diff mbox series

[v3,1/2] wifi: ath12k: Don't drop tx_status in failure case

Message ID 20240429114841.413901-2-quic_kathirve@quicinc.com
State Superseded
Headers show
Series wifi: ath12k: drop failed transmitted frames from metric calculation | expand

Commit Message

Karthikeyan Kathirvel April 29, 2024, 11:48 a.m. UTC 
From: Sven Eckelmann <sven@narfation.org>

When a station idles for a long time, hostapd will try to send
a QoS Null frame to the station as "poll". NL80211_CMD_PROBE_CLIENT
is used for this purpose.
And the skb will be added to ack_status_frame - waiting for a
completion via ieee80211_report_ack_skb().

But when the peer was already removed before the tx_complete arrives,
the peer will be missing. And when using dev_kfree_skb_any (instead
of going through mac80211), the entry will stay inside
ack_status_frames thus not clean up related information in its
internal data structures. This IDR will therefore run full after
8K request were generated for such clients.
At this point, the access point will then just stall and not allow
any new clients because idr_alloc() for ack_status_frame will fail.

ieee80211_free_txskb() on the other hand will (when required) call
ieee80211_report_ack_skb() and make sure that (when required) remove
the entry from the ack_status_frame and clean up related
information in its internal data structures.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-1-c0af729d6229@narfation.org
---
 drivers/net/wireless/ath/ath12k/dp_tx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Sven Eckelmann April 29, 2024, 11:54 a.m. UTC | #1 
On Monday, 29 April 2024 13:48:39 CEST Karthikeyan Kathirvel wrote:
> From: Sven Eckelmann <sven@narfation.org>
> 
> When a station idles for a long time, hostapd will try to send
> a QoS Null frame to the station as "poll". NL80211_CMD_PROBE_CLIENT
> is used for this purpose.
> And the skb will be added to ack_status_frame - waiting for a
> completion via ieee80211_report_ack_skb().
> 
> But when the peer was already removed before the tx_complete arrives,
> the peer will be missing. And when using dev_kfree_skb_any (instead
> of going through mac80211), the entry will stay inside
> ack_status_frames thus not clean up related information in its
> internal data structures. This IDR will therefore run full after
> 8K request were generated for such clients.
> At this point, the access point will then just stall and not allow
> any new clients because idr_alloc() for ack_status_frame will fail.
> 
> ieee80211_free_txskb() on the other hand will (when required) call
> ieee80211_report_ack_skb() and make sure that (when required) remove
> the entry from the ack_status_frame and clean up related
> information in its internal data structures.
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Thanks for porting and testing both patches on ath12k.

Kind regards,
	Sven
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/dp_tx.c b/drivers/net/wireless/ath/ath12k/dp_tx.c
index 9b6d7d72f57c..6a387f1f9567 100644
--- a/drivers/net/wireless/ath/ath12k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_tx.c
@@ -448,6 +448,7 @@  static void ath12k_dp_tx_complete_msdu(struct ath12k *ar,
 				       struct hal_tx_status *ts)
 {
 	struct ath12k_base *ab = ar->ab;
+	struct ath12k_hw *ah = ar->ah;
 	struct ieee80211_tx_info *info;
 	struct ath12k_skb_cb *skb_cb;
 
@@ -466,12 +467,12 @@  static void ath12k_dp_tx_complete_msdu(struct ath12k *ar,
 	rcu_read_lock();
 
 	if (!rcu_dereference(ab->pdevs_active[ar->pdev_idx])) {
-		dev_kfree_skb_any(msdu);
+		ieee80211_free_txskb(ah->hw, msdu);
 		goto exit;
 	}
 
 	if (!skb_cb->vif) {
-		dev_kfree_skb_any(msdu);
+		ieee80211_free_txskb(ah->hw, msdu);
 		goto exit;
 	}