@@ -1016,6 +1016,9 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA);
+ if (aux_status == AUX_STATUS_TIMEOUT_ERROR)
+ return -ETIMEDOUT;
+
dev_warn(dp->dev, "AUX CH error happened: %#x (%d)\n",
aux_status, !!(reg & AUX_ERR));
goto aux_error;
@@ -361,6 +361,15 @@
/* ANALOGIX_DP_AUX_CH_STA */
#define AUX_BUSY (0x1 << 4)
#define AUX_STATUS_MASK (0xf << 0)
+#define AUX_STATUS_OK (0x0 << 0)
+#define AUX_STATUS_NACK_ERROR (0x1 << 0)
+#define AUX_STATUS_TIMEOUT_ERROR (0x2 << 0)
+#define AUX_STATUS_UNKNOWN_ERROR (0x3 << 0)
+#define AUX_STATUS_MUCH_DEFER_ERROR (0x4 << 0)
+#define AUX_STATUS_TX_SHORT_ERROR (0x5 << 0)
+#define AUX_STATUS_RX_SHORT_ERROR (0x6 << 0)
+#define AUX_STATUS_NACK_WITHOUT_M_ERROR (0x7 << 0)
+#define AUX_STATUS_I2C_NACK_ERROR (0x8 << 0)
/* ANALOGIX_DP_AUX_CH_DEFER_CTL */
#define DEFER_CTRL_EN (0x1 << 7)
Timeouts on the AUX bus are to be expected in certain normal operating conditions. There is no need to raise an error log or re-initialize the whole AUX state machine. Simply acknowledge the AUX_ERR interrupt and let upper layers know about the timeout. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 3 +++ drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 9 +++++++++ 2 files changed, 12 insertions(+)