diff mbox series

[v6,06/20] dt-bindings: fsi: Document the FSI controller common properties

Message ID 20240522192524.3286237-7-eajames@linux.ibm.com
State New
Headers show
Series ARM: dts: aspeed: Add IBM P11 BMC systems | expand

Commit Message

Eddie James May 22, 2024, 7:25 p.m. UTC
Since there are multiple FSI controllers documented, the common
properties should be documented separately and then referenced
from the specific controller documentation. Add bus-frequency for
the FSI bus and CFAM local bus frequencies. Add interrupt
controller properties.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v5:
 - Switch from clock-frequency to bus-frequency

 .../bindings/fsi/fsi-controller.yaml          | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fsi/fsi-controller.yaml

Comments

Krzysztof Kozlowski May 23, 2024, 6:57 a.m. UTC | #1
On 22/05/2024 21:25, Eddie James wrote:
> Since there are multiple FSI controllers documented, the common
> properties should be documented separately and then referenced
> from the specific controller documentation. Add bus-frequency for
> the FSI bus and CFAM local bus frequencies. Add interrupt
> controller properties.
> 
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/fsi/fsi-controller.yaml b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
new file mode 100644
index 0000000000000..ffe191921b268
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
@@ -0,0 +1,66 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSI Controller Common Properties
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  FSI (FRU (Field Replaceable Unit) Service Interface) is a two wire bus. The
+  FSI bus is connected to a CFAM (Common FRU Access Macro) which contains
+  various engines such as I2C controllers, SPI controllers, etc.
+
+properties:
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+  '#interrupt-cells':
+    const: 1
+
+  bus-frequency:
+    minimum: 1
+    maximum: 200000000
+
+  interrupt-controller: true
+
+  no-scan-on-init:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The FSI controller cannot scan the bus during initialization.
+
+patternProperties:
+  "cfam@[0-9a-f],[0-9a-f]":
+    type: object
+    properties:
+      chip-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Processor index, a global unique chip ID which is used to identify
+          the physical location of the chip in a system specific way.
+
+      bus-frequency:
+        minimum: 1
+        maximum: 100000000
+
+      reg:
+        maxItems: 1
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+    required:
+      - reg
+
+    additionalProperties: true
+
+additionalProperties: true