diff mbox series

[v2] gpio: ath79: convert to dynamic GPIO base allocation

Message ID TYCP286MB089598EA71E964BD8AB9EFD3BCD62@TYCP286MB0895.JPNP286.PROD.OUTLOOK.COM
State New
Headers show
Series [v2] gpio: ath79: convert to dynamic GPIO base allocation | expand

Commit Message

Shiji Yang June 26, 2024, 12:33 a.m. UTC
ath79 target has already been converted to device tree based
platform. Using dynamic GPIO numberspace base to suppress the
warning:

gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.

Tested on Atheros AR7241 and AR9344.

Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
---
Changes v1->v2:
  Do not set ctrl->gc.base=-1 as it's already the default value.

v1: https://lore.kernel.org/linux-gpio/TYCP286MB08958A751BD29BB5B04485D9BCD52@TYCP286MB0895.JPNP286.PROD.OUTLOOK.COM/

 drivers/gpio/gpio-ath79.c | 2 --
 1 file changed, 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-ath79.c b/drivers/gpio/gpio-ath79.c
index f0c0c0f77eb0..6211d99a5770 100644
--- a/drivers/gpio/gpio-ath79.c
+++ b/drivers/gpio/gpio-ath79.c
@@ -273,8 +273,6 @@  static int ath79_gpio_probe(struct platform_device *pdev)
 		dev_err(dev, "bgpio_init failed\n");
 		return err;
 	}
-	/* Use base 0 to stay compatible with legacy platforms */
-	ctrl->gc.base = 0;
 
 	/* Optional interrupt setup */
 	if (!np || of_property_read_bool(np, "interrupt-controller")) {