| Message ID | 20240612203735.4108690-4-bvanassche@acm.org |
|---|---|
| State | New |
| Headers | show |
| Series | Do not read the IO hints VPD page from USB storage devices | expand |
On Wed, Jun 12, 2024 at 10:37 PM Bart Van Assche <bvanassche@acm.org> wrote: > > Recently it was reported that the following USB storage devices are unusable > with Linux kernel 6.9: > * Kingston DataTraveler G2 > * Garmin FR35 > > This is because attempting to read the IO hint VPD page causes these devices > to reset. Hence do not read the IO hint VPD page from USB storage devices. I have commented on v1, same applicable here. Not that it's a big deal for this change, but in general can you follow the advice given there?
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index b31464740f6c..b4cf0349fd0d 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -79,6 +79,12 @@ static int slave_alloc (struct scsi_device *sdev) if (us->protocol == USB_PR_BULK && us->max_lun > 0) sdev->sdev_bflags |= BLIST_FORCELUN; + /* + * Some USB storage devices reset if the IO hints VPD page is queried. + * Hence skip that VPD page. + */ + sdev->sdev_bflags |= BLIST_SKIP_IO_HINTS; + return 0; } diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index a48870a87a29..77fdfb6a90c8 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -21,6 +21,7 @@ #include <scsi/scsi.h> #include <scsi/scsi_eh.h> #include <scsi/scsi_dbg.h> +#include <scsi/scsi_devinfo.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_device.h> #include <scsi/scsi_host.h> @@ -820,6 +821,12 @@ static int uas_slave_alloc(struct scsi_device *sdev) struct uas_dev_info *devinfo = (struct uas_dev_info *)sdev->host->hostdata; + /* + * Some USB storage devices reset if the IO hints VPD page is queried. + * Hence skip that VPD page. + */ + sdev->sdev_bflags |= BLIST_SKIP_IO_HINTS; + sdev->hostdata = devinfo; return 0; }
Recently it was reported that the following USB storage devices are unusable with Linux kernel 6.9: * Kingston DataTraveler G2 * Garmin FR35 This is because attempting to read the IO hint VPD page causes these devices to reset. Hence do not read the IO hint VPD page from USB storage devices. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Cc: Joao Machado <jocrismachado@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Christian Heusel <christian@heusel.eu> Cc: stable@vger.kernel.org Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information") Reported-by: Joao Machado <jocrismachado@gmail.com> Closes: https://lore.kernel.org/linux-scsi/20240130214911.1863909-1-bvanassche@acm.org/T/#mf4e3410d8f210454d7e4c3d1fb5c0f41e651b85f Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Bisected-by: Christian Heusel <christian@heusel.eu> Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Closes: https://lore.kernel.org/linux-scsi/CACLx9VdpUanftfPo2jVAqXdcWe8Y43MsDeZmMPooTzVaVJAh2w@mail.gmail.com/ Signed-off-by: Bart Van Assche <bvanassche@acm.org> --- drivers/usb/storage/scsiglue.c | 6 ++++++ drivers/usb/storage/uas.c | 7 +++++++ 2 files changed, 13 insertions(+)