diff mbox series

bpftool, selftests/hid/bpf: fix 29 clang warnings

Message ID 20240505215636.63592-1-jhubbard@nvidia.com
State New
Headers show
Series bpftool, selftests/hid/bpf: fix 29 clang warnings | expand

Commit Message

John Hubbard May 5, 2024, 9:56 p.m. UTC
When building either tools/bpf/bpftool, or tools/testing/selftests/hid,
(the same Makefile is used for these), clang generates many instances of
a warning that is useless here:

    "clang: warning: -lLLVM-17: 'linker' input unused"

Silence this in both locations, by disabling that warning when building
with clang.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
 tools/bpf/bpftool/Makefile | 4 ++++
 1 file changed, 4 insertions(+)


base-commit: f462ae0edd3703edd6f22fe41d336369c38b884b
prerequisite-patch-id: b901ece2a5b78503e2fb5480f20e304d36a0ea27

Comments

Quentin Monnet May 5, 2024, 10:36 p.m. UTC | #1
On 05/05/2024 22:56, John Hubbard wrote:
> When building either tools/bpf/bpftool, or tools/testing/selftests/hid,
> (the same Makefile is used for these), clang generates many instances of
> a warning that is useless here:
> 
>     "clang: warning: -lLLVM-17: 'linker' input unused"
> 
> Silence this in both locations, by disabling that warning when building
> with clang.
> 
> Signed-off-by: John Hubbard <jhubbard@nvidia.com>
> ---
>  tools/bpf/bpftool/Makefile | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
> index e9154ace80ff..c7457921d136 100644
> --- a/tools/bpf/bpftool/Makefile
> +++ b/tools/bpf/bpftool/Makefile
> @@ -133,6 +133,10 @@ CFLAGS += -DUSE_LIBCAP
>  LIBS += -lcap
>  endif
>  
> +ifneq ($(LLVM),)
> +    CFLAGS += -Wno-unused-command-line-argument
> +endif
Thanks! If possible, I'd rather keep the warning enabled, and fix the
command line instead. Looking at the error and the Makefile, we may not 
need the -lLLVM<version> in the CFLAGS at all, but only in $(LIBS). On
my setup, I can build successfully, without the warnings, with the
following patch:

------
diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
index b67454b45a49..dfa4f1bebbb3 100644
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -147,7 +147,7 @@ ifeq ($(feature-llvm),1)
   # If LLVM is available, use it for JIT disassembly
   CFLAGS  += -DHAVE_LLVM_SUPPORT
   LLVM_CONFIG_LIB_COMPONENTS := mcdisassembler all-targets
-  CFLAGS  += $(shell $(LLVM_CONFIG) --cflags --libs $(LLVM_CONFIG_LIB_COMPONENTS))
+  CFLAGS  += $(shell $(LLVM_CONFIG) --cflags)
   LIBS    += $(shell $(LLVM_CONFIG) --libs $(LLVM_CONFIG_LIB_COMPONENTS))
   ifeq ($(shell $(LLVM_CONFIG) --shared-mode),static)
     LIBS += $(shell $(LLVM_CONFIG) --system-libs $(LLVM_CONFIG_LIB_COMPONENTS))
------

Could you please check whether that works on your side, too?

Quentin
John Hubbard May 5, 2024, 10:48 p.m. UTC | #2
On 5/5/24 3:36 PM, Quentin Monnet wrote:
> On 05/05/2024 22:56, John Hubbard wrote:
...
> Thanks! If possible, I'd rather keep the warning enabled, and fix the
> command line instead. Looking at the error and the Makefile, we may not
> need the -lLLVM<version> in the CFLAGS at all, but only in $(LIBS). On
> my setup, I can build successfully, without the warnings, with the
> following patch:
> 
> ------
> diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
> index b67454b45a49..dfa4f1bebbb3 100644
> --- a/tools/bpf/bpftool/Makefile
> +++ b/tools/bpf/bpftool/Makefile
> @@ -147,7 +147,7 @@ ifeq ($(feature-llvm),1)
>     # If LLVM is available, use it for JIT disassembly
>     CFLAGS  += -DHAVE_LLVM_SUPPORT
>     LLVM_CONFIG_LIB_COMPONENTS := mcdisassembler all-targets
> -  CFLAGS  += $(shell $(LLVM_CONFIG) --cflags --libs $(LLVM_CONFIG_LIB_COMPONENTS))
> +  CFLAGS  += $(shell $(LLVM_CONFIG) --cflags)
>     LIBS    += $(shell $(LLVM_CONFIG) --libs $(LLVM_CONFIG_LIB_COMPONENTS))
>     ifeq ($(shell $(LLVM_CONFIG) --shared-mode),static)
>       LIBS += $(shell $(LLVM_CONFIG) --system-libs $(LLVM_CONFIG_LIB_COMPONENTS))
> ------
> 
> Could you please check whether that works on your side, too?
> 

Yes, that works, and of course that's much better. Please let me
know if you prefer me to post a v2 with that, or if you plan
on sending it yourself?

thanks,
Quentin Monnet May 5, 2024, 10:51 p.m. UTC | #3
On 05/05/2024 23:48, John Hubbard wrote:
> On 5/5/24 3:36 PM, Quentin Monnet wrote:
>> On 05/05/2024 22:56, John Hubbard wrote:
> ...
>> Thanks! If possible, I'd rather keep the warning enabled, and fix the
>> command line instead. Looking at the error and the Makefile, we may not
>> need the -lLLVM<version> in the CFLAGS at all, but only in $(LIBS). On
>> my setup, I can build successfully, without the warnings, with the
>> following patch:
>>
>> ------
>> diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
>> index b67454b45a49..dfa4f1bebbb3 100644
>> --- a/tools/bpf/bpftool/Makefile
>> +++ b/tools/bpf/bpftool/Makefile
>> @@ -147,7 +147,7 @@ ifeq ($(feature-llvm),1)
>>     # If LLVM is available, use it for JIT disassembly
>>     CFLAGS  += -DHAVE_LLVM_SUPPORT
>>     LLVM_CONFIG_LIB_COMPONENTS := mcdisassembler all-targets
>> -  CFLAGS  += $(shell $(LLVM_CONFIG) --cflags --libs
>> $(LLVM_CONFIG_LIB_COMPONENTS))
>> +  CFLAGS  += $(shell $(LLVM_CONFIG) --cflags)
>>     LIBS    += $(shell $(LLVM_CONFIG) --libs
>> $(LLVM_CONFIG_LIB_COMPONENTS))
>>     ifeq ($(shell $(LLVM_CONFIG) --shared-mode),static)
>>       LIBS += $(shell $(LLVM_CONFIG) --system-libs
>> $(LLVM_CONFIG_LIB_COMPONENTS))
>> ------
>>
>> Could you please check whether that works on your side, too?
>>
> 
> Yes, that works, and of course that's much better. Please let me
> know if you prefer me to post a v2 with that, or if you plan
> on sending it yourself?
Please go ahead!
Quentin
diff mbox series

Patch

diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
index e9154ace80ff..c7457921d136 100644
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -133,6 +133,10 @@  CFLAGS += -DUSE_LIBCAP
 LIBS += -lcap
 endif
 
+ifneq ($(LLVM),)
+    CFLAGS += -Wno-unused-command-line-argument
+endif
+
 include $(wildcard $(OUTPUT)*.d)
 
 all: $(OUTPUT)bpftool