diff mbox series

[v2,10/14] drm/bridge: analogix_dp: move macro reset after link bandwidth setting

Message ID 20240619182200.3752465-10-l.stach@pengutronix.de
State New
Headers show
Series None | expand

Commit Message

Lucas Stach June 19, 2024, 6:21 p.m. UTC 
Setting the link bandwidth may change the PLL parameters, which will cause
the PLL to go out of lock, so make sure to apply the MACRO_RST, which
according to the comment is required to be pulsed after the PLL is locked.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de> (rk3288-veyron and rk3399-gru)
---
 .../gpu/drm/bridge/analogix/analogix_dp_core.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index bbf2c0808ace..d2c7a9117ce3 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -243,6 +243,11 @@  static int analogix_dp_link_start(struct analogix_dp_device *dp)
 
 	/* Set link rate and count as you want to establish*/
 	analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
+	/*
+	 * MACRO_RST must be applied after the PLL_LOCK to avoid
+	 * the DP inter pair skew issue for at least 10 us
+	 */
+	analogix_dp_reset_macro(dp);
 	analogix_dp_set_lane_count(dp, dp->link_train.lane_count);
 
 	/* Setup RX configuration */
@@ -562,12 +567,6 @@  static int analogix_dp_full_link_train(struct analogix_dp_device *dp,
 	int retval = 0;
 	bool training_finished = false;
 
-	/*
-	 * MACRO_RST must be applied after the PLL_LOCK to avoid
-	 * the DP inter pair skew issue for at least 10 us
-	 */
-	analogix_dp_reset_macro(dp);
-
 	/* Initialize by reading RX's DPCD */
 	analogix_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
 	analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
@@ -634,9 +633,12 @@  static int analogix_dp_fast_link_train(struct analogix_dp_device *dp)
 	u8 link_align, link_status[2];
 	enum pll_status status;
 
-	analogix_dp_reset_macro(dp);
-
 	analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
+	/*
+	 * MACRO_RST must be applied after the PLL_LOCK to avoid
+	 * the DP inter pair skew issue for at least 10 us
+	 */
+	analogix_dp_reset_macro(dp);
 	analogix_dp_set_lane_count(dp, dp->link_train.lane_count);
 	analogix_dp_set_lane_link_training(dp);