diff mbox series

[v2,2/8] spi: fsl-lpspi: use 'time_left' variable with wait_for_completion_timeout()

Message ID 20240430114142.28551-3-wsa+renesas@sang-engineering.com
State Accepted
Commit eef51e99f7b9ecc903a3a9ad9e7ca84dc35c3f52
Headers show
Series spi: use 'time_left' instead of 'timeout' with wait_for_*() functions | expand

Commit Message

Wolfram Sang April 30, 2024, 11:41 a.m. UTC 
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:

	timeout = wait_for_completion_timeout(...)
	if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/spi/spi-fsl-lpspi.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 92a662d1b55c..aa5ed254be46 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -553,7 +553,7 @@  static int fsl_lpspi_dma_transfer(struct spi_controller *controller,
 {
 	struct dma_async_tx_descriptor *desc_tx, *desc_rx;
 	unsigned long transfer_timeout;
-	unsigned long timeout;
+	unsigned long time_left;
 	struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
 	int ret;
 
@@ -594,9 +594,9 @@  static int fsl_lpspi_dma_transfer(struct spi_controller *controller,
 							       transfer->len);
 
 		/* Wait eDMA to finish the data transfer.*/
-		timeout = wait_for_completion_timeout(&fsl_lpspi->dma_tx_completion,
-						      transfer_timeout);
-		if (!timeout) {
+		time_left = wait_for_completion_timeout(&fsl_lpspi->dma_tx_completion,
+							transfer_timeout);
+		if (!time_left) {
 			dev_err(fsl_lpspi->dev, "I/O Error in DMA TX\n");
 			dmaengine_terminate_all(controller->dma_tx);
 			dmaengine_terminate_all(controller->dma_rx);
@@ -604,9 +604,9 @@  static int fsl_lpspi_dma_transfer(struct spi_controller *controller,
 			return -ETIMEDOUT;
 		}
 
-		timeout = wait_for_completion_timeout(&fsl_lpspi->dma_rx_completion,
-						      transfer_timeout);
-		if (!timeout) {
+		time_left = wait_for_completion_timeout(&fsl_lpspi->dma_rx_completion,
+							transfer_timeout);
+		if (!time_left) {
 			dev_err(fsl_lpspi->dev, "I/O Error in DMA RX\n");
 			dmaengine_terminate_all(controller->dma_tx);
 			dmaengine_terminate_all(controller->dma_rx);