diff mbox series

[1/3] pinctrl: cy8c95x0: Use single I2C lock

Message ID 20240521152602.1097764-1-patrick.rudolph@9elements.com
State New
Headers show
Series [1/3] pinctrl: cy8c95x0: Use single I2C lock | expand

Commit Message

Patrick Rudolph May 21, 2024, 3:25 p.m. UTC 
Currently there are 3 locks being used when accessing the chip, one
in the driver and one in each regmap. Reduce that to one driver only
lock that protects all regmap and regcache accesses.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
---
 drivers/pinctrl/pinctrl-cy8c95x0.c | 32 ++++++++++++++++--------------
 1 file changed, 17 insertions(+), 15 deletions(-)

Comments

Andy Shevchenko May 21, 2024, 5:24 p.m. UTC | #1 
On Tue, May 21, 2024 at 6:26 PM Patrick Rudolph
<patrick.rudolph@9elements.com> wrote:
>
> Currently there are 3 locks being used when accessing the chip, one
> in the driver and one in each regmap. Reduce that to one driver only
> lock that protects all regmap and regcache accesses.

Right. But please consider converting the driver to use cleanup.h.
Dunno if it requires a separate patch or can be folded into this one
as it seems you anyway touch almost all mutex calls in the code.
Linus?
Andy Shevchenko May 21, 2024, 5:35 p.m. UTC | #2 
On Tue, May 21, 2024 at 6:26 PM Patrick Rudolph
<patrick.rudolph@9elements.com> wrote:
>
> Use REGCACHE_MAPLE instead of REGCACHE_FLAT.

Reviewed-by: Andy Shevchenko <andy@kernel.org>
Linus Walleij May 28, 2024, 11:58 a.m. UTC | #3 
On Tue, May 21, 2024 at 7:25 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
> On Tue, May 21, 2024 at 6:26 PM Patrick Rudolph
> <patrick.rudolph@9elements.com> wrote:
> >
> > Currently there are 3 locks being used when accessing the chip, one
> > in the driver and one in each regmap. Reduce that to one driver only
> > lock that protects all regmap and regcache accesses.
>
> Right. But please consider converting the driver to use cleanup.h.
> Dunno if it requires a separate patch or can be folded into this one
> as it seems you anyway touch almost all mutex calls in the code.
> Linus?

I think it's best to add a separate patch for this for bisection,
just right after this one.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c
index 981c569bd671..ca54d91fdc77 100644
--- a/drivers/pinctrl/pinctrl-cy8c95x0.c
+++ b/drivers/pinctrl/pinctrl-cy8c95x0.c
@@ -453,7 +453,6 @@  cy8c95x0_mux_reg_read(void *context, unsigned int off, unsigned int *val)
 	u8 port = CY8C95X0_MUX_REGMAP_TO_PORT(off);
 	int ret, reg = CY8C95X0_MUX_REGMAP_TO_REG(off);
 
-	mutex_lock(&chip->i2c_lock);
 	/* Select the correct bank */
 	ret = regmap_write(chip->regmap, CY8C95X0_PORTSEL, port);
 	if (ret < 0)
@@ -463,11 +462,7 @@  cy8c95x0_mux_reg_read(void *context, unsigned int off, unsigned int *val)
 	 * Read the register through direct access regmap. The target range
 	 * is marked volatile.
 	 */
-	ret = regmap_read(chip->regmap, reg, val);
-out:
-	mutex_unlock(&chip->i2c_lock);
-
-	return ret;
+	return regmap_read(chip->regmap, reg, val);
 }
 
 static int
@@ -477,7 +472,6 @@  cy8c95x0_mux_reg_write(void *context, unsigned int off, unsigned int val)
 	u8 port = CY8C95X0_MUX_REGMAP_TO_PORT(off);
 	int ret, reg = CY8C95X0_MUX_REGMAP_TO_REG(off);
 
-	mutex_lock(&chip->i2c_lock);
 	/* Select the correct bank */
 	ret = regmap_write(chip->regmap, CY8C95X0_PORTSEL, port);
 	if (ret < 0)
@@ -487,11 +481,7 @@  cy8c95x0_mux_reg_write(void *context, unsigned int off, unsigned int val)
 	 * Write the register through direct access regmap. The target range
 	 * is marked volatile.
 	 */
-	ret = regmap_write(chip->regmap, reg, val);
-out:
-	mutex_unlock(&chip->i2c_lock);
-
-	return ret;
+	return regmap_write(chip->regmap, reg, val);
 }
 
 static bool cy8c95x0_mux_accessible_register(struct device *dev, unsigned int off)
@@ -524,6 +514,7 @@  static const struct regmap_config cy8c95x0_muxed_regmap = {
 	.num_reg_defaults_raw = MUXED_STRIDE * BANK_SZ,
 	.readable_reg = cy8c95x0_mux_accessible_register,
 	.writeable_reg = cy8c95x0_mux_accessible_register,
+	.disable_locking = true,
 };
 
 /* Direct access regmap */
@@ -542,6 +533,7 @@  static const struct regmap_config cy8c95x0_i2c_regmap = {
 
 	.cache_type = REGCACHE_FLAT,
 	.max_register = CY8C95X0_COMMAND,
+	.disable_locking = true,
 };
 
 static inline int cy8c95x0_regmap_update_bits_base(struct cy8c95x0_pinctrl *chip,
@@ -559,6 +551,8 @@  static inline int cy8c95x0_regmap_update_bits_base(struct cy8c95x0_pinctrl *chip
 	if (reg == CY8C95X0_PORTSEL)
 		return -EINVAL;
 
+	mutex_lock(&chip->i2c_lock);
+
 	/* Registers behind the PORTSEL mux have their own regmap */
 	if (cy8c95x0_muxed_register(reg)) {
 		regmap = chip->muxed_regmap;
@@ -574,7 +568,7 @@  static inline int cy8c95x0_regmap_update_bits_base(struct cy8c95x0_pinctrl *chip
 
 	ret = regmap_update_bits_base(regmap, off, mask, val, change, async, force);
 	if (ret < 0)
-		return ret;
+		goto out;
 
 	/* Update the cache when a WC bit is written */
 	if (cy8c95x0_wc_register(reg) && (mask & val)) {
@@ -595,6 +589,8 @@  static inline int cy8c95x0_regmap_update_bits_base(struct cy8c95x0_pinctrl *chip
 			regcache_cache_only(regmap, false);
 		}
 	}
+out:
+	mutex_unlock(&chip->i2c_lock);
 
 	return ret;
 }
@@ -667,7 +663,9 @@  static int cy8c95x0_regmap_read(struct cy8c95x0_pinctrl *chip, unsigned int reg,
 				unsigned int port, unsigned int *read_val)
 {
 	struct regmap *regmap;
-	int off;
+	int off, ret;
+
+	mutex_lock(&chip->i2c_lock);
 
 	/* Registers behind the PORTSEL mux have their own regmap */
 	if (cy8c95x0_muxed_register(reg)) {
@@ -682,7 +680,11 @@  static int cy8c95x0_regmap_read(struct cy8c95x0_pinctrl *chip, unsigned int reg,
 			off = reg;
 	}
 
-	return regmap_read(regmap, off, read_val);
+	ret = regmap_read(regmap, off, read_val);
+
+	mutex_unlock(&chip->i2c_lock);
+
+	return ret;
 }
 
 static int cy8c95x0_write_regs_mask(struct cy8c95x0_pinctrl *chip, int reg,