@@ -135,12 +135,6 @@ static void lp5521_load_engine(struct lp55xx_chip *chip)
lp5521_wait_opmode_done();
}
-static void lp5521_stop_all_engines(struct lp55xx_chip *chip)
-{
- lp55xx_write(chip, LP5521_REG_OP_MODE, 0);
- lp5521_wait_opmode_done();
-}
-
static void lp5521_stop_engine(struct lp55xx_chip *chip)
{
enum lp55xx_engine_index idx = chip->engine_idx;
@@ -499,6 +493,9 @@ static const struct attribute_group lp5521_group = {
/* Chip specific configurations */
static struct lp55xx_device_config lp5521_cfg = {
+ .reg_op_mode = {
+ .addr = LP5521_REG_OP_MODE,
+ },
.reset = {
.addr = LP5521_REG_RESET,
.val = LP5521_RESET,
@@ -585,7 +582,7 @@ static void lp5521_remove(struct i2c_client *client)
struct lp55xx_led *led = i2c_get_clientdata(client);
struct lp55xx_chip *chip = led->chip;
- lp5521_stop_all_engines(chip);
+ lp55xx_stop_all_engine(chip);
lp55xx_unregister_sysfs(chip);
lp55xx_deinit_device(chip);
}
@@ -41,7 +41,10 @@
#define LP5523_REG_LED_PWM_BASE 0x16
#define LP5523_REG_LED_CURRENT_BASE 0x26
#define LP5523_REG_CONFIG 0x36
+
#define LP5523_REG_STATUS 0x3A
+#define LP5523_ENGINE_BUSY BIT(4)
+
#define LP5523_REG_RESET 0x3D
#define LP5523_REG_LED_TEST_CTRL 0x41
#define LP5523_REG_LED_TEST_ADC 0x42
@@ -190,12 +193,6 @@ static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip)
lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]);
}
-static void lp5523_stop_all_engines(struct lp55xx_chip *chip)
-{
- lp55xx_write(chip, LP5523_REG_OP_MODE, 0);
- lp5523_wait_opmode_done();
-}
-
static void lp5523_stop_engine(struct lp55xx_chip *chip)
{
enum lp55xx_engine_index idx = chip->engine_idx;
@@ -322,7 +319,7 @@ static int lp5523_init_program_engine(struct lp55xx_chip *chip)
}
out:
- lp5523_stop_all_engines(chip);
+ lp55xx_stop_all_engine(chip);
return ret;
}
@@ -873,6 +870,13 @@ static const struct attribute_group lp5523_group = {
/* Chip specific configurations */
static struct lp55xx_device_config lp5523_cfg = {
+ .reg_op_mode = {
+ .addr = LP5523_REG_OP_MODE,
+ },
+ .engine_busy = {
+ .addr = LP5523_REG_STATUS,
+ .mask = LP5523_ENGINE_BUSY,
+ },
.reset = {
.addr = LP5523_REG_RESET,
.val = LP5523_RESET,
@@ -959,7 +963,7 @@ static void lp5523_remove(struct i2c_client *client)
struct lp55xx_led *led = i2c_get_clientdata(client);
struct lp55xx_chip *chip = led->chip;
- lp5523_stop_all_engines(chip);
+ lp55xx_stop_all_engine(chip);
lp55xx_unregister_sysfs(chip);
lp55xx_deinit_device(chip);
}
@@ -144,12 +144,6 @@ static void lp5562_load_engine(struct lp55xx_chip *chip)
lp5562_wait_opmode_done();
}
-static void lp5562_stop_engine(struct lp55xx_chip *chip)
-{
- lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
- lp5562_wait_opmode_done();
-}
-
static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
{
int ret;
@@ -160,7 +154,7 @@ static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
if (!start) {
lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
lp5562_wait_enable_done();
- lp5562_stop_engine(chip);
+ lp55xx_stop_all_engine(chip);
lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
lp5562_wait_opmode_done();
@@ -369,7 +363,7 @@ static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
return -EINVAL;
}
- lp5562_stop_engine(chip);
+ lp55xx_stop_all_engine(chip);
/* Set LED map as RGB */
lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
@@ -495,6 +489,9 @@ static const struct attribute_group lp5562_group = {
/* Chip specific configurations */
static struct lp55xx_device_config lp5562_cfg = {
.max_channel = LP5562_MAX_LEDS,
+ .reg_op_mode = {
+ .addr = LP5562_REG_OP_MODE,
+ },
.reset = {
.addr = LP5562_REG_RESET,
.val = LP5562_RESET,
@@ -577,7 +574,7 @@ static void lp5562_remove(struct i2c_client *client)
struct lp55xx_led *led = i2c_get_clientdata(client);
struct lp55xx_chip *chip = led->chip;
- lp5562_stop_engine(chip);
+ lp55xx_stop_all_engine(chip);
lp55xx_unregister_sysfs(chip);
lp55xx_deinit_device(chip);
@@ -13,6 +13,7 @@
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
+#include <linux/iopoll.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/platform_data/leds-lp55xx.h>
@@ -22,6 +23,12 @@
#include "leds-lp55xx-common.h"
+/* OP MODE require at least 153 us to clear regs */
+#define LP55XX_CMD_SLEEP 200
+
+/* Program Commands */
+#define LP55xx_MODE_DISABLE_ALL_ENG 0x0
+
/* External clock rate */
#define LP55XX_CLK_32K 32768
@@ -40,6 +47,35 @@ static struct lp55xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev)
return container_of(mc_cdev, struct lp55xx_led, mc_cdev);
}
+static void lp55xx_wait_opmode_done(struct lp55xx_chip *chip)
+{
+ struct lp55xx_device_config *cfg = chip->cfg;
+ int __always_unused ret;
+ u8 val;
+
+ /*
+ * Recent chip supports BUSY bit for engine.
+ * Check support by checking if val is not 0.
+ * For legacy device, sleep at least 153 us.
+ */
+ if (cfg->engine_busy.val) {
+ read_poll_timeout(lp55xx_read, ret, !(val & cfg->engine_busy.mask),
+ LP55XX_CMD_SLEEP, LP55XX_CMD_SLEEP * 10, false,
+ chip, cfg->engine_busy.addr, &val);
+ } else {
+ usleep_range(LP55XX_CMD_SLEEP, LP55XX_CMD_SLEEP * 2);
+ }
+}
+
+void lp55xx_stop_all_engine(struct lp55xx_chip *chip)
+{
+ struct lp55xx_device_config *cfg = chip->cfg;
+
+ lp55xx_write(chip, cfg->reg_op_mode.addr, LP55xx_MODE_DISABLE_ALL_ENG);
+ lp55xx_wait_opmode_done(chip);
+}
+EXPORT_SYMBOL_GPL(lp55xx_stop_all_engine);
+
static void lp55xx_reset_device(struct lp55xx_chip *chip)
{
struct lp55xx_device_config *cfg = chip->cfg;
@@ -81,15 +81,22 @@ struct lp55xx_chip;
/*
* struct lp55xx_reg
* @addr : Register address
- * @val : Register value
+ * @val : Register value (can also used as mask or shift)
*/
struct lp55xx_reg {
u8 addr;
- u8 val;
+ union {
+ u8 val;
+ u8 mask;
+ u8 shift;
+ };
};
/*
* struct lp55xx_device_config
+ * @reg_op_mode : Chip specific OP MODE reg addr
+ * @engine_busy : Chip specific engine busy
+ * (if not supported 153 us sleep)
* @reset : Chip specific reset command
* @enable : Chip specific enable command
* @max_channel : Maximum number of channels
@@ -102,6 +109,8 @@ struct lp55xx_reg {
* @dev_attr_group : Device specific attributes
*/
struct lp55xx_device_config {
+ const struct lp55xx_reg reg_op_mode; /* addr, shift */
+ const struct lp55xx_reg engine_busy; /* addr, mask */
const struct lp55xx_reg reset;
const struct lp55xx_reg enable;
const int max_channel;
@@ -191,6 +200,9 @@ extern int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg,
/* external clock detection */
extern bool lp55xx_is_extclk_used(struct lp55xx_chip *chip);
+/* common chip functions */
+extern void lp55xx_stop_all_engine(struct lp55xx_chip *chip);
+
/* common device init/deinit functions */
extern int lp55xx_init_device(struct lp55xx_chip *chip);
extern void lp55xx_deinit_device(struct lp55xx_chip *chip);
@@ -58,6 +58,9 @@
#define LP8501_INT_CLK BIT(0)
#define LP8501_DEFAULT_CFG (LP8501_PWM_PSAVE | LP8501_AUTO_INC | LP8501_PWR_SAVE)
+#define LP8501_REG_STATUS 0x3A
+#define LP8501_ENGINE_BUSY BIT(4)
+
#define LP8501_REG_RESET 0x3D
#define LP8501_RESET 0xFF
@@ -141,12 +144,6 @@ static void lp8501_load_engine(struct lp55xx_chip *chip)
lp55xx_write(chip, LP8501_REG_PROG_PAGE_SEL, page_sel[idx]);
}
-static void lp8501_stop_engine(struct lp55xx_chip *chip)
-{
- lp55xx_write(chip, LP8501_REG_OP_MODE, 0);
- lp8501_wait_opmode_done();
-}
-
static void lp8501_turn_off_channels(struct lp55xx_chip *chip)
{
int i;
@@ -163,7 +160,7 @@ static void lp8501_run_engine(struct lp55xx_chip *chip, bool start)
/* stop engine */
if (!start) {
- lp8501_stop_engine(chip);
+ lp55xx_stop_all_engine(chip);
lp8501_turn_off_channels(chip);
return;
}
@@ -285,6 +282,13 @@ static int lp8501_led_brightness(struct lp55xx_led *led)
/* Chip specific configurations */
static struct lp55xx_device_config lp8501_cfg = {
+ .reg_op_mode = {
+ .addr = LP8501_REG_OP_MODE,
+ },
+ .engine_busy = {
+ .addr = LP8501_REG_STATUS,
+ .maks = LP8501_ENGINE_BUSY,
+ },
.reset = {
.addr = LP8501_REG_RESET,
.val = LP8501_RESET,
@@ -369,7 +373,7 @@ static void lp8501_remove(struct i2c_client *client)
struct lp55xx_led *led = i2c_get_clientdata(client);
struct lp55xx_chip *chip = led->chip;
- lp8501_stop_engine(chip);
+ lp55xx_stop_all_engine(chip);
lp55xx_unregister_sysfs(chip);
lp55xx_deinit_device(chip);
}
In all the lp55xx based driver, we have a similar implementation of the stop_all_engine function with the only difference of the required sleep for the OP MODE change. The main difference is legacy LEDs require a min of 152 us while new one use a generic 1-2ms. The new one use a 1-2ms sleep as suggested in the datasheet IN ALTERNATIVE to a much more robust approach by using the newly introduced ENGINE_BUSY bit in the STATUS reg. To better handle sleep after OP MODE change, add support for polling the ENGINE_BUSY bit and use the legacy sleep for old LEDs. With this change, stop_all_engine can be generalized and moved to lp55xx-common. To make more clear the double usage of lp55xx_reg, define a union for additional scope of mask and shift. Update all lp55xx based driver to use the new generalized function and define the required bits in the device_config struct. Suggested-by: Lee Jones <lee@kernel.org> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- drivers/leds/leds-lp5521.c | 11 ++++------ drivers/leds/leds-lp5523.c | 20 ++++++++++------- drivers/leds/leds-lp5562.c | 15 ++++++------- drivers/leds/leds-lp55xx-common.c | 36 +++++++++++++++++++++++++++++++ drivers/leds/leds-lp55xx-common.h | 16 ++++++++++++-- drivers/leds/leds-lp8501.c | 20 ++++++++++------- 6 files changed, 84 insertions(+), 34 deletions(-)