new file mode 100644
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/st,stih407-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi digital thermal sensor (DTS)
+
+maintainers:
+ - Patrice Chotard <patrice.chotard@foss.st.com>
+ - Lee Jones <lee@kernel.org>
+
+allOf:
+ - $ref: thermal-sensor.yaml
+
+properties:
+ compatible:
+ const: st,stih407-thermal
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: thermal
+
+ interrupts:
+ description:
+ For thermal sensors for which no interrupt has been defined, a polling
+ delay of 1000ms will be used to read the temperature from device.
+ maxItems: 1
+
+ '#thermal-sensor-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ temperature-sensor@91a0000 {
+ compatible = "st,stih407-thermal";
+ reg = <0x91a0000 0x28>;
+ clock-names = "thermal";
+ clocks = <&CLK_SYSIN>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ };
+...
deleted file mode 100644
@@ -1,32 +0,0 @@
-Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
-
-Required parameters:
--------------------
-
-compatible : Should be "st,stih407-thermal"
-
-clock-names : Should be "thermal".
- See: Documentation/devicetree/bindings/resource-names.txt
-clocks : Phandle of the clock used by the thermal sensor.
- See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional parameters:
--------------------
-
-reg : For non-sysconf based sensors, this should be the physical base
- address and length of the sensor's registers.
-interrupts : Standard way to define interrupt number.
- NB: For thermal sensor's for which no interrupt has been
- defined, a polling delay of 1000ms will be used to read the
- temperature from device.
-
-Example:
-
- temp0@91a0000 {
- compatible = "st,stih407-thermal";
- reg = <0x91a0000 0x28>;
- clock-names = "thermal";
- clocks = <&CLK_SYSIN>;
- interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
- st,passive_cooling_temp = <110>;
- };