diff mbox series

[V6,01/10] wifi: mac80211: Add EHT UL MU-MIMO flag in ieee80211_bss_conf

Message ID 20240515181327.12855-2-quic_pradeepc@quicinc.com
State Superseded
Headers show
Series wifi: ath12k: add MU-MIMO and 160 MHz bandwidth support | expand

Commit Message

Pradeep Kumar Chitrapu May 15, 2024, 6:13 p.m. UTC 
Add flag for Full Bandwidth UL MU-MIMO for EHT. This is utilized
to pass EHT MU-MIMO configurations from user space to driver
in AP mode.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
---
 include/net/mac80211.h | 4 ++++
 net/mac80211/cfg.c     | 5 +++++
 2 files changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index cafc664ee531..bb8abe6735a8 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -701,6 +701,9 @@  struct ieee80211_fils_discovery {
  *	beamformee
  * @eht_mu_beamformer: in AP-mode, does this BSS enable operation as an EHT MU
  *	beamformer
+ * @eht_80mhz_full_bw_ul_mumimo: in AP-mode, does this BSS support the
+ *	reception of an EHT TB PPDU on an RU that spans the entire PPDU
+ *	bandwidth
  */
 struct ieee80211_bss_conf {
 	struct ieee80211_vif *vif;
@@ -793,6 +796,7 @@  struct ieee80211_bss_conf {
 	bool eht_su_beamformer;
 	bool eht_su_beamformee;
 	bool eht_mu_beamformer;
+	bool eht_80mhz_full_bw_ul_mumimo;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index b08e5d7687e3..96b2f31f0c8a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1379,6 +1379,11 @@  static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 				(IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_80MHZ |
 				 IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_160MHZ |
 				 IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_320MHZ);
+		link_conf->eht_80mhz_full_bw_ul_mumimo =
+			params->eht_cap->fixed.phy_cap_info[7] &
+				(IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_80MHZ |
+				 IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_160MHZ |
+				 IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_320MHZ);
 	} else {
 		link_conf->eht_su_beamformer = false;
 		link_conf->eht_su_beamformee = false;