@@ -1480,13 +1480,13 @@ rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
u8 cck[RTL8723A_MAX_RF_PATHS], ofdm[RTL8723A_MAX_RF_PATHS];
u8 ofdmbase[RTL8723A_MAX_RF_PATHS], mcsbase[RTL8723A_MAX_RF_PATHS];
u32 val32, ofdm_a, ofdm_b, mcs_a, mcs_b;
- u8 val8;
+ u8 val8, base;
int group, i;
group = rtl8xxxu_gen1_channel_to_group(channel);
- cck[0] = priv->cck_tx_power_index_A[group] - 1;
- cck[1] = priv->cck_tx_power_index_B[group] - 1;
+ cck[0] = priv->cck_tx_power_index_A[group];
+ cck[1] = priv->cck_tx_power_index_B[group];
if (priv->hi_pa) {
if (cck[0] > 0x20)
@@ -1497,10 +1497,6 @@ rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
ofdm[0] = priv->ht40_1s_tx_power_index_A[group];
ofdm[1] = priv->ht40_1s_tx_power_index_B[group];
- if (ofdm[0])
- ofdm[0] -= 1;
- if (ofdm[1])
- ofdm[1] -= 1;
ofdmbase[0] = ofdm[0] + priv->ofdm_tx_power_index_diff[group].a;
ofdmbase[1] = ofdm[1] + priv->ofdm_tx_power_index_diff[group].b;
@@ -1589,20 +1585,19 @@ rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12,
mcs_a + power_base->reg_0e1c);
+ val8 = u32_get_bits(mcs_a + power_base->reg_0e1c, 0xff000000);
for (i = 0; i < 3; i++) {
- if (i != 2)
- val8 = (mcsbase[0] > 8) ? (mcsbase[0] - 8) : 0;
- else
- val8 = (mcsbase[0] > 6) ? (mcsbase[0] - 6) : 0;
+ base = i != 2 ? 8 : 6;
+ val8 = max_t(int, val8 - base, 0);
rtl8xxxu_write8(priv, REG_OFDM0_XC_TX_IQ_IMBALANCE + i, val8);
}
+
rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12,
mcs_b + power_base->reg_0868);
+ val8 = u32_get_bits(mcs_b + power_base->reg_0868, 0xff000000);
for (i = 0; i < 3; i++) {
- if (i != 2)
- val8 = (mcsbase[1] > 8) ? (mcsbase[1] - 8) : 0;
- else
- val8 = (mcsbase[1] > 6) ? (mcsbase[1] - 6) : 0;
+ base = i != 2 ? 8 : 6;
+ val8 = max_t(int, val8 - base, 0);
rtl8xxxu_write8(priv, REG_OFDM0_XD_TX_IQ_IMBALANCE + i, val8);
}
}
Don't subtract 1 from the power index. This was added in commit 2fc0b8e5a17d ("rtl8xxxu: Add TX power base values for gen1 parts") for unknown reasons. The vendor drivers don't do this. Also correct the calculations of values written to REG_OFDM0_X{C,D}_TX_IQ_IMBALANCE. According to the vendor driver, these are used for TX power training. With these changes rtl8xxxu sets the TX power of RTL8192CU the same as the vendor driver. None of this appears to have any effect on my RTL8192CU device. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> --- v1 was a long time ago: https://lore.kernel.org/linux-wireless/52c28b65-6f28-2cc0-7281-179bb1087c2a@gmail.com/ v2: - Use ternary operator and max_t in the for loops. --- .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 25 ++++++++----------- 1 file changed, 10 insertions(+), 15 deletions(-)