@@ -28,6 +28,7 @@
#define PREFETCH_SHALLOW (1 << PREFETCH_SHIFT)
#define PREFETCH_MODERATE (2 << PREFETCH_SHIFT)
#define PREFETCH_DEEP (3 << PREFETCH_SHIFT)
+#define GFX_ACTLR_PRR (1 << 5)
static const struct actlr_config sc7280_apps_actlr_cfg[] = {
{ 0x0800, 0x04e0, PREFETCH_DEFAULT | CMTLB },
@@ -235,6 +236,27 @@ static void qcom_adreno_smmu_resume_translation(const void *cookie, bool termina
arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_RESUME, reg);
}
+static void qcom_adreno_smmu_set_prr(const void *cookie, phys_addr_t page_addr, bool set)
+{
+ struct arm_smmu_domain *smmu_domain = (void *)cookie;
+ struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ u32 reg = 0;
+
+ writel_relaxed(lower_32_bits(page_addr),
+ smmu->base + ARM_SMMU_GFX_PRR_CFG_LADDR);
+
+ writel_relaxed(upper_32_bits(page_addr),
+ smmu->base + ARM_SMMU_GFX_PRR_CFG_UADDR);
+
+ reg = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR);
+ reg &= ~GFX_ACTLR_PRR;
+ if (set)
+ reg |= FIELD_PREP(GFX_ACTLR_PRR, 1);
+ arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR, reg);
+
+}
+
#define QCOM_ADRENO_SMMU_GPU_SID 0
static bool qcom_adreno_smmu_is_gpu_device(struct device *dev)
@@ -407,6 +429,7 @@ static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
priv->get_fault_info = qcom_adreno_smmu_get_fault_info;
priv->set_stall = qcom_adreno_smmu_set_stall;
priv->resume_translation = qcom_adreno_smmu_resume_translation;
+ priv->set_prr = qcom_adreno_smmu_set_prr;
actlrvar = qsmmu->data->actlrvar;
if (!actlrvar)
@@ -154,6 +154,8 @@ enum arm_smmu_cbar_type {
#define ARM_SMMU_SCTLR_M BIT(0)
#define ARM_SMMU_CB_ACTLR 0x4
+#define ARM_SMMU_GFX_PRR_CFG_LADDR 0x6008
+#define ARM_SMMU_GFX_PRR_CFG_UADDR 0x600C
#define ARM_SMMU_CB_RESUME 0x8
#define ARM_SMMU_RESUME_TERMINATE BIT(0)
@@ -49,7 +49,10 @@ struct adreno_smmu_fault_info {
* before set_ttbr0_cfg(). If stalling on fault is enabled,
* the GPU driver must call resume_translation()
* @resume_translation: Resume translation after a fault
- *
+ * @set_prr: Extendible interface to be used by GPU to modify the
+ * ACTLR register bits, currently used to configure
+ * Partially-Resident-Region (PRR) feature's
+ * setup and reset sequence as requested.
*
* The GPU driver (drm/msm) and adreno-smmu work together for controlling
* the GPU's SMMU instance. This is by necessity, as the GPU is directly
@@ -67,6 +70,7 @@ struct adreno_smmu_priv {
void (*get_fault_info)(const void *cookie, struct adreno_smmu_fault_info *info);
void (*set_stall)(const void *cookie, bool enabled);
void (*resume_translation)(const void *cookie, bool terminate);
+ void (*set_prr)(const void *cookie, phys_addr_t page_addr, bool set);
};
#endif /* __ADRENO_SMMU_PRIV_H */
Add an adreno-smmu-priv interface for drm/msm to call into arm-smmu-qcom and initiate the PRR bit setup or reset sequence as per request. This will be used by GPU to setup the PRR bit and related configuration registers through adreno-smmu private interface instead of directly poking the smmu hardware. Suggested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com> --- drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 23 ++++++++++++++++++++++ drivers/iommu/arm/arm-smmu/arm-smmu.h | 2 ++ include/linux/adreno-smmu-priv.h | 6 +++++- 3 files changed, 30 insertions(+), 1 deletion(-) -- 2.34.1