diff mbox series

usb: dwc3: Select 2.0 or 3.0 clk base on maximum_speed

Message ID 65003b0cc37c08a0d22996009f548247ad18c00c.1713308949.git.Thinh.Nguyen@synopsys.com
State New
Headers show
Series usb: dwc3: Select 2.0 or 3.0 clk base on maximum_speed | expand

Commit Message

Thinh Nguyen April 16, 2024, 11:11 p.m. UTC 
The dwc->maximum_speed is determined through the device capability and
designer's constraint through device tree binding. If none of them
applies, don't let the default coreConsultant setting in GUCTL1 to limit
the device operating speed.

Normally the default setting will not contradict the device capability
or device tree binding. This scenario was found through our internal
tests, not an actual bug in the wild.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
---
 drivers/usb/dwc3/core.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)


base-commit: 3d122e6d27e417a9fa91181922743df26b2cd679
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 31684cdaaae3..637194af506f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1320,10 +1320,13 @@  static int dwc3_core_init(struct dwc3 *dwc)
 		if (dwc->parkmode_disable_hs_quirk)
 			reg |= DWC3_GUCTL1_PARKMODE_DISABLE_HS;
 
-		if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY) &&
-		    (dwc->maximum_speed == USB_SPEED_HIGH ||
-		     dwc->maximum_speed == USB_SPEED_FULL))
-			reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK;
+		if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY)) {
+			if (dwc->maximum_speed == USB_SPEED_FULL ||
+			    dwc->maximum_speed == USB_SPEED_HIGH)
+				reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK;
+			else
+				reg &= ~DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK;
+		}
 
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}