diff mbox series

[v4,3/3] Input: novatek-nvt-ts: add support for NT36672A touchscreen

Message ID 20240601-nvt-ts-devicetree-regulator-support-v4-3-e0c0174464c4@gmail.com
State New
Headers show
Series novatek-nvt-ts: add support for NT36672A touchscreen | expand

Commit Message

Joel Selvaraj via B4 Relay June 1, 2024, 3:30 p.m. UTC 
From: Joel Selvaraj <joelselvaraj.oss@gmail.com>

Extend the novatek touchscreen driver to support NT36672A chip which
is found in phones like qcom/sdm845-xiaomi-beryllium-tianma.dts.
Added devicetree support for the driver and used i2c chip data to handle
the variation in chip id and wake type. Also added vcc and iovcc
regulators which are used to power the touchscreen hardware.

Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
---
 drivers/input/touchscreen/novatek-nvt-ts.c | 70 +++++++++++++++++++++++++++---
 1 file changed, 64 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/novatek-nvt-ts.c b/drivers/input/touchscreen/novatek-nvt-ts.c
index 9bee3a0c122fb..c24c33f609eb8 100644
--- a/drivers/input/touchscreen/novatek-nvt-ts.c
+++ b/drivers/input/touchscreen/novatek-nvt-ts.c
@@ -31,9 +31,6 @@ 
 #define NVT_TS_PARAMS_CHIP_ID		0x0e
 #define NVT_TS_PARAMS_SIZE		0x0f
 
-#define NVT_TS_SUPPORTED_WAKE_TYPE	0x05
-#define NVT_TS_SUPPORTED_CHIP_ID	0x05
-
 #define NVT_TS_MAX_TOUCHES		10
 #define NVT_TS_MAX_SIZE			4096
 
@@ -51,11 +48,18 @@  static const int nvt_ts_irq_type[4] = {
 	IRQF_TRIGGER_HIGH
 };
 
+struct nvt_ts_i2c_chip_data {
+	u8 wake_type;
+	u8 chip_id;
+};
+
 struct nvt_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input;
 	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data regulators[2];
 	struct touchscreen_properties prop;
+	const struct nvt_ts_i2c_chip_data *chip;
 	int max_touches;
 	u8 buf[NVT_TS_TOUCH_SIZE * NVT_TS_MAX_TOUCHES];
 };
@@ -142,6 +146,13 @@  static irqreturn_t nvt_ts_irq(int irq, void *dev_id)
 static int nvt_ts_start(struct input_dev *dev)
 {
 	struct nvt_ts_data *data = input_get_drvdata(dev);
+	int error;
+
+	error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), data->regulators);
+	if (error) {
+		dev_err(&data->client->dev, "failed to enable regulators\n");
+		return error;
+	}
 
 	enable_irq(data->client->irq);
 	gpiod_set_value_cansleep(data->reset_gpio, 0);
@@ -155,6 +166,7 @@  static void nvt_ts_stop(struct input_dev *dev)
 
 	disable_irq(data->client->irq);
 	gpiod_set_value_cansleep(data->reset_gpio, 1);
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
 }
 
 static int nvt_ts_suspend(struct device *dev)
@@ -199,9 +211,31 @@  static int nvt_ts_probe(struct i2c_client *client)
 	if (!data)
 		return -ENOMEM;
 
+	data->chip = device_get_match_data(&client->dev);
+	if (!data->chip)
+		return -EINVAL;
+
 	data->client = client;
 	i2c_set_clientdata(client, data);
 
+	/*
+	 * VCC is the analog voltage supply
+	 * IOVCC is the digital voltage supply
+	 */
+	data->regulators[0].supply = "vcc";
+	data->regulators[1].supply = "iovcc";
+	error = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators), data->regulators);
+	if (error) {
+		dev_err(dev, "cannot get regulators: %d\n", error);
+		return error;
+	}
+
+	error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), data->regulators);
+	if (error) {
+		dev_err(dev, "failed to enable regulators: %d\n", error);
+		return error;
+	}
+
 	data->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 	error = PTR_ERR_OR_ZERO(data->reset_gpio);
 	if (error) {
@@ -216,6 +250,11 @@  static int nvt_ts_probe(struct i2c_client *client)
 	gpiod_set_value_cansleep(data->reset_gpio, 1); /* Put back in reset */
 	if (error)
 		return error;
+	error = regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
+	if (error) {
+		dev_err(dev, "failed to disable regulators: %d\n", error);
+		return error;
+	}
 
 	width  = get_unaligned_be16(&data->buf[NVT_TS_PARAMS_WIDTH]);
 	height = get_unaligned_be16(&data->buf[NVT_TS_PARAMS_HEIGHT]);
@@ -225,8 +264,8 @@  static int nvt_ts_probe(struct i2c_client *client)
 	if (width > NVT_TS_MAX_SIZE || height >= NVT_TS_MAX_SIZE ||
 	    data->max_touches > NVT_TS_MAX_TOUCHES ||
 	    irq_type >= ARRAY_SIZE(nvt_ts_irq_type) ||
-	    data->buf[NVT_TS_PARAMS_WAKE_TYPE] != NVT_TS_SUPPORTED_WAKE_TYPE ||
-	    data->buf[NVT_TS_PARAMS_CHIP_ID] != NVT_TS_SUPPORTED_CHIP_ID) {
+	    data->buf[NVT_TS_PARAMS_WAKE_TYPE] != data->chip->wake_type ||
+	    data->buf[NVT_TS_PARAMS_CHIP_ID] != data->chip->chip_id) {
 		dev_err(dev, "Unsupported touchscreen parameters: %*ph\n",
 			NVT_TS_PARAMS_SIZE, data->buf);
 		return -EIO;
@@ -277,8 +316,26 @@  static int nvt_ts_probe(struct i2c_client *client)
 	return 0;
 }
 
+static const struct nvt_ts_i2c_chip_data nvt_nt11205_ts_data = {
+	.wake_type = 0x05,
+	.chip_id = 0x05,
+};
+
+static const struct nvt_ts_i2c_chip_data nvt_nt36672a_ts_data = {
+	.wake_type = 0x01,
+	.chip_id = 0x08,
+};
+
+static const struct of_device_id nvt_ts_of_match[] = {
+	{ .compatible = "novatek,nt11205-ts", .data = &nvt_nt11205_ts_data },
+	{ .compatible = "novatek,nt36672a-ts", .data = &nvt_nt36672a_ts_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, nvt_ts_of_match);
+
 static const struct i2c_device_id nvt_ts_i2c_id[] = {
-	{ "nt11205-ts" },
+	{ "nt11205-ts", (unsigned long) &nvt_nt11205_ts_data },
+	{ "nt36672a-ts", (unsigned long) &nvt_nt36672a_ts_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, nvt_ts_i2c_id);
@@ -287,6 +344,7 @@  static struct i2c_driver nvt_ts_driver = {
 	.driver = {
 		.name	= "novatek-nvt-ts",
 		.pm	= pm_sleep_ptr(&nvt_ts_pm_ops),
+		.of_match_table = nvt_ts_of_match,
 	},
 	.probe = nvt_ts_probe,
 	.id_table = nvt_ts_i2c_id,