diff mbox series

[v3,2/2] arm64: dts: qcom: sm8150: Add video clock controller node

Message ID 20240501-videocc-sm8150-dt-node-v3-2-2c4bd9ef48bd@quicinc.com
State Superseded
Headers show
Series Add DT support for video clock controller on SM8150 | expand

Commit Message

Satya Priya Kakitapalli May 1, 2024, 8:32 a.m. UTC
Add device node for video clock controller on Qualcomm
SM8150 platform.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8155p.dtsi |  4 ++++
 arch/arm64/boot/dts/qcom/sm8150.dtsi  | 14 ++++++++++++++
 2 files changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8155p.dtsi b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
index ffb7ab695213..9e70effc72e1 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
@@ -38,3 +38,7 @@  &rpmhpd {
 	 */
 	compatible = "qcom,sa8155p-rpmhpd";
 };
+
+&videocc {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index a35c0852b5a1..55c9046f4fb9 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -14,6 +14,7 @@ 
 #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
 #include <dt-bindings/clock/qcom,gcc-sm8150.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
+#include <dt-bindings/clock/qcom,videocc-sm8150.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm8150.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -3715,6 +3716,19 @@  usb_2_dwc3: usb@a800000 {
 			};
 		};
 
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sm8150-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		camnoc_virt: interconnect@ac00000 {
 			compatible = "qcom,sm8150-camnoc-virt";
 			reg = <0 0x0ac00000 0 0x1000>;