diff mbox series

arm64: dts: qcom: msm8916-gplus-fl8005a: Add sound and modem

Message ID 20240619111523.54301-1-linmengbo06890@proton.me
State New
Headers show
Series arm64: dts: qcom: msm8916-gplus-fl8005a: Add sound and modem | expand

Commit Message

Lin, Meng-Bo June 19, 2024, 11:15 a.m. UTC 
Enable sound and modem for the GPLUS FL8005A.
The setup is similar to most MSM8916 devices, i.e.:

 - QDSP6 audio
 - Earpiece/headphones/microphones via digital/analog codec in
   MSM8916/PM8916
 - WWAN Internet via BAM-DMUX

Signed-off-by: "Lin, Meng-Bo" <linmengbo06890@proton.me>
---
 .../boot/dts/qcom/msm8916-gplus-fl8005a.dts   | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
index b748d140b52e..e6ed5544a11b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -3,6 +3,7 @@ 
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -111,6 +112,17 @@  &blsp_uart2 {
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <150 180 237 450 500>;
+	qcom,mbhc-vthreshold-high = <150 180 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -141,6 +153,14 @@  &sdhc_2 {
 	status = "okay";
 };
 
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	extcon = <&usb_id>, <&usb_id>;
 	status = "okay";