| Message ID | 20240513075901.2030293-1-liudingyuan@huawei.com |
|---|---|
| State | New |
| Headers | show |
| Series | gpiolib: acpi: Fix failed in acpi_gpiochip_find() by adding parent node match | expand |
On Mon, May 13, 2024 at 03:59:01PM +0800, Devyn Liu wrote: > Previous patch modified the standard used by acpi_gpiochip_find() > to match device nodes. Using the device node set in gc->gpiodev->d- > ev instead of gc->parent. > > However, there is a situation in gpio-dwapb where the GPIO device > driver will set gc->fwnode for each port corresponding to a child > node under a GPIO device, so gc->gpiodev->dev will be assigned the > value of each child node in gpiochip_add_data(). > > gpio-dwapb.c: > 128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio, > struct dwapb_port_property *pp, > unsigned int offs); > port->gc.fwnode = pp->fwnode; > > 693,39 static int dwapb_gpio_probe; > err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i); > > When other drivers request GPIO pin resources through the GPIO device > node provided by ACPI (corresponding to the parent node), the change > of the matching object to gc->gpiodev->dev in acpi_gpiochip_find() > only allows finding the value of each port (child node), resulting > in a failed request. > > Reapply the condition of using gc->parent for match in acpi_gpio- > chip_find() in the code can compatible with the problem of gpio-dwapb, > and will not affect the two cases mentioned in the patch: > 1. There is no setting for gc->fwnode. > 2. The case that depends on using gc->fwnode for match. > > Fixes: 5062e4c14b75 ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()") > Fixes: 067dbc1ea5ce ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()") > Signed-off-by: Devyn Liu <liudingyuan@huawei.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
On Mon, May 20, 2024 at 07:37:49AM +0300, Mika Westerberg wrote: > On Mon, May 13, 2024 at 03:59:01PM +0800, Devyn Liu wrote: > > Previous patch modified the standard used by acpi_gpiochip_find() > > to match device nodes. Using the device node set in gc->gpiodev->d- > > ev instead of gc->parent. > > > > However, there is a situation in gpio-dwapb where the GPIO device > > driver will set gc->fwnode for each port corresponding to a child > > node under a GPIO device, so gc->gpiodev->dev will be assigned the > > value of each child node in gpiochip_add_data(). > > > > gpio-dwapb.c: > > 128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio, > > struct dwapb_port_property *pp, > > unsigned int offs); > > port->gc.fwnode = pp->fwnode; > > > > 693,39 static int dwapb_gpio_probe; > > err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i); > > > > When other drivers request GPIO pin resources through the GPIO device > > node provided by ACPI (corresponding to the parent node), the change > > of the matching object to gc->gpiodev->dev in acpi_gpiochip_find() > > only allows finding the value of each port (child node), resulting > > in a failed request. > > > > Reapply the condition of using gc->parent for match in acpi_gpio- > > chip_find() in the code can compatible with the problem of gpio-dwapb, > > and will not affect the two cases mentioned in the patch: > > 1. There is no setting for gc->fwnode. > > 2. The case that depends on using gc->fwnode for match. > > > > Fixes: 5062e4c14b75 ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()") > > Fixes: 067dbc1ea5ce ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()") > > Signed-off-by: Devyn Liu <liudingyuan@huawei.com> > > Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Pushed to my review and testing queue, thanks!
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 7f140df40f35..6078fea3e021 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -128,7 +128,8 @@ static bool acpi_gpio_deferred_req_irqs_done; static int acpi_gpiochip_find(struct gpio_chip *gc, const void *data) { - return device_match_acpi_handle(&gc->gpiodev->dev, data); + return device_match_acpi_handle(&gc->gpiodev->dev, data) || + (gc->parent && device_match_acpi_handle(gc->parent, data)); } /**
Previous patch modified the standard used by acpi_gpiochip_find() to match device nodes. Using the device node set in gc->gpiodev->d- ev instead of gc->parent. However, there is a situation in gpio-dwapb where the GPIO device driver will set gc->fwnode for each port corresponding to a child node under a GPIO device, so gc->gpiodev->dev will be assigned the value of each child node in gpiochip_add_data(). gpio-dwapb.c: 128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio, struct dwapb_port_property *pp, unsigned int offs); port->gc.fwnode = pp->fwnode; 693,39 static int dwapb_gpio_probe; err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i); When other drivers request GPIO pin resources through the GPIO device node provided by ACPI (corresponding to the parent node), the change of the matching object to gc->gpiodev->dev in acpi_gpiochip_find() only allows finding the value of each port (child node), resulting in a failed request. Reapply the condition of using gc->parent for match in acpi_gpio- chip_find() in the code can compatible with the problem of gpio-dwapb, and will not affect the two cases mentioned in the patch: 1. There is no setting for gc->fwnode. 2. The case that depends on using gc->fwnode for match. Fixes: 5062e4c14b75 ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()") Fixes: 067dbc1ea5ce ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()") Signed-off-by: Devyn Liu <liudingyuan@huawei.com> --- drivers/gpio/gpiolib-acpi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)