diff mbox series

[v1,1/2] Revert "Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()"

Message ID 1713449192-25926-2-git-send-email-quic_zijuhu@quicinc.com
State New
Headers show
Series [v1,1/2] Revert "Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()" | expand

Commit Message

quic_zijuhu April 18, 2024, 2:06 p.m. UTC
This reverts commit 56d074d26c5828773b00b2185dd7e1d08273b8e8.

Commit 56d074d26c58 ("Bluetooth: hci_qca: don't use IS_ERR_OR_NULL()
with gpiod_get_optional()") will cause serious regression issue for
several QCA controllers such as QCA_WCN6750,QCA_WCN6855,QCA_ROME,
QCA_QCA6390 and QCA_QCA2066, the regression issue is that BT can't be
enabled any more once BT is disabled if BT reset pin is not configured
by DT or ACPI.

if BT reset pin is not configured, devm_gpiod_get_optional() will return
NULL, and we should NOT set quirk HCI_QUIRK_NON_PERSISTENT_SETUP, but the
reverted commit SET the quirk since NULL is not a error case, and cause
qca_setup() call failure triggered by the 2nd and later BT enable
operations since there are no available BT reset pin to clear BT firmware
downloaded by the 1st enable operation, fixed by reverting the commit.

Fixes: 56d074d26c58 ("Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()")
Reported-by: Wren Turkal <wt@penguintechs.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218726
Link: https://lore.kernel.org/linux-bluetooth/ea20bb9b-6b60-47fc-ae42-5eed918ad7b4@quicinc.com/T/#m73d6a71d2f454bb03588c66f3ef7912274d37c6f
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Tested-by: Wren Turkal <wt@penguintechs.org>
---
 drivers/bluetooth/hci_qca.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 92fa20f5ac7d..160175a23a49 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2323,7 +2323,7 @@  static int qca_serdev_probe(struct serdev_device *serdev)
 
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
-		if (IS_ERR(qcadev->bt_en) &&
+		if (IS_ERR_OR_NULL(qcadev->bt_en) &&
 		    (data->soc_type == QCA_WCN6750 ||
 		     data->soc_type == QCA_WCN6855)) {
 			dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
@@ -2332,7 +2332,7 @@  static int qca_serdev_probe(struct serdev_device *serdev)
 
 		qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
 					       GPIOD_IN);
-		if (IS_ERR(qcadev->sw_ctrl) &&
+		if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
 		    (data->soc_type == QCA_WCN6750 ||
 		     data->soc_type == QCA_WCN6855 ||
 		     data->soc_type == QCA_WCN7850))
@@ -2354,7 +2354,7 @@  static int qca_serdev_probe(struct serdev_device *serdev)
 	default:
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
-		if (IS_ERR(qcadev->bt_en)) {
+		if (IS_ERR_OR_NULL(qcadev->bt_en)) {
 			dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
 			power_ctrl_enabled = false;
 		}