diff mbox series

[39/42] mmc: exynos_dw_mmc: Improve coding style

Message ID 20240522233135.26835-40-semen.protsenko@linaro.org
State Superseded
Headers show
Series mmc: dw_mmc: Enable eMMC on E850-96 board | expand

Commit Message

Sam Protsenko May 22, 2024, 11:31 p.m. UTC
Fix most of checkpatch warnings and other obvious style issues.

No functional change.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
 arch/arm/mach-exynos/include/mach/dwmmc.h | 36 +++++++++++++----------
 drivers/mmc/exynos_dw_mmc.c               | 26 ++++++----------
 2 files changed, 29 insertions(+), 33 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-exynos/include/mach/dwmmc.h b/arch/arm/mach-exynos/include/mach/dwmmc.h
index 7cb71be0d9fd..75d84988b7d6 100644
--- a/arch/arm/mach-exynos/include/mach/dwmmc.h
+++ b/arch/arm/mach-exynos/include/mach/dwmmc.h
@@ -7,24 +7,28 @@ 
 #ifndef __ASM_ARM_ARCH_DWMMC_H
 #define __ASM_ARM_ARCH_DWMMC_H
 
-#define DWMCI_CLKSEL		0x09C
-#define DWMCI_CLKSEL64		0x0a8
-#define DWMCI_SET_SAMPLE_CLK(x)	(x)
-#define DWMCI_SET_DRV_CLK(x)	((x) << 16)
-#define DWMCI_SET_DIV_RATIO(x)	((x) << 24)
+#include <linux/bitops.h>
 
-#define EMMCP_MPSBEGIN0		0x1200
-#define EMMCP_SEND0		0x1204
-#define EMMCP_CTRL0		0x120C
+#define DWMCI_CLKSEL			0x09c
+#define DWMCI_CLKSEL64			0x0a8
+#define DWMCI_SET_SAMPLE_CLK(x)		(x)
+#define DWMCI_SET_DRV_CLK(x)		((x) << 16)
+#define DWMCI_SET_DIV_RATIO(x)		((x) << 24)
 
-#define MPSCTRL_SECURE_READ_BIT		(0x1<<7)
-#define MPSCTRL_SECURE_WRITE_BIT	(0x1<<6)
-#define MPSCTRL_NON_SECURE_READ_BIT	(0x1<<5)
-#define MPSCTRL_NON_SECURE_WRITE_BIT	(0x1<<4)
-#define MPSCTRL_USE_FUSE_KEY		(0x1<<3)
-#define MPSCTRL_ECB_MODE		(0x1<<2)
-#define MPSCTRL_ENCRYPTION		(0x1<<1)
-#define MPSCTRL_VALID			(0x1<<0)
+/* Protector Register */
+#define DWMCI_EMMCP_BASE		0x1000
+#define EMMCP_MPSBEGIN0			(DWMCI_EMMCP_BASE + 0x0200)
+#define EMMCP_SEND0			(DWMCI_EMMCP_BASE + 0x0204)
+#define EMMCP_CTRL0			(DWMCI_EMMCP_BASE + 0x020c)
+
+#define MPSCTRL_SECURE_READ_BIT		BIT(7)
+#define MPSCTRL_SECURE_WRITE_BIT	BIT(6)
+#define MPSCTRL_NON_SECURE_READ_BIT	BIT(5)
+#define MPSCTRL_NON_SECURE_WRITE_BIT	BIT(4)
+#define MPSCTRL_USE_FUSE_KEY		BIT(3)
+#define MPSCTRL_ECB_MODE		BIT(2)
+#define MPSCTRL_ENCRYPTION		BIT(1)
+#define MPSCTRL_VALID			BIT(0)
 
 /* CLKSEL Register */
 #define DWMCI_DIVRATIO_BIT		24
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index 84a079256bca..9ac0c21216a1 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -45,7 +45,7 @@  struct exynos_dwmmc_variant {
 	u32 quirks;		/* quirk flags - see DWMCI_QUIRK_... */
 };
 
-/* Exynos implmentation specific drver private data */
+/* Exynos implementation specific driver private data */
 struct dwmci_exynos_priv_data {
 #if CONFIG_IS_ENABLED(DM_MMC)
 	struct dwmci_host host;
@@ -121,10 +121,7 @@  static int exynos_dwmmc_set_sclk(struct dwmci_host *host, unsigned long rate)
 	return 0;
 }
 
-/*
- * Function used as callback function to initialise the
- * CLKSEL register for every mmc channel.
- */
+/* Configure CLKSEL register with chosen timing values */
 static int exynos_dwmci_clksel(struct dwmci_host *host)
 {
 	struct dwmci_exynos_priv_data *priv = exynos_dwmmc_get_priv(host);
@@ -163,7 +160,7 @@  static u8 exynos_dwmmc_get_ciu_div(struct dwmci_host *host)
 				& DWMCI_DIVRATIO_MASK) + 1;
 }
 
-unsigned int exynos_dwmci_get_clk(struct dwmci_host *host, uint freq)
+static unsigned int exynos_dwmci_get_clk(struct dwmci_host *host, uint freq)
 {
 	unsigned long sclk;
 	u8 clk_div;
@@ -204,7 +201,6 @@  static void exynos_dwmci_board_init(struct dwmci_host *host)
 			     MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID);
 	}
 
-	/* Set to timing value at initial time */
 	if (priv->sdr_timing)
 		exynos_dwmci_clksel(host);
 }
@@ -213,8 +209,8 @@  static int exynos_dwmmc_of_to_plat(struct udevice *dev)
 {
 	struct dwmci_exynos_priv_data *priv = dev_get_priv(dev);
 	struct dwmci_host *host = &priv->host;
-	int err = 0;
 	u32 div, timing[2];
+	int err;
 
 	priv->chip = (struct exynos_dwmmc_variant *)dev_get_driver_data(dev);
 
@@ -222,9 +218,8 @@  static int exynos_dwmmc_of_to_plat(struct udevice *dev)
 	const void *blob = gd->fdt_blob;
 	int node = dev_of_offset(dev);
 
-	/* Extract device id for each mmc channel */
+	/* Obtain device ID for current MMC channel */
 	host->dev_id = pinmux_decode_periph_id(blob, node);
-
 	host->dev_index = dev_read_u32_default(dev, "index", host->dev_id);
 	if (host->dev_index == host->dev_id)
 		host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
@@ -240,10 +235,6 @@  static int exynos_dwmmc_of_to_plat(struct udevice *dev)
 		host->dev_index = 2; /* SD card */
 #endif
 
-	/* Get the bus width from the device node (Default is 4bit buswidth) */
-	host->buswidth = dev_read_u32_default(dev, "bus-width", 4);
-
-	/* Set the base address from the device node */
 	host->ioaddr = dev_read_addr_ptr(dev);
 	if (!host->ioaddr) {
 		printf("DWMMC%d: Can't get base address\n", host->dev_index);
@@ -254,17 +245,17 @@  static int exynos_dwmmc_of_to_plat(struct udevice *dev)
 		div = priv->chip->div;
 	else
 		div = dev_read_u32_default(dev, "samsung,dw-mshc-ciu-div", 0);
+
 	err = dev_read_u32_array(dev, "samsung,dw-mshc-sdr-timing", timing, 2);
 	if (err) {
 		printf("DWMMC%d: Can't get sdr-timings\n", host->dev_index);
 		return -EINVAL;
 	}
-
 	priv->sdr_timing = DWMCI_SET_SAMPLE_CLK(timing[0]) |
 			   DWMCI_SET_DRV_CLK(timing[1]) |
 			   DWMCI_SET_DIV_RATIO(div);
 
-	/* sdr_timing didn't assigned anything, use the default value */
+	/* sdr_timing wasn't set, use the default value */
 	if (!priv->sdr_timing) {
 		if (host->dev_index == 0)
 			priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL;
@@ -283,6 +274,7 @@  static int exynos_dwmmc_of_to_plat(struct udevice *dev)
 				   DWMCI_SET_DIV_RATIO(div);
 	}
 
+	host->buswidth = dev_read_u32_default(dev, "bus-width", 4);
 	host->fifo_depth = dev_read_u32_default(dev, "fifo-depth", 0);
 	host->bus_hz = dev_read_u32_default(dev, "clock-frequency", 0);
 
@@ -396,8 +388,8 @@  U_BOOT_DRIVER(exynos_dwmmc_drv) = {
 	.of_match	= exynos_dwmmc_ids,
 	.of_to_plat	= exynos_dwmmc_of_to_plat,
 	.bind		= exynos_dwmmc_bind,
-	.ops		= &dm_dwmci_ops,
 	.probe		= exynos_dwmmc_probe,
+	.ops		= &dm_dwmci_ops,
 	.priv_auto	= sizeof(struct dwmci_exynos_priv_data),
 	.plat_auto	= sizeof(struct exynos_mmc_plat),
 };