deleted file mode 100644
@@ -1,81 +0,0 @@
-Freescale SOC USB controllers
-
-The device node for a USB controller that is part of a Freescale
-SOC is as described in the document "Open Firmware Recommended
-Practice : Universal Serial Bus" with the following modifications
-and additions :
-
-Required properties :
- - compatible : Should be "fsl-usb2-mph" for multi port host USB
- controllers, or "fsl-usb2-dr" for dual role USB controllers
- or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121.
- Wherever applicable, the IP version of the USB controller should
- also be mentioned (for eg. fsl-usb2-dr-v2.2 for bsc9132).
- - phy_type : For multi port host USB controllers, should be one of
- "ulpi", or "serial". For dual role USB controllers, should be
- one of "ulpi", "utmi", "utmi_wide", or "serial".
- - reg : Offset and length of the register set for the device
- - port0 : boolean; if defined, indicates port0 is connected for
- fsl-usb2-mph compatible controllers. Either this property or
- "port1" (or both) must be defined for "fsl-usb2-mph" compatible
- controllers.
- - port1 : boolean; if defined, indicates port1 is connected for
- fsl-usb2-mph compatible controllers. Either this property or
- "port0" (or both) must be defined for "fsl-usb2-mph" compatible
- controllers.
- - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible
- controllers. Can be "host", "peripheral", or "otg". Default to
- "host" if not defined for backward compatibility.
-
-Recommended properties :
- - interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and level
- information for the interrupt. This should be encoded based on
- the information in section 2) depending on the type of interrupt
- controller you have.
-
-Optional properties :
- - fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the
- port power polarity of internal PHY signal DRVVBUS is inverted.
- - fsl,invert-pwr-fault : boolean; for MPC5121 USB0 only. Indicates
- the PWR_FAULT signal polarity is inverted.
-
-Example multi port host USB controller device node :
- usb@22000 {
- compatible = "fsl-usb2-mph";
- reg = <22000 1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <27 1>;
- phy_type = "ulpi";
- port0;
- port1;
- };
-
-Example dual role USB controller device node :
- usb@23000 {
- compatible = "fsl-usb2-dr";
- reg = <23000 1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <26 1>;
- dr_mode = "otg";
- phy = "ulpi";
- };
-
-Example dual role USB controller device node for MPC5121ADS:
-
- usb@4000 {
- compatible = "fsl,mpc5121-usb2-dr";
- reg = <0x4000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = < &ipic >;
- interrupts = <44 0x8>;
- dr_mode = "otg";
- phy_type = "utmi_wide";
- fsl,invert-drvvbus;
- fsl,invert-pwr-fault;
- };
new file mode 100644
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SOC USB controllers
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description: |
+ The device node for a USB controller that is part of a Freescale
+ SOC is as described in the document "Open Firmware Recommended
+ Practice: Universal Serial Bus" with the following modifications
+ and additions.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl-usb2-mph
+ - fsl-usb2-dr
+ - fsl-usb2-dr-v2.2
+ - items:
+ - enum:
+ - fsl-usb2-dr-v2.2
+ - fsl-usb2-dr-v2.5
+ - const: fsl-usb2-dr
+
+ phy_type:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ulpi, serial, utmi, utmi_wide]
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ port0:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates port0 is connected for fsl-usb2-mph compatible controllers.
+
+ port1:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates port1 is connected for "fsl-usb2-mph" compatible controllers.
+
+ fsl,invert-drvvbus:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ for MPC5121 USB0 only. Indicates the
+ port power polarity of internal PHY signal DRVVBUS is inverted.
+
+ fsl,invert-pwr-fault:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ for MPC5121 USB0 only. Indicates
+ the PWR_FAULT signal polarity is inverted.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - phy_type
+
+allOf:
+ - $ref: usb-drd.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ usb@22000 {
+ compatible = "fsl-usb2-mph";
+ reg = <22000 1000>;
+ interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+ phy_type = "ulpi";
+ port0;
+ port1;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <23000 1000>;
+ interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+ dr_mode = "otg";
+ phy_type = "ulpi";
+ };
Convert fsl-usb binding doc to yaml format. Additional change: - Remove port0 and port1 from required list. - Use common usb-drd.yaml for dr_mode property - Keep two difference examples. - Add interrupts to required property list. - Remove #address-cells and #size-cells in example. - Use predefined irq type macro. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- .../devicetree/bindings/usb/fsl-usb.txt | 81 ---------------- .../devicetree/bindings/usb/fsl-usb.yaml | 96 +++++++++++++++++++ 2 files changed, 96 insertions(+), 81 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/fsl-usb.txt create mode 100644 Documentation/devicetree/bindings/usb/fsl-usb.yaml