@@ -36,12 +36,6 @@
#define TEGRA186_GPIO_SCR_SEC_REN BIT(27)
#define TEGRA186_GPIO_SCR_SEC_G1W BIT(9)
#define TEGRA186_GPIO_SCR_SEC_G1R BIT(1)
-#define TEGRA186_GPIO_FULL_ACCESS (TEGRA186_GPIO_SCR_SEC_WEN | \
- TEGRA186_GPIO_SCR_SEC_REN | \
- TEGRA186_GPIO_SCR_SEC_G1R | \
- TEGRA186_GPIO_SCR_SEC_G1W)
-#define TEGRA186_GPIO_SCR_SEC_ENABLE (TEGRA186_GPIO_SCR_SEC_WEN | \
- TEGRA186_GPIO_SCR_SEC_REN)
/* control registers */
#define TEGRA186_GPIO_ENABLE_CONFIG 0x00
@@ -177,10 +171,18 @@ static inline bool tegra186_gpio_is_accessible(struct tegra_gpio *gpio, unsigned
value = __raw_readl(secure + TEGRA186_GPIO_SCR);
- if ((value & TEGRA186_GPIO_SCR_SEC_ENABLE) == 0)
- return true;
+ /*
+ * When SCR_SEC_[R|W]EN is unset, then we have full read/write access to all the
+ * registers for given GPIO pin.
+ * When SCR_SEC[R|W]EN is set, then there is need to further check the accompanying
+ * SCR_SEC_G1[R|W] bit to determine read/write access to all the registers for given
+ * GPIO pin.
+ */
- if ((value & TEGRA186_GPIO_FULL_ACCESS) == TEGRA186_GPIO_FULL_ACCESS)
+ if (((value & TEGRA186_GPIO_SCR_SEC_REN) == 0 ||
+ ((value & TEGRA186_GPIO_SCR_SEC_REN) && (value & TEGRA186_GPIO_SCR_SEC_G1R))) &&
+ ((value & TEGRA186_GPIO_SCR_SEC_WEN) == 0 ||
+ ((value & TEGRA186_GPIO_SCR_SEC_WEN) && (value & TEGRA186_GPIO_SCR_SEC_G1W))))
return true;
return false;
The controller has several register bits describing access control information for a given GPIO pin. When SCR_SEC_[R|W]EN is unset, it means we have full read/write access to all the registers for given GPIO pin. When SCR_SEC[R|W]EN is set, it means we need to further check the accompanying SCR_SEC_G1[R|W] bit to determine read/write access to all the registers for given GPIO pin. This check was previously declaring that a GPIO pin was accessible only if either of the following conditions were met: - SCR_SEC_REN + SCR_SEC_WEN both set or - SCR_SEC_REN + SCR_SEC_WEN both set and SCR_SEC_G1R + SCR_SEC_G1W both set Update the check to properly handle cases where only one of SCR_SEC_REN or SCR_SEC_WEN is set. Fixes: b2b56a163230 ("gpio: tegra186: Check GPIO pin permission before access.") Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> --- V2 -> V3: Retain Thierry's 'Acked-by' tag from V1 and add change log. V1 -> V2: Fix kernel test bot warning. drivers/gpio/gpio-tegra186.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)