diff mbox series

[v3,1/3] compress/uadk: Introduce UADK compression driver

Message ID 20240611070726.468-2-zhangfei.gao@linaro.org
State New
Headers show
Series Introduce UADK compression driver | expand

Commit Message

Zhangfei Gao June 11, 2024, 7:07 a.m. UTC
Introduce a new compression & decompression PMD for hardware accelerators
based on UADK [1].

UADK is a framework for user applications to access hardware accelerators.
UADK relies on IOMMU SVA (Shared Virtual Address) feature, which shares
the same page table between IOMMU and MMU.
Thereby user application can directly use the virtual address for the
device DMA, which enhances the performance as well as easy usability.

This patch adds the basic framework.

[1] https://github.com/Linaro/uadk

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
 MAINTAINERS                                   |  6 ++
 doc/guides/compressdevs/features/uadk.ini     | 11 +++
 doc/guides/compressdevs/index.rst             |  1 +
 doc/guides/compressdevs/uadk.rst              | 79 +++++++++++++++++++
 drivers/compress/meson.build                  |  1 +
 drivers/compress/uadk/meson.build             | 30 +++++++
 drivers/compress/uadk/uadk_compress_pmd.c     | 75 ++++++++++++++++++
 .../compress/uadk/uadk_compress_pmd_private.h | 20 +++++
 8 files changed, 223 insertions(+)
 create mode 100644 doc/guides/compressdevs/features/uadk.ini
 create mode 100644 doc/guides/compressdevs/uadk.rst
 create mode 100644 drivers/compress/uadk/meson.build
 create mode 100644 drivers/compress/uadk/uadk_compress_pmd.c
 create mode 100644 drivers/compress/uadk/uadk_compress_pmd_private.h
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index c9adff9846..8e541d23e5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1213,6 +1213,12 @@  F: drivers/compress/octeontx/
 F: doc/guides/compressdevs/octeontx.rst
 F: doc/guides/compressdevs/features/octeontx.ini
 
+HiSilicon UADK compress
+M: Zhangfei Gao <zhangfei.gao@linaro.org>
+F: drivers/compress/uadk/
+F: doc/guides/compressdevs/uadk.rst
+F: doc/guides/compressdevs/features/uadk.ini
+
 Intel QuickAssist
 M: Kai Ji <kai.ji@intel.com>
 F: drivers/compress/qat/
diff --git a/doc/guides/compressdevs/features/uadk.ini b/doc/guides/compressdevs/features/uadk.ini
new file mode 100644
index 0000000000..0bbdb6c5cf
--- /dev/null
+++ b/doc/guides/compressdevs/features/uadk.ini
@@ -0,0 +1,11 @@ 
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; Supported features of 'uadk' compression driver.
+;
+[Features]
+HW Accelerated = Y
+Deflate        = Y
+Crc32          = N
+Fixed          = Y
+Dynamic        = Y
diff --git a/doc/guides/compressdevs/index.rst b/doc/guides/compressdevs/index.rst
index 849f211688..87ed4f72a4 100644
--- a/doc/guides/compressdevs/index.rst
+++ b/doc/guides/compressdevs/index.rst
@@ -15,4 +15,5 @@  Compression Device Drivers
     nitrox
     octeontx
     qat_comp
+    uadk
     zlib
diff --git a/doc/guides/compressdevs/uadk.rst b/doc/guides/compressdevs/uadk.rst
new file mode 100644
index 0000000000..02fa3c7667
--- /dev/null
+++ b/doc/guides/compressdevs/uadk.rst
@@ -0,0 +1,79 @@ 
+.. SPDX-License-Identifier: BSD-3-Clause
+   Copyright 2024-2025 Huawei Technologies Co.,Ltd. All rights reserved.
+   Copyright 2024-2025 Linaro ltd.
+
+UADK Compression Poll Mode Driver
+=================================
+
+UADK compression PMD provides poll mode compression & decompression driver
+All compression operations are using UADK library compression API, which is
+algorithm-level API, abstracting accelerators' low-level implementations.
+
+UADK compression PMD relies on `UADK library <https://github.com/Linaro/uadk>`_.
+
+UADK is a framework for user applications to access hardware accelerators.
+UADK relies on IOMMU SVA (Shared Virtual Address) feature,
+which shares the same page table between IOMMU and MMU.
+As a result, the user application can directly use the virtual address for
+device DMA, which enhances performance as well as easy usability.
+
+
+Features
+--------
+
+UADK compression PMD has support for:
+
+Compression/Decompression algorithm:
+
+    * DEFLATE - using Fixed and Dynamic Huffman encoding
+
+Window size support:
+
+    * 32K
+
+
+Test steps
+----------
+
+#. Build UADK
+
+   .. code-block:: console
+
+      git clone https://github.com/Linaro/uadk.git
+      cd uadk
+      mkdir build
+      ./autogen.sh
+      ./configure --prefix=$PWD/build
+      make
+      make install
+
+   .. note::
+
+      Without ``--prefix``, UADK will be installed to ``/usr/local/lib`` by default.
+
+   .. note::
+
+      If get error: "cannot find -lnuma", please install the libnuma-dev.
+
+#. Run pkg-config libwd to ensure env is setup correctly
+
+   .. code-block:: console
+
+      export PKG_CONFIG_PATH=$PWD/build/lib/pkgconfig
+      pkg-config libwd --cflags --libs -I/usr/local/include -L/usr/local/lib -lwd
+
+   .. note::
+
+      export ``PKG_CONFIG_PATH`` is required on demand,
+      not needed if UADK is installed to ``/usr/local/lib``.
+
+#. Build DPDK
+
+   .. code-block:: console
+
+      cd dpdk
+      mkdir build
+      meson setup build (--reconfigure)
+      cd build
+      ninja
+      sudo ninja install
diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build
index b91195b27d..91d7800a4a 100644
--- a/drivers/compress/meson.build
+++ b/drivers/compress/meson.build
@@ -10,6 +10,7 @@  drivers = [
         'mlx5',
         'nitrox',
         'octeontx',
+        'uadk',
         'zlib',
 ]
 
diff --git a/drivers/compress/uadk/meson.build b/drivers/compress/uadk/meson.build
new file mode 100644
index 0000000000..704833bbcf
--- /dev/null
+++ b/drivers/compress/uadk/meson.build
@@ -0,0 +1,30 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2024-2025 Huawei Technologies Co.,Ltd. All rights reserved.
+# Copyright 2024-2025 Linaro ltd.
+
+if not is_linux
+    build = false
+    reason = 'only supported on Linux'
+    subdir_done()
+endif
+
+sources = files(
+        'uadk_compress_pmd.c',
+)
+
+deps += 'bus_vdev'
+dep = dependency('libwd_comp', required: false, method: 'pkg-config')
+if not dep.found()
+	build = false
+	reason = 'missing dependency, "libwd_comp"'
+else
+	ext_deps += dep
+endif
+
+dep = dependency('libwd', required: false, method: 'pkg-config')
+if not dep.found()
+    build = false
+    reason = 'missing dependency, "libwd"'
+else
+    ext_deps += dep
+endif
diff --git a/drivers/compress/uadk/uadk_compress_pmd.c b/drivers/compress/uadk/uadk_compress_pmd.c
new file mode 100644
index 0000000000..6ffc22a0d2
--- /dev/null
+++ b/drivers/compress/uadk/uadk_compress_pmd.c
@@ -0,0 +1,75 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2024-2025 Huawei Technologies Co.,Ltd. All rights reserved.
+ * Copyright 2024-2025 Linaro ltd.
+ */
+
+#include <bus_vdev_driver.h>
+#include <rte_compressdev_pmd.h>
+#include <rte_malloc.h>
+
+#include <uadk/wd_comp.h>
+#include <uadk/wd_sched.h>
+
+#include "uadk_compress_pmd_private.h"
+
+static struct rte_compressdev_ops uadk_compress_pmd_ops;
+
+static int
+uadk_compress_probe(struct rte_vdev_device *vdev)
+{
+	struct rte_compressdev_pmd_init_params init_params = {
+		"",
+		rte_socket_id(),
+	};
+	struct rte_compressdev *compressdev;
+	struct uacce_dev *udev;
+	const char *name;
+
+	udev = wd_get_accel_dev("deflate");
+	if (!udev)
+		return -ENODEV;
+
+	name = rte_vdev_device_name(vdev);
+	if (name == NULL)
+		return -EINVAL;
+
+	compressdev = rte_compressdev_pmd_create(name, &vdev->device,
+			sizeof(struct uadk_compress_priv), &init_params);
+	if (compressdev == NULL) {
+		UADK_LOG(ERR, "driver %s: create failed", init_params.name);
+		return -ENODEV;
+	}
+
+	compressdev->dev_ops = &uadk_compress_pmd_ops;
+	compressdev->dequeue_burst = NULL;
+	compressdev->enqueue_burst = NULL;
+	compressdev->feature_flags = RTE_COMPDEV_FF_HW_ACCELERATED;
+
+	return 0;
+}
+
+static int
+uadk_compress_remove(struct rte_vdev_device *vdev)
+{
+	struct rte_compressdev *compressdev;
+	const char *name;
+
+	name = rte_vdev_device_name(vdev);
+	if (name == NULL)
+		return -EINVAL;
+
+	compressdev = rte_compressdev_pmd_get_named_dev(name);
+	if (compressdev == NULL)
+		return -ENODEV;
+
+	return rte_compressdev_pmd_destroy(compressdev);
+}
+
+static struct rte_vdev_driver uadk_compress_pmd = {
+	.probe = uadk_compress_probe,
+	.remove = uadk_compress_remove,
+};
+
+#define UADK_COMPRESS_DRIVER_NAME compress_uadk
+RTE_PMD_REGISTER_VDEV(UADK_COMPRESS_DRIVER_NAME, uadk_compress_pmd);
+RTE_LOG_REGISTER_DEFAULT(uadk_compress_logtype, INFO);
diff --git a/drivers/compress/uadk/uadk_compress_pmd_private.h b/drivers/compress/uadk/uadk_compress_pmd_private.h
new file mode 100644
index 0000000000..88e9075619
--- /dev/null
+++ b/drivers/compress/uadk/uadk_compress_pmd_private.h
@@ -0,0 +1,20 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2024-2025 Huawei Technologies Co.,Ltd. All rights reserved.
+ * Copyright 2024-2025 Linaro ltd.
+ */
+
+#ifndef _UADK_COMPRESS_PMD_PRIVATE_H_
+#define _UADK_COMPRESS_PMD_PRIVATE_H_
+
+struct uadk_compress_priv {
+	bool env_init;
+};
+
+extern int uadk_compress_logtype;
+
+#define UADK_LOG(level, fmt, ...)  \
+	rte_log(RTE_LOG_ ## level, uadk_compress_logtype,  \
+		"%s() line %u: " fmt "\n", __func__, __LINE__,  \
+		## __VA_ARGS__)
+
+#endif /* _UADK_COMPRESS_PMD_PRIVATE_H_ */