diff mbox series

[v4,2/2] Bluetooth: qca: Fix BT enable failure for QCA_QCA6390 after disable then warm reboot

Message ID 1713650800-29741-3-git-send-email-quic_zijuhu@quicinc.com
State Superseded
Headers show
Series Fix two regression issues for QCA controllers | expand

Commit Message

quic_zijuhu April 20, 2024, 10:06 p.m. UTC 
From: Zijun Hu <zijuhu@qti.qualcomm.com>

Commit 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed
serdev") will cause below regression issue:

BT can't be enabled after below steps:
cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure
if property enable-gpios is not configured within DT|ACPI for QCA_QCA6390.

Fixed by sending the VSC to reset controller within qca_serdev_shutdown()
once BT was ever enabled.

Fixes: 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed serdev")
Reported-by: Wren Turkal <wt@penguintechs.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218726
Signed-off-by: Zijun Hu <zijuhu@qti.qualcomm.com>
Tested-by: Wren Turkal <wt@penguintechs.org>
---
 drivers/bluetooth/hci_qca.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 4079254fb1c8..fc027da98297 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2439,13 +2439,12 @@  static void qca_serdev_shutdown(struct device *dev)
 	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
 	struct hci_uart *hu = &qcadev->serdev_hu;
 	struct hci_dev *hdev = hu->hdev;
-	struct qca_data *qca = hu->priv;
 	const u8 ibs_wake_cmd[] = { 0xFD };
 	const u8 edl_reset_soc_cmd[] = { 0x01, 0x00, 0xFC, 0x01, 0x05 };
 
 	if (qcadev->btsoc_type == QCA_QCA6390) {
-		if (test_bit(QCA_BT_OFF, &qca->flags) ||
-		    !test_bit(HCI_RUNNING, &hdev->flags))
+		if (test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks) ||
+		    hci_dev_test_flag(hdev, HCI_SETUP))
 			return;
 
 		serdev_device_write_flush(serdev);