@@ -32,14 +32,15 @@ config USB4_DEBUGFS_WRITE
this for production systems or distro kernels.
config USB4_DEBUGFS_MARGINING
- bool "Expose receiver lane margining operations under USB4 ports (DANGEROUS)"
+ bool "Expose receiver lane margining operations under USB4 ports and retimers (DANGEROUS)"
depends on DEBUG_FS
depends on USB4_DEBUGFS_WRITE
help
- Enables hardware and software based receiver lane margining support
- under each USB4 port. Used for electrical quality and robustness
- validation during manufacturing. Should not be enabled by distro
- kernels.
+ Enables hardware and software based receiver lane margining
+ support under each USB4 port and retimer, including retimers
+ on the other side of the cable. Used for electrical quality
+ and robustness validation during manufacturing. Should not be
+ enabled by distro kernels.
config USB4_KUNIT_TEST
bool "KUnit tests" if !KUNIT_ALL_TESTS
@@ -380,6 +380,9 @@ static ssize_t retimer_sb_regs_write(struct file *file,
/**
* struct tb_margining - Lane margining support
* @port: USB4 port through which the margining operations are run
+ * @target: Sideband target
+ * @index: Retimer index if taget is %USB4_SB_TARGET_RETIMER
+ * @dev: Pointer to the device that is the target (USB4 port or retimer)
* @caps: Port lane margining capabilities
* @results: Last lane margining results
* @lanes: %0, %1 or %7 (all)
@@ -397,6 +400,9 @@ static ssize_t retimer_sb_regs_write(struct file *file,
*/
struct tb_margining {
struct tb_port *port;
+ enum usb4_sb_target target;
+ u8 index;
+ struct device *dev;
u32 caps[2];
u32 results[2];
unsigned int lanes;
@@ -736,6 +742,7 @@ static int margining_run_write(void *data, u64 val)
{
struct tb_margining *margining = data;
struct tb_port *port = margining->port;
+ struct device *dev = margining->dev;
struct tb_switch *sw = port->sw;
struct tb_switch *down_sw;
struct tb *tb = sw->tb;
@@ -744,7 +751,7 @@ static int margining_run_write(void *data, u64 val)
if (val != 1)
return -EINVAL;
- pm_runtime_get_sync(&sw->dev);
+ pm_runtime_get_sync(dev);
if (mutex_lock_interruptible(&tb->lock)) {
ret = -ERESTARTSYS;
@@ -772,24 +779,29 @@ static int margining_run_write(void *data, u64 val)
}
if (margining->software) {
- tb_port_dbg(port, "running software %s lane margining for lanes %u\n",
- margining->time ? "time" : "voltage", margining->lanes);
- ret = usb4_port_sw_margin(port, USB4_SB_TARGET_ROUTER, 0,
+ tb_port_dbg(port,
+ "running software %s lane margining for %s lanes %u\n",
+ margining->time ? "time" : "voltage", dev_name(dev),
+ margining->lanes);
+ ret = usb4_port_sw_margin(port, margining->target, margining->index,
margining->lanes, margining->time,
margining->right_high,
USB4_MARGIN_SW_COUNTER_CLEAR);
if (ret)
goto out_clx;
- ret = usb4_port_sw_margin_errors(port, USB4_SB_TARGET_ROUTER, 0,
+ ret = usb4_port_sw_margin_errors(port, margining->target,
+ margining->index,
&margining->results[0]);
} else {
- tb_port_dbg(port, "running hardware %s lane margining for lanes %u\n",
- margining->time ? "time" : "voltage", margining->lanes);
+ tb_port_dbg(port,
+ "running hardware %s lane margining for %s lanes %u\n",
+ margining->time ? "time" : "voltage", dev_name(dev),
+ margining->lanes);
/* Clear the results */
margining->results[0] = 0;
margining->results[1] = 0;
- ret = usb4_port_hw_margin(port, USB4_SB_TARGET_ROUTER, 0,
+ ret = usb4_port_hw_margin(port, margining->target, margining->index,
margining->lanes, margining->ber_level,
margining->time, margining->right_high,
margining->results);
@@ -801,8 +813,8 @@ static int margining_run_write(void *data, u64 val)
out_unlock:
mutex_unlock(&tb->lock);
out_rpm_put:
- pm_runtime_mark_last_busy(&sw->dev);
- pm_runtime_put_autosuspend(&sw->dev);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
return ret;
}
@@ -1044,33 +1056,29 @@ static int margining_margin_show(struct seq_file *s, void *not_used)
}
DEBUGFS_ATTR_RW(margining_margin);
-static void margining_port_init(struct tb_port *port)
+static struct tb_margining *margining_alloc(struct tb_port *port,
+ struct device *dev,
+ enum usb4_sb_target target,
+ u8 index, struct dentry *parent)
{
struct tb_margining *margining;
- struct dentry *dir, *parent;
- struct usb4_port *usb4;
- char dir_name[10];
+ struct dentry *dir;
unsigned int val;
int ret;
- usb4 = port->usb4;
- if (!usb4)
- return;
-
- snprintf(dir_name, sizeof(dir_name), "port%d", port->port);
- parent = debugfs_lookup(dir_name, port->sw->debugfs_dir);
-
margining = kzalloc(sizeof(*margining), GFP_KERNEL);
if (!margining)
- return;
+ return NULL;
margining->port = port;
+ margining->target = target;
+ margining->index = index;
+ margining->dev = dev;
- ret = usb4_port_margining_caps(port, USB4_SB_TARGET_ROUTER, 0,
- margining->caps);
+ ret = usb4_port_margining_caps(port, target, index, margining->caps);
if (ret) {
kfree(margining);
- return;
+ return NULL;
}
/* Set the initial mode */
@@ -1124,8 +1132,22 @@ static void margining_port_init(struct tb_port *port)
independent_time_margins(margining) == USB4_MARGIN_CAP_1_TIME_LR))
debugfs_create_file("margin", 0600, dir, margining,
&margining_margin_fops);
+ return margining;
+}
- usb4->margining = margining;
+static void margining_port_init(struct tb_port *port)
+{
+ struct dentry *parent;
+ char dir_name[10];
+
+ if (!port->usb4)
+ return;
+
+ snprintf(dir_name, sizeof(dir_name), "port%d", port->port);
+ parent = debugfs_lookup(dir_name, port->sw->debugfs_dir);
+ port->usb4->margining = margining_alloc(port, &port->usb4->dev,
+ USB4_SB_TARGET_ROUTER, 0,
+ parent);
}
static void margining_port_remove(struct tb_port *port)
@@ -1199,11 +1221,27 @@ static void margining_xdomain_remove(struct tb_xdomain *xd)
downstream = tb_port_at(xd->route, parent_sw);
margining_port_remove(downstream);
}
+
+static void margining_retimer_init(struct tb_retimer *rt, struct dentry *debugfs_dir)
+{
+ rt->margining = margining_alloc(rt->port, &rt->dev,
+ USB4_SB_TARGET_RETIMER, rt->index,
+ debugfs_dir);
+}
+
+static void margining_retimer_remove(struct tb_retimer *rt)
+{
+ kfree(rt->margining);
+ rt->margining = NULL;
+}
#else
static inline void margining_switch_init(struct tb_switch *sw) { }
static inline void margining_switch_remove(struct tb_switch *sw) { }
static inline void margining_xdomain_init(struct tb_xdomain *xd) { }
static inline void margining_xdomain_remove(struct tb_xdomain *xd) { }
+static inline void margining_retimer_init(struct tb_retimer *rt,
+ struct dentry *debugfs_dir) { }
+static inline void margining_retimer_remove(struct tb_retimer *rt) { }
#endif
static int port_clear_all_counters(struct tb_port *port)
@@ -1864,6 +1902,7 @@ void tb_retimer_debugfs_init(struct tb_retimer *rt)
debugfs_dir = debugfs_create_dir(dev_name(&rt->dev), tb_debugfs_root);
debugfs_create_file("sb_regs", DEBUGFS_MODE, debugfs_dir, rt,
&retimer_sb_regs_fops);
+ margining_retimer_init(rt, debugfs_dir);
}
/**
@@ -1875,6 +1914,7 @@ void tb_retimer_debugfs_init(struct tb_retimer *rt)
void tb_retimer_debugfs_remove(struct tb_retimer *rt)
{
debugfs_lookup_and_remove(dev_name(&rt->dev), tb_debugfs_root);
+ margining_retimer_remove(rt);
}
void tb_debugfs_init(void)
@@ -14,7 +14,11 @@
#include "sb_regs.h"
#include "tb.h"
+#if IS_ENABLED(CONFIG_USB4_DEBUGFS_MARGINING)
#define TB_MAX_RETIMER_INDEX 6
+#else
+#define TB_MAX_RETIMER_INDEX 2
+#endif
/**
* tb_retimer_nvm_read() - Read contents of retimer NVM
@@ -319,6 +323,8 @@ static ssize_t nvm_version_show(struct device *dev,
if (!rt->nvm)
ret = -EAGAIN;
+ else if (rt->no_nvm_upgrade)
+ ret = -EOPNOTSUPP;
else
ret = sysfs_emit(buf, "%x.%x\n", rt->nvm->major, rt->nvm->minor);
@@ -366,7 +372,8 @@ const struct device_type tb_retimer_type = {
.release = tb_retimer_release,
};
-static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status)
+static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status,
+ bool on_board)
{
struct tb_retimer *rt;
u32 vendor, device;
@@ -388,13 +395,6 @@ static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status)
return ret;
}
- /*
- * Check that it supports NVM operations. If not then don't add
- * the device at all.
- */
- ret = usb4_port_retimer_nvm_sector_size(port, index);
- if (ret < 0)
- return ret;
rt = kzalloc(sizeof(*rt), GFP_KERNEL);
if (!rt)
@@ -407,6 +407,13 @@ static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status)
rt->port = port;
rt->tb = port->sw->tb;
+ /*
+ * Only support NVM upgrade for on-board retimers. The retimers
+ * on the other side of the connection.
+ */
+ if (!on_board || usb4_port_retimer_nvm_sector_size(port, index) <= 0)
+ rt->no_nvm_upgrade = true;
+
rt->dev.parent = &port->usb4->dev;
rt->dev.bus = &tb_bus_type;
rt->dev.type = &tb_retimer_type;
@@ -487,7 +494,7 @@ static struct tb_retimer *tb_port_find_retimer(struct tb_port *port, u8 index)
int tb_retimer_scan(struct tb_port *port, bool add)
{
u32 status[TB_MAX_RETIMER_INDEX + 1] = {};
- int ret, i, last_idx = 0;
+ int ret, i, max, last_idx = 0;
/*
* Send broadcast RT to make sure retimer indices facing this
@@ -522,26 +529,28 @@ int tb_retimer_scan(struct tb_port *port, bool add)
break;
}
- tb_retimer_unset_inbound_sbtx(port);
-
- if (!last_idx)
- return 0;
-
- /* Add on-board retimers if they do not exist already */
+ max = i;
ret = 0;
- for (i = 1; i <= last_idx; i++) {
+
+ /* Add retimers if they do not exist already */
+ for (i = 1; i <= max; i++) {
struct tb_retimer *rt;
+ /* Skip cable retimers */
+ if (usb4_port_retimer_is_cable(port, i))
+ continue;
+
rt = tb_port_find_retimer(port, i);
if (rt) {
put_device(&rt->dev);
} else if (add) {
- ret = tb_retimer_add(port, i, status[i]);
+ ret = tb_retimer_add(port, i, status[i], i <= last_idx);
if (ret && ret != -EOPNOTSUPP)
break;
}
}
+ tb_retimer_unset_inbound_sbtx(port);
return ret;
}
@@ -26,6 +26,7 @@ enum usb4_sb_opcode {
USB4_SB_OPCODE_SET_INBOUND_SBTX = 0x5055534c, /* "LSUP" */
USB4_SB_OPCODE_UNSET_INBOUND_SBTX = 0x50555355, /* "USUP" */
USB4_SB_OPCODE_QUERY_LAST_RETIMER = 0x5453414c, /* "LAST" */
+ USB4_SB_OPCODE_QUERY_CABLE_RETIMER = 0x524c4243, /* "CBLR" */
USB4_SB_OPCODE_GET_NVM_SECTOR_SIZE = 0x53534e47, /* "GNSS" */
USB4_SB_OPCODE_NVM_SET_OFFSET = 0x53504f42, /* "BOPS" */
USB4_SB_OPCODE_NVM_BLOCK_WRITE = 0x574b4c42, /* "BLKW" */
@@ -329,6 +329,7 @@ struct usb4_port {
* @nvm: Pointer to the NVM if the retimer has one (%NULL otherwise)
* @no_nvm_upgrade: Prevent NVM upgrade of this retimer
* @auth_status: Status of last NVM authentication
+ * @margining: Pointer to margining structure if enabled
*/
struct tb_retimer {
struct device dev;
@@ -340,6 +341,9 @@ struct tb_retimer {
struct tb_nvm *nvm;
bool no_nvm_upgrade;
u32 auth_status;
+#ifdef CONFIG_USB4_DEBUGFS_MARGINING
+ struct tb_margining *margining;
+#endif
};
/**
@@ -1363,6 +1367,7 @@ int usb4_port_sw_margin_errors(struct tb_port *port, enum usb4_sb_target target,
int usb4_port_retimer_set_inbound_sbtx(struct tb_port *port, u8 index);
int usb4_port_retimer_unset_inbound_sbtx(struct tb_port *port, u8 index);
int usb4_port_retimer_is_last(struct tb_port *port, u8 index);
+int usb4_port_retimer_is_cable(struct tb_port *port, u8 index);
int usb4_port_retimer_nvm_sector_size(struct tb_port *port, u8 index);
int usb4_port_retimer_nvm_set_offset(struct tb_port *port, u8 index,
unsigned int address);
@@ -1830,6 +1830,30 @@ int usb4_port_retimer_is_last(struct tb_port *port, u8 index)
return ret ? ret : metadata & 1;
}
+/**
+ * usb4_port_retimer_is_cable() - Is the retimer cable retimer
+ * @port: USB4 port
+ * @index: Retimer index
+ *
+ * If the retimer at @index is last cable retimer this function returns
+ * %1 and %0 if it is on-board retimer. In case a retimer is not present
+ * at @index returns %-ENODEV. Otherwise returns negative errno.
+ */
+int usb4_port_retimer_is_cable(struct tb_port *port, u8 index)
+{
+ u32 metadata;
+ int ret;
+
+ ret = usb4_port_retimer_op(port, index, USB4_SB_OPCODE_QUERY_CABLE_RETIMER,
+ 500);
+ if (ret)
+ return ret;
+
+ ret = usb4_port_sb_read(port, USB4_SB_TARGET_RETIMER, index,
+ USB4_SB_METADATA, &metadata, sizeof(metadata));
+ return ret ? ret : metadata & 1;
+}
+
/**
* usb4_port_retimer_nvm_sector_size() - Read retimer NVM sector size
* @port: USB4 port
Retimers support lane margining as well so make this available through debugfs in the same way as we do for the USB4 ports. When this is enabled we also expose retimers on the other side of the cable because typically margining is implemented only on direction towards the cable. However, for the retimers on the other side of the cable we do not allow NVM upgrade to avoid confusing the existing userspace (the same retimer may now appear twice with different name) and is probably not a good idea anyway. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> --- drivers/thunderbolt/Kconfig | 11 +++-- drivers/thunderbolt/debugfs.c | 92 +++++++++++++++++++++++++---------- drivers/thunderbolt/retimer.c | 43 +++++++++------- drivers/thunderbolt/sb_regs.h | 1 + drivers/thunderbolt/tb.h | 5 ++ drivers/thunderbolt/usb4.c | 24 +++++++++ 6 files changed, 128 insertions(+), 48 deletions(-)