diff mbox series

[4/9] arm64: dts: renesas: rzg2l: Enable Ethernet TXC output

Message ID 20240524094603.988-5-paul.barker.ct@bp.renesas.com
State Superseded
Headers show
Series Configure GbEth for RGMII on RZ/G2L family | expand

Commit Message

Paul Barker May 24, 2024, 9:45 a.m. UTC 
Configure ET0_TXC and ET1_TXC as outputs on the Renesas RZ/[GV]2L SMARC
SoMs, as per RGMII specification.

Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
---
 .../boot/dts/renesas/rzg2l-smarc-som.dtsi     | 76 +++++++++++--------
 1 file changed, 44 insertions(+), 32 deletions(-)

Comments

Geert Uytterhoeven May 30, 2024, 1:40 p.m. UTC | #1 
Hi Paul,

On Fri, May 24, 2024 at 11:47 AM Paul Barker
<paul.barker.ct@bp.renesas.com> wrote:
> Configure ET0_TXC and ET1_TXC as outputs on the Renesas RZ/[GV]2L SMARC
> SoMs, as per RGMII specification.
>
> Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>

Yep, TXC is MAC-to-PHY for RGMII, but PHY-to-MAC for MII.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

I believe this has a hard dependency on the driver patches, as a
failure to configure pin settings will cause the device to fail to probe?
Hence to avoid regressions, this has to wait one cycle...

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index 4409c47239b9..2b5e037ea9fa 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -180,41 +180,53 @@  adc_pins: adc {
 	};
 
 	eth0_pins: eth0 {
-		pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
-			 <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
-			 <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
-			 <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
-			 <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
-			 <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
-			 <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
-			 <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
-			 <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
-			 <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
-			 <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
-			 <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
-			 <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
-			 <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
-			 <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
-			 <RZG2L_PORT_PINMUX(1, 0, 1)>;  /* IRQ2 */
+		txc {
+			pinmux = <RZG2L_PORT_PINMUX(20, 0, 1)>; /* ET0_TXC */
+			output-enable;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
+				 <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+				 <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+				 <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+				 <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+				 <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+				 <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+				 <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+				 <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+				 <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+				 <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+				 <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+				 <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+				 <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
+				 <RZG2L_PORT_PINMUX(1, 0, 1)>;  /* IRQ2 */
+		};
 	};
 
 	eth1_pins: eth1 {
-		pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */
-			 <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */
-			 <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */
-			 <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */
-			 <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */
-			 <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */
-			 <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */
-			 <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */
-			 <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */
-			 <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */
-			 <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */
-			 <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
-			 <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
-			 <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
-			 <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */
-			 <RZG2L_PORT_PINMUX(1, 1, 1)>;  /* IRQ3 */
+		txc {
+			pinmux = <RZG2L_PORT_PINMUX(29, 0, 1)>; /* ET1_TXC */
+			output-enable;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */
+				 <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */
+				 <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */
+				 <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */
+				 <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */
+				 <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */
+				 <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */
+				 <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */
+				 <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */
+				 <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */
+				 <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
+				 <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
+				 <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
+				 <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */
+				 <RZG2L_PORT_PINMUX(1, 1, 1)>;  /* IRQ3 */
+		};
 	};
 
 	gpio-sd0-pwr-en-hog {