diff mbox series

[3/9] pinctrl: renesas: rzg2l: Support output enable on RZ/G2L

Message ID 20240524094603.988-4-paul.barker.ct@bp.renesas.com
State New
Headers show
Series Configure GbEth for RGMII on RZ/G2L family | expand

Commit Message

Paul Barker May 24, 2024, 9:45 a.m. UTC 
On the RZ/G2L SoC family, the direction of the Ethernet TXC/TX_CLK
signal is selectable to support an Ethernet PHY operating in either MII
or RGMII mode. By default, the signal is configured as an input and MII
mode is supported. The ETH_MODE register can be modified to configure
this signal as an output to support RGMII mode.

As this signal is by default an input, and can optionally be switched to
an output, it maps neatly onto an `output-enable` property in the device
tree.

Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 28 +++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

Comments

Geert Uytterhoeven May 30, 2024, 1:13 p.m. UTC | #1 
On Fri, May 24, 2024 at 11:46 AM Paul Barker
<paul.barker.ct@bp.renesas.com> wrote:
> On the RZ/G2L SoC family, the direction of the Ethernet TXC/TX_CLK
> signal is selectable to support an Ethernet PHY operating in either MII
> or RGMII mode. By default, the signal is configured as an input and MII
> mode is supported. The ETH_MODE register can be modified to configure
> this signal as an output to support RGMII mode.
>
> As this signal is by default an input, and can optionally be switched to
> an output, it maps neatly onto an `output-enable` property in the device
> tree.
>
> Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 08c68b95e67f..2fc73c516024 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -1016,6 +1016,23 @@  static bool rzg2l_ds_is_supported(struct rzg2l_pinctrl *pctrl, u32 caps,
 	return false;
 }
 
+static int rzg2l_pin_to_oen_bit(const struct rzg2l_hwcfg *hwcfg, u32 caps, u32 port, u8 pin)
+{
+	if (!(caps & PIN_CFG_OEN) || pin > hwcfg->oen_max_pin)
+		return -EINVAL;
+
+	/*
+	 * We can determine which Ethernet interface we're dealing with from
+	 * the caps.
+	 */
+	if (caps & PIN_CFG_IO_VMC_ETH0)
+		return 0;
+	if (caps & PIN_CFG_IO_VMC_ETH1)
+		return 1;
+
+	return -EINVAL;
+}
+
 static int rzg3s_pin_to_oen_bit(const struct rzg2l_hwcfg *hwcfg, u32 caps, u32 port, u8 pin)
 {
 	u8 bit = pin * 2;
@@ -1608,7 +1625,7 @@  static const u64 r9a07g044_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
-	RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+	RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0) | PIN_CFG_OEN),
 	RZG2L_GPIO_PORT_PACK(2, 0x25, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(2, 0x26, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(2, 0x27, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
@@ -1617,7 +1634,7 @@  static const u64 r9a07g044_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(2, 0x2a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(2, 0x2b, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(2, 0x2c, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
-	RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+	RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1) | PIN_CFG_OEN),
 	RZG2L_GPIO_PORT_PACK(2, 0x2e, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
 	RZG2L_GPIO_PORT_PACK(2, 0x2f, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
 	RZG2L_GPIO_PORT_PACK(2, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
@@ -1641,13 +1658,13 @@  static const u64 r9a07g044_gpio_configs[] = {
 
 static const u64 r9a07g043_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(4, 0x10, RZG2L_MPXED_PIN_FUNCS),
-	RZG2L_GPIO_PORT_PACK(5, 0x11, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+	RZG2L_GPIO_PORT_PACK(5, 0x11, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0) | PIN_CFG_OEN),
 	RZG2L_GPIO_PORT_PACK(4, 0x12, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(4, 0x13, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(6, 0x14, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
 	RZG2L_GPIO_PORT_PACK(5, 0x15, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(5, 0x16, RZG2L_MPXED_PIN_FUNCS),
-	RZG2L_GPIO_PORT_PACK(5, 0x17, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+	RZG2L_GPIO_PORT_PACK(5, 0x17, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1) | PIN_CFG_OEN),
 	RZG2L_GPIO_PORT_PACK(5, 0x18, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
 	RZG2L_GPIO_PORT_PACK(4, 0x19, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
 	RZG2L_GPIO_PORT_PACK(5, 0x1a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
@@ -2633,6 +2650,7 @@  static const struct rzg2l_hwcfg rzg2l_hwcfg = {
 		[RZG2L_IOLH_IDX_3V3] = 2000, 4000, 8000, 12000,
 	},
 	.iolh_groupb_oi = { 100, 66, 50, 33, },
+	.oen_max_pin = 0,
 };
 
 static const struct rzg2l_hwcfg rzg3s_hwcfg = {
@@ -2675,6 +2693,7 @@  static struct rzg2l_pinctrl_data r9a07g043_data = {
 	.n_port_pins = ARRAY_SIZE(r9a07g043_gpio_configs) * RZG2L_PINS_PER_PORT,
 	.n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common),
 	.hwcfg = &rzg2l_hwcfg,
+	.pin_to_oen_bit = rzg2l_pin_to_oen_bit,
 #ifdef CONFIG_RISCV
 	.variable_pin_cfg = r9a07g043f_variable_pin_cfg,
 	.n_variable_pin_cfg = ARRAY_SIZE(r9a07g043f_variable_pin_cfg),
@@ -2690,6 +2709,7 @@  static struct rzg2l_pinctrl_data r9a07g044_data = {
 	.n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common) +
 		ARRAY_SIZE(rzg2l_dedicated_pins.rzg2l_pins),
 	.hwcfg = &rzg2l_hwcfg,
+	.pin_to_oen_bit = rzg2l_pin_to_oen_bit,
 };
 
 static struct rzg2l_pinctrl_data r9a08g045_data = {