@@ -11,6 +11,7 @@
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/rpmb.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/tee_drv.h>
@@ -80,6 +81,31 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm,
shm->pages = NULL;
}
+void optee_bus_scan_rpmb(struct work_struct *work)
+{
+ struct optee *optee = container_of(work, struct optee,
+ rpmb_scan_bus_work);
+ int ret;
+
+ if (!optee->rpmb_scan_bus_done) {
+ ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB);
+ optee->rpmb_scan_bus_done = !ret;
+ if (ret && ret != -ENODEV)
+ pr_info("Scanning for RPMB device: ret %d\n", ret);
+ }
+}
+
+int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action,
+ void *data)
+{
+ struct optee *optee = container_of(intf, struct optee, rpmb_intf);
+
+ if (action == RPMB_NOTIFY_ADD_DEVICE)
+ schedule_work(&optee->rpmb_scan_bus_work);
+
+ return 0;
+}
+
static void optee_bus_scan(struct work_struct *work)
{
WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP));
@@ -161,6 +187,8 @@ void optee_release_supp(struct tee_context *ctx)
void optee_remove_common(struct optee *optee)
{
+ rpmb_interface_unregister(&optee->rpmb_intf);
+ cancel_work_sync(&optee->rpmb_scan_bus_work);
/* Unregister OP-TEE specific client devices on TEE bus */
optee_unregister_devices();
@@ -177,6 +205,8 @@ void optee_remove_common(struct optee *optee)
tee_shm_pool_free(optee->pool);
optee_supp_uninit(&optee->supp);
mutex_destroy(&optee->call_queue.mutex);
+ rpmb_dev_put(optee->rpmb_dev);
+ mutex_destroy(&optee->rpmb_dev_mutex);
}
static int smc_abi_rc;
@@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session,
ret = tee_client_invoke_func(ctx, &inv_arg, param);
if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) &&
(inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) {
+ /*
+ * TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting
+ * the list of device TAs that depends on RPMB but a usable
+ * RPMB device isn't found.
+ */
+ if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE)
+ return -ENODEV;
pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n",
inv_arg.ret);
return -EINVAL;
@@ -7,6 +7,7 @@
#include <linux/arm_ffa.h>
#include <linux/errno.h>
+#include <linux/rpmb.h>
#include <linux/scatterlist.h>
#include <linux/sched.h>
#include <linux/slab.h>
@@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
optee_cq_init(&optee->call_queue, 0);
optee_supp_init(&optee->supp);
optee_shm_arg_cache_init(optee, arg_cache_flags);
+ mutex_init(&optee->rpmb_dev_mutex);
ffa_dev_set_drvdata(ffa_dev, optee);
ctx = teedev_open(optee->teedev);
if (IS_ERR(ctx)) {
@@ -955,6 +957,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
if (rc)
goto err_unregister_devices;
+ INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb);
+ optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev;
+ rpmb_interface_register(&optee->rpmb_intf);
pr_info("initialized driver\n");
return 0;
@@ -968,6 +973,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
teedev_close_context(ctx);
err_rhashtable_free:
rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL);
+ rpmb_dev_put(optee->rpmb_dev);
+ mutex_destroy(&optee->rpmb_dev_mutex);
+ rpmb_interface_unregister(&optee->rpmb_intf);
optee_supp_uninit(&optee->supp);
mutex_destroy(&optee->call_queue.mutex);
mutex_destroy(&optee->ffa.mutex);
@@ -8,6 +8,7 @@
#include <linux/arm-smccc.h>
#include <linux/rhashtable.h>
+#include <linux/rpmb.h>
#include <linux/semaphore.h>
#include <linux/tee_drv.h>
#include <linux/types.h>
@@ -20,11 +21,13 @@
/* Some Global Platform error codes used in this driver */
#define TEEC_SUCCESS 0x00000000
#define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
+#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008
#define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A
#define TEEC_ERROR_COMMUNICATION 0xFFFF000E
#define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C
#define TEEC_ERROR_BUSY 0xFFFF000D
#define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010
+#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003
#define TEEC_ORIGIN_COMMS 0x00000002
@@ -197,6 +200,12 @@ struct optee_ops {
* @notif: notification synchronization struct
* @supp: supplicant synchronization struct for RPC to supplicant
* @pool: shared memory pool
+ * @mutex: mutex protecting @rpmb_dev
+ * @rpmb_dev: current RPMB device or NULL
+ * @rpmb_scan_bus_done flag if device registation of RPMB dependent devices
+ * was already done
+ * @rpmb_scan_bus_work workq to for an RPMB device and to scan optee bus
+ * and register RPMB dependent optee drivers
* @rpc_param_count: If > 0 number of RPC parameters to make room for
* @scan_bus_done flag if device registation was already done.
* @scan_bus_work workq to scan optee bus and register optee drivers
@@ -215,9 +224,15 @@ struct optee {
struct optee_notif notif;
struct optee_supp supp;
struct tee_shm_pool *pool;
+ /* Protects rpmb_dev pointer */
+ struct mutex rpmb_dev_mutex;
+ struct rpmb_dev *rpmb_dev;
+ struct notifier_block rpmb_intf;
unsigned int rpc_param_count;
- bool scan_bus_done;
+ bool scan_bus_done;
+ bool rpmb_scan_bus_done;
struct work_struct scan_bus_work;
+ struct work_struct rpmb_scan_bus_work;
};
struct optee_session {
@@ -280,8 +295,12 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session);
#define PTA_CMD_GET_DEVICES 0x0
#define PTA_CMD_GET_DEVICES_SUPP 0x1
+#define PTA_CMD_GET_DEVICES_RPMB 0x2
int optee_enumerate_devices(u32 func);
void optee_unregister_devices(void);
+void optee_bus_scan_rpmb(struct work_struct *work);
+int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action,
+ void *data);
int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm,
size_t size, size_t align,
@@ -103,4 +103,39 @@
/* I2C master control flags */
#define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0)
+/*
+ * Reset RPMB probing
+ *
+ * Releases an eventually already used RPMB devices and starts over searching
+ * for RPMB devices. Returns the kind of shared memory to use in subsequent
+ * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls.
+ *
+ * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for
+ * OPTEE_RPC_CMD_SHM_ALLOC
+ */
+#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22
+
+/*
+ * Probe next RPMB device
+ *
+ * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_*
+ * [out] value[0].b EXT CSD-slice 168 "RPMB Size"
+ * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count"
+ * [out] memref[1] Buffer with the raw CID
+ */
+#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23
+
+/* Type of RPMB device */
+#define OPTEE_RPC_RPMB_EMMC 0
+#define OPTEE_RPC_RPMB_UFS 1
+#define OPTEE_RPC_RPMB_NVME 2
+
+/*
+ * Replay Protected Memory Block access
+ *
+ * [in] memref[0] Frames to device
+ * [out] memref[1] Frames from device
+ */
+#define OPTEE_RPC_CMD_RPMB_FRAMES 24
+
#endif /*__OPTEE_RPC_CMD_H*/
@@ -7,6 +7,7 @@
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/rpmb.h>
#include <linux/slab.h>
#include <linux/tee_drv.h>
#include "optee_private.h"
@@ -255,6 +256,162 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm)
optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m);
}
+static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx,
+ struct optee *optee,
+ struct optee_msg_arg *arg)
+{
+ struct tee_param params[1];
+
+ if (!IS_ENABLED(CONFIG_RPMB)) {
+ handle_rpc_supp_cmd(ctx, optee, arg);
+ return;
+ }
+
+ if (arg->num_params != ARRAY_SIZE(params) ||
+ optee->ops->from_msg_param(optee, params, arg->num_params,
+ arg->params) ||
+ params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL;
+ params[0].u.value.b = 0;
+ params[0].u.value.c = 0;
+ if (optee->ops->to_msg_param(optee, arg->params,
+ arg->num_params, params)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ mutex_lock(&optee->rpmb_dev_mutex);
+ rpmb_dev_put(optee->rpmb_dev);
+ optee->rpmb_dev = NULL;
+ mutex_unlock(&optee->rpmb_dev_mutex);
+
+ arg->ret = TEEC_SUCCESS;
+}
+
+static int rpmb_type_to_rpc_type(enum rpmb_type rtype)
+{
+ switch (rtype) {
+ case RPMB_TYPE_EMMC:
+ return OPTEE_RPC_RPMB_EMMC;
+ case RPMB_TYPE_UFS:
+ return OPTEE_RPC_RPMB_UFS;
+ case RPMB_TYPE_NVME:
+ return OPTEE_RPC_RPMB_NVME;
+ default:
+ return -1;
+ }
+}
+
+static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data)
+{
+ return rpmb_type_to_rpc_type(rdev->descr.type) >= 0;
+}
+
+static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx,
+ struct optee *optee,
+ struct optee_msg_arg *arg)
+{
+ struct rpmb_dev *rdev;
+ struct tee_param params[2];
+ void *buf;
+
+ if (!IS_REACHABLE(CONFIG_RPMB)) {
+ handle_rpc_supp_cmd(ctx, optee, arg);
+ return;
+ }
+
+ if (arg->num_params != ARRAY_SIZE(params) ||
+ optee->ops->from_msg_param(optee, params, arg->num_params,
+ arg->params) ||
+ params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT ||
+ params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+ buf = tee_shm_get_va(params[1].u.memref.shm,
+ params[1].u.memref.shm_offs);
+ if (!buf) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ mutex_lock(&optee->rpmb_dev_mutex);
+ rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match);
+ rpmb_dev_put(optee->rpmb_dev);
+ optee->rpmb_dev = rdev;
+ mutex_unlock(&optee->rpmb_dev_mutex);
+
+ if (!rdev) {
+ arg->ret = TEEC_ERROR_ITEM_NOT_FOUND;
+ return;
+ }
+
+ if (params[1].u.memref.size < rdev->descr.dev_id_len) {
+ arg->ret = TEEC_ERROR_SHORT_BUFFER;
+ return;
+ }
+ memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len);
+ params[1].u.memref.size = rdev->descr.dev_id_len;
+ params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type);
+ params[0].u.value.b = rdev->descr.capacity;
+ params[0].u.value.c = rdev->descr.reliable_wr_count;
+ if (optee->ops->to_msg_param(optee, arg->params,
+ arg->num_params, params)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ arg->ret = TEEC_SUCCESS;
+}
+
+static void handle_rpc_func_rpmb_frames(struct tee_context *ctx,
+ struct optee *optee,
+ struct optee_msg_arg *arg)
+{
+ struct tee_param params[2];
+ struct rpmb_dev *rdev;
+ void *p0, *p1;
+
+ mutex_lock(&optee->rpmb_dev_mutex);
+ rdev = rpmb_dev_get(optee->rpmb_dev);
+ mutex_unlock(&optee->rpmb_dev_mutex);
+ if (!rdev) {
+ handle_rpc_supp_cmd(ctx, optee, arg);
+ return;
+ }
+
+ if (arg->num_params != ARRAY_SIZE(params) ||
+ optee->ops->from_msg_param(optee, params, arg->num_params,
+ arg->params) ||
+ params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT ||
+ params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ goto out;
+ }
+
+ p0 = tee_shm_get_va(params[0].u.memref.shm,
+ params[0].u.memref.shm_offs);
+ p1 = tee_shm_get_va(params[1].u.memref.shm,
+ params[1].u.memref.shm_offs);
+ if (rpmb_route_frames(rdev, p0, params[0].u.memref.size, p1,
+ params[1].u.memref.size)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ goto out;
+ }
+ if (optee->ops->to_msg_param(optee, arg->params,
+ arg->num_params, params)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ goto out;
+ }
+ arg->ret = TEEC_SUCCESS;
+out:
+ rpmb_dev_put(rdev);
+}
+
void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
struct optee_msg_arg *arg)
{
@@ -271,6 +428,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
case OPTEE_RPC_CMD_I2C_TRANSFER:
handle_rpc_func_cmd_i2c_transfer(ctx, arg);
break;
+ case OPTEE_RPC_CMD_RPMB_PROBE_RESET:
+ handle_rpc_func_rpmb_probe_reset(ctx, optee, arg);
+ break;
+ case OPTEE_RPC_CMD_RPMB_PROBE_NEXT:
+ handle_rpc_func_rpmb_probe_next(ctx, optee, arg);
+ break;
+ case OPTEE_RPC_CMD_RPMB_FRAMES:
+ handle_rpc_func_rpmb_frames(ctx, optee, arg);
+ break;
default:
handle_rpc_supp_cmd(ctx, optee, arg);
}
@@ -20,6 +20,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/rpmb.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/string.h>
@@ -1715,6 +1716,7 @@ static int optee_probe(struct platform_device *pdev)
optee->smc.memremaped_shm = memremaped_shm;
optee->pool = pool;
optee_shm_arg_cache_init(optee, arg_cache_flags);
+ mutex_init(&optee->rpmb_dev_mutex);
platform_set_drvdata(pdev, optee);
ctx = teedev_open(optee->teedev);
@@ -1769,6 +1771,9 @@ static int optee_probe(struct platform_device *pdev)
if (rc)
goto err_disable_shm_cache;
+ INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb);
+ optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev;
+ rpmb_interface_register(&optee->rpmb_intf);
pr_info("initialized driver\n");
return 0;
@@ -1782,6 +1787,8 @@ static int optee_probe(struct platform_device *pdev)
err_close_ctx:
teedev_close_context(ctx);
err_supp_uninit:
+ rpmb_dev_put(optee->rpmb_dev);
+ mutex_destroy(&optee->rpmb_dev_mutex);
optee_shm_arg_cache_uninit(optee);
optee_supp_uninit(&optee->supp);
mutex_destroy(&optee->call_queue.mutex);
Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and use an RPMB device via the RPMB subsystem instead of passing the RPMB frames via tee-supplicant in user space. A fallback mechanism is kept to route RPMB frames via tee-supplicant if the RPMB subsystem isn't available. The OP-TEE RPC ABI is extended to support iterating over all RPMB devices until one is found with the expected RPMB key already programmed. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> --- drivers/tee/optee/core.c | 30 ++++++ drivers/tee/optee/device.c | 7 ++ drivers/tee/optee/ffa_abi.c | 8 ++ drivers/tee/optee/optee_private.h | 21 +++- drivers/tee/optee/optee_rpc_cmd.h | 35 +++++++ drivers/tee/optee/rpc.c | 166 ++++++++++++++++++++++++++++++ drivers/tee/optee/smc_abi.c | 7 ++ 7 files changed, 273 insertions(+), 1 deletion(-)