@@ -14,47 +14,51 @@
#include <linux/property.h>
#include <linux/thermal.h>
#include <linux/units.h>
+
#include "thermal_hwmon.h"
-#define LOONGSON2_MAX_SENSOR_SEL_NUM 3
+#define LOONGSON2_MAX_SENSOR_SEL_NUM 3
-#define LOONGSON2_THSENS_CTRL_HI_REG 0x0
-#define LOONGSON2_THSENS_CTRL_LOW_REG 0x8
-#define LOONGSON2_THSENS_STATUS_REG 0x10
-#define LOONGSON2_THSENS_OUT_REG 0x14
+#define LOONGSON2_THSENS_CTRL_HI_REG 0x0
+#define LOONGSON2_THSENS_CTRL_LOW_REG 0x8
+#define LOONGSON2_THSENS_STATUS_REG 0x10
+#define LOONGSON2_THSENS_OUT_REG 0x14
-#define LOONGSON2_THSENS_INT_LO BIT(0)
-#define LOONGSON2_THSENS_INT_HIGH BIT(1)
-#define LOONGSON2_THSENS_OUT_MASK 0xFF
+#define LOONGSON2_THSENS_INT_LO BIT(0)
+#define LOONGSON2_THSENS_INT_HIGH BIT(1)
+#define LOONGSON2_THSENS_INT_EN (LOONGSON2_THSENS_INT_LO | \
+ LOONGSON2_THSENS_INT_HIGH)
+#define LOONGSON2_THSENS_OUT_MASK 0xFF
struct loongson2_thermal_chip_data {
- unsigned int thermal_sensor_sel;
+ unsigned int thermal_sensor_sel;
};
struct loongson2_thermal_data {
- void __iomem *regs;
+ void __iomem *regs;
const struct loongson2_thermal_chip_data *chip_data;
};
-static int loongson2_thermal_set(struct loongson2_thermal_data *data,
- int low, int high, bool enable)
+static void loongson2_set_ctrl_regs(struct loongson2_thermal_data *data,
+ int ctrl_data, bool low, bool enable)
{
- u64 reg_ctrl = 0;
- int reg_off = data->chip_data->thermal_sensor_sel * 2;
-
- low = clamp(-40, low, high);
- high = clamp(125, low, high);
+ int reg_ctrl = 0;
+ int reg_off = data->chip_data->thermal_sensor_sel * 2;
+ int ctrl_reg = low ? LOONGSON2_THSENS_CTRL_LOW_REG : LOONGSON2_THSENS_CTRL_HI_REG;
- low += HECTO;
- high += HECTO;
-
- reg_ctrl = low;
+ reg_ctrl = ctrl_data + HECTO;
reg_ctrl |= enable ? 0x100 : 0;
- writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_LOW_REG + reg_off);
+ writew(reg_ctrl, data->regs + ctrl_reg + reg_off);
+}
- reg_ctrl = high;
- reg_ctrl |= enable ? 0x100 : 0;
- writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_HI_REG + reg_off);
+static int loongson2_thermal_set(struct loongson2_thermal_data *data,
+ int low, int high, bool enable)
+{
+ /* Set low temperature threshold */
+ loongson2_set_ctrl_regs(data, clamp(-40, low, high), true, enable);
+
+ /* Set high temperature threshold */
+ loongson2_set_ctrl_regs(data, clamp(125, low, high), false, enable);
return 0;
}
@@ -75,8 +79,7 @@ static irqreturn_t loongson2_thermal_irq_thread(int irq, void *dev)
struct thermal_zone_device *tzd = dev;
struct loongson2_thermal_data *data = thermal_zone_device_priv(tzd);
- writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs +
- LOONGSON2_THSENS_STATUS_REG);
+ writeb(LOONGSON2_THSENS_INT_EN, data->regs + LOONGSON2_THSENS_STATUS_REG);
thermal_zone_device_update(tzd, THERMAL_EVENT_UNSPECIFIED);
@@ -116,14 +119,13 @@ static int loongson2_thermal_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
- writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs +
- LOONGSON2_THSENS_STATUS_REG);
+ writeb(LOONGSON2_THSENS_INT_EN, data->regs + LOONGSON2_THSENS_STATUS_REG);
loongson2_thermal_set(data, 0, 0, false);
for (i = 0; i <= LOONGSON2_MAX_SENSOR_SEL_NUM; i++) {
tzd = devm_thermal_of_zone_register(dev, i, data,
- &loongson2_of_thermal_ops);
+ &loongson2_of_thermal_ops);
if (!IS_ERR(tzd))
break;
@@ -135,7 +137,7 @@ static int loongson2_thermal_probe(struct platform_device *pdev)
}
ret = devm_request_threaded_irq(dev, irq, NULL, loongson2_thermal_irq_thread,
- IRQF_ONESHOT, "loongson2_thermal", tzd);
+ IRQF_ONESHOT, "loongson2_thermal", tzd);
if (ret < 0)
return dev_err_probe(dev, ret, "failed to request alarm irq\n");
@@ -167,4 +169,5 @@ static struct platform_driver loongson2_thermal_driver = {
module_platform_driver(loongson2_thermal_driver);
MODULE_DESCRIPTION("Loongson2 thermal driver");
+MODULE_AUTHOR("Loongson Technology Corporation Limited");
MODULE_LICENSE("GPL");