diff mbox series

[v5,7/8] thermal: Add PCIe cooling driver

Message ID 20240508134744.52134-8-ilpo.jarvinen@linux.intel.com
State New
Headers show
Series PCI: Add PCIe bandwidth controller | expand

Commit Message

Ilpo Järvinen May 8, 2024, 1:47 p.m. UTC 
Add a thermal cooling driver to provide path to access PCIe bandwidth
controller using the usual thermal interfaces.

A cooling device is instantiated for controllable PCIe Ports from the
bwctrl service driver.

The thermal side state 0 means no throttling, i.e., maximum supported
PCIe Link Speed.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # From the cooling device interface perspective
---
 MAINTAINERS                    |  2 +
 drivers/pci/pcie/bwctrl.c      |  8 ++++
 drivers/thermal/Kconfig        | 10 ++++
 drivers/thermal/Makefile       |  2 +
 drivers/thermal/pcie_cooling.c | 84 ++++++++++++++++++++++++++++++++++
 include/linux/pci-bwctrl.h     | 28 ++++++++++++
 6 files changed, 134 insertions(+)
 create mode 100644 drivers/thermal/pcie_cooling.c
 create mode 100644 include/linux/pci-bwctrl.h

Comments

Jonathan Cameron May 9, 2024, 11:59 a.m. UTC | #1 
On Wed,  8 May 2024 16:47:43 +0300
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> wrote:

> Add a thermal cooling driver to provide path to access PCIe bandwidth
> controller using the usual thermal interfaces.
> 
> A cooling device is instantiated for controllable PCIe Ports from the
> bwctrl service driver.
> 
> The thermal side state 0 means no throttling, i.e., maximum supported
> PCIe Link Speed.
> 
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Acked-by: Rafael J. Wysocki <rafael@kernel.org> # From the cooling device interface perspective

> +struct thermal_cooling_device *pcie_cooling_device_register(struct pci_dev *port)
> +{
> +	struct thermal_cooling_device *cdev;
> +	char *name;
> +
> +	name = kasprintf(GFP_KERNEL, COOLING_DEV_TYPE_PREFIX "%s", pci_name(port));
> +	if (!name)
> +		return ERR_PTR(-ENOMEM);
> +
> +	cdev = thermal_cooling_device_register(name, port, &pcie_cooling_ops);
> +	kfree(name);

__free?  Only small saving, but I think it's just about worth it to
give you
	return thermal_cooling_device_register()
and drop the local cdev variable.


> +
> +	return cdev;
> +}

Otherwise LGTM
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index bd420cb09821..3a94ae81b13f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17104,6 +17104,8 @@  M:	Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	drivers/pci/pcie/bwctrl.c
+F:	drivers/thermal/pcie_cooling.c
+F:	include/linux/pci-bwctrl.h
 
 PCIE DRIVER FOR AMAZON ANNAPURNA LABS
 M:	Jonathan Chocron <jonnyc@amazon.com>
diff --git a/drivers/pci/pcie/bwctrl.c b/drivers/pci/pcie/bwctrl.c
index e97665848158..5d1df9e6a349 100644
--- a/drivers/pci/pcie/bwctrl.c
+++ b/drivers/pci/pcie/bwctrl.c
@@ -27,6 +27,7 @@ 
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 #include <linux/pci.h>
+#include <linux/pci-bwctrl.h>
 #include <linux/rwsem.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -38,10 +39,12 @@ 
  * struct pcie_bwctrl_data - PCIe bandwidth controller
  * @set_speed_mutex:	Serializes link speed changes
  * @lbms_count:		Count for LBMS (since last reset)
+ * @cdev:		thermal cooling device associated with the port
  */
 struct pcie_bwctrl_data {
 	struct mutex set_speed_mutex;
 	atomic_t lbms_count;
+	struct thermal_cooling_device *cdev;
 };
 
 static bool pcie_valid_speed(enum pci_bus_speed speed)
@@ -287,6 +290,8 @@  static int pcie_bwnotif_probe(struct pcie_device *srv)
 	pcie_bwnotif_enable(srv);
 	pci_info(port, "enabled with IRQ %d\n", srv->irq);
 
+	port->link_bwctrl->cdev = pcie_cooling_device_register(port);
+
 	return 0;
 }
 
@@ -294,6 +299,9 @@  static void pcie_bwnotif_remove(struct pcie_device *srv)
 {
 	struct pcie_bwctrl_data *data = get_service_data(srv);
 
+	if (data->cdev)
+		pcie_cooling_device_unregister(data->cdev);
+
 	scoped_guard(rwsem_write, &pcie_bwctrl_remove_rwsem)
 		srv->port->link_bwctrl = NULL;
 
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 204ed89a3ec9..7ddc44be4701 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -211,6 +211,16 @@  config DEVFREQ_THERMAL
 
 	  If you want this support, you should say Y here.
 
+config PCIE_THERMAL
+	bool "PCIe cooling support"
+	depends on PCIEPORTBUS
+	select PCIE_BWCTRL
+	help
+	  This implements PCIe cooling mechanism through bandwidth reduction
+	  for PCIe devices.
+
+	  If you want this support, you should say Y here.
+
 config THERMAL_EMULATION
 	bool "Thermal emulation mode support"
 	help
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 5cdf7d68687f..5b9bf8e80eb6 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -31,6 +31,8 @@  thermal_sys-$(CONFIG_CPU_IDLE_THERMAL)	+= cpuidle_cooling.o
 # devfreq cooling
 thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
 
+thermal_sys-$(CONFIG_PCIE_THERMAL) += pcie_cooling.o
+
 obj-$(CONFIG_K3_THERMAL)	+= k3_bandgap.o k3_j72xx_bandgap.o
 # platform thermal drivers
 obj-y				+= broadcom/
diff --git a/drivers/thermal/pcie_cooling.c b/drivers/thermal/pcie_cooling.c
new file mode 100644
index 000000000000..367290d57e99
--- /dev/null
+++ b/drivers/thermal/pcie_cooling.c
@@ -0,0 +1,84 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PCIe cooling device
+ *
+ * Copyright (C) 2023 Intel Corporation
+ */
+
+#include <linux/build_bug.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pci-bwctrl.h>
+#include <linux/slab.h>
+#include <linux/sprintf.h>
+#include <linux/thermal.h>
+
+#define COOLING_DEV_TYPE_PREFIX		"PCIe_Port_Link_Speed_"
+
+static int pcie_cooling_get_max_level(struct thermal_cooling_device *cdev, unsigned long *state)
+{
+	struct pci_dev *port = cdev->devdata;
+
+	/* cooling state 0 is same as the maximum PCIe speed */
+	*state = port->subordinate->max_bus_speed - PCIE_SPEED_2_5GT;
+
+	return 0;
+}
+
+static int pcie_cooling_get_cur_level(struct thermal_cooling_device *cdev, unsigned long *state)
+{
+	struct pci_dev *port = cdev->devdata;
+
+	/* cooling state 0 is same as the maximum PCIe speed */
+	*state = cdev->max_state - (port->subordinate->cur_bus_speed - PCIE_SPEED_2_5GT);
+
+	return 0;
+}
+
+static int pcie_cooling_set_cur_level(struct thermal_cooling_device *cdev, unsigned long state)
+{
+	struct pci_dev *port = cdev->devdata;
+	enum pci_bus_speed speed;
+
+	/* cooling state 0 is same as the maximum PCIe speed */
+	speed = (cdev->max_state - state) + PCIE_SPEED_2_5GT;
+
+	return pcie_set_target_speed(port, speed, true);
+}
+
+static struct thermal_cooling_device_ops pcie_cooling_ops = {
+	.get_max_state = pcie_cooling_get_max_level,
+	.get_cur_state = pcie_cooling_get_cur_level,
+	.set_cur_state = pcie_cooling_set_cur_level,
+};
+
+struct thermal_cooling_device *pcie_cooling_device_register(struct pci_dev *port)
+{
+	struct thermal_cooling_device *cdev;
+	char *name;
+
+	name = kasprintf(GFP_KERNEL, COOLING_DEV_TYPE_PREFIX "%s", pci_name(port));
+	if (!name)
+		return ERR_PTR(-ENOMEM);
+
+	cdev = thermal_cooling_device_register(name, port, &pcie_cooling_ops);
+	kfree(name);
+
+	return cdev;
+}
+
+void pcie_cooling_device_unregister(struct thermal_cooling_device *cdev)
+{
+	thermal_cooling_device_unregister(cdev);
+}
+
+/* For bus_speed <-> state arithmetic */
+static_assert(PCIE_SPEED_2_5GT + 1 == PCIE_SPEED_5_0GT);
+static_assert(PCIE_SPEED_5_0GT + 1 == PCIE_SPEED_8_0GT);
+static_assert(PCIE_SPEED_8_0GT + 1 == PCIE_SPEED_16_0GT);
+static_assert(PCIE_SPEED_16_0GT + 1 == PCIE_SPEED_32_0GT);
+static_assert(PCIE_SPEED_32_0GT + 1 == PCIE_SPEED_64_0GT);
+
+MODULE_AUTHOR("Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>");
+MODULE_DESCRIPTION("PCIe cooling driver");
diff --git a/include/linux/pci-bwctrl.h b/include/linux/pci-bwctrl.h
new file mode 100644
index 000000000000..cee07127455b
--- /dev/null
+++ b/include/linux/pci-bwctrl.h
@@ -0,0 +1,28 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * PCIe bandwidth controller
+ *
+ * Copyright (C) 2023-2024 Intel Corporation
+ */
+
+#ifndef LINUX_PCI_BWCTRL_H
+#define LINUX_PCI_BWCTRL_H
+
+#include <linux/pci.h>
+
+struct thermal_cooling_device;
+
+#ifdef CONFIG_PCIE_THERMAL
+struct thermal_cooling_device *pcie_cooling_device_register(struct pci_dev *port);
+void pcie_cooling_device_unregister(struct thermal_cooling_device *cdev);
+#else
+static inline struct thermal_cooling_device *pcie_cooling_device_register(struct pci_dev *port)
+{
+	return NULL;
+}
+static inline void pcie_cooling_device_unregister(struct thermal_cooling_device *cdev)
+{
+}
+#endif
+
+#endif