;
- mboxes = <&apss_shared 8>;
-
- apr {
- compatible = "qcom,apr-v2";
- qcom,glink-channels = "apr_audio_svc";
- qcom,domain = <APR_DOMAIN_ADSP>;
- #address-cells = <1>;
- #size-cells = <0>;
- qcom,intents = <512 20>;
-
- service@3 {
- reg = <APR_SVC_ADSP_CORE>;
- compatible = "qcom,q6core";
- qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
- };
-
- q6afe: service@4 {
- compatible = "qcom,q6afe";
- reg = <APR_SVC_AFE>;
- qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
- q6afedai: dais {
- compatible = "qcom,q6afe-dais";
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <1>;
- };
- };
-
- q6asm: service@7 {
- compatible = "qcom,q6asm";
- reg = <APR_SVC_ASM>;
- qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
- q6asmdai: dais {
- compatible = "qcom,q6asm-dais";
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <1>;
- iommus = <&apps_smmu 0x1821 0x0>;
- };
- };
-
- q6adm: service@8 {
- compatible = "qcom,q6adm";
- reg = <APR_SVC_ADM>;
- qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
- q6routing: routing {
- compatible = "qcom,q6adm-routing";
- #sound-dai-cells = <0>;
- };
- };
- };
-
- fastrpc {
- compatible = "qcom,fastrpc";
- qcom,glink-channels = "fastrpcglink-apps-dsp";
- label = "adsp";
- qcom,non-secure-domain;
- #address-cells = <1>;
- #size-cells = <0>;
-
- compute-cb@3 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <3>;
- iommus = <&apps_smmu 0x1823 0x0>;
- };
-
- compute-cb@4 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <4>;
- iommus = <&apps_smmu 0x1824 0x0>;
- };
- };
- };
- };
-
- cdsp_pas: remoteproc-cdsp {
- compatible = "qcom,sdm845-cdsp-pas";
-
- interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- memory-region = <&cdsp_mem>;
-
- qcom,qmp = <&aoss_qmp>;
-
- qcom,smem-states = <&cdsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
- label = "turing";
- qcom,remote-pid = <5>;
- mboxes = <&apss_shared 4>;
- fastrpc {
- compatible = "qcom,fastrpc";
- qcom,glink-channels = "fastrpcglink-apps-dsp";
- label = "cdsp";
- qcom,non-secure-domain;
- #address-cells = <1>;
- #size-cells = <0>;
-
- compute-cb@1 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <1>;
- iommus = <&apps_smmu 0x1401 0x30>;
- };
-
- compute-cb@2 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <2>;
- iommus = <&apps_smmu 0x1402 0x30>;
- };
-
- compute-cb@3 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <3>;
- iommus = <&apps_smmu 0x1403 0x30>;
- };
-
- compute-cb@4 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <4>;
- iommus = <&apps_smmu 0x1404 0x30>;
- };
-
- compute-cb@5 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <5>;
- iommus = <&apps_smmu 0x1405 0x30>;
- };
-
- compute-cb@6 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <6>;
- iommus = <&apps_smmu 0x1406 0x30>;
- };
-
- compute-cb@7 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <7>;
- iommus = <&apps_smmu 0x1407 0x30>;
- };
-
- compute-cb@8 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <8>;
- iommus = <&apps_smmu 0x1408 0x30>;
- };
- };
- };
- };
-
- smp2p-cdsp {
- compatible = "qcom,smp2p";
- qcom,smem = <94>, <432>;
-
- interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
-
- mboxes = <&apss_shared 6>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <5>;
-
- cdsp_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- cdsp_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- smp2p-lpass {
- compatible = "qcom,smp2p";
- qcom,smem = <443>, <429>;
-
- interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
-
- mboxes = <&apss_shared 10>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <2>;
-
- adsp_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- adsp_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- smp2p-mpss {
- compatible = "qcom,smp2p";
- qcom,smem = <435>, <428>;
- interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
- mboxes = <&apss_shared 14>;
- qcom,local-pid = <0>;
- qcom,remote-pid = <1>;
-
- modem_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- modem_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- ipa_smp2p_out: ipa-ap-to-modem {
- qcom,entry-name = "ipa";
- #qcom,smem-state-cells = <1>;
- };
-
- ipa_smp2p_in: ipa-modem-to-ap {
- qcom,entry-name = "ipa";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- smp2p-slpi {
- compatible = "qcom,smp2p";
- qcom,smem = <481>, <430>;
- interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
- mboxes = <&apss_shared 26>;
- qcom,local-pid = <0>;
- qcom,remote-pid = <3>;
-
- slpi_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- slpi_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- soc: soc@0 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0 0 0 0 0x10 0>;
- dma-ranges = <0 0 0 0 0x10 0>;
- compatible = "simple-bus";
-
- gcc: clock-controller@100000 {
- compatible = "qcom,gcc-sdm845";
- reg = <0 0x00100000 0 0x1f0000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&rpmhcc RPMH_CXO_CLK_A>,
- <&sleep_clk>,
- <&pcie0_phy>,
- <&pcie1_phy>;
- clock-names = "bi_tcxo",
- "bi_tcxo_ao",
- "sleep_clk",
- "pcie_0_pipe_clk",
- "pcie_1_pipe_clk";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- power-domains = <&rpmhpd SDM845_CX>;
- };
-
- qfprom@784000 {
- compatible = "qcom,sdm845-qfprom", "qcom,qfprom";
- reg = <0 0x00784000 0 0x8ff>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- qusb2p_hstx_trim: hstx-trim-primary@1eb {
- reg = <0x1eb 0x1>;
- bits = <1 4>;
- };
-
- qusb2s_hstx_trim: hstx-trim-secondary@1eb {
- reg = <0x1eb 0x2>;
- bits = <6 4>;
- };
- };
-
- rng: rng@793000 {
- compatible = "qcom,prng-ee";
- reg = <0 0x00793000 0 0x1000>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "core";
- };
-
- gpi_dma0: dma-controller@800000 {
- #dma-cells = <3>;
- compatible = "qcom,sdm845-gpi-dma";
- reg = <0 0x00800000 0 0x60000>;
- interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
- dma-channels = <13>;
- dma-channel-mask = <0xfa>;
- iommus = <&apps_smmu 0x0016 0x0>;
- status = "disabled";
- };
-
- qupv3_id_0: geniqup@8c0000 {
- compatible = "qcom,geni-se-qup";
- reg = <0 0x008c0000 0 0x6000>;
- clock-names = "m-ahb", "s-ahb";
- clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
- <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
- iommus = <&apps_smmu 0x3 0x0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core";
- status = "disabled";
-
- i2c0: i2c@880000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00880000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c0_default>;
- interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
- <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
- <&gpi_dma0 1 0 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi0: spi@880000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00880000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi0_default>;
- interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
- <&gpi_dma0 1 0 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart0: serial@880000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00880000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart0_default>;
- interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c1: i2c@884000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00884000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c1_default>;
- interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
- <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
- <&gpi_dma0 1 1 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi1: spi@884000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00884000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi1_default>;
- interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
- <&gpi_dma0 1 1 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart1: serial@884000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00884000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart1_default>;
- interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c2: i2c@888000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00888000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c2_default>;
- interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
- <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
- <&gpi_dma0 1 2 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi2: spi@888000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00888000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi2_default>;
- interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
- <&gpi_dma0 1 2 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart2: serial@888000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00888000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart2_default>;
- interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c3: i2c@88c000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x0088c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c3_default>;
- interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
- <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
- <&gpi_dma0 1 3 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi3: spi@88c000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x0088c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi3_default>;
- interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
- <&gpi_dma0 1 3 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart3: serial@88c000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x0088c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart3_default>;
- interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c4: i2c@890000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00890000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c4_default>;
- interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
- <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
- <&gpi_dma0 1 4 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi4: spi@890000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00890000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi4_default>;
- interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
- <&gpi_dma0 1 4 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart4: serial@890000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00890000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart4_default>;
- interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c5: i2c@894000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00894000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c5_default>;
- interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
- <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
- <&gpi_dma0 1 5 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi5: spi@894000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00894000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi5_default>;
- interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
- <&gpi_dma0 1 5 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart5: serial@894000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00894000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart5_default>;
- interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c6: i2c@898000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00898000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c6_default>;
- interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
- <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
- <&gpi_dma0 1 6 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi6: spi@898000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00898000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi6_default>;
- interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
- <&gpi_dma0 1 6 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart6: serial@898000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00898000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart6_default>;
- interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c7: i2c@89c000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x0089c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c7_default>;
- interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- status = "disabled";
- };
-
- spi7: spi@89c000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x0089c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi7_default>;
- interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
- <&gpi_dma0 1 7 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart7: serial@89c000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x0089c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart7_default>;
- interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
- };
-
- gpi_dma1: dma-controller@a00000 {
- #dma-cells = <3>;
- compatible = "qcom,sdm845-gpi-dma";
- reg = <0 0x00a00000 0 0x60000>;
- interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
- dma-channels = <13>;
- dma-channel-mask = <0xfa>;
- iommus = <&apps_smmu 0x06d6 0x0>;
- status = "disabled";
- };
-
- qupv3_id_1: geniqup@ac0000 {
- compatible = "qcom,geni-se-qup";
- reg = <0 0x00ac0000 0 0x6000>;
- clock-names = "m-ahb", "s-ahb";
- clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
- <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
- iommus = <&apps_smmu 0x6c3 0x0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core";
- status = "disabled";
-
- i2c8: i2c@a80000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00a80000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c8_default>;
- interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
- <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
- <&gpi_dma1 1 0 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi8: spi@a80000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00a80000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi8_default>;
- interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
- <&gpi_dma1 1 0 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart8: serial@a80000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00a80000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart8_default>;
- interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c9: i2c@a84000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00a84000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c9_default>;
- interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
- <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
- <&gpi_dma1 1 1 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi9: spi@a84000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00a84000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi9_default>;
- interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
- <&gpi_dma1 1 1 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart9: serial@a84000 {
- compatible = "qcom,geni-debug-uart";
- reg = <0 0x00a84000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart9_default>;
- interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c10: i2c@a88000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00a88000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c10_default>;
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
- <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
- <&gpi_dma1 1 2 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi10: spi@a88000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00a88000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi10_default>;
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
- <&gpi_dma1 1 2 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart10: serial@a88000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00a88000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart10_default>;
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c11: i2c@a8c000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00a8c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c11_default>;
- interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
- <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
- <&gpi_dma1 1 3 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi11: spi@a8c000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00a8c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi11_default>;
- interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
- <&gpi_dma1 1 3 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart11: serial@a8c000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00a8c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart11_default>;
- interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c12: i2c@a90000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00a90000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c12_default>;
- interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
- <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
- <&gpi_dma1 1 4 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi12: spi@a90000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00a90000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi12_default>;
- interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
- <&gpi_dma1 1 4 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart12: serial@a90000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00a90000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart12_default>;
- interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c13: i2c@a94000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00a94000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c13_default>;
- interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
- <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
- <&gpi_dma1 1 5 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi13: spi@a94000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00a94000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi13_default>;
- interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
- <&gpi_dma1 1 5 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart13: serial@a94000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00a94000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart13_default>;
- interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c14: i2c@a98000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00a98000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c14_default>;
- interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
- <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
- <&gpi_dma1 1 6 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- spi14: spi@a98000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00a98000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi14_default>;
- interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
- <&gpi_dma1 1 6 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart14: serial@a98000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00a98000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart14_default>;
- interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
-
- i2c15: i2c@a9c000 {
- compatible = "qcom,geni-i2c";
- reg = <0 0x00a9c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_i2c15_default>;
- interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- status = "disabled";
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
- <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "qup-core", "qup-config", "qup-memory";
- dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
- <&gpi_dma1 1 7 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
- };
-
- spi15: spi@a9c000 {
- compatible = "qcom,geni-spi";
- reg = <0 0x00a9c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_spi15_default>;
- interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
- <&gpi_dma1 1 7 QCOM_GPI_SPI>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- uart15: serial@a9c000 {
- compatible = "qcom,geni-uart";
- reg = <0 0x00a9c000 0 0x4000>;
- clock-names = "se";
- clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
- pinctrl-names = "default";
- pinctrl-0 = <&qup_uart15_default>;
- interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qup_opp_table>;
- interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
- interconnect-names = "qup-core", "qup-config";
- status = "disabled";
- };
- };
-
- llcc: system-cache-controller@1100000 {
- compatible = "qcom,sdm845-llcc";
- reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>,
- <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
- <0 0x01300000 0 0x50000>;
- reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
- "llcc3_base", "llcc_broadcast_base";
- interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- dma@10a2000 {
- compatible = "qcom,sdm845-dcc", "qcom,dcc";
- reg = <0x0 0x010a2000 0x0 0x1000>,
- <0x0 0x010ae000 0x0 0x2000>;
- };
-
- pmu@114a000 {
- compatible = "qcom,sdm845-llcc-bwmon";
- reg = <0 0x0114a000 0 0x1000>;
- interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
- interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>;
-
- operating-points-v2 = <&llcc_bwmon_opp_table>;
-
- llcc_bwmon_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- /*
- * The interconnect path bandwidth taken from
- * cpu4_opp_table bandwidth for gladiator_noc-mem_noc
- * interconnect. This also matches the
- * bandwidth table of qcom,llccbw (qcom,bw-tbl,
- * bus width: 4 bytes) from msm-4.9 downstream
- * kernel.
- */
- opp-0 {
- opp-peak-kBps = <800000>;
- };
- opp-1 {
- opp-peak-kBps = <1804000>;
- };
- opp-2 {
- opp-peak-kBps = <3072000>;
- };
- opp-3 {
- opp-peak-kBps = <5412000>;
- };
- opp-4 {
- opp-peak-kBps = <7216000>;
- };
- };
- };
-
- pmu@1436400 {
- compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon";
- reg = <0 0x01436400 0 0x600>;
- interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
- interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
-
- operating-points-v2 = <&cpu_bwmon_opp_table>;
-
- cpu_bwmon_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- /*
- * The interconnect path bandwidth taken from
- * cpu4_opp_table bandwidth for OSM L3
- * interconnect. This also matches the OSM L3
- * from bandwidth table of qcom,cpu4-l3lat-mon
- * (qcom,core-dev-table, bus width: 16 bytes)
- * from msm-4.9 downstream kernel.
- */
- opp-0 {
- opp-peak-kBps = <4800000>;
- };
- opp-1 {
- opp-peak-kBps = <9216000>;
- };
- opp-2 {
- opp-peak-kBps = <15052800>;
- };
- opp-3 {
- opp-peak-kBps = <20889600>;
- };
- opp-4 {
- opp-peak-kBps = <25497600>;
- };
- };
- };
-
- pcie0: pci@1c00000 {
- compatible = "qcom,pcie-sdm845";
- reg = <0 0x01c00000 0 0x2000>,
- <0 0x60000000 0 0xf1d>,
- <0 0x60000f20 0 0xa8>,
- <0 0x60100000 0 0x100000>,
- <0 0x01c07000 0 0x1000>;
- reg-names = "parf", "dbi", "elbi", "config", "mhi";
- device_type = "pci";
- linux,pci-domain = <0>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
- <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
-
- interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
- <&gcc GCC_PCIE_0_AUX_CLK>,
- <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
- <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave",
- "slave_q2a",
- "tbu";
-
- iommu-map = <0x0 &apps_smmu 0x1c10 0x1>,
- <0x100 &apps_smmu 0x1c11 0x1>,
- <0x200 &apps_smmu 0x1c12 0x1>,
- <0x300 &apps_smmu 0x1c13 0x1>,
- <0x400 &apps_smmu 0x1c14 0x1>,
- <0x500 &apps_smmu 0x1c15 0x1>,
- <0x600 &apps_smmu 0x1c16 0x1>,
- <0x700 &apps_smmu 0x1c17 0x1>,
- <0x800 &apps_smmu 0x1c18 0x1>,
- <0x900 &apps_smmu 0x1c19 0x1>,
- <0xa00 &apps_smmu 0x1c1a 0x1>,
- <0xb00 &apps_smmu 0x1c1b 0x1>,
- <0xc00 &apps_smmu 0x1c1c 0x1>,
- <0xd00 &apps_smmu 0x1c1d 0x1>,
- <0xe00 &apps_smmu 0x1c1e 0x1>,
- <0xf00 &apps_smmu 0x1c1f 0x1>;
-
- resets = <&gcc GCC_PCIE_0_BCR>;
- reset-names = "pci";
-
- power-domains = <&gcc PCIE_0_GDSC>;
-
- phys = <&pcie0_phy>;
- phy-names = "pciephy";
-
- status = "disabled";
- };
-
- pcie0_phy: phy@1c06000 {
- compatible = "qcom,sdm845-qmp-pcie-phy";
- reg = <0 0x01c06000 0 0x1000>;
- clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
- <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_0_CLKREF_CLK>,
- <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
- <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "aux",
- "cfg_ahb",
- "ref",
- "refgen",
- "pipe";
-
- clock-output-names = "pcie_0_pipe_clk";
- #clock-cells = <0>;
-
- #phy-cells = <0>;
-
- resets = <&gcc GCC_PCIE_0_PHY_BCR>;
- reset-names = "phy";
-
- assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
- assigned-clock-rates = <100000000>;
-
- status = "disabled";
- };
-
- pcie1: pci@1c08000 {
- compatible = "qcom,pcie-sdm845";
- reg = <0 0x01c08000 0 0x2000>,
- <0 0x40000000 0 0xf1d>,
- <0 0x40000f20 0 0xa8>,
- <0 0x40100000 0 0x100000>,
- <0 0x01c0c000 0 0x1000>;
- reg-names = "parf", "dbi", "elbi", "config", "mhi";
- device_type = "pci";
- linux,pci-domain = <1>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
-
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
- <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
-
- interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
- <&gcc GCC_PCIE_1_AUX_CLK>,
- <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
- <&gcc GCC_PCIE_1_CLKREF_CLK>,
- <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave",
- "slave_q2a",
- "ref",
- "tbu";
-
- assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
- assigned-clock-rates = <19200000>;
-
- iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
- <0x100 &apps_smmu 0x1c01 0x1>,
- <0x200 &apps_smmu 0x1c02 0x1>,
- <0x300 &apps_smmu 0x1c03 0x1>,
- <0x400 &apps_smmu 0x1c04 0x1>,
- <0x500 &apps_smmu 0x1c05 0x1>,
- <0x600 &apps_smmu 0x1c06 0x1>,
- <0x700 &apps_smmu 0x1c07 0x1>,
- <0x800 &apps_smmu 0x1c08 0x1>,
- <0x900 &apps_smmu 0x1c09 0x1>,
- <0xa00 &apps_smmu 0x1c0a 0x1>,
- <0xb00 &apps_smmu 0x1c0b 0x1>,
- <0xc00 &apps_smmu 0x1c0c 0x1>,
- <0xd00 &apps_smmu 0x1c0d 0x1>,
- <0xe00 &apps_smmu 0x1c0e 0x1>,
- <0xf00 &apps_smmu 0x1c0f 0x1>;
-
- resets = <&gcc GCC_PCIE_1_BCR>;
- reset-names = "pci";
-
- power-domains = <&gcc PCIE_1_GDSC>;
-
- phys = <&pcie1_phy>;
- phy-names = "pciephy";
-
- status = "disabled";
- };
-
- pcie1_phy: phy@1c0a000 {
- compatible = "qcom,sdm845-qhp-pcie-phy";
- reg = <0 0x01c0a000 0 0x2000>;
- clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
- <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_1_CLKREF_CLK>,
- <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
- <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "aux",
- "cfg_ahb",
- "ref",
- "refgen",
- "pipe";
-
- clock-output-names = "pcie_1_pipe_clk";
- #clock-cells = <0>;
-
- #phy-cells = <0>;
-
- resets = <&gcc GCC_PCIE_1_PHY_BCR>;
- reset-names = "phy";
-
- assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
- assigned-clock-rates = <100000000>;
-
- status = "disabled";
- };
-
- mem_noc: interconnect@1380000 {
- compatible = "qcom,sdm845-mem-noc";
- reg = <0 0x01380000 0 0x27200>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- dc_noc: interconnect@14e0000 {
- compatible = "qcom,sdm845-dc-noc";
- reg = <0 0x014e0000 0 0x400>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- config_noc: interconnect@1500000 {
- compatible = "qcom,sdm845-config-noc";
- reg = <0 0x01500000 0 0x5080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- system_noc: interconnect@1620000 {
- compatible = "qcom,sdm845-system-noc";
- reg = <0 0x01620000 0 0x18080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- aggre1_noc: interconnect@16e0000 {
- compatible = "qcom,sdm845-aggre1-noc";
- reg = <0 0x016e0000 0 0x15080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- aggre2_noc: interconnect@1700000 {
- compatible = "qcom,sdm845-aggre2-noc";
- reg = <0 0x01700000 0 0x1f300>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- mmss_noc: interconnect@1740000 {
- compatible = "qcom,sdm845-mmss-noc";
- reg = <0 0x01740000 0 0x1c100>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- ufs_mem_hc: ufshc@1d84000 {
- compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
- "jedec,ufs-2.0";
- reg = <0 0x01d84000 0 0x2500>,
- <0 0x01d90000 0 0x8000>;
- reg-names = "std", "ice";
- interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
- phy-names = "ufsphy";
- lanes-per-direction = <2>;
- power-domains = <&gcc UFS_PHY_GDSC>;
- #reset-cells = <1>;
- resets = <&gcc GCC_UFS_PHY_BCR>;
- reset-names = "rst";
-
- iommus = <&apps_smmu 0x100 0xf>;
-
- clock-names =
- "core_clk",
- "bus_aggr_clk",
- "iface_clk",
- "core_clk_unipro",
- "ref_clk",
- "tx_lane0_sync_clk",
- "rx_lane0_sync_clk",
- "rx_lane1_sync_clk",
- "ice_core_clk";
- clocks =
- <&gcc GCC_UFS_PHY_AXI_CLK>,
- <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
- <&gcc GCC_UFS_PHY_AHB_CLK>,
- <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
- <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
- freq-table-hz =
- <50000000 200000000>,
- <0 0>,
- <0 0>,
- <37500000 150000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>,
- <75000000 300000000>;
-
- interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
- interconnect-names = "ufs-ddr", "cpu-ufs";
-
- status = "disabled";
- };
-
- ufs_mem_phy: phy@1d87000 {
- compatible = "qcom,sdm845-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x18c>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clock-names = "ref",
- "ref_aux";
- clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
- <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
- resets = <&ufs_mem_hc 0>;
- reset-names = "ufsphy";
- status = "disabled";
-
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x108>,
- <0 0x01d87600 0 0x1e0>,
- <0 0x01d87c00 0 0x1dc>,
- <0 0x01d87800 0 0x108>,
- <0 0x01d87a00 0 0x1e0>;
- #phy-cells = <0>;
- };
- };
-
- cryptobam: dma-controller@1dc4000 {
- compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
- reg = <0 0x01dc4000 0 0x24000>;
- interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rpmhcc RPMH_CE_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- qcom,controlled-remotely;
- iommus = <&apps_smmu 0x704 0x1>,
- <&apps_smmu 0x706 0x1>,
- <&apps_smmu 0x714 0x1>,
- <&apps_smmu 0x716 0x1>;
- };
-
- crypto: crypto@1dfa000 {
- compatible = "qcom,crypto-v5.4";
- reg = <0 0x01dfa000 0 0x6000>;
- clocks = <&gcc GCC_CE1_AHB_CLK>,
- <&gcc GCC_CE1_AXI_CLK>,
- <&rpmhcc RPMH_CE_CLK>;
- clock-names = "iface", "bus", "core";
- dmas = <&cryptobam 6>, <&cryptobam 7>;
- dma-names = "rx", "tx";
- iommus = <&apps_smmu 0x704 0x1>,
- <&apps_smmu 0x706 0x1>,
- <&apps_smmu 0x714 0x1>,
- <&apps_smmu 0x716 0x1>;
- };
-
- ipa: ipa@1e40000 {
- compatible = "qcom,sdm845-ipa";
-
- iommus = <&apps_smmu 0x720 0x0>,
- <&apps_smmu 0x722 0x0>;
- reg = <0 0x01e40000 0 0x7000>,
- <0 0x01e47000 0 0x2000>,
- <0 0x01e04000 0 0x2c000>;
- reg-names = "ipa-reg",
- "ipa-shared",
- "gsi";
-
- interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
- <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
- <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ipa",
- "gsi",
- "ipa-clock-query",
- "ipa-setup-ready";
-
- clocks = <&rpmhcc RPMH_IPA_CLK>;
- clock-names = "core";
-
- interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>,
- <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
- interconnect-names = "memory",
- "imem",
- "config";
-
- qcom,smem-states = <&ipa_smp2p_out 0>,
- <&ipa_smp2p_out 1>;
- qcom,smem-state-names = "ipa-clock-enabled-valid",
- "ipa-clock-enabled";
-
- status = "disabled";
- };
-
- tcsr_mutex: hwlock@1f40000 {
- compatible = "qcom,tcsr-mutex";
- reg = <0 0x01f40000 0 0x20000>;
- #hwlock-cells = <1>;
- };
-
- tcsr_regs_1: syscon@1f60000 {
- compatible = "qcom,sdm845-tcsr", "syscon";
- reg = <0 0x01f60000 0 0x20000>;
- };
-
- tlmm: pinctrl@3400000 {
- compatible = "qcom,sdm845-pinctrl";
- reg = <0 0x03400000 0 0xc00000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 151>;
- wakeup-parent = <&pdc_intc>;
-
- cci0_default: cci0-default-state {
- /* SDA, SCL */
- pins = "gpio17", "gpio18";
- function = "cci_i2c";
-
- bias-pull-up;
- drive-strength = <2>; /* 2 mA */
- };
-
- cci0_sleep: cci0-sleep-state {
- /* SDA, SCL */
- pins = "gpio17", "gpio18";
- function = "cci_i2c";
-
- drive-strength = <2>; /* 2 mA */
- bias-pull-down;
- };
-
- cci1_default: cci1-default-state {
- /* SDA, SCL */
- pins = "gpio19", "gpio20";
- function = "cci_i2c";
-
- bias-pull-up;
- drive-strength = <2>; /* 2 mA */
- };
-
- cci1_sleep: cci1-sleep-state {
- /* SDA, SCL */
- pins = "gpio19", "gpio20";
- function = "cci_i2c";
-
- drive-strength = <2>; /* 2 mA */
- bias-pull-down;
- };
-
- qspi_clk: qspi-clk-state {
- pins = "gpio95";
- function = "qspi_clk";
- };
-
- qspi_cs0: qspi-cs0-state {
- pins = "gpio90";
- function = "qspi_cs";
- };
-
- qspi_cs1: qspi-cs1-state {
- pins = "gpio89";
- function = "qspi_cs";
- };
-
- qspi_data0: qspi-data0-state {
- pins = "gpio91";
- function = "qspi_data";
- };
-
- qspi_data1: qspi-data1-state {
- pins = "gpio92";
- function = "qspi_data";
- };
-
- qspi_data23: qspi-data23-state {
- pins = "gpio93", "gpio94";
- function = "qspi_data";
- };
-
- qup_i2c0_default: qup-i2c0-default-state {
- pins = "gpio0", "gpio1";
- function = "qup0";
- };
-
- qup_i2c1_default: qup-i2c1-default-state {
- pins = "gpio17", "gpio18";
- function = "qup1";
- };
-
- qup_i2c2_default: qup-i2c2-default-state {
- pins = "gpio27", "gpio28";
- function = "qup2";
- };
-
- qup_i2c3_default: qup-i2c3-default-state {
- pins = "gpio41", "gpio42";
- function = "qup3";
- };
-
- qup_i2c4_default: qup-i2c4-default-state {
- pins = "gpio89", "gpio90";
- function = "qup4";
- };
-
- qup_i2c5_default: qup-i2c5-default-state {
- pins = "gpio85", "gpio86";
- function = "qup5";
- };
-
- qup_i2c6_default: qup-i2c6-default-state {
- pins = "gpio45", "gpio46";
- function = "qup6";
- };
-
- qup_i2c7_default: qup-i2c7-default-state {
- pins = "gpio93", "gpio94";
- function = "qup7";
- };
-
- qup_i2c8_default: qup-i2c8-default-state {
- pins = "gpio65", "gpio66";
- function = "qup8";
- };
-
- qup_i2c9_default: qup-i2c9-default-state {
- pins = "gpio6", "gpio7";
- function = "qup9";
- };
-
- qup_i2c10_default: qup-i2c10-default-state {
- pins = "gpio55", "gpio56";
- function = "qup10";
- };
-
- qup_i2c11_default: qup-i2c11-default-state {
- pins = "gpio31", "gpio32";
- function = "qup11";
- };
-
- qup_i2c12_default: qup-i2c12-default-state {
- pins = "gpio49", "gpio50";
- function = "qup12";
- };
-
- qup_i2c13_default: qup-i2c13-default-state {
- pins = "gpio105", "gpio106";
- function = "qup13";
- };
-
- qup_i2c14_default: qup-i2c14-default-state {
- pins = "gpio33", "gpio34";
- function = "qup14";
- };
-
- qup_i2c15_default: qup-i2c15-default-state {
- pins = "gpio81", "gpio82";
- function = "qup15";
- };
-
- qup_spi0_default: qup-spi0-default-state {
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- function = "qup0";
- };
-
- qup_spi1_default: qup-spi1-default-state {
- pins = "gpio17", "gpio18", "gpio19", "gpio20";
- function = "qup1";
- };
-
- qup_spi2_default: qup-spi2-default-state {
- pins = "gpio27", "gpio28", "gpio29", "gpio30";
- function = "qup2";
- };
-
- qup_spi3_default: qup-spi3-default-state {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- function = "qup3";
- };
-
- qup_spi4_default: qup-spi4-default-state {
- pins = "gpio89", "gpio90", "gpio91", "gpio92";
- function = "qup4";
- };
-
- qup_spi5_default: qup-spi5-default-state {
- pins = "gpio85", "gpio86", "gpio87", "gpio88";
- function = "qup5";
- };
-
- qup_spi6_default: qup-spi6-default-state {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "qup6";
- };
-
- qup_spi7_default: qup-spi7-default-state {
- pins = "gpio93", "gpio94", "gpio95", "gpio96";
- function = "qup7";
- };
-
- qup_spi8_default: qup-spi8-default-state {
- pins = "gpio65", "gpio66", "gpio67", "gpio68";
- function = "qup8";
- };
-
- qup_spi9_default: qup-spi9-default-state {
- pins = "gpio6", "gpio7", "gpio4", "gpio5";
- function = "qup9";
- };
-
- qup_spi10_default: qup-spi10-default-state {
- pins = "gpio55", "gpio56", "gpio53", "gpio54";
- function = "qup10";
- };
-
- qup_spi11_default: qup-spi11-default-state {
- pins = "gpio31", "gpio32", "gpio33", "gpio34";
- function = "qup11";
- };
-
- qup_spi12_default: qup-spi12-default-state {
- pins = "gpio49", "gpio50", "gpio51", "gpio52";
- function = "qup12";
- };
-
- qup_spi13_default: qup-spi13-default-state {
- pins = "gpio105", "gpio106", "gpio107", "gpio108";
- function = "qup13";
- };
-
- qup_spi14_default: qup-spi14-default-state {
- pins = "gpio33", "gpio34", "gpio31", "gpio32";
- function = "qup14";
- };
-
- qup_spi15_default: qup-spi15-default-state {
- pins = "gpio81", "gpio82", "gpio83", "gpio84";
- function = "qup15";
- };
-
- qup_uart0_default: qup-uart0-default-state {
- qup_uart0_tx: tx-pins {
- pins = "gpio2";
- function = "qup0";
- };
-
- qup_uart0_rx: rx-pins {
- pins = "gpio3";
- function = "qup0";
- };
- };
-
- qup_uart1_default: qup-uart1-default-state {
- qup_uart1_tx: tx-pins {
- pins = "gpio19";
- function = "qup1";
- };
-
- qup_uart1_rx: rx-pins {
- pins = "gpio20";
- function = "qup1";
- };
- };
-
- qup_uart2_default: qup-uart2-default-state {
- qup_uart2_tx: tx-pins {
- pins = "gpio29";
- function = "qup2";
- };
-
- qup_uart2_rx: rx-pins {
- pins = "gpio30";
- function = "qup2";
- };
- };
-
- qup_uart3_default: qup-uart3-default-state {
- qup_uart3_tx: tx-pins {
- pins = "gpio43";
- function = "qup3";
- };
-
- qup_uart3_rx: rx-pins {
- pins = "gpio44";
- function = "qup3";
- };
- };
-
- qup_uart3_4pin: qup-uart3-4pin-state {
- qup_uart3_4pin_cts: cts-pins {
- pins = "gpio41";
- function = "qup3";
- };
-
- qup_uart3_4pin_rts_tx: rts-tx-pins {
- pins = "gpio42", "gpio43";
- function = "qup3";
- };
-
- qup_uart3_4pin_rx: rx-pins {
- pins = "gpio44";
- function = "qup3";
- };
- };
-
- qup_uart4_default: qup-uart4-default-state {
- qup_uart4_tx: tx-pins {
- pins = "gpio91";
- function = "qup4";
- };
-
- qup_uart4_rx: rx-pins {
- pins = "gpio92";
- function = "qup4";
- };
- };
-
- qup_uart5_default: qup-uart5-default-state {
- qup_uart5_tx: tx-pins {
- pins = "gpio87";
- function = "qup5";
- };
-
- qup_uart5_rx: rx-pins {
- pins = "gpio88";
- function = "qup5";
- };
- };
-
- qup_uart6_default: qup-uart6-default-state {
- qup_uart6_tx: tx-pins {
- pins = "gpio47";
- function = "qup6";
- };
-
- qup_uart6_rx: rx-pins {
- pins = "gpio48";
- function = "qup6";
- };
- };
-
- qup_uart6_4pin: qup-uart6-4pin-state {
- qup_uart6_4pin_cts: cts-pins {
- pins = "gpio45";
- function = "qup6";
- bias-pull-down;
- };
-
- qup_uart6_4pin_rts_tx: rts-tx-pins {
- pins = "gpio46", "gpio47";
- function = "qup6";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_uart6_4pin_rx: rx-pins {
- pins = "gpio48";
- function = "qup6";
- bias-pull-up;
- };
- };
-
- qup_uart7_default: qup-uart7-default-state {
- qup_uart7_tx: tx-pins {
- pins = "gpio95";
- function = "qup7";
- };
-
- qup_uart7_rx: rx-pins {
- pins = "gpio96";
- function = "qup7";
- };
- };
-
- qup_uart8_default: qup-uart8-default-state {
- qup_uart8_tx: tx-pins {
- pins = "gpio67";
- function = "qup8";
- };
-
- qup_uart8_rx: rx-pins {
- pins = "gpio68";
- function = "qup8";
- };
- };
-
- qup_uart9_default: qup-uart9-default-state {
- qup_uart9_tx: tx-pins {
- pins = "gpio4";
- function = "qup9";
- };
-
- qup_uart9_rx: rx-pins {
- pins = "gpio5";
- function = "qup9";
- };
- };
-
- qup_uart10_default: qup-uart10-default-state {
- qup_uart10_tx: tx-pins {
- pins = "gpio53";
- function = "qup10";
- };
-
- qup_uart10_rx: rx-pins {
- pins = "gpio54";
- function = "qup10";
- };
- };
-
- qup_uart11_default: qup-uart11-default-state {
- qup_uart11_tx: tx-pins {
- pins = "gpio33";
- function = "qup11";
- };
-
- qup_uart11_rx: rx-pins {
- pins = "gpio34";
- function = "qup11";
- };
- };
-
- qup_uart12_default: qup-uart12-default-state {
- qup_uart12_tx: tx-pins {
- pins = "gpio51";
- function = "qup0";
- };
-
- qup_uart12_rx: rx-pins {
- pins = "gpio52";
- function = "qup0";
- };
- };
-
- qup_uart13_default: qup-uart13-default-state {
- qup_uart13_tx: tx-pins {
- pins = "gpio107";
- function = "qup13";
- };
-
- qup_uart13_rx: rx-pins {
- pins = "gpio108";
- function = "qup13";
- };
- };
-
- qup_uart14_default: qup-uart14-default-state {
- qup_uart14_tx: tx-pins {
- pins = "gpio31";
- function = "qup14";
- };
-
- qup_uart14_rx: rx-pins {
- pins = "gpio32";
- function = "qup14";
- };
- };
-
- qup_uart15_default: qup-uart15-default-state {
- qup_uart15_tx: tx-pins {
- pins = "gpio83";
- function = "qup15";
- };
-
- qup_uart15_rx: rx-pins {
- pins = "gpio84";
- function = "qup15";
- };
- };
-
- quat_mi2s_sleep: quat-mi2s-sleep-state {
- pins = "gpio58", "gpio59";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- quat_mi2s_active: quat-mi2s-active-state {
- pins = "gpio58", "gpio59";
- function = "qua_mi2s";
- drive-strength = <8>;
- bias-disable;
- output-high;
- };
-
- quat_mi2s_sd0_sleep: quat-mi2s-sd0-sleep-state {
- pins = "gpio60";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- quat_mi2s_sd0_active: quat-mi2s-sd0-active-state {
- pins = "gpio60";
- function = "qua_mi2s";
- drive-strength = <8>;
- bias-disable;
- };
-
- quat_mi2s_sd1_sleep: quat-mi2s-sd1-sleep-state {
- pins = "gpio61";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- quat_mi2s_sd1_active: quat-mi2s-sd1-active-state {
- pins = "gpio61";
- function = "qua_mi2s";
- drive-strength = <8>;
- bias-disable;
- };
-
- quat_mi2s_sd2_sleep: quat-mi2s-sd2-sleep-state {
- pins = "gpio62";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- quat_mi2s_sd2_active: quat-mi2s-sd2-active-state {
- pins = "gpio62";
- function = "qua_mi2s";
- drive-strength = <8>;
- bias-disable;
- };
-
- quat_mi2s_sd3_sleep: quat-mi2s-sd3-sleep-state {
- pins = "gpio63";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- quat_mi2s_sd3_active: quat-mi2s-sd3-active-state {
- pins = "gpio63";
- function = "qua_mi2s";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- mss_pil: remoteproc@4080000 {
- compatible = "qcom,sdm845-mss-pil";
- reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
- reg-names = "qdsp6", "rmb";
-
- interrupts-extended =
- <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack",
- "shutdown-ack";
-
- clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
- <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
- <&gcc GCC_BOOT_ROM_AHB_CLK>,
- <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
- <&gcc GCC_MSS_SNOC_AXI_CLK>,
- <&gcc GCC_MSS_MFAB_AXIS_CLK>,
- <&gcc GCC_PRNG_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "bus", "mem", "gpll0_mss",
- "snoc_axi", "mnoc_axi", "prng", "xo";
-
- qcom,qmp = <&aoss_qmp>;
-
- qcom,smem-states = <&modem_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
- <&pdc_reset PDC_MODEM_SYNC_RESET>;
- reset-names = "mss_restart", "pdc_reset";
-
- qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
-
- power-domains = <&rpmhpd SDM845_CX>,
- <&rpmhpd SDM845_MX>,
- <&rpmhpd SDM845_MSS>;
- power-domain-names = "cx", "mx", "mss";
-
- status = "disabled";
-
- mba {
- memory-region = <&mba_region>;
- };
-
- mpss {
- memory-region = <&mpss_region>;
- };
-
- metadata {
- memory-region = <&mdata_mem>;
- };
-
- glink-edge {
- interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
- label = "modem";
- qcom,remote-pid = <1>;
- mboxes = <&apss_shared 12>;
- };
- };
-
- gpucc: clock-controller@5090000 {
- compatible = "qcom,sdm845-gpucc";
- reg = <0 0x05090000 0 0x9000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_GPU_GPLL0_CLK_SRC>,
- <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
- clock-names = "bi_tcxo",
- "gcc_gpu_gpll0_clk_src",
- "gcc_gpu_gpll0_div_clk_src";
- };
-
- slpi_pas: remoteproc@5c00000 {
- compatible = "qcom,sdm845-slpi-pas";
- reg = <0 0x5c00000 0 0x4000>;
-
- interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
- <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- qcom,qmp = <&aoss_qmp>;
-
- power-domains = <&rpmhpd SDM845_CX>,
- <&rpmhpd SDM845_MX>;
- power-domain-names = "lcx", "lmx";
-
- memory-region = <&slpi_mem>;
-
- qcom,smem-states = <&slpi_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
- label = "dsps";
- qcom,remote-pid = <3>;
- mboxes = <&apss_shared 24>;
-
- fastrpc {
- compatible = "qcom,fastrpc";
- qcom,glink-channels = "fastrpcglink-apps-dsp";
- label = "sdsp";
- qcom,non-secure-domain;
- qcom,vmids = <QCOM_SCM_VMID_HLOS QCOM_SCM_VMID_MSS_MSA
- QCOM_SCM_VMID_SSC_Q6 QCOM_SCM_VMID_ADSP_Q6>;
- memory-region = <&fastrpc_mem>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- compute-cb@0 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <0>;
- };
- };
- };
- };
-
- stm@6002000 {
- compatible = "arm,coresight-stm", "arm,primecell";
- reg = <0 0x06002000 0 0x1000>,
- <0 0x16280000 0 0x180000>;
- reg-names = "stm-base", "stm-stimulus-base";
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
-
- out-ports {
- port {
- stm_out: endpoint {
- remote-endpoint =
- <&funnel0_in7>;
- };
- };
- };
- };
-
- funnel@6041000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0 0x06041000 0 0x1000>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
-
- out-ports {
- port {
- funnel0_out: endpoint {
- remote-endpoint =
- <&merge_funnel_in0>;
- };
- };
- };
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@7 {
- reg = <7>;
- funnel0_in7: endpoint {
- remote-endpoint = <&stm_out>;
- };
- };
- };
- };
-
- funnel@6043000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0 0x06043000 0 0x1000>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
-
- out-ports {
- port {
- funnel2_out: endpoint {
- remote-endpoint =
- <&merge_funnel_in2>;
- };
- };
- };
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@5 {
- reg = <5>;
- funnel2_in5: endpoint {
- remote-endpoint =
- <&apss_merge_funnel_out>;
- };
- };
- };
- };
-
- funnel@6045000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0 0x06045000 0 0x1000>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
-
- out-ports {
- port {
- merge_funnel_out: endpoint {
- remote-endpoint = <&etf_in>;
- };
- };
- };
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- merge_funnel_in0: endpoint {
- remote-endpoint =
- <&funnel0_out>;
- };
- };
-
- port@2 {
- reg = <2>;
- merge_funnel_in2: endpoint {
- remote-endpoint =
- <&funnel2_out>;
- };
- };
- };
- };
-
- replicator@6046000 {
- compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
- reg = <0 0x06046000 0 0x1000>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
-
- out-ports {
- port {
- replicator_out: endpoint {
- remote-endpoint = <&etr_in>;
- };
- };
- };
-
- in-ports {
- port {
- replicator_in: endpoint {
- remote-endpoint = <&etf_out>;
- };
- };
- };
- };
-
- etf@6047000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0 0x06047000 0 0x1000>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
-
- out-ports {
- port {
- etf_out: endpoint {
- remote-endpoint =
- <&replicator_in>;
- };
- };
- };
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
- etf_in: endpoint {
- remote-endpoint =
- <&merge_funnel_out>;
- };
- };
- };
- };
-
- etr@6048000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0 0x06048000 0 0x1000>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
- arm,scatter-gather;
-
- in-ports {
- port {
- etr_in: endpoint {
- remote-endpoint =
- <&replicator_out>;
- };
- };
- };
- };
-
- etm@7040000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0 0x07040000 0 0x1000>;
-
- cpu = <&CPU0>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
- arm,coresight-loses-context-with-cpu;
-
- out-ports {
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&apss_funnel_in0>;
- };
- };
- };
- };
-
- etm@7140000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0 0x07140000 0 0x1000>;
-
- cpu = <&CPU1>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
- arm,coresight-loses-context-with-cpu;
-
- out-ports {
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&apss_funnel_in1>;
- };
- };
- };
- };
-
- etm@7240000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0 0x07240000 0 0x1000>;
-
- cpu = <&CPU2>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
- arm,coresight-loses-context-with-cpu;
-
- out-ports {
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&apss_funnel_in2>;
- };
- };
- };
- };
-
- etm@7340000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0 0x07340000 0 0x1000>;
-
- cpu = <&CPU3>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
- arm,coresight-loses-context-with-cpu;
-
- out-ports {
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&apss_funnel_in3>;
- };
- };
- };
- };
-
- etm@7440000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0 0x07440000 0 0x1000>;
-
- cpu = <&CPU4>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
- arm,coresight-loses-context-with-cpu;
-
- out-ports {
- port {
- etm4_out: endpoint {
- remote-endpoint =
- <&apss_funnel_in4>;
- };
- };
- };
- };
-
- etm@7540000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0 0x07540000 0 0x1000>;
-
- cpu = <&CPU5>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
- arm,coresight-loses-context-with-cpu;
-
- out-ports {
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&apss_funnel_in5>;
- };
- };
- };
- };
-
- etm@7640000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0 0x07640000 0 0x1000>;
-
- cpu = <&CPU6>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
- arm,coresight-loses-context-with-cpu;
-
- out-ports {
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&apss_funnel_in6>;
- };
- };
- };
- };
-
- etm@7740000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0 0x07740000 0 0x1000>;
-
- cpu = <&CPU7>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
- arm,coresight-loses-context-with-cpu;
-
- out-ports {
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&apss_funnel_in7>;
- };
- };
- };
- };
-
- funnel@7800000 { /* APSS Funnel */
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0 0x07800000 0 0x1000>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
-
- out-ports {
- port {
- apss_funnel_out: endpoint {
- remote-endpoint =
- <&apss_merge_funnel_in>;
- };
- };
- };
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- apss_funnel_in0: endpoint {
- remote-endpoint =
- <&etm0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- apss_funnel_in1: endpoint {
- remote-endpoint =
- <&etm1_out>;
- };
- };
-
- port@2 {
- reg = <2>;
- apss_funnel_in2: endpoint {
- remote-endpoint =
- <&etm2_out>;
- };
- };
-
- port@3 {
- reg = <3>;
- apss_funnel_in3: endpoint {
- remote-endpoint =
- <&etm3_out>;
- };
- };
-
- port@4 {
- reg = <4>;
- apss_funnel_in4: endpoint {
- remote-endpoint =
- <&etm4_out>;
- };
- };
-
- port@5 {
- reg = <5>;
- apss_funnel_in5: endpoint {
- remote-endpoint =
- <&etm5_out>;
- };
- };
-
- port@6 {
- reg = <6>;
- apss_funnel_in6: endpoint {
- remote-endpoint =
- <&etm6_out>;
- };
- };
-
- port@7 {
- reg = <7>;
- apss_funnel_in7: endpoint {
- remote-endpoint =
- <&etm7_out>;
- };
- };
- };
- };
-
- funnel@7810000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0 0x07810000 0 0x1000>;
-
- clocks = <&aoss_qmp>;
- clock-names = "apb_pclk";
-
- out-ports {
- port {
- apss_merge_funnel_out: endpoint {
- remote-endpoint =
- <&funnel2_in5>;
- };
- };
- };
-
- in-ports {
- port {
- apss_merge_funnel_in: endpoint {
- remote-endpoint =
- <&apss_funnel_out>;
- };
- };
- };
- };
-
- sdhc_2: mmc@8804000 {
- compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5";
- reg = <0 0x08804000 0 0x1000>;
-
- interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "core", "xo";
- iommus = <&apps_smmu 0xa0 0xf>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&sdhc2_opp_table>;
-
- status = "disabled";
-
- sdhc2_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-9600000 {
- opp-hz = /bits/ 64 <9600000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-201500000 {
- opp-hz = /bits/ 64 <201500000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
- };
- };
-
- qspi: spi@88df000 {
- compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
- reg = <0 0x088df000 0 0x600>;
- iommus = <&apps_smmu 0x160 0x0>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
- <&gcc GCC_QSPI_CORE_CLK>;
- clock-names = "iface", "core";
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&qspi_opp_table>;
- status = "disabled";
- };
-
- slim: slim-ngd@171c0000 {
- compatible = "qcom,slim-ngd-v2.1.0";
- reg = <0 0x171c0000 0 0x2c000>;
- interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-
- dmas = <&slimbam 3>, <&slimbam 4>;
- dma-names = "rx", "tx";
-
- iommus = <&apps_smmu 0x1806 0x0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- lmh_cluster1: lmh@17d70800 {
- compatible = "qcom,sdm845-lmh";
- reg = <0 0x17d70800 0 0x400>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- cpus = <&CPU4>;
- qcom,lmh-temp-arm-millicelsius = <65000>;
- qcom,lmh-temp-low-millicelsius = <94500>;
- qcom,lmh-temp-high-millicelsius = <95000>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- lmh_cluster0: lmh@17d78800 {
- compatible = "qcom,sdm845-lmh";
- reg = <0 0x17d78800 0 0x400>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- cpus = <&CPU0>;
- qcom,lmh-temp-arm-millicelsius = <65000>;
- qcom,lmh-temp-low-millicelsius = <94500>;
- qcom,lmh-temp-high-millicelsius = <95000>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- usb_1_hsphy: phy@88e2000 {
- compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
- reg = <0 0x088e2000 0 0x400>;
- status = "disabled";
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "cfg_ahb", "ref";
-
- resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-
- nvmem-cells = <&qusb2p_hstx_trim>;
- };
-
- usb_2_hsphy: phy@88e3000 {
- compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
- reg = <0 0x088e3000 0 0x400>;
- status = "disabled";
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "cfg_ahb", "ref";
-
- resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
-
- nvmem-cells = <&qusb2s_hstx_trim>;
- };
-
- usb_1_qmpphy: phy@88e8000 {
- compatible = "qcom,sdm845-qmp-usb3-dp-phy";
- reg = <0 0x088e8000 0 0x3000>;
- status = "disabled";
-
- clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
- clock-names = "aux",
- "ref",
- "com_aux",
- "usb3_pipe",
- "cfg_ahb";
-
- resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
- <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
- reset-names = "phy", "common";
-
- #clock-cells = <1>;
- #phy-cells = <1>;
- };
-
- usb_2_qmpphy: phy@88eb000 {
- compatible = "qcom,sdm845-qmp-usb3-uni-phy";
- reg = <0 0x088eb000 0 0x18c>;
- status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_SEC_CLKREF_CLK>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
- resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
- <&gcc GCC_USB3_PHY_SEC_BCR>;
- reset-names = "phy", "common";
-
- usb_2_ssphy: phy@88eb200 {
- reg = <0 0x088eb200 0 0x128>,
- <0 0x088eb400 0 0x1fc>,
- <0 0x088eb800 0 0x218>,
- <0 0x088eb600 0 0x70>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
- };
-
- usb_1: usb@a6f8800 {
- compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
- reg = <0 0x0a6f8800 0 0x400>;
- status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- dma-ranges;
-
- clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_MASTER_CLK>,
- <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
- <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
- clock-names = "cfg_noc",
- "core",
- "iface",
- "sleep",
- "mock_utmi";
-
- assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_PRIM_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <150000000>;
-
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
-
- power-domains = <&gcc USB30_PRIM_GDSC>;
-
- resets = <&gcc GCC_USB30_PRIM_BCR>;
-
- interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
- interconnect-names = "usb-ddr", "apps-usb";
-
- usb_1_dwc3: usb@a600000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a600000 0 0xcd00>;
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x740 0>;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
- phy-names = "usb2-phy", "usb3-phy";
- };
- };
-
- usb_2: usb@a8f8800 {
- compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
- reg = <0 0x0a8f8800 0 0x400>;
- status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- dma-ranges;
-
- clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
- <&gcc GCC_USB30_SEC_MASTER_CLK>,
- <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
- <&gcc GCC_USB30_SEC_SLEEP_CLK>,
- <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
- clock-names = "cfg_noc",
- "core",
- "iface",
- "sleep",
- "mock_utmi";
-
- assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_SEC_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <150000000>;
-
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
-
- power-domains = <&gcc USB30_SEC_GDSC>;
-
- resets = <&gcc GCC_USB30_SEC_BCR>;
-
- interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
- interconnect-names = "usb-ddr", "apps-usb";
-
- usb_2_dwc3: usb@a800000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a800000 0 0xcd00>;
- interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x760 0>;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
- phy-names = "usb2-phy", "usb3-phy";
- };
- };
-
- venus: video-codec@aa00000 {
- compatible = "qcom,sdm845-venus-v2";
- reg = <0 0x0aa00000 0 0xff000>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&videocc VENUS_GDSC>,
- <&videocc VCODEC0_GDSC>,
- <&videocc VCODEC1_GDSC>,
- <&rpmhpd SDM845_CX>;
- power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
- operating-points-v2 = <&venus_opp_table>;
- clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
- <&videocc VIDEO_CC_VENUS_AHB_CLK>,
- <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
- <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
- <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
- <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
- <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
- clock-names = "core", "iface", "bus",
- "vcodec0_core", "vcodec0_bus",
- "vcodec1_core", "vcodec1_bus";
- iommus = <&apps_smmu 0x10a0 0x8>,
- <&apps_smmu 0x10b0 0x0>;
- memory-region = <&venus_mem>;
- interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>,
- <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
- interconnect-names = "video-mem", "cpu-cfg";
-
- status = "disabled";
-
- video-core0 {
- compatible = "venus-decoder";
- };
-
- video-core1 {
- compatible = "venus-encoder";
- };
-
- venus_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-320000000 {
- opp-hz = /bits/ 64 <320000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-380000000 {
- opp-hz = /bits/ 64 <380000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
-
- opp-444000000 {
- opp-hz = /bits/ 64 <444000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
-
- opp-533000097 {
- opp-hz = /bits/ 64 <533000097>;
- required-opps = <&rpmhpd_opp_turbo>;
- };
- };
- };
-
- videocc: clock-controller@ab00000 {
- compatible = "qcom,sdm845-videocc";
- reg = <0 0x0ab00000 0 0x10000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "bi_tcxo";
- #clock-cells = <1>;
- #power-domain-cells = <1>;
- #reset-cells = <1>;
- };
-
- camss: camss@acb3000 {
- compatible = "qcom,sdm845-camss";
-
- reg = <0 0x0acb3000 0 0x1000>,
- <0 0x0acba000 0 0x1000>,
- <0 0x0acc8000 0 0x1000>,
- <0 0x0ac65000 0 0x1000>,
- <0 0x0ac66000 0 0x1000>,
- <0 0x0ac67000 0 0x1000>,
- <0 0x0ac68000 0 0x1000>,
- <0 0x0acaf000 0 0x4000>,
- <0 0x0acb6000 0 0x4000>,
- <0 0x0acc4000 0 0x4000>;
- reg-names = "csid0",
- "csid1",
- "csid2",
- "csiphy0",
- "csiphy1",
- "csiphy2",
- "csiphy3",
- "vfe0",
- "vfe1",
- "vfe_lite";
-
- interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "csid0",
- "csid1",
- "csid2",
- "csiphy0",
- "csiphy1",
- "csiphy2",
- "csiphy3",
- "vfe0",
- "vfe1",
- "vfe_lite";
-
- power-domains = <&clock_camcc IFE_0_GDSC>,
- <&clock_camcc IFE_1_GDSC>,
- <&clock_camcc TITAN_TOP_GDSC>;
-
- clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
- <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
- <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
- <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
- <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
- <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
- <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
- <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
- <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
- <&clock_camcc CAM_CC_CSIPHY0_CLK>,
- <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
- <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
- <&clock_camcc CAM_CC_CSIPHY1_CLK>,
- <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
- <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
- <&clock_camcc CAM_CC_CSIPHY2_CLK>,
- <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
- <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
- <&clock_camcc CAM_CC_CSIPHY3_CLK>,
- <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
- <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
- <&gcc GCC_CAMERA_AHB_CLK>,
- <&gcc GCC_CAMERA_AXI_CLK>,
- <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
- <&clock_camcc CAM_CC_SOC_AHB_CLK>,
- <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
- <&clock_camcc CAM_CC_IFE_0_CLK>,
- <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
- <&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
- <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
- <&clock_camcc CAM_CC_IFE_1_CLK>,
- <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
- <&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
- <&clock_camcc CAM_CC_IFE_LITE_CLK>,
- <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
- <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
- clock-names = "camnoc_axi",
- "cpas_ahb",
- "cphy_rx_src",
- "csi0",
- "csi0_src",
- "csi1",
- "csi1_src",
- "csi2",
- "csi2_src",
- "csiphy0",
- "csiphy0_timer",
- "csiphy0_timer_src",
- "csiphy1",
- "csiphy1_timer",
- "csiphy1_timer_src",
- "csiphy2",
- "csiphy2_timer",
- "csiphy2_timer_src",
- "csiphy3",
- "csiphy3_timer",
- "csiphy3_timer_src",
- "gcc_camera_ahb",
- "gcc_camera_axi",
- "slow_ahb_src",
- "soc_ahb",
- "vfe0_axi",
- "vfe0",
- "vfe0_cphy_rx",
- "vfe0_src",
- "vfe1_axi",
- "vfe1",
- "vfe1_cphy_rx",
- "vfe1_src",
- "vfe_lite",
- "vfe_lite_cphy_rx",
- "vfe_lite_src";
-
- iommus = <&apps_smmu 0x0808 0x0>,
- <&apps_smmu 0x0810 0x8>,
- <&apps_smmu 0x0c08 0x0>,
- <&apps_smmu 0x0c10 0x8>;
-
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- };
-
- port@1 {
- reg = <1>;
- };
-
- port@2 {
- reg = <2>;
- };
-
- port@3 {
- reg = <3>;
- };
- };
- };
-
- cci: cci@ac4a000 {
- compatible = "qcom,sdm845-cci", "qcom,msm8996-cci";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg = <0 0x0ac4a000 0 0x4000>;
- interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
- power-domains = <&clock_camcc TITAN_TOP_GDSC>;
-
- clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
- <&clock_camcc CAM_CC_SOC_AHB_CLK>,
- <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
- <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
- <&clock_camcc CAM_CC_CCI_CLK>,
- <&clock_camcc CAM_CC_CCI_CLK_SRC>;
- clock-names = "camnoc_axi",
- "soc_ahb",
- "slow_ahb_src",
- "cpas_ahb",
- "cci",
- "cci_src";
-
- assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
- <&clock_camcc CAM_CC_CCI_CLK>;
- assigned-clock-rates = <80000000>, <37500000>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cci0_default &cci1_default>;
- pinctrl-1 = <&cci0_sleep &cci1_sleep>;
-
- status = "disabled";
-
- cci_i2c0: i2c-bus@0 {
- reg = <0>;
- clock-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cci_i2c1: i2c-bus@1 {
- reg = <1>;
- clock-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- clock_camcc: clock-controller@ad00000 {
- compatible = "qcom,sdm845-camcc";
- reg = <0 0x0ad00000 0 0x10000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "bi_tcxo";
- };
-
- mdss: display-subsystem@ae00000 {
- compatible = "qcom,sdm845-mdss";
- reg = <0 0x0ae00000 0 0x1000>;
- reg-names = "mdss";
-
- power-domains = <&dispcc MDSS_GDSC>;
-
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>;
- clock-names = "iface", "core";
-
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>,
- <&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "mdp0-mem", "mdp1-mem";
-
- iommus = <&apps_smmu 0x880 0x8>,
- <&apps_smmu 0xc80 0x8>;
-
- status = "disabled";
-
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- mdss_mdp: display-controller@ae01000 {
- compatible = "qcom,sdm845-dpu";
- reg = <0 0x0ae01000 0 0x8f000>,
- <0 0x0aeb0000 0 0x2008>;
- reg-names = "mdp", "vbif";
-
- clocks = <&gcc GCC_DISP_AXI_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_AXI_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
-
- assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- assigned-clock-rates = <19200000>;
- operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd SDM845_CX>;
-
- interrupt-parent = <&mdss>;
- interrupts = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- dpu_intf0_out: endpoint {
- remote-endpoint = <&dp_in>;
- };
- };
-
- port@1 {
- reg = <1>;
- dpu_intf1_out: endpoint {
- remote-endpoint = <&mdss_dsi0_in>;
- };
- };
-
- port@2 {
- reg = <2>;
- dpu_intf2_out: endpoint {
- remote-endpoint = <&mdss_dsi1_in>;
- };
- };
- };
-
- mdp_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-19200000 {
- opp-hz = /bits/ 64 <19200000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-171428571 {
- opp-hz = /bits/ 64 <171428571>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-344000000 {
- opp-hz = /bits/ 64 <344000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
-
- opp-430000000 {
- opp-hz = /bits/ 64 <430000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
- };
-
- mdss_dp: displayport-controller@ae90000 {
- status = "disabled";
- compatible = "qcom,sdm845-dp";
-
- reg = <0 0x0ae90000 0 0x200>,
- <0 0x0ae90200 0 0x200>,
- <0 0x0ae90400 0 0x600>,
- <0 0x0ae90a00 0 0x600>,
- <0 0x0ae91000 0 0x600>;
-
- interrupt-parent = <&mdss>;
- interrupts = <12>;
-
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
- <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
- <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
- clock-names = "core_iface", "core_aux", "ctrl_link",
- "ctrl_link_iface", "stream_pixel";
- assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
- assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
- <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
- phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
- phy-names = "dp";
-
- operating-points-v2 = <&dp_opp_table>;
- power-domains = <&rpmhpd SDM845_CX>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- dp_in: endpoint {
- remote-endpoint = <&dpu_intf0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- dp_out: endpoint { };
- };
- };
-
- dp_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-162000000 {
- opp-hz = /bits/ 64 <162000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-270000000 {
- opp-hz = /bits/ 64 <270000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-540000000 {
- opp-hz = /bits/ 64 <540000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
-
- opp-810000000 {
- opp-hz = /bits/ 64 <810000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
- };
-
- mdss_dsi0: dsi@ae94000 {
- compatible = "qcom,sdm845-dsi-ctrl",
- "qcom,mdss-dsi-ctrl";
- reg = <0 0x0ae94000 0 0x400>;
- reg-names = "dsi_ctrl";
-
- interrupt-parent = <&mdss>;
- interrupts = <4>;
-
- clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
- <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
- <&dispcc DISP_CC_MDSS_ESC0_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_AXI_CLK>;
- clock-names = "byte",
- "byte_intf",
- "pixel",
- "core",
- "iface",
- "bus";
- assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
-
- operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SDM845_CX>;
-
- phys = <&mdss_dsi0_phy>;
-
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdss_dsi0_in: endpoint {
- remote-endpoint = <&dpu_intf1_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- mdss_dsi0_out: endpoint {
- };
- };
- };
- };
-
- mdss_dsi0_phy: phy@ae94400 {
- compatible = "qcom,dsi-phy-10nm";
- reg = <0 0x0ae94400 0 0x200>,
- <0 0x0ae94600 0 0x280>,
- <0 0x0ae94a00 0 0x1e0>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
-
- status = "disabled";
- };
-
- mdss_dsi1: dsi@ae96000 {
- compatible = "qcom,sdm845-dsi-ctrl",
- "qcom,mdss-dsi-ctrl";
- reg = <0 0x0ae96000 0 0x400>;
- reg-names = "dsi_ctrl";
-
- interrupt-parent = <&mdss>;
- interrupts = <5>;
-
- clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
- <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
- <&dispcc DISP_CC_MDSS_ESC1_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_AXI_CLK>;
- clock-names = "byte",
- "byte_intf",
- "pixel",
- "core",
- "iface",
- "bus";
- assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
-
- operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SDM845_CX>;
-
- phys = <&mdss_dsi1_phy>;
-
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdss_dsi1_in: endpoint {
- remote-endpoint = <&dpu_intf2_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- mdss_dsi1_out: endpoint {
- };
- };
- };
- };
-
- mdss_dsi1_phy: phy@ae96400 {
- compatible = "qcom,dsi-phy-10nm";
- reg = <0 0x0ae96400 0 0x200>,
- <0 0x0ae96600 0 0x280>,
- <0 0x0ae96a00 0 0x10e>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
-
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
-
- status = "disabled";
- };
- };
-
- gpu: gpu@5000000 {
- compatible = "qcom,adreno-630.2", "qcom,adreno";
-
- reg = <0 0x05000000 0 0x40000>, <0 0x509e000 0 0x10>;
- reg-names = "kgsl_3d0_reg_memory", "cx_mem";
-
- /*
- * Look ma, no clocks! The GPU clocks and power are
- * controlled entirely by the GMU
- */
-
- interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-
- iommus = <&adreno_smmu 0>;
-
- operating-points-v2 = <&gpu_opp_table>;
-
- qcom,gmu = <&gmu>;
-
- interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>;
- interconnect-names = "gfx-mem";
-
- status = "disabled";
-
- gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-710000000 {
- opp-hz = /bits/ 64 <710000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
- opp-peak-kBps = <7216000>;
- };
-
- opp-675000000 {
- opp-hz = /bits/ 64 <675000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
- opp-peak-kBps = <7216000>;
- };
-
- opp-596000000 {
- opp-hz = /bits/ 64 <596000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
- opp-peak-kBps = <6220000>;
- };
-
- opp-520000000 {
- opp-hz = /bits/ 64 <520000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
- opp-peak-kBps = <6220000>;
- };
-
- opp-414000000 {
- opp-hz = /bits/ 64 <414000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
- opp-peak-kBps = <4068000>;
- };
-
- opp-342000000 {
- opp-hz = /bits/ 64 <342000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
- opp-peak-kBps = <2724000>;
- };
-
- opp-257000000 {
- opp-hz = /bits/ 64 <257000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
- opp-peak-kBps = <1648000>;
- };
- };
- };
-
- adreno_smmu: iommu@5040000 {
- compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
- reg = <0 0x05040000 0 0x10000>;
- #iommu-cells = <1>;
- #global-interrupts = <2>;
- interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
- clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
- <&gcc GCC_GPU_CFG_AHB_CLK>;
- clock-names = "bus", "iface";
-
- power-domains = <&gpucc GPU_CX_GDSC>;
- };
-
- gmu: gmu@506a000 {
- compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
-
- reg = <0 0x0506a000 0 0x30000>,
- <0 0x0b280000 0 0x10000>,
- <0 0x0b480000 0 0x10000>;
- reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
-
- interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hfi", "gmu";
-
- clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
- <&gpucc GPU_CC_CXO_CLK>,
- <&gcc GCC_DDRSS_GPU_AXI_CLK>,
- <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
- clock-names = "gmu", "cxo", "axi", "memnoc";
-
- power-domains = <&gpucc GPU_CX_GDSC>,
- <&gpucc GPU_GX_GDSC>;
- power-domain-names = "cx", "gx";
-
- iommus = <&adreno_smmu 5>;
-
- operating-points-v2 = <&gmu_opp_table>;
-
- status = "disabled";
-
- gmu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
- };
-
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
- };
- };
- };
-
- dispcc: clock-controller@af00000 {
- compatible = "qcom,sdm845-dispcc";
- reg = <0 0x0af00000 0 0x10000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_DISP_GPLL0_CLK_SRC>,
- <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
- <&mdss_dsi0_phy 0>,
- <&mdss_dsi0_phy 1>,
- <&mdss_dsi1_phy 0>,
- <&mdss_dsi1_phy 1>,
- <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
- <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
- clock-names = "bi_tcxo",
- "gcc_disp_gpll0_clk_src",
- "gcc_disp_gpll0_div_clk_src",
- "dsi0_phy_pll_out_byteclk",
- "dsi0_phy_pll_out_dsiclk",
- "dsi1_phy_pll_out_byteclk",
- "dsi1_phy_pll_out_dsiclk",
- "dp_link_clk_divsel_ten",
- "dp_vco_divided_clk_src_mux";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
-
- pdc_intc: interrupt-controller@b220000 {
- compatible = "qcom,sdm845-pdc", "qcom,pdc";
- reg = <0 0x0b220000 0 0x30000>;
- qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
- #interrupt-cells = <2>;
- interrupt-parent = <&intc>;
- interrupt-controller;
- };
-
- pdc_reset: reset-controller@b2e0000 {
- compatible = "qcom,sdm845-pdc-global";
- reg = <0 0x0b2e0000 0 0x20000>;
- #reset-cells = <1>;
- };
-
- tsens0: thermal-sensor@c263000 {
- compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
- reg = <0 0x0c263000 0 0x1ff>, /* TM */
- <0 0x0c222000 0 0x1ff>; /* SROT */
- #qcom,sensors = <13>;
- interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow", "critical";
- #thermal-sensor-cells = <1>;
- };
-
- tsens1: thermal-sensor@c265000 {
- compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
- reg = <0 0x0c265000 0 0x1ff>, /* TM */
- <0 0x0c223000 0 0x1ff>; /* SROT */
- #qcom,sensors = <8>;
- interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow", "critical";
- #thermal-sensor-cells = <1>;
- };
-
- aoss_reset: reset-controller@c2a0000 {
- compatible = "qcom,sdm845-aoss-cc";
- reg = <0 0x0c2a0000 0 0x31000>;
- #reset-cells = <1>;
- };
-
- aoss_qmp: power-management@c300000 {
- compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
- reg = <0 0x0c300000 0 0x400>;
- interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
- mboxes = <&apss_shared 0>;
-
- #clock-cells = <0>;
-
- cx_cdev: cx {
- #cooling-cells = <2>;
- };
-
- ebi_cdev: ebi {
- #cooling-cells = <2>;
- };
- };
-
- sram@c3f0000 {
- compatible = "qcom,sdm845-rpmh-stats";
- reg = <0 0x0c3f0000 0 0x400>;
- };
-
- spmi_bus: spmi@c440000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0 0x0c440000 0 0x1100>,
- <0 0x0c600000 0 0x2000000>,
- <0 0x0e600000 0 0x100000>,
- <0 0x0e700000 0 0xa0000>,
- <0 0x0c40a000 0 0x26000>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- sram@146bf000 {
- compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
- reg = <0 0x146bf000 0 0x1000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- ranges = <0 0 0x146bf000 0x1000>;
-
- pil-reloc@94c {
- compatible = "qcom,pil-reloc-info";
- reg = <0x94c 0xc8>;
- };
- };
-
- apps_smmu: iommu@15000000 {
- compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
- reg = <0 0x15000000 0 0x80000>;
- #iommu-cells = <2>;
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- lpasscc: clock-controller@17014000 {
- compatible = "qcom,sdm845-lpasscc";
- reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>;
- reg-names = "cc", "qdsp6ss";
- #clock-cells = <1>;
- status = "disabled";
- };
-
- gladiator_noc: interconnect@17900000 {
- compatible = "qcom,sdm845-gladiator-noc";
- reg = <0 0x17900000 0 0xd080>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
- watchdog@17980000 {
- compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
- reg = <0 0x17980000 0 0x1000>;
- clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- apss_shared: mailbox@17990000 {
- compatible = "qcom,sdm845-apss-shared";
- reg = <0 0x17990000 0 0x1000>;
- #mbox-cells = <1>;
- };
-
- apps_rsc: rsc@179c0000 {
- label = "apps_rsc";
- compatible = "qcom,rpmh-rsc";
- reg = <0 0x179c0000 0 0x10000>,
- <0 0x179d0000 0 0x10000>,
- <0 0x179e0000 0 0x10000>;
- reg-names = "drv-0", "drv-1", "drv-2";
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- qcom,tcs-offset = <0xd00>;
- qcom,drv-id = <2>;
- qcom,tcs-config = <ACTIVE_TCS 2>,
- <SLEEP_TCS 3>,
- <WAKE_TCS 3>,
- <CONTROL_TCS 1>;
- power-domains = <&CLUSTER_PD>;
-
- apps_bcm_voter: bcm-voter {
- compatible = "qcom,bcm-voter";
- };
-
- rpmhcc: clock-controller {
- compatible = "qcom,sdm845-rpmh-clk";
- #clock-cells = <1>;
- clock-names = "xo";
- clocks = <&xo_board>;
- };
-
- rpmhpd: power-controller {
- compatible = "qcom,sdm845-rpmhpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmhpd_opp_table>;
-
- rpmhpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmhpd_opp_ret: opp1 {
- opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
- };
-
- rpmhpd_opp_min_svs: opp2 {
- opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
- };
-
- rpmhpd_opp_low_svs: opp3 {
- opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
- };
-
- rpmhpd_opp_svs: opp4 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
- };
-
- rpmhpd_opp_svs_l1: opp5 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
- };
-
- rpmhpd_opp_nom: opp6 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
- };
-
- rpmhpd_opp_nom_l1: opp7 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
- };
-
- rpmhpd_opp_nom_l2: opp8 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
- };
-
- rpmhpd_opp_turbo: opp9 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
- };
-
- rpmhpd_opp_turbo_l1: opp10 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
- };
- };
- };
- };
-
- intc: interrupt-controller@17a00000 {
- compatible = "arm,gic-v3";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0 0x17a00000 0 0x10000>, /* GICD */
- <0 0x17a60000 0 0x100000>; /* GICR * 8 */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-
- msi-controller@17a40000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- #msi-cells = <1>;
- reg = <0 0x17a40000 0 0x20000>;
- status = "disabled";
- };
- };
-
- slimbam: dma-controller@17184000 {
- compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
- qcom,controlled-remotely;
- reg = <0 0x17184000 0 0x2a000>;
- num-channels = <31>;
- interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- qcom,ee = <1>;
- qcom,num-ees = <2>;
- iommus = <&apps_smmu 0x1806 0x0>;
- };
-
- timer@17c90000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0x20000000>;
- compatible = "arm,armv7-timer-mem";
- reg = <0 0x17c90000 0 0x1000>;
-
- frame@17ca0000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17ca0000 0x1000>,
- <0x17cb0000 0x1000>;
- };
-
- frame@17cc0000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17cc0000 0x1000>;
- status = "disabled";
- };
-
- frame@17cd0000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17cd0000 0x1000>;
- status = "disabled";
- };
-
- frame@17ce0000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17ce0000 0x1000>;
- status = "disabled";
- };
-
- frame@17cf0000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17cf0000 0x1000>;
- status = "disabled";
- };
-
- frame@17d00000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17d00000 0x1000>;
- status = "disabled";
- };
-
- frame@17d10000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17d10000 0x1000>;
- status = "disabled";
- };
- };
-
- osm_l3: interconnect@17d41000 {
- compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
- reg = <0 0x17d41000 0 0x1400>;
-
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
- clock-names = "xo", "alternate";
-
- #interconnect-cells = <1>;
- };
-
- cpufreq_hw: cpufreq@17d43000 {
- compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw";
- reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
- reg-names = "freq-domain0", "freq-domain1";
-
- interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>;
-
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
- clock-names = "xo", "alternate";
-
- #freq-domain-cells = <1>;
- #clock-cells = <1>;
- };
-
- wifi: wifi@18800000 {
- compatible = "qcom,wcn3990-wifi";
- status = "disabled";
- reg = <0 0x18800000 0 0x800000>;
- reg-names = "membase";
- memory-region = <&wlan_msa_mem>;
- clock-names = "cxo_ref_clk_pin";
- clocks = <&rpmhcc RPMH_RF_CLK2>;
- interrupts =
- <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x0040 0x1>;
- };
- };
-
- sound: sound {
- };
-
- thermal-zones {
- cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 1>;
-
- trips {
- cpu0_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu0_alert1: trip-point1 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu0_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
- };
-
- cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 2>;
-
- trips {
- cpu1_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu1_alert1: trip-point1 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu1_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
- };
-
- cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 3>;
-
- trips {
- cpu2_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu2_alert1: trip-point1 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu2_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
- };
-
- cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 4>;
-
- trips {
- cpu3_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu3_alert1: trip-point1 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu3_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
- };
-
- cpu4-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 7>;
-
- trips {
- cpu4_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu4_alert1: trip-point1 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu4_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
- };
-
- cpu5-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 8>;
-
- trips {
- cpu5_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu5_alert1: trip-point1 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu5_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
- };
-
- cpu6-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 9>;
-
- trips {
- cpu6_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu6_alert1: trip-point1 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu6_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
- };
-
- cpu7-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 10>;
-
- trips {
- cpu7_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu7_alert1: trip-point1 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu7_crit: cpu-crit {
- temperature = <110000>;
- hysteresis = <1000>;
- type = "critical";
- };
- };
- };
-
- aoss0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 0>;
-
- trips {
- aoss0_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- cluster0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 5>;
-
- trips {
- cluster0_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- cluster0_crit: cluster0_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cluster1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 6>;
-
- trips {
- cluster1_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- cluster1_crit: cluster1_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- gpu-top-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 11>;
-
- trips {
- gpu1_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- gpu-bottom-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 12>;
-
- trips {
- gpu2_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- aoss1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 0>;
-
- trips {
- aoss1_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- q6-modem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 1>;
-
- trips {
- q6_modem_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- mem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 2>;
-
- trips {
- mem_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- wlan-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 3>;
-
- trips {
- wlan_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- q6-hvx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 4>;
-
- trips {
- q6_hvx_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 5>;
-
- trips {
- camera_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- video-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 6>;
-
- trips {
- video_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- modem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 7>;
-
- trips {
- modem_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
- };
-};
These files are all identical (or older) than those in dts/upstream. Drop them as we now use upstream DTS files with OF_UPSTREAM. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- arch/arm/dts/apq8016-sbc.dts | 729 ---- arch/arm/dts/apq8096-db820c.dts | 1137 ------ arch/arm/dts/msm8916-pm8916.dtsi | 157 - arch/arm/dts/msm8916.dtsi | 2702 ------------- arch/arm/dts/msm8996.dtsi | 3884 ------------------ arch/arm/dts/pm8916.dtsi | 178 - arch/arm/dts/pm8994.dtsi | 152 - arch/arm/dts/pm8998.dtsi | 130 - arch/arm/dts/pmi8994.dtsi | 65 - arch/arm/dts/pmi8998.dtsi | 98 - arch/arm/dts/pms405.dtsi | 149 - arch/arm/dts/qcs404-evb-4000.dts | 96 - arch/arm/dts/qcs404-evb.dtsi | 389 -- arch/arm/dts/qcs404.dtsi | 1829 --------- arch/arm/dts/sdm845-db845c.dts | 1190 ------ arch/arm/dts/sdm845-samsung-starqltechn.dts | 460 --- arch/arm/dts/sdm845-wcd9340.dtsi | 86 - arch/arm/dts/sdm845.dtsi | 5752 --------------------------- 18 files changed, 19183 deletions(-)